though its working on windows7, am unable to make it work on ubuntu 32 bit 9.10... for that matter, even an external mic doesn't work here... the sound recorder doesn't capture any sound; and even if i increase the input volume under volume control, all that i get is noise ("chissshhhh")
View 1 Replies
I just updated my kernel to the latest version (2.6.35-24). Now my suspend function on my Thinkpad SL510 no longer works. The system simply hangs with a solid cursor in the corner of a black screen. USB devices remain powered on, HDD keeps spinning, and all indicator lights remain lit. When this happens, the only thing I can do is hold the power button down for a hard power off.My first thought would be to troubleshoot this with dmesg, but I don't know how to record dmesg after a power off. The message buffer is reset when I reboot.
View 1 Replies View RelatedI can only log into X with "vesa" driver (otherwise it gives me the black screen) and ubuntu never boots directly into GDM, always the console.
View 1 Replies View RelatedI recently rebooted my computer, switching from Vista to Ubuntu 10.10, 32 bit. I've had troubles with my webcam ever since. I've tried every single suggestion from the Ubuntu Forums and nothing works, and I am now quite desperate..
I'm installed Cheese but nothing else than a green dotted screen appears, I've also tried gucview which tells me that my webcam is recognized under the name of USB 2.0 Camera.
When I enter lsusb in the terminal, here is what appears:
natacha@natacha-EasyNote-MX36:~$ lsusb
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code].....
The webcam doesn't work with any program, but since it does partially work with Cheese, I would think that I either have to install an additional driver or that my camera is not compatible with Ubuntu, which would really suck.
The closest similar case I've found on the net was this one : [URL] . Apparently it's about a Bug 16575 but the problem doesn't seem to have been resolved either.
I bought a Dell Inspiron with pre-installed ubuntu. All has been working for the last year and recently my integrated webcam stopped working. I was trying to use it on skype and it did nothing, although the program recognises I have a webcam, I tried cheese and the power light on my webcam comes on but again the screen does nothing.
View 9 Replies View Relatedinternet does not work,,, it used to be perfectly fine in 9.10 but every since i upgraded it did not work,so that in my ubuntu machine i can fix other problems.....
View 1 Replies View RelatedThe two integrated USB ports on a laptop of mine running Ubuntu 10.10 mysteriously stopped working a while back after some random updates. They still have power, and they are still recognized by the system, as per lsusb:
Code:
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
But although the ports still power up any connected appliances, they won't actually function. Any mouse I've tried so far won't work, nor will any external USB drive mount when connected. I don't even know where to begin to look. I believe the problem arose after an update to the xorg server, but I'm not sure. I just updated the kernel to 2.6.35-27, but that didn't solve the problem.
I'm trying to get sound from Ubuntu 10.04 out thru the integrated realtek alc850 chipset to my home theatre via the spdif port. I installed the drivers from realtek but still no sound. Under Places-Preferences-Sound, only the IEC958 shows up. What else should I do? Neither Rhythmbox nor Alsa show the Realtec spdif.
View 1 Replies View RelatedI am using a Lenovo G530 and installed ubuntu. i previously used Windows 7 ultimate so when i installed ubuntu I partioned disks. My wireless is not working and have followed the advice in this forum to the letter put i would get an erorr message that says that the e drive is inexesible.
View 1 Replies View RelatedIt works under Windoze but in Linux the integrated mouse doesn't work. Whilst it's forced me to learn some keyboard shortcuts, the mouse would help a lot.
This is my media PC. I run currently run Mandriva 2008 & use Kafiene to watch/record etc TV.
I've instlled ubutnu 10.04 LTS on my lenovo y550 laptop. My wireless network is not working, I can connect by wire, and my wireless network is working on windows (similar like here http://ubuntu-virginia.ubuntuforums.....php?p=9613210 ). When i right-click on metwork connections icon in the upper right panel "Enable wireless" option is disabled and I can't enable it. I can't enable it with fn+F5 buttons either.
lshw -C network:
Code:
*-network DISABLED
description: Wireless interface
product: PRO/Wireless 5100 AGN [Shiloh] Network Connection
vendor: Intel Corporation
[code]....
Tried the normal fixes and installed the wrapper, etc. Wired network works fine, and I am able to access some unlocked wifi networks from neighbors, but I cannot access my own password protected network. It just keeps asking for the password and never connects. Fairly new Ubuntu guy here.
[code]....
I have a desktop computer with integrated ATI graphics. Specs below and lspci log attached. I was running 9.04 Jaunty Jackalope until 1 week ago. Everything worked fine from the day I installed it. It's default driver worked fine and graphics requiring applications like Google Earth and Secret Maryo Chronicles (game) ran smoothly. Then about a week or so ago I did a clean install of Lucid on this PC. And now Secret Maryo Chronicles runs choppy and Google Earth doesn't run and display images smoothly. I could understand having problems like this if I were switching to Fedora or something but I'm still using the same distro (and both are recent versions).
Computer Specs:
ATI Radeon Xpress 200 integrated graphics with 256 MB RAM
Intel Pentium 4 clocked at 3.00 Ghz
2 GB RAM (.25 being used for graphics card)
500 GB Hard drive (355 for Ubuntu)
2 DVD drives
Does everything work out of box (i might be dreaming...), but that'd be awesome and I might just buy an SL510 just for that reason. Im talking everything, ports, power/hibernate/etc, sound (esp), etc
Also, how well would Ubuntu AND Compiz run on a Intel Graphics Media Accelerator 4500MHD video card and Intel Core 2 Duo processor P7570 (2.26GHz, 1066MHz, 3MBL2, 25W)?
I'm trying to change the backlight via xbacklight but this is not working. Although
Code: Select allxbacklight -set X
causes
Code: Select allxbacklight -get
to return X, the real monitor backlight is unchanged.
The XF86MonBrightnessDown (fn+some-key) isn't working either, although it may have been working earlier.
How can I further debug this issue?
Why are the extensions ["", "txt", "text"] "not allowed" for upload?
I tried stracing the xbacklight call, I'm including the output, but I can't make anything out of it.
Is there a way to do this via xrandr or is there a lower-level way?
I previously had a dual output Nvidia 7300le which worked fine with 2 monitors (2xDell e196fp). Now however I have just added a new monitor to my setup (and a different graphics card). I've gotten to the stage where it recognises all 3 monitors (2xdell 196fp and 1x samsung syncmaster) and also the new graphics card (Nvidia PCIe 210)...it took me ages to get to this stage and a lot of hacking around in the bios!
I've got it so that it runs two monitors fine (the two connected to the graphics card) but I cant manage to extend the desktop onto the monitor connected to the integrated GPU (I can on windows). It definitely recognises it as when I startup it gives me a command prompt on the 3rd window (integrated gpu) and then when I do startx it runs the session on the other two monitors!
[Code]...
So I did the update to Natty and it went pretty smoothly, with one exception. My rig has two sound cards in it: the integrated motherboard sound card (Intel HDA audio) that I don't use, and a Sound Blaster Audigy (the original Audigy 1) that I do use.
This setup has worked fine in Ubuntu for as long as I can remember, but after the upgrade to Natty it appears that GNOME no longer knows that the Audigy is the card that's in use. It insists on routing things like volume changes via gnome-volume-control to the motherboard. I can confirm this by watching the volume levels for each card in alsamixer while modifying them in gnome-volume-control; the levels move appropriately on the integrated card, and stay stuck on the Audigy.
What makes this bizarre is that it's not that the Audigy isn't recognized -- it's shown in the "Hardware" tab of Sound Preferences, and the system plays back audio just fine through the speakers connected to the Audigy. It's just that I can't change the volume on the sound through the panel applet anymore. Normally I would fix something like this by using the Hardware tab to switch from the one card to the other, but in this case when I make that change it doesn't stick -- if I close the Sound Preferences and then open it again, it's right back to being set to the integrated audio.
Maybe this is a PulseAudio issue with older Audigy cards? I have no idea.
I can change the volume with my speakers' volume knob and my keyboard's media keys, I suppose, but I'm so used to be able to change it via gnome-volume-control that not being able to feels bizarre. Has anyone else out there with add-on sound cards installed alongside motherboard audio experienced this?
As the title states, I'm having trouble getting WiFi working. I do have the firmware-realtek package installed.
lspci gives out the following information only:
Code: Select all01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 03)
Is there a way to record streaming audio from an integrated motherboard.
View 3 Replies View RelatedDell Inspiron with dual integrated mics. I get no sound when i try to record with the integrated webcam. I have everything turned all the way up in the mixer, ie: mic, capture, mux, etc but still no sound.
View 2 Replies View RelatedI have a Lenovo SL510 thinkpad (CPU 1.80GHz / 2GB / 250GB SATA / Intel GMA X4500 / 15.6" HD LED says the website), totally fresh, just got it today. My goal would be to install Kubuntu 9.10 on this machine. When I try the live CD, screen just goes black, after a while it plays what I assume to be the welcome music. If I try the conventional install screen is just black. The safe graphic mode yielded two grey _, one in the 1/5 and one in the 4/5 of the screen.
View 9 Replies View Relatedrecently installed fedora 14 on my lenovo ideapad y530.
Linux bardot 2.6.35.9-64.fc14.x86_64 #1 SMP Fri Dec 3 12:19:41 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux
here is my audio device:
lspci | grep Audio
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
it has surround speakers and even a subwoofer. unfortunately only the two side speakers work. how to make ALL my speaker system work?
I've got a handy new Lenovo G560 running with OpenSUSE 11.3 64-bit. After a normal out-of-the-box installation the laptop speakers failed to mute when I plugged in headphones and I was only able to regulate the sound for both the speakers and the headphones simultaneously. Then I installed a whole lot of ALSA stuff and my sound devices were recognized as "PulseAudio server (local)". Speakers muted when I plugged in headphones - a big yay.
Now, though, my microphone doesn't work any more. It worked before, I'd talked on Skype with it, but upon trying to make a call with Skype today I noticed that it didn't work any more. Sound's turned up in KMix, so everything should be okay - does anybody know how to get my microphone working again?
Alright, I'm new to linux, I've googled for days, but I can't for the life of me get my internal mic working. It doesn't register sound in the sound preferences menu, it is not muted.
I have the x120e with the E-350. New install of Ubuntu 11.04 64-bit.
Where to start?
I have a PCI graphics card, Nvidia Geforce FX 5500, but can't get it to work. I have 10.04 installed on a Dell Dimension 3000, P4, 1Gb RAM, integrated graphics. I installed 10.04 without the card in the machine, then shut down and plugged the card in and booted it up again (BIOS setting is 'onboard' for integrated graphics, 8Mb; only other option is 'auto'). Checking the hardware drivers I can see the recommended Nvidia drivers (v173, not yet activated) and lspci gives me the integrated as well as the Nvidia listing:
01:02.0 VGA compatible controller: Nvidia Corporation NV34 [GeForce FX 5500] (rev a1)
00:02.0 VGA compatible controller: Intel Corporation 8286G Integrated Graphics Controller (rev 02)
So far so good, but that's where it ends. Changing the BIOS setting to 'auto' turns the screen off on reboot, both for the monitor connected to the VGA port of the Nvidia card and for the monitor connected to the VGA port of the motherboard. I have to shutdown, take the card out and set the BIOS back to 'onboard' to be able to boot again (and shutdown, plug the card back in and boot up again to get back to where I was).
Activating the recommended hardware driver and rebooting (still with BIOS set to onboard) gives a blank screen (screen is still on and there may have been a flash of the purple screen with the ubuntu logo); nothing else happens no matter how long I wait. Rebooting doesn't help, it turns off the screen; same result for booting in recovery mode. I can get to the GRUB bootloader and when I replace 'quiet splash' with 'nomodeset' I manage to boot again with the monitor connected to the VGA port of the motherboard, but am not anywhere closer to getting my monitor working on the Nvidea card.
Anyone have any comments or issues with running debian on a Thinkpad SL510?
[URL]
It has the Intel GM45 chipset, Intel Core 2 Duo, and Intel GMA 4500MHD video. I guess I am concerned about the wireless as well but cannot seem to fine the brand card it has.
I have an Acer 1200X with an Nvidia 8200 graphics GPU integrated on the motherboard. I have an HDMI and VGA output. I have downloaded the Nvidia graphics driver using envyNG and the old fashioned way. I have tried configuring the monitors 15 ways from Sunday in the configuration and I cannot for the life of me get dual monitors to work.
When I go into configuration with the Nvidia wizzard it blanks like its going to work then just stays black with the mouse cursor. I also cannot save as I get a "parsing" error. I am using Ubuntu 9.10 and have even tried using envyNG to get the monitors to work on twinview... NOTHING Hope someone can help!
My dad who is a Linux nut came over to help and he left 3 hours later because were tempted to chuck the computer out the window...I need to figure this out as this is going to be my work computer and I need dual screens.
I am fairly new to Ubuntu, so I'm sorry if I don't include any necessary information. Installed 10.10 rc from CD about 3 days prior to official release and everything was working fine... went about installing software and setting up laptop for use. About one week later, got prompted for upgrade and went ahead through update manager. Now can't enable desktop effects. Right after upgrade had a period where title bars of windows would not display... menus were present, but no title bars, no maximize/minimize/close buttons and no dragging windows to new locations on screen That has since resolved itself. Spent quite awhile searching forums, created xorg.conf at one point, later deleted it.
compiz-check says this:
Code:
./compiz-check
Gathering information about your system...
Distribution: Ubuntu 10.10
Desktop environment: GNOME
Graphics chip: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
Driver in use: intel
[Code]...........
I have recently upgraded to Ubuntu 10.10. However the bottom of the screen is cut off with only a trace of it visible. I had similar problems with version 10.04 where both and top and bottom of the screen were not displayed.
I have noticed that version 10.10 does not use the proprietry driver the previous versions used.
In desparation I have tried Kubuntu but the results are still much the same.
Does anyone have any idea how I can display a full screen with an Nvidia integrated graphics controller.
I really wanna use the OS. I wiped my laptop and installed it but I can't change my screen resolution (it's stuck at 1024 X 768 and my refresh rate is at 0 HZ) I tried installing a driver that was for both the i9xx and i8xx chipset family but it doesn't look like it helped anything. I want to be able to play World of Warcraft Wrath of The Lich King but when I try it the way the computer is now the the frame rate is really really slow. I also need to fix my audio because there's crackling that comes from the speakers often. I attached a screen shot of what I get when I enter the command: sudo lshw -c video Changing the resolution isn't the problem so much as the fact that I can't change the refresh rate from "0 HZ" to anything higher so that my game will play smoothly. I would also like to put compiz fushion on my laptop as well but I don't believe it will work unless I resolve this problem.
View 9 Replies View Related
