Ubuntu Multimedia :: How To Get LMMS More Performance Speed
Nov 24, 2010
I have A dell vostro v13. I am have installed LMMS which runs ok if I put minimal demands on it but if I start putting to many demands on it like running More then three Zynaddsubfx plugins or multiple sample players the cpu moniter goes into the red and it starts to sound bad and slow down a great deal. I know a small laptop is probably not the best choice to run a DAW on unless it has a good processor but this is the only computer I currently have and I really like LMMS. Is there any way I can get more performance out of my computer? I looked a little into overclocking but dell Bios Does not allow for this. Is there any tricks that I can do to get LMMS to perform better given the limitations of my system?
View 5 Replies
ADVERTISEMENT
Aug 23, 2010
I noticed that, when choosing different notes, LMMS not only changes the pitch of the instrument, but also the speed. So, if an instrument makes a sound that lasts about 5 seconds, a really low note can make it last about 10 seconds, and a really high note can last about 1 second. Is there a way to configure how LMMS handles sounds so that it changes their pitch, without changing their speed?
View 2 Replies
View Related
Jul 31, 2010
I just wanted to know if having my laptop set to ondemand, will this affect performance in any way? I realize it increases the clock speed to performance when the CPU is under load, but does the time it take to go from ondemand to performance affect speed? Will there be any noticeable difference between the two setups? I have a dual core intel at 2.2GHz when in performance. When ondemand is set with no load it downclocks to 800Mhz.
View 7 Replies
View Related
Aug 19, 2009
I have been trying to install lmms on my Slackware 12.1 system.I have installed QT, cmake in order to compile the source.
It seemed to install correctly (after a bit of reading about how cmake works....) but gives me this on run:
Quote:
bash-3.1$ lmms
Notice: could not set realtime priority.lmms: symbol lookup error: lmms: undefined symbol: _ZN8QPainter10drawPixmapERK7QPointFRK7QPixmap
bash-3.1$
So my understanding is that it is missing a file or command associated with the program, through it not being linked or not existing. Is there any way I can find out where it thinks this file/data should be, so as to ascertain what libs/packages have it? As far as I can tell, I have all dependencies satisfied.....
View 2 Replies
View Related
Sep 1, 2011
I have installed the lmms-vst package (converted from a deb package) but I still not see the VeSTige Instrument in the Instrument plugins list. I really want to use VST plugins.
View 1 Replies
View Related
Mar 6, 2011
I have an older PC running Ubuntu 10.04, and the system is slow, especially with Firefox running. I recently upgraded to 2 gig memory, but it didn't help. I have plenty of space on my hard-drive, using only 30 gig of 80 gig. My CPU is Intel Celeron 2.40GHz. I have broadband, and the speed seems good. What are the system requirements for Ubuntu 10.04? Any tips for speeding performance, esp on Firefox? I used to do a defrag when I had Windows; is there any need to do that on Ubuntu also?
View 9 Replies
View Related
Feb 1, 2011
I have recently upgraded to a M4A77TD motherboard and 8Gig of memory.I have a AMD Athlon(tm) II X4 645 Processor, and I cant say that I see much improvement over the one that died. I have noticed that the HDD light is constantly flashing so I wondered if I couldnt use some of the Ram to create a ramdrive to speed things up . So ..my question ... what should I put on my ramdrive? My own thoughts were the var and usr directories. I would load the ramdrive at startup (which would slow down my startup) And Rsync back again on shutdown.Has anyone done this? Ive had a look through the forum but cant see anything ..but my search terms may not be all that good.
suse linux 11.1 64 bit
var=0.3G usr=5M lib=0.2G opt=0.6G sys=0.6G
As far as I can see swop is never used
View 11 Replies
View Related
Nov 2, 2010
My desktop tower is pretty old and runs horribly slow nowadays. I only use it for a little internet browsing and to upload photographs etc. It runs on 1Gb RAM and has the celeron(R) 2.4GHz processor. What is the best way to boost overall performance speed/response times? would a better processor be viable?
View 5 Replies
View Related
Jun 30, 2011
I'm new to openSUSE and my computer is quite slow although my computer isn't that bad. I opened up ksysguard and it appears that my CPU is the bottleneck. My CPU usage is usually 100%, then after a few seconds, it goes down to 20-60% and then it goes back up to 100% after another few seconds. It says I have 141 processes running (I don't know if that's normal or not).
My Specs are:
CPU: AMD Duron (tm) processor 1.8GHz
Graphics Card: NVIDIA GeForce 6200
Memory: 2GB RAM
I'm using KDE.
View 9 Replies
View Related
Jan 5, 2011
I have recently migrated my file server over to a HP Microserver. The server has two 1TB disks, in a software RAID-1 array, using MDADM. When I migrated simply moved the mirrored disks over, from the old server Ubuntu 9.10 (server) to the new one 10.04.1 (server).I Have recently noticed that write speed to the RAID array is *VERY* slow. In the order of 1-2MB/s order of magnitude (more info below). Now obviously this is not optimal performance to say the least. I have checked a few things, CPU utilisation is not abnormal (<5%) nor is memory / swap. When I took a disk out and rebuilt the array, with only one disk (tried both) performance was as to be expected (write speed >~70MB/s) The read speed seems to be unaffected however!
I'm tempted to think that there is something funny going on with the storage subsystem, as copying from the single disk to the array is slower than creating a file from /dev/zero to the array using DD..Either way I can't try the array in another computer right now, so I though I was ask to see if people have seen anything like this!At the moment I'm not sure if it is something strange to do with having simply chucked the mirrored array into the new server, perhaps a different version of MDADM? I'm wondering if it's worth backing up and starting from scratch! Anyhow this has really got me scratching my head, and its a bit of a pain! Any help here would be awesome, e-cookies at the ready! Cheers
View 6 Replies
View Related
Jun 8, 2010
I installed it yesterday and was disappointed that no sound played
View 3 Replies
View Related
Feb 7, 2009
I have openSUSE 11.1 on a ppc machine.I have enabled all the repos, adding to it the packman repo and the GNOME community and GNOME stable repos.I see most of the dependencies there, but a few aren't there. Specifically, ladspa-foo-plugins is keeping me from installing it right now. Does anyone know of a repo that supplies all the dependencies for lmms?
View 2 Replies
View Related
Jan 1, 2010
I installed LMMS 0.4.5 on my computer (Ubuntu 9.10), but I'm getting no sound output from the program on ALSA, and whenever I try one of the other options (PulseAudio, OSS, etc.) it reverts to dummy audio. I tried installing JACK to correct the problem, but JACK seems to be giving errors and quitting, and in the past I've always used ALSA for LMMS and it's worked just fine.The problem is local to LMMS, even after a reinstall. My audio output is fine for all other programs I've tested the problem for so far.Also, I just noticed that my instances of LMMS are not being terminated after the windows are being closed...
Notable system info:
Ubuntu 9.10 x86 (kernel 2.6.31-16-generic) installed via Wubi
LMMS 0.4.5 (installed via Ubuntu Software Centre)
3.06 GHz Pentium IV (it looks like dual core)
432 MiB RAM
ATI IXP 584x0 High Definition Audio Controller (according to the lshw command
View 5 Replies
View Related
Jun 15, 2010
i'm having a problem with lmms. unlike some posts in the forum, my lmms does output sound, but after a few minutes it crashes. the program itself will just happily go on, but any sound crashes. i hear a glitch, en thereafter no more sound. the only way to fix it is restarting lmms, which is quite a pain in the *** if you have to do that every 5 minutes . the problem occurs to me every time i use lmms, so it is consistent. it seems to me that it crashes faster when i have a bar that includes somekind of chord; a single tone it can handle, but when there's bi- tri- or multiple tones, it just crashes nearly instantly. i've tried both alsa and pulseaudio, and both have the same problems. and it's not my overall sound that's crashing: rhytmbox and videos will just continue to play sound .
View 3 Replies
View Related
Sep 8, 2010
I have madfuload installed and ubuntu (lynx normal not studio) recognizes it.I can even select keyrig under midi devices, but when I press any of the keys nothing is registered. no notes or sounds.I'm using alsa since lmms works better with that then jackmy input/output setting in lmms is alsa-sequencerlsusb:Bus 002 Device 006: ID 0763:019b Midiman KeyRig 49
cat /proc/asound/cards:
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xfebfc000 irq 16
[code]....
View 1 Replies
View Related
Jul 23, 2011
Ubuntu 64bit. The sound system works and plays noises correctly when I test the speakers in sound preferances. The internet BBCi player(Radio) plays sound correctly. Banshee & Rhythmbox try to play music files at double, or more, speed with no sound output. Spotify Linux version also tries to playback at double speed with no sound output. Media Player attempts to play music files at high speed. Media player plays the Video and audio tracks at high speed. VLC Will play the video at normal speed but with no audio.
View 1 Replies
View Related
May 9, 2011
so i don't know what happened, but all multimedia files are suddenly speed up/and-or with no sound (ubuntu 11.04 with all recent updates, firefox 4, adobe flash-instick etc.)
if i try to play a flash movie on for instance videos it's sped-up with no sound, if i play an mp3 song (i use exaile) the bar is sped up and there's no sound either, if i start an avi movie (vlc) it's not sped up but there's no sound though.
when i log in to the system the logging in jingle is not playing, so basically the sound just got turned off for some reason but according to the soundbar it should be on.
this problem started just recently. i don't know if it has to do with recent updates or that my log in re-started a couple of times after using a kde program (kmess).
View 4 Replies
View Related
Mar 1, 2010
I have a custom built PC with a AMD 9650 2.3ghz quad core, 4gig of ram, nvidia geforce 9500gt graphics card. With windows 7 my movies look immaculate but I want that from Linux. My first problem consists of lines in my players. To test out the performance I am playing Final Fantasy 7: Advent Children Complete Blu-Ray. The video file has been ripped and placed on the HD. MPlayer has lines everywhere, VLC is very good but line every once in a while, XBMC plays bout as well as VLC. The first part that confused me was how MPlayer was worse off. I have followed all the stickies and this is a fresh install of ubuntu 9.10. The Second problem I am having is getting my onboard audio to work. My board comes with 8 channel audio support but my 2 side/back speakers wont work. I have messed with the application settings and the actual settings in Sound Preferences.
Here is a link to my board specs
Code:
[URL]
View 3 Replies
View Related
Jul 24, 2010
I'm trying to get the best performance/quality on my my 10.04 box and i have a few questions regarding 'sync to vblank'. My first question : I see 'sync to vblank' in 3 different locations.
- In compiz display settings
- In NVidia XVideo settings
- In NVidia OpenGLX settings
What is the difference between the 3 ?
Second question : I used to have problems watching movies where the picture seemed to be cut in half ( i'm not a native english speaker so i don't know the technical term). After reading some forums, i enabled sync to vblank everywhere i saw it. That solved the movie problem. But maybe that was overkill ?
So i did some benchmarking and noticed the following :
When i disable 'sync to vblank' in compiz my compiz benchmark drops from 60 to 30. But then my movies look worse.When i disable 'sync to vblank' in NVidia OpenGlx my GlxGears framerate jumps from 300 to 36000.I didn't notice anything when changing vsync in the NVidia XVideo setting. System specs below.
Ubuntu 10.04 64b
Nvidia GT 230 1536MB
NVIDIA Driver Version : 195.36.24
View 2 Replies
View Related
Jul 27, 2011
I've installed an older Intel/Compaq Evo machine with a single core 2.0 Ghz. processor and 2 GB of DDR ram in our livingroom, for movie viewing purposes. I'm intentionally using Xubuntu 11.04 without 3D to keep the used resources down to a minimum. There are no 3D games on this machine either since I'm using it strictly for watching movies on our TV. The graphic card is integrated with the 845 chipset/mainboard. It does receive up to 64 MB of Ram though which is drawn directly from the onboard 2 GB DDR. The following links provided me some linux related info. about this chip but I honestly have no idea how to use that since the intellinux site is set up horribly (IMO).
[URL]So with a 2 Ghz. processor, low resources, 2 GB of DDR, of which 64 MB is dedicated to the graphic chip, I figured that playing movies wouldn't be a problem .. and it's almost not. I can play wmf, avi, mp3, and other codecs without any problem at all. Even BlueRay works fine as long as they're AVIs. But as soon as I try to play an MP4 movie the experience gets very unpleasant. No crashes, just endless stuttering and sometimes lack of audio. Is there perhaps some way that I can improve that performance permanently without buying another graphic card? The machine is an ultra slim form factor so I can't even add a narrow format card to it.I'm stuck with the embedded 64 MB chip but I'm hoping that someone here can help me to get the most out of it
View 5 Replies
View Related
Dec 6, 2010
my friend has a dell inspiron 4600 desktop that we recently install ubuntu on to replace windows xp on. now when we try to play some hd videos in vlc player it's pretty low frame rate but i'm not sure why. if we play 720p on videos it's pretty low frame rate too. in windows xp he could play these videos flawlessly. we tried installing a nvidia driver but it stops the desktop from working. in 10.04 the driver installed fine, however, in 10.10 after installing the driver on next boot it would start up at just a terminal. not a terminal window but just a black screen with white text on the entire monitor. i could only fix it by editing the xorg.conf changing a field that said "device: nvidia" to "device: nv". that driver may also be causing a problem.
if i cannot find a solution we will reinstall windows xp which i rather not do because i think ubuntu runs better. also, we installed xubuntu-desktop package so we are running xfce instead of gnome.
View 9 Replies
View Related
Mar 24, 2011
Is there anything I can do in Ubuntu 11.04 to get the Intel 945GM to work more stable and run faster? It won't load the Unity interface at ALL. It won't load the Classic Desktop unless I use the one without effects, or else the title bars disappear. Is there something I can do to make it more stable, and run more efficiently?
View 4 Replies
View Related
Jan 19, 2010
Is there anything that can be done to increase video streaming performance?The general impression I got is that it's mainly an adobe problem and not much can be done, though currently streaming is nearly unwatchable. When I switch from full screen to normal size many of the players freeze, ..... HD is unwatchable etc.
View 9 Replies
View Related
Jul 28, 2010
Does anyone know of a program that can create effects like reverb/echo during a live performance? I like Audacity, but it seems you can only do this kind of stuff to audio that has already been recorded, not while you are performing it live.
View 1 Replies
View Related
Jan 1, 2011
I posted a few weeks ago about Flash performance in Firefox vs. Google Chrome. Thanks to all those who responded. I finally figured out the problem in Firefox, it was Compiz desktop effects. With effects off, flash in Firefox is just as fast as Google Chrome. I am not sure why Compiz only affects Firefox Flash, but apparently Chrome is not affected. I know there are a lot of posts about this topic, so before driving yourself nuts installing FlashAid, and running terminal commands, try disabling desktop effects first.
View 3 Replies
View Related
Apr 29, 2011
Using either MPlayer or mplayer2 under the video player SMplayer, when clicking on any drop-down menus, the video will freeze and then skip. Once the drop-down menu animation has completed, the video playback will play normally. This happens when using VDPAU to play back H.264 MKV files. Audio playback of the video is never interrupted. why VDPAU will not play nice with SMplayer & Compiz?
System Info:
AMD BE-2400
1GB System Memory
Natty Narwhal 11.04
Ubuntu Classic with Effects
Nvidia 9500GT
Video Driver 270.41.06-0ubuntu1
View 1 Replies
View Related
Jun 23, 2011
My problem is that my computer plays MTS videos very bad (the videos get freeze, etc) in Ubuntu 11.04. I tested many players, but I didn't get good performance during the playback in any of them.
However, in the same computer, I use K-Lite Codec Pack in Windows XP and MTS videos are fine!
Is there any way to play MTS videos in Ubuntu very well?
Performance is excellent in both operating systems (XP and Ubuntu 11.04).
View 6 Replies
View Related
Jan 25, 2010
So for the last, oh, three or four hours now, I've been trying to get videos to play properly in Ubuntu. I have the default player, I have vlc, I (apparently) installed mplayer, but it won't play anything at all.
I was having horrible screen tearing with standard definition .avi's in vlc, fixed that by setting vsync in catalyst control center to always on or whatever it is.
Now, I have tried to run a 720p x264 video. It PLAYS, but not well. Audio is fine, however video is all jerky in VLC, and in Totem it's just a mess of screen tearing (although the video does no jerk on that player).
I have just spent HOURS trying to get VIDEOS TO PLAY. This makes no sense. Playing a video should be the simplest thing in the world for any OS to do, but with Ubuntu it is like pulling teeth. I have NEVER been so frustrated while using a computer. What is going on here?
BTW, I installed every single thing needed to use mplayer but it still does not work. The player comes up but will not play any type of file.
My system specs:
2.2Ghz dual core (intel)
3gb ram
1GB radeon hd 4650 vid card
asus ipibl-lb mobo
I was really enjoying Ubuntu until I got around to trying to watch some videos. Now I am maybe minutes away from going back to vista. At least on there I can watch full 1080p videos if I want with no problems.
View 9 Replies
View Related
Apr 16, 2010
I am running kubuntu 9.10 on a dell inspiron 14 with an intel GM45 graphics card. When I run 3d games like Nexuiz, openarena and tremulous I get really random performance. Sometimes things are totally playable with somewhere between 50-80 fps and other times I get maybe 4 fps and everything takes forever to load. These effects persists between logouts, X restarts and reboots! I get no errors when I run things in console either.I never really play games much but when something doesn't work...
View 8 Replies
View Related
Aug 3, 2010
I'm using Lucid and there is a noticeable drop in performance when using flash under Ubuntu. Video playback appears to be much more choppy than in windows. The driver I'm using according to an xorg config file I made was just "intel." Are there any options I can configure to get it to run more smoothly? The computer itself is a laptop - Toshiba Satellite m45-s331. I tried using gnash and others but they are even worse than the Adobe flash.
View 1 Replies
View Related
