I have installed the lmms-vst package (converted from a deb package) but I still not see the VeSTige Instrument in the Instrument plugins list. I really want to use VST plugins.
View 1 RepliesI have been trying to install lmms on my Slackware 12.1 system.I have installed QT, cmake in order to compile the source.
It seemed to install correctly (after a bit of reading about how cmake works....) but gives me this on run:
Quote:
bash-3.1$ lmms
Notice: could not set realtime priority.lmms: symbol lookup error: lmms: undefined symbol: _ZN8QPainter10drawPixmapERK7QPointFRK7QPixmap
bash-3.1$
So my understanding is that it is missing a file or command associated with the program, through it not being linked or not existing. Is there any way I can find out where it thinks this file/data should be, so as to ascertain what libs/packages have it? As far as I can tell, I have all dependencies satisfied.....
I installed it yesterday and was disappointed that no sound played
View 3 Replies View RelatedI have openSUSE 11.1 on a ppc machine.I have enabled all the repos, adding to it the packman repo and the GNOME community and GNOME stable repos.I see most of the dependencies there, but a few aren't there. Specifically, ladspa-foo-plugins is keeping me from installing it right now. Does anyone know of a repo that supplies all the dependencies for lmms?
View 2 Replies View RelatedFull Wine is installed, so VST should work. All VST plugins cause LMMS to hang. However, the dials and such on the plugins are responsive, so I think its a problem with LMMS. For that matter VST works perfectly under Reaper, which is a platinum rated Windows program running under Wine.
View 4 Replies View RelatedI did installed LMMS [URL] in Ubuntu 10.10, but it did installed the 0.4.5 version which is not very stable, I wanted to install the latest 0.4.9 (which in the Windows version is much better than the 0.4.5).
View 4 Replies View RelatedHow can I turn the metronome off in lmms? It seems like it should be a simple thing to do, but I don't see how.
View 2 Replies View RelatedI did see another topic on this forum regarding VSTs in LMMS, but it didn't solve my problem. I am running using the 64-bit testing branch of debian, which may be causing some of my problems. I tried compiling LMMS myself, but I ran into an issue with wine when it tried to compile RemoteVstPlugin.
It seems as though wine didn't install winegcc or any other tools like that. After a while, I did manage to find winegcc and some of the other tools in /usr/lib/x86_64-linux-gnu/wine/bin. I decided to add some symlinks in /usr/local/bin to point to winegcc, wineg++, winecpp, and winebuild. After that, it seemed to give a different error message, but still failed to compile. It now gives me the following error:
Code: Select all[ 83%] Generating RemoteVstPlugin
/usr/bin/ld: Relocatable linking with relocations from format elf64-x86-64 (/usr/lib/x86_64-linux-gnu/wine/wine/libwinecrt0.a(exe_entry.o)) to format elf32-i386 (RemoteVstPlugin.Azfbf1.o) is not supported
winebuild: /usr/bin/ld failed with status 1
[Code] ....
I may be missing some dependencies because I couldn't run build-dep without removing skype but I don't think that's the problem. I thought the above problem may have something to do with wine, so I was going to try compiling wine to. I ran into problems with that, and ditched that idea. I really don't know what to do anymore. I can't just disable VST support, because that's why I tried to compile LMMS by myself to begin with!
Whenever i close LMMS, it's still running in the background until i kill the process. How can i get it to exit normally?
View 2 Replies View RelatedI have A dell vostro v13. I am have installed LMMS which runs ok if I put minimal demands on it but if I start putting to many demands on it like running More then three Zynaddsubfx plugins or multiple sample players the cpu moniter goes into the red and it starts to sound bad and slow down a great deal. I know a small laptop is probably not the best choice to run a DAW on unless it has a good processor but this is the only computer I currently have and I really like LMMS. Is there any way I can get more performance out of my computer? I looked a little into overclocking but dell Bios Does not allow for this. Is there any tricks that I can do to get LMMS to perform better given the limitations of my system?
View 5 Replies View Relatedwhy dont lmms work on ubuntu karmic 9.10?
View 2 Replies View RelatedI'm not able to use lmms with vst plugin.
Here is what I did:
I downloaded url.unzipped it into /home/georges/vst-plugin/ because this is my vst plugin directory then went to instrument plugins,dragged vestige into song-editor clicked on Default preset clicked on Open other VST-plugin selected 4Front Piano.dll
clicked ok, and I get this error popup:
Quote:
The VST-plugin /home/georges/vst-plugin/4Front Piano.dll could not be loaded for some reason.If it runs with other VST-software under Linux, please contact an LMMS-developer!
I'm running lmms 0.4.10 on a Fedora 13 laptop.
Code:
[root@t61 ~]# rpm -qa|grep -i lmms
lmms-0.4.10-2.fc13.i686
lmms-vst-0.4.10-2.fc13.i686
I installed lmms today, so could be a newbie problem.
I'm thinking that this dll is reserved for Windows, or something?
I am trying to build "LMMS - Linux MultiMedia Studio" on Slackware Current.
CMake is halting on "printf" lines in various .cpp files. I am assuming it's a conflict with the newer GCC? Does anyone know a work around for this issue?
I've tried commenting out the printf lines but I think they may be needed in the application. Apparently there are lots .cpp using the printf call.
got lmms-0.4.2. slackbuild and after installing all the dependent packages attempted to create the pkg. ./lmms.SlackBuild fails at;
[ 54%] Building CXX object CMakeFiles/lmms.dir/src/core/track.o /usr/bin/c++ -DQT_GUI_LIB -DQT_XML_LIB -DQT_CORE_LIB -O2 -g -fno-exceptions -Wall -ftree-vectorize -O2 -march=i486 -mtune=i686 -fPIC -DPIC -I/usr/lib/qt/include -I/usr/lib/qt/include/QtGui -I/usr/lib/qt/include/QtXml -I/usr/lib/qt/include/QtCore -I/tmp/SBo/lmms-0.4.2/build -I/tmp/SBo/lmms-0.4.2/build/include -I/tmp/SBo/lmms-0.4.2 -I/tmp/SBo/lmms-0.4.2/include -I/usr/include/SDL -
code....
I installed LMMS 0.4.5 on my computer (Ubuntu 9.10), but I'm getting no sound output from the program on ALSA, and whenever I try one of the other options (PulseAudio, OSS, etc.) it reverts to dummy audio. I tried installing JACK to correct the problem, but JACK seems to be giving errors and quitting, and in the past I've always used ALSA for LMMS and it's worked just fine.The problem is local to LMMS, even after a reinstall. My audio output is fine for all other programs I've tested the problem for so far.Also, I just noticed that my instances of LMMS are not being terminated after the windows are being closed...
Notable system info:
Ubuntu 9.10 x86 (kernel 2.6.31-16-generic) installed via Wubi
LMMS 0.4.5 (installed via Ubuntu Software Centre)
3.06 GHz Pentium IV (it looks like dual core)
432 MiB RAM
ATI IXP 584x0 High Definition Audio Controller (according to the lshw command
i'm having a problem with lmms. unlike some posts in the forum, my lmms does output sound, but after a few minutes it crashes. the program itself will just happily go on, but any sound crashes. i hear a glitch, en thereafter no more sound. the only way to fix it is restarting lmms, which is quite a pain in the *** if you have to do that every 5 minutes . the problem occurs to me every time i use lmms, so it is consistent. it seems to me that it crashes faster when i have a bar that includes somekind of chord; a single tone it can handle, but when there's bi- tri- or multiple tones, it just crashes nearly instantly. i've tried both alsa and pulseaudio, and both have the same problems. and it's not my overall sound that's crashing: rhytmbox and videos will just continue to play sound .
View 3 Replies View RelatedI noticed that, when choosing different notes, LMMS not only changes the pitch of the instrument, but also the speed. So, if an instrument makes a sound that lasts about 5 seconds, a really low note can make it last about 10 seconds, and a really high note can last about 1 second. Is there a way to configure how LMMS handles sounds so that it changes their pitch, without changing their speed?
View 2 Replies View RelatedI have madfuload installed and ubuntu (lynx normal not studio) recognizes it.I can even select keyrig under midi devices, but when I press any of the keys nothing is registered. no notes or sounds.I'm using alsa since lmms works better with that then jackmy input/output setting in lmms is alsa-sequencerlsusb:Bus 002 Device 006: ID 0763:019b Midiman KeyRig 49
cat /proc/asound/cards:
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xfebfc000 irq 16
[code]....
How can I upload new sounds and drum tracks to LMMS. I have some in wav. format but I'm having trouble figuring out how to do it.
View 2 Replies View Relatedwhen i try to compile LMMS, I get this error:
CMake Error: Freetype_DIR is not set. It must be set to the directory containing FreetypeConfig.cmake in order to use Freetype.
there is no file on my machine named that or any lowercase/uppercase combinations thereof.
here is the full spit out:
[jayjay@localhost lmms-0.4.5]$ cd build
[jayjay@localhost build]$ make
PROCESSOR: Intel(R) Pentium(R) 4 CPU 3.00GHz
Machine: i586-mandriva-linux-gnu
-- Target host is 32 bit
-- Found Qt-Version 4.3.3
code....
i looked at version 2010 RPM file lists, still no FreeTypeConfig.cmake.
I even built cmake 2.8 from cmake's SF page, it has FindFreetype.cmake, but not FreeTypeConfig.cmake.
What can I do?
I have Ubuntu Jaunty & Linux Multimedia Studio 0.4.2. In attempt to update to LMMS 0.4.5, I downloaded & attempted to install : lmms_0.4.5~ppa-1jaunty_i386.deb and got the following error message : Error : Dependency is not satisfiable : lmms-common (=0.4.5~ppa-1jaunty). What went wrong and is there an easier way to update ? Also, should I remove the older version or just install the latest on top of it ?
View 5 Replies View RelatedIn lmms there is no sound and it says:
No audio-driver working - falling back to dummy-audio-driver
in the command prompt. Sound works everywhere else just not lmms.
I am running openSUSE 11.4 KDE 4.6.5 on my desktop AMD64. Just added R47 repo in order to upgrade KDE 4.6.5 to 4.7. However, after running zypper up I saw lots of packages not being updated.code...
View 4 Replies View RelatedI'm on OpenSuSE 11.1, and since I needed some features of Firefox 3.5.x I manually updated via 1-Click intall to 3.5.8. Now the Updater-Applet signals a security repo update for FF 3.0.18 which is no longer installed since replaced by the 3.5.8, and I see no way to get rid of the red warning sign; this is very bad since now I get no longer informed about other new updates to really installed packages ....
View 9 Replies View RelatedI have been having a recurring issue for a number of weeks now. Everytime Software Update appears it says there are updates so I click update, enter my root password and then I get this error message:
Subprocess failed. Error: RPM failed: error: package postfix-2.6.1-2.1.i586 is not installed Now that package is not mentioned on the list for me to untick so I have no idea where it's coming from. It happens each time and everytime the updates don't get done. They just stay on the list and new ones keep getting added. The list is getting pritty big now
I have down loaded the .rpm for Xiphos (Bible study software) but it won't install. I get the following message; Package/tmp/xiphos-3.1-3.1 x86_84.suse111.rpm could not be installed. Subprocess failed. Error RPM failed:error Failed dependencies and then gives a list as long as my forearm. Oh, and if you need to see the site it's here: Xiphos -- Open Source Bible Study Software -- Home
View 4 Replies View RelatedWhen an installed package name appears red text in YaST, is it because the repository wasn't kept --- as in one-click remove the repository after install?
View 3 Replies View Relatedeverytime I run "zypper up -t patch", I get the following:
Code:
Loading repository data...
Reading installed packages...
Resolving package dependencies...
[code]...
I'm looking to use a vnc client so I can connect to my other windows machine. I thought i'd use realVNC as I've used it before from windows and it seems to do the job... the problem is that when I try and install it I get the following message: Package /temp/vnc-4_1_3-x86_linux.rpm could not be installed.
Details: Subprocess failed. Error RPM failed:error: Failed dependencies: libstdc++-libc6.2-2.so.3 is needed by vnc-4.1.3-1.i386
Is it a problem that I'm trying to install this on a 64 bit Suse 11.1 installation? Can anyone recommend a solution (I can't find the package to install), or any other good vnc clients I can easily use?
I'm trying to install HandBrake on my computer and it always comes back with the following: Error Package /home/Josh/Downloads/HandBrake-0.9.4-Fedora_GUI_x86_64.rpm could not be installed
Details:
Subprocess failed. Error: RPM failed: error: Failed dependencies:
libstdc++.so.6(GLIBCXX_3.4.111)(64-bit) is needed by HandBrake-gui-0.9.4-1.fc12.x86_64
libwebkit-1.0.so.2()(64-bit) is needed by HandBrake-gui-0.9.4-1.fc12.x86_64
rpmlib(FileDigests) <= 4.6.0-1 is needed by HandBrake-gui-0.9.4-1.fc12.x86_64
rpmlib(PayloadlsXz) <= 5.2-1 is needed by HandBrake-gui-0.9.4-1.fc12.x86_64
I'm using openSUSE 11.1 64-bit and as far as I can tell I've installed libstdc and libwebkit. I can't find (FileDigests) and (PayloadlsXz). I've searched around and couldn't find much on this.Don't the above errors mean that I do not have those packages installed, or am I just reading this wrong?