I have openSUSE 11.1 on a ppc machine.I have enabled all the repos, adding to it the packman repo and the GNOME community and GNOME stable repos.I see most of the dependencies there, but a few aren't there. Specifically, ladspa-foo-plugins is keeping me from installing it right now. Does anyone know of a repo that supplies all the dependencies for lmms?
View 2 RepliesI have installed the lmms-vst package (converted from a deb package) but I still not see the VeSTige Instrument in the Instrument plugins list. I really want to use VST plugins.
View 1 Replies View RelatedI have been trying to install lmms on my Slackware 12.1 system.I have installed QT, cmake in order to compile the source.
It seemed to install correctly (after a bit of reading about how cmake works....) but gives me this on run:
Quote:
bash-3.1$ lmms
Notice: could not set realtime priority.lmms: symbol lookup error: lmms: undefined symbol: _ZN8QPainter10drawPixmapERK7QPointFRK7QPixmap
bash-3.1$
So my understanding is that it is missing a file or command associated with the program, through it not being linked or not existing. Is there any way I can find out where it thinks this file/data should be, so as to ascertain what libs/packages have it? As far as I can tell, I have all dependencies satisfied.....
I installed it yesterday and was disappointed that no sound played
View 3 Replies View RelatedI have A dell vostro v13. I am have installed LMMS which runs ok if I put minimal demands on it but if I start putting to many demands on it like running More then three Zynaddsubfx plugins or multiple sample players the cpu moniter goes into the red and it starts to sound bad and slow down a great deal. I know a small laptop is probably not the best choice to run a DAW on unless it has a good processor but this is the only computer I currently have and I really like LMMS. Is there any way I can get more performance out of my computer? I looked a little into overclocking but dell Bios Does not allow for this. Is there any tricks that I can do to get LMMS to perform better given the limitations of my system?
View 5 Replies View RelatedI installed LMMS 0.4.5 on my computer (Ubuntu 9.10), but I'm getting no sound output from the program on ALSA, and whenever I try one of the other options (PulseAudio, OSS, etc.) it reverts to dummy audio. I tried installing JACK to correct the problem, but JACK seems to be giving errors and quitting, and in the past I've always used ALSA for LMMS and it's worked just fine.The problem is local to LMMS, even after a reinstall. My audio output is fine for all other programs I've tested the problem for so far.Also, I just noticed that my instances of LMMS are not being terminated after the windows are being closed...
Notable system info:
Ubuntu 9.10 x86 (kernel 2.6.31-16-generic) installed via Wubi
LMMS 0.4.5 (installed via Ubuntu Software Centre)
3.06 GHz Pentium IV (it looks like dual core)
432 MiB RAM
ATI IXP 584x0 High Definition Audio Controller (according to the lshw command
i'm having a problem with lmms. unlike some posts in the forum, my lmms does output sound, but after a few minutes it crashes. the program itself will just happily go on, but any sound crashes. i hear a glitch, en thereafter no more sound. the only way to fix it is restarting lmms, which is quite a pain in the *** if you have to do that every 5 minutes . the problem occurs to me every time i use lmms, so it is consistent. it seems to me that it crashes faster when i have a bar that includes somekind of chord; a single tone it can handle, but when there's bi- tri- or multiple tones, it just crashes nearly instantly. i've tried both alsa and pulseaudio, and both have the same problems. and it's not my overall sound that's crashing: rhytmbox and videos will just continue to play sound .
View 3 Replies View RelatedI noticed that, when choosing different notes, LMMS not only changes the pitch of the instrument, but also the speed. So, if an instrument makes a sound that lasts about 5 seconds, a really low note can make it last about 10 seconds, and a really high note can last about 1 second. Is there a way to configure how LMMS handles sounds so that it changes their pitch, without changing their speed?
View 2 Replies View RelatedI have madfuload installed and ubuntu (lynx normal not studio) recognizes it.I can even select keyrig under midi devices, but when I press any of the keys nothing is registered. no notes or sounds.I'm using alsa since lmms works better with that then jackmy input/output setting in lmms is alsa-sequencerlsusb:Bus 002 Device 006: ID 0763:019b Midiman KeyRig 49
cat /proc/asound/cards:
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xfebfc000 irq 16
[code]....
Full Wine is installed, so VST should work. All VST plugins cause LMMS to hang. However, the dials and such on the plugins are responsive, so I think its a problem with LMMS. For that matter VST works perfectly under Reaper, which is a platinum rated Windows program running under Wine.
View 4 Replies View Relatedi can't install multimedia codec, after installing i restart PC and then linux writes error kde4int i hadn't this error before, it begins after installing new monitor Samsung syncmaster B1940
View 9 Replies View RelatedHow to install Multimedia Codecs on Opensuse 11.2 with KDE?
View 2 Replies View RelatedUntil yesterday I was living the Linux dream. I had my computer working like a charm but I wanted more and I installed Virtualbox. It asked for some drivers and the kernel source for compiling them. After a reboot VB was working ok but sound was gone.
I've done some tests for solving the problem with no luck:
1. reinstalled all ALSA packages
2. reinstalled all pulseaudio packages
3. reisntalled all phonon packages
4. regenerated /etc/alsa-conf
5. rechecked all sound settings under YAST (volume), everything looks good but there is no sound
6. rechecked all sound settings under System preferences > Multimedia > phonon (gstreamer and xine are installed, gstreamer is the default engine)
7. executed /usr/sbin/alsa-info.sh [url]
8. tried $speaker-test -Dplug:front -c2 -l5 -twav and other commands from SDB:Audio troubleshooting - openSUSE with this output
Code:
Has anyone had any success with installing the HVR-950Q TV Tuner card? I am trying it after giving up on the hvr-1500c (15 months trying!).
View 9 Replies View RelatedI just wanted to install Kdenlive and I added the requested repositories. The one called "packman" included unsigned files that were labelled "untrusted" by the installer. Is it still safe to install it? What's your opinion?
View 1 Replies View RelatedI'd like to install a Logitech webcam with built-in microphone in order to use it in Skype.
It seems to been recognized :
And softs links seems to be created :
Code:
I can't understand the last line... I also got trouble with Adobe Flsah Square flash 64 bits and it may be related to it.
I do not know where looking for. Here are the output of Webkam and Wxcam.
How to install Adobe Flash on my netbook. I recently installed openSUSE 11.4 which I am guessing is the newest one. I also am using Mozilla Firefox 4.0 Beta 12. I can't seem to install it at all. First I downloaded the YUM file and tried installing it with some weird program that came with openSUSE and it is just too difficult. I definitely do not know how to use it. Then I read I should be installing the tar.gz file and so I did. Even then people have different ways of installing it. The easiest way I have seen has been the way Adobe's website tells how to install it.
Installation instructions for tar.gz
1. Click the download link to begin installation. A dialog box will appear asking you where to save the file.
2. Save the .tar.gz file to your desktop and wait for the file to download completely.
3. Unpackage the file.
4. Copy the libflashplayer.so file to the plugins folder of your browser. Refer to your browser vendor for the location of this folder.
5. To verify the plug-in is installed in your Mozilla browser, launch Mozilla and choose Help > About Plug-ins from the browser menu.
Now my problem is that when it tells me to copy "Copy the libflashplayer.so file to the plugins folder of your browser" I cannot find the "plugins" folder in my mozilla/firefox folder. Now I'm actually wondering if it's because it a Beta version of Mozilla Firefox. I'm not very good with "coding" and "commands".
I wanna install video player on my OpenSuse 11.3 with KDE as Desktop Manager. But as we know, there are so many video player in Linux. So, I want to know which video player is better, Mplayer or VLC?? which one has better codec?? or is there a better video player other than these?
View 9 Replies View RelatedSuccessfully installed MRICRO a dicom image viewer.However failed installing pacsone PACS server. Other apps like aeskulap, etc which are available in tar.gz format do need help in installing.
View 1 Replies View RelatedI am new to Linux, how to install codecs, as when I am trying to install I am finding this error. An error occurred while initializing the software repository.
Details: Url scheme is a required component and sometime like repository can be loaded.
In Gnome and XFCE I always have a choppy music playback. The music is never played smoothly. There is always hesitations in the playback, as if the CPU is running on 100% and cannot cope with the system load.
One of the reasons for that is (in my case) Pulseaudio.
Another reason is Gstreamer. When I choose Gstreamer as backend in KDE, I get the same choppy musicplayback as in Gnome or XFCE. With Xine as backend in KDE, everything is fine. So my conclusion is: with Xine, the sound would be fine in Gnome too.
So, I wonder if it is possible to use Xine as backend in Gnome too. Does anyone have experience with running Xine in Gnome and/or XFCE? What do I need to do to set Gnome/XFCE, so that it uses Xine instead of Gstreamer?
Or is there maybe a special setting, I have to apply? In gstreamer-properties I have tried all possible settings, but this didnīt change anything to the quality of sound.
My experience is also: this choppy sound is hardware-independend. It doesnīt matter which hardware I use, the sound is choppy. It is also distro-independend. The sound is choppy in openSUSE (gnome and in KDE with applied Gstreamer backend), in Ubuntu, Xubuntu, Fedora with Gnome, Linux Mint with Gnome.
I did installed LMMS [URL] in Ubuntu 10.10, but it did installed the 0.4.5 version which is not very stable, I wanted to install the latest 0.4.9 (which in the Windows version is much better than the 0.4.5).
View 4 Replies View RelatedHow can I turn the metronome off in lmms? It seems like it should be a simple thing to do, but I don't see how.
View 2 Replies View RelatedI did see another topic on this forum regarding VSTs in LMMS, but it didn't solve my problem. I am running using the 64-bit testing branch of debian, which may be causing some of my problems. I tried compiling LMMS myself, but I ran into an issue with wine when it tried to compile RemoteVstPlugin.
It seems as though wine didn't install winegcc or any other tools like that. After a while, I did manage to find winegcc and some of the other tools in /usr/lib/x86_64-linux-gnu/wine/bin. I decided to add some symlinks in /usr/local/bin to point to winegcc, wineg++, winecpp, and winebuild. After that, it seemed to give a different error message, but still failed to compile. It now gives me the following error:
Code: Select all[ 83%] Generating RemoteVstPlugin
/usr/bin/ld: Relocatable linking with relocations from format elf64-x86-64 (/usr/lib/x86_64-linux-gnu/wine/wine/libwinecrt0.a(exe_entry.o)) to format elf32-i386 (RemoteVstPlugin.Azfbf1.o) is not supported
winebuild: /usr/bin/ld failed with status 1
[Code] ....
I may be missing some dependencies because I couldn't run build-dep without removing skype but I don't think that's the problem. I thought the above problem may have something to do with wine, so I was going to try compiling wine to. I ran into problems with that, and ditched that idea. I really don't know what to do anymore. I can't just disable VST support, because that's why I tried to compile LMMS by myself to begin with!
Whenever i close LMMS, it's still running in the background until i kill the process. How can i get it to exit normally?
View 2 Replies View Relatedwhy dont lmms work on ubuntu karmic 9.10?
View 2 Replies View RelatedI'm not able to use lmms with vst plugin.
Here is what I did:
I downloaded url.unzipped it into /home/georges/vst-plugin/ because this is my vst plugin directory then went to instrument plugins,dragged vestige into song-editor clicked on Default preset clicked on Open other VST-plugin selected 4Front Piano.dll
clicked ok, and I get this error popup:
Quote:
The VST-plugin /home/georges/vst-plugin/4Front Piano.dll could not be loaded for some reason.If it runs with other VST-software under Linux, please contact an LMMS-developer!
I'm running lmms 0.4.10 on a Fedora 13 laptop.
Code:
[root@t61 ~]# rpm -qa|grep -i lmms
lmms-0.4.10-2.fc13.i686
lmms-vst-0.4.10-2.fc13.i686
I installed lmms today, so could be a newbie problem.
I'm thinking that this dll is reserved for Windows, or something?
I am trying to build "LMMS - Linux MultiMedia Studio" on Slackware Current.
CMake is halting on "printf" lines in various .cpp files. I am assuming it's a conflict with the newer GCC? Does anyone know a work around for this issue?
I've tried commenting out the printf lines but I think they may be needed in the application. Apparently there are lots .cpp using the printf call.
got lmms-0.4.2. slackbuild and after installing all the dependent packages attempted to create the pkg. ./lmms.SlackBuild fails at;
[ 54%] Building CXX object CMakeFiles/lmms.dir/src/core/track.o /usr/bin/c++ -DQT_GUI_LIB -DQT_XML_LIB -DQT_CORE_LIB -O2 -g -fno-exceptions -Wall -ftree-vectorize -O2 -march=i486 -mtune=i686 -fPIC -DPIC -I/usr/lib/qt/include -I/usr/lib/qt/include/QtGui -I/usr/lib/qt/include/QtXml -I/usr/lib/qt/include/QtCore -I/tmp/SBo/lmms-0.4.2/build -I/tmp/SBo/lmms-0.4.2/build/include -I/tmp/SBo/lmms-0.4.2 -I/tmp/SBo/lmms-0.4.2/include -I/usr/include/SDL -
code....
How can I upload new sounds and drum tracks to LMMS. I have some in wav. format but I'm having trouble figuring out how to do it.
View 2 Replies View Related