Ubuntu :: Getting Error With Burning Data DVD+R - Why Is So / Solve This?
Jan 12, 2011
I don't know what the difference is between DVD+R and DVD-R or if it matters, lol.
I was trying to burn 2.0 GB of data to a 4.7-GB DVD+R and after it finished burning, I got "There was an error writing to the disk."
When I opened the directory of the disk, it appeared that all of the files were there, but when I tried to open any of them, I got "Could not read from the resource" errors.
I tried burning it again to a fresh disk and it was the same except when I tried to open the files it said variations of "error interpreting file".
I checked the log files and mostly it was unhelpfully generic errors, except for this line:
"BraseroLibburn Asynchronous SCSI error on CLOSE TRACK SESSION: [3 73 04] Program memory area update failure"
That part was the same for both attempts. What could be causing this?
I'm having trouble burning a data disk. When I burn it ejects the DVD, then saves a log. Here's the last few lines of its contents:
BraseroGenisoimage stderr: /usr/bin/genisoimage: Warning: Directory loop (/home/robert/Desktop/Mount_Directory/var/at/spool dev: 700 ino: 13323). BraseroGenisoimage stderr: /usr/bin/genisoimage: Warning: Directory loop (/home/robert/Desktop/Mount_Directory/var/spool/postfix dev: 700 ino: 13200). BraseroGenisoimage stderr: /usr/bin/genisoimage: Warning: Directory loop (/home/robert/Desktop/Mount_Directory/var/spool/postfix/pid dev: 700 ino: 13210). BraseroGenisoimage stderr: /usr/bin/genisoimage: Warning: Directory loop (/home/robert/Desktop/Mount_Directory/var/spool/samba dev: 700 ino: 13247). BraseroGenisoimage stderr: /usr/bin/genisoimage: No such file or directory. Non-existent or inaccessible: /home/robert/Desktop/Mount_Directory/Read Before You Install.app/Contents/Resources/ko.lproj/설치 전에 읽어보기.pdf BraseroGenisoimage stderr: /usr/bin/genisoimage: Warning: Directory loop (/home/robert/Desktop/Mount_Directory/var/cron/tabs dev: 700 ino: 12670). BraseroGenisoimage stderr: /usr/bin/genisoimage: Error: '/home/robert/Desktop/Mount_Directory/private/var/log/wtmp' and '/home/robert/Desktop/Mount_Directory/var/log/wtmp' have the same Rock Ridge name 'wtmp'. BraseroGenisoimage stderr: Unable to sort directory var/log BraseroGenisoimage called brasero_job_error BraseroGenisoimage finished with an error BraseroGenisoimage asked to stop because of an error error= 16 message= "An image could not be created" BraseroGenisoimage stopping BraseroGenisoimage got killed Session error : An image could not be created (brasero_burn_record brasero-burn.c:2839)
Quite a bit of stuff. You can download its full contents. I have no idea what this means and I really would like to make this disk.
K3B burning data and ISO files. Disc Media:Datawrite DVD & CD Discs
Old Box OS: WinXP Pro SP3 32bit Burning Software:Nero 7.0.1.4 Mobo:Asrock P4V88+ Processor:AMD AthlonXP 2800+ Single Core CPU Memory:2GB DDR Optical Drive:NEC DVD RW ND-4550A (2x, 4x & 8x write speeds) [Code].....
My Current / Old box (WinXP)can burn 2.9GB of data over a LAN from a mapped drive using Nero in 7 minutes and maintain file & directory names as they are complete with upper and lower characters, spaces between words and special characters without shortening file / directory names out of the box. My new box (SuSE 11.2) was initially incapable of burning anything, ?Access Denied? I added the user to the cdrom group this allowed the burning of data but the process changed file and directory names. It changed all letters to capitols, replaced blank spaces and special characters with underscores. I still can?t burn ISO files, ?Access Denied?. The time it took to burn the 2.9GB of data on the hard drive of the SuSE install was sort of acceptable but a full 5 to 6 minutes longer and I was forced to shorten file names too.
I changed a setting to allow the full ascii character set hoping this would preserve file and directory names as they are during the burn process. I changed a setting to allow long file names too. I now have another problem, on starting the burn process and after a minute'sh K3B displayed the fact that it was going to take over 1 ? hours to finish! Yikes. After an hour it was going to take a further 2hrs and 10mins. This didn't include read varify. I aborted the burn process, this can?t be correct. I placed the LG drive in my old box, burn process took a second or two less than 7mins to complete using the same data over the same LAN. I've tested the drive for hardware errors, the drive is perfect. Am i missing something, failing to do something or doing things wrong. Is the optical drive or some other component incompatible in some way.
I'll be burning many gigabytes of data on a daily basis and i'm hoping to be able to burn a full DVD disc of mixed data types in less than 10mins whilst preserving the full ascii character set, file & directory names inc special characters and blank spaces. I still need to resolve my "access denied" problem when trying to burn ISO files too.
I know it might sound silly but is there any special Windows compatibility mode when burning a data DVD (containing photos) on linux? It's not the first time that I've burned some photos on a DVD and my Windows friends can't open them. Either the dvd doesn't open at all or it shows that the DVD is full but doesn't display any files whatsoever. When I try the DVD back in Linux (both my desktop and laptop) everything is fine. I've got a relatively new burner and my friends don't have old ones either. I usually use xfburn (sometimes k3b) Is it me doing something wrong? I didn't burn it at the slowest speed, but it wasn't the maximum speed either.
I want to have brasero or k3b do a data check after burning a backup cd. I know that in Nero for Windows you just click on the box that says "verify after burning". For brasero I see that you need an md5 file but it will be to tedious to use an md5 utility to make a checksum for every file and then put in in a txt.
I recently did a clean install of Ubuntu 10.04 and tried using a DLink DWL-G122 dongle for a wireless connection.
It seems to connect to the wireless router, but I cannot seem to access any websites using the wireless connection. Ethernet connections to the computer work perfectly, but ethernet isn't ideal.
I keep getting the following error when trying to burn a DVD, and unfortunately am none the wiser as to what it means:
Code:
DBus error
This is using both Brasero and K3b, the disk stops writing about halfway through on Brasero and a tenth of the way through on K3b. I'm just trying to burn a data DVD and have tried low & high speeds.
I see there are a lot of other threads on this subject, but I don't find any solution in the other threads. I have been trying to burn cd's directly in Ubuntu, using Brasero, which was already installed. Why does it not work? It says that an "unknown error occurred" or something like that. I don't remember the exact error message right now. I am now burning cd's in "Gnomebaker" which I found in the applications list. This works fine, but only at the speed of 4x, no faster. I hope to get the brasero application to work, as this is the easiest, fastest way, just dragging files to the cd.
I am trying to burn Ubuntu Server to a CD-R and I am getting a quick error after each burn attempt. I am burning on the slowest speed. I want to resolve this without using up all of my CD's. When I try to burn the ISO it shows 39.5 MB of free space on the disc when this is a brand new CD-R with 700 MB of free space. When I look at the newly burned disc it looks like Ubuntu Server is on the CD
I was trying to burn a dvd to an image file today, and the first one worked no problem, I tried to burn another and I keep getting this error: Data could not be written (Input/output error) Here's my log:
I'm running Karmic and finally decided to upgrade. When I inserted my blank disc for 11.04 Brasero shows my blank disc as "Blank CD --drive name here -- 17.5 MB free space". I proceed to burn anyway figuring that it's some kind of read error and I have nothing to lose by attempting the write. (I did in fact lose 3 discs, about 50 cents). Disc writes fine but hangs for about 5 minutes during the finalizing stage and then stops with an error.
I'm trying to burn an audio CD with Brasero. Every time I try this, it fails, but it works when writing to an image file. Brasero quits with the following messages in log:
Code: Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1744) Unsupported type of task operation Session error : An internal error occurred (brasero_burn_record brasero-burn.c:2862) Do you know what could be causing this?
I have downloaded Ubuntu from a CD and burned it using Infrarecorder. When I tried to boot my netbook(Samsung N 140 with Win XP OS preloaded), it gives error message .i have tried the process several times and spent lot of time but to no avail.
Does anyone experience burning problem with Brasero? At first, everything was great, but lately I receive all kind of messages (mounting problem, ejecting problem etc.) and burning is unsuccessful.
I've downloaded the DVD version of Fedora 12 with a torrent so it shouldn't be corruped - checked the hash anyway and it wasn't - and I burnt it at a low speed and has my burning program verify that it did indeed burn what it was supposed to. I tested the disc for errors and every time it shows up that around the 70% mark that the DVD has an error.
Iam trying to burn wave files to a cd that i ripped from a cd when i try burning to gets to 300 meg and stops with these errors CD RECORD RETURNED AN UNKNOWN ERROR (CODE 254) SOMETIMES USING TAO WRITING MODE SOLVES THIS ISSUE Using ubuntu 10.04
I have 2 hard drives on mu box 1st one is 500.0 MB ext4 Volume where I have my syste FC 13 and a 2nd one where I put my database files as follows 78.1 GB ext4 Volume usage = filesystem, format ext4
ih file browser, I can see an icon for a 80GB hard drive but whenever I double click I get the following
Quote:
Error mounting volume: An error occured while performing an operation on data Partition 1 of ATA Maxtor <: <the operation failed
clicking details
Quote:
Error mounting: mount exited with exit code 1: helper failed with: mount: wrong fs type, bad option, bad superblock on /dev/sda1, missing codepage or helper program, or other error
when I type
Quote:
dmesg | tail
I get
Quote:
# dmesg | tail [drm] nouveau 0000:01:00.0: Allocating FIFO number 3 [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 3 [drm] nouveau 0000:01:00.0: Allocating FIFO number 4
What is very strange is that mysql works fine.In disk utility, it indicates that disk is healthy, but when I click check file system i get
File system check on "data" (Partition 1 of ATA MAXTOR STM380215A) completed File system is NOT clean
My laptop has a DVD/RW (It is both dash "-" and plus "+" able...whatever that really means.) drive. When I want to burn media,I grab a fresh disk from my bulk supplies and load it to the drive.Trouble #1 -- Software fails to recognize the fresh media as blank.I start the burn processing ... chug chug chug ... and something goes wrong.
Trouble #2 -- Software has some trouble writing the fresh media. I grab another fresh disk and repeat, often 2 or 3 times, before I get a successful burn. Can someone tell me why I have so much trouble with getting a media burn without all of the retry activities? How do I discover exactly what is going wrong? I don't find logs or similar that explain the troubles. I use both K3B (my fave) and Brasero.
I have a problem with the GRUB menu. When i open my computer it gives me error message " Minimal BASH-like line editing is supported.".I can't get passed that. So, it makes the computer unuseful. Windows 7 is not seen, neither Ubuntu. I am stuck at that screen. Before i was running dual-boot Windows 7 32-bit and Ubuntu 10.10.The GRUB version is GNU GRUB version 1.98+20100804-5ubuntu3I looked everywhere to get this fixed but i just cant seem to fix it!
