Ubuntu :: Kernal Modesetting Driver In Use Refusing To Load - No Devices Detected

Nov 22, 2010

I dl the windows installer one and ran it. As it started it went to the Ubuntu logo and then my screen became half full of different colored horizontal lines, so I rebooted and went into the adv boot and ran the install under safe graphics mode. Now when I boot I get options to boot into 2.6.32-25 and also a recovery and also 2.6.32.24 and a recovery. I left the 2.6.32-25 highlighted and it booted but gave me a msg that said:

(EE) VESA: Kernal modesetting driver in use, refusing to load.
(EE) No devices detected.

Then it goes to a screen that allows me to boot in a low graphics mode. It loads and I dl some security updates with the Update Manager. What do I need to do in order to boot w/o any faults and also what is the difference from 2.6.32-25 and 2.6.32-24? Which should I be using? Do I need to modify my graphis somehow?

View 3 Replies


ADVERTISEMENT

Fedora Hardware :: No Kernel Modesetting Driver Detected

Nov 13, 2010

Attached is my Xorg.0.log, my modprobe output, and my lspci -v output.Kernel modesetting appears to be enabled. Plymouth splash screen works graphically.

View 1 Replies View Related

OpenSUSE Hardware :: No Kernel Modesetting Driver Detected

May 4, 2010

I use OpenSuse 11.1. My graphic card is an intel Q43/Q45 chip. I was instructed to update my xorg and mesa packages in order to make on application work (it was crashing my x server). After I did so, x wouldn't start:

intel(0): No kernel modesetting driver detected
Screen(s) found, but none having a usable configuration

Now I am stuck with vesa if I want to have x running at all. I tried reverting to the versions of mesa and xorg I had before, when everything worked, but to no avail.

What can I do? (I am by no means an expert and that I don't know linux very well, and even less openSuse... just has to use it at work....)

View 9 Replies View Related

Slackware :: No Screens & Intel / No Kernel Modesetting Driver Detected

Apr 7, 2010

I can't seem to get a screen on my Asus Netbook 1005pe. I did install the xf86-video-intel-2.10.0-i486-1.txz & kubdrn-2.4.17-i486-1.txz.I'm also having a Kernel Modesetting issue. Below is my Xorg.conf file & my Xorg.0.log file. Sorry if I am not explaining myself correctly.

View 14 Replies View Related

Debian :: Cannot Get Kernal Module To Load The Driver For My NIC

Aug 17, 2010

I am installed Debian 5.0.5 with kernel 2.6.x.

I do a lspci and get: Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller

Kernel modules: e1000e

I know under this im supposed to see: Kernel driver in use: e1000e <- but this doesn't exist.

So, under lsmod I see e1000e loaded:

View 9 Replies View Related

Ubuntu :: Imgburn - No Devices Detected - Can't Get It To Recognize Driver?

Apr 23, 2011

I have installed Imgburn and it wont detect my cd drive, I configured wine and everything and no matter what I can't get it to recognize my driver, what am I to do?

View 9 Replies View Related

Ubuntu Multimedia :: Install The Latest RealTek Driver - No Sound Devices Detected

Jan 15, 2011

I tried to install the latest RealTek driver for Linux and it has wiped all my devices. I've tried reinstalling the alsa-base packages but it hasn't worked

View 4 Replies View Related

General :: 2D Modesetting With Radeon Driver Eliminate DRI?

Mar 29, 2010

I have Radeon HD 3870, which is limited to 2D purposes I understand...

Will this mean that I cannot use DRI? Will it have a performance impact in 2D applications?

Does DRI make watching movies on PC 'better'? Especially 720p ones.

View 3 Replies View Related

General :: Find Out Kernal Version And Kernal Configuration File Location

Aug 24, 2010

I am using redhat linux enterprise linux 5, how to find out the linux kernal version and kernal configuration file location .

View 2 Replies View Related

Fedora :: Process To Install Broadcom Driver In Kernal 3.0.4?

Sep 8, 2011

i just compiled my kernal now uname -r says>3.0.4 i m using fed 15 WIFI IS NOT WORKING is the issue wats the process to install broadcom driver in kernal 3.0.4 lspci | grep BC 03:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)

View 1 Replies View Related

Ubuntu Installation :: No USB Devices Detected / What To Do?

Mar 4, 2010

I am just getting started with Ubuntu and love it so far. It has breathed new life into an old Compaq Presario V2000 and once I get up to speed on it I hope to start running it on all the rest of our machines.

The only major problem I am having is that none of the USB devices I have plugged in are being detected. From what I have seen online I should be getting a notification and should be able to view the devices at Places/Computer but so far, nothing. Googling this problem it appears that individual devices often don't work but I could not find anything on all USB devices not working.

Any ideas as to what I am doing wrong here?

View 1 Replies View Related

Ubuntu :: ATI Graphics Drivers - EE No Devices Detected

Sep 23, 2010

After I installed my ati grapics driver (the ati driver from the ati website) my ubuntu has this weird problem. When loading there is a line that cought my attention:
Running DKMS auto installation service for kernel 2.6.34: fglrx (8.543)...Failed

I think that has something todo with the other error I get which is:
Primary device is not PCI
(EE No devices detected)
Fatal server error
no screens found
giving up.
I have an ATI 5650 Radeon mobile grapics card By the way.

View 9 Replies View Related

Ubuntu :: USB-storage Devices Not Detected After 9x / 10X Upgrade

Jan 2, 2011

My USB devices are being detected when I run the 'lsusb' command.However there is no driver that is set to the device.Also the /dev/sdX device is created so there is a mount point

View 1 Replies View Related

Ubuntu :: Error Encountered - (EE) No Devices Detected

Jan 8, 2011

I recently had a hard drive on a computer (not to be obvious), and I fried the computer. You may ask "well why did you do that?" well, simply because I had accidentally bumped and switched to 220 volts, rather than keeping it at 115 like a sane individual. Anyway, I got a new computer, swapped the hard drive. When I go to boot into ubuntu though, it gives me the following error:

Code:
Ubuntu is running in low-graphics mode
The following error was encountered. You may need to update your configuration to solve this.
(EE) No devices detected.

I also have XP on this hard drive, and it works almost better than it did on my old one, surprisingly. all i have to do now for it to be labeled as efficient, is to get some RAM. But anyway, what can I do about the error message? I tried booting into recovery, running dpkg from the list of options, and it did a couple of things.

View 3 Replies View Related

Hardware :: Usb Devices Not Detected Ubuntu Lxde

May 18, 2010

Whenever I plug in my usb flash drive or my memory card adapter they are not detected. If you can help me I will provide any kind of information needed to solve the problem, just tell me what command to run. Also my cd/dvd drive is still not being detected or is mislabeled on ubuntu 10.04 lucid lynx.

View 3 Replies View Related

Fedora Installation :: 12 USB Devices Not Detected

May 8, 2010

Recently I installed Fedora 12 without any hassles except that the USB devices are not getting detected. I checked with /proc/interrupts and the ehci_hcd module doesn't get any interrupts. Here is my dmesg (done to show only USB related messages) :

Code:

usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb

[code]....

View 1 Replies View Related

Software :: USB Devices Not Detected In 64 Bit MEPIS 11 OS

Jul 17, 2011

Last week, I received a used, older (built ~ 2005 or so) IBM ThinkCentre desktop (machine 8143-2EU) having a Pentium 4 (64 bit), 3.0 GHz CPU. It came with WinXP- 64 bit as the sole OS. When I tested my USB devices with the WinXP OS, they were detected and read. I wiped the WinXP and installed MEPIS 11- 64 bit. [There's only a single Intel Pentium 4, 64 bit CPU known to work for MEPIS 11- 64 bit. It's the Pentium 4 Prescott with EM64T. I don't know if my P4 is that one.] Things seem OK with my MEPIS 11- 64 bit OS except for the times when I plug in USB devices--> they're not detected nor read. In a MEPIS forum, a guy told me to try, after first plugging in the USB devices, running lsusb in Konsole. I do that, the system wakes up, and the USB devices are detected and read. But why do I have to do this to get my system to detect and read the devices? I've made the MEPIS system setting so that all USB devices are automounted when plugged in. Doing that did not correct this problem. As root, in Konsole, I ran hwinfo and noticed that for the USB controllers, the driver - uhci_hcd - is not active. Here's the hwinfo output for one of the USB controllers:

18: PCI 1d.2: 0c03 USB Controller (UHCI)
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_8086_265a

[code]...

[I suppose or guess that all MEPIS users who don't have this USB-device-detection-and-read problem have uhci_hcd.] To see what would happen as a test, I also used a MEPIS 11- 32 bit Live DVD in this computer having the MEPIS 11- 64 bit OS. When I use the Live DVD, I have the same USB detection-and-read problem! What does that mean? With some USB devices plugged in while I'm using the Live DVD, I'm forced again to run lsusb in Konsole. This wakes up the system so that it detects and reads plugged-in USP devices. Why? Any idea on how to fix this? Does this problem seem more a software one rather than a hardware one?

View 2 Replies View Related

Ubuntu Multimedia :: Why Are Devices Detected Even When Disabled In BIOS

Dec 5, 2010

I am having problems understanding how sound capable devices are being used on my Ubuntu10.10 64 bit system. I have an ASUS A8V motherboard with on-board multimedia functions provided through the VIA V8237 chip. BIOS gives me the option to disable this functionality and I have set BIOS this way. I want to use an M-Audio 24/96 card for all sound processing.

However, in applications like Audacity the VIA chip functions are all available and can be set as recording and playback devices. The same is true in ALSA.

Why does 'linux' (I have no idea which part of the OS) ignore the BIOS settings?

Furthermore alsamixer always selects the 'default' devices. Where and how are these set?

<System><Preferences><Sound> hardware tab list 2 'Internal Audio' devices but no M-Audio device. What are these devices? Only 1 of them appears to create any output with the 'Test Speakers' tab. This confuses me completely because the speakers are connected only to the M-Audio card.

None of the profiles for 'Settings for the selected device' match the capabilities of the M-Audio card (1 set of stereo inputs and 1 set of stereo outputs). So where are these profiles coming from? Which do I select for the M-Audio card?

What do the Input and Output tabs in <System><Preferences><Sound> mean? Are these different to the hardware tab? The 'Output' tab lists2 devices for sound output: 'Internal Audio Analog Stereo, Stereo' twice. What devices are these ?

View 6 Replies View Related

Ubuntu Multimedia :: NVIDIA Drivers: No Devices Detected

Jun 6, 2011

I'm having issues getting the nvidia-current drivers working with a GeForce 8400 graphics card on Ubuntu 10.10 (x64). After running nvidia-xconfig and restarting, X fails to start with an error: No devices detected.

Here is my xorg.conf:

Code:

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 260.19.06 (buildmeister@builder101) Mon Sep 13 04:59:45 PDT 2010
Section "ServerLayout"

[code]....

View 3 Replies View Related

CentOS 5 Hardware :: /dev/sda (SATA) Devices Detected As /dev/hda?

May 15, 2009

I have an issue with Hard Drives in GNU/Linux CentOS 5.3I installed linux 5.3 frash copy to new SATA MAXTOR 1000GB Hdd.And see the partitions is SATA MAXTOR 1000GB (NEW INSTALLATION CentOS 5.3)

/dev/sda1 Boot
/dev/sda3 /
(/dev/sda2 is the SWAP)

[code].....

View 5 Replies View Related

Ubuntu Multimedia :: KDE Detected That One Or More Internal Sound Devices Were Removed

Jan 22, 2011

Rhythmbox plays some music (not all of it) and it sounds crappy. And when I start Amarok I get this: KDE detected that one or more internal sound devices were removed. Do you want KDE to permanently forget about these devices? This is the list of devices KDE thinks can be removed: Output: HDA Intel (INTEL HDMI) Output: HDA Intel, INTEL HDMI (HDMI Audio Output)What to do?

View 4 Replies View Related

Fedora :: Load A Print Driver And Network Driver For An MX860 Printer?

Apr 15, 2010

This is my first attempt with Yum and Fedora for that matter. I need to load a print driver and network driver for an MX860 printer. I downloaded the drivers and they are in the download folder. When I try to install I get what is below. How do I resolve? Do I need to identify where the driver is? If so, how?

[compaq@compaq ~]$ su -c'yum install cnijfilter-mx860series-3.10-1-i386-rpm.tar.gz'
Password:
Loaded plugins: refresh-packagekit
updates/metalink | 15 kB 00:00
Setting up Install Process
No package cnijfilter-mx860series-3.10-1-i386-rpm.tar.gz available.
Nothing to do
[compaq@compaq ~]$

View 14 Replies View Related

Ubuntu :: Open It And It Says "No Devices Detected"

Oct 5, 2010

I installed Imgburn yesterday and it worked fine.Today i open it and it says "No devices detected" which doesn't let me copy anything.

View 4 Replies View Related

OpenSUSE Install :: "No Bootable Devices Detected"?

Aug 21, 2011

Before I changed to linux, I was on Windows 7. My computer already had 4 different partitions, and would not let me create more. And so, I had to delete one of the partitions. I chose to get rid of the "recovery" partition. I used "Macrium Reflect" to burn a bootable CD of my recovery stuff. Anyways, fast forward to this morning. I got tired of the KDE desktop, and I decided to switch to Gnome. So, I went into windows 7, deleted the three OpenSUSE partitions, and moved the remaining space back to my C: (windows) drive. (don't ask me why :S)

Anyways, so I take a look, after it's done deleting/moving stuff, and I'm told that "no bootable devices detected".. This made me angry, as I am certain I didn't delete any of the windows partitions. So, I thought, I'll just use my recovery disk, because I quite literally, have no personal data on my computer to lose.Except, my recovery disk is not actually bootable. So, then, after screaming in rage, I booted up OpenSUSE from my KDE CD, and was gonna take a look at things in YaST. Except, YaST will not actually open.

View 9 Replies View Related

OpenSUSE Wireless :: New Driver (r8712u) For RTL8192 USB Devices

Aug 30, 2010

I have finally gotten permission from Realtek to submit the new driver to the staging directory of the mainline kernel. This also means that I can allow users to download from the git source repository so that they can build their own versions. If you are interested in doing this, you will need to install some packages. To get the ones you need

[Code]....

View 9 Replies View Related

Ubuntu Networking :: Wireless Driver Has Not Detected

Jul 17, 2010

im on compaq presario cq40 (amd64 turion x2) and recently install ubuntu.10.04 using wubi with dual os.. im installed wireless braodcom BCM4312 802.11b/g LP-PHY 'bcm43xx-fwcutter_006-3_amd64.deb' driver for my laptop and restart my machine.. when i go to > hardware dirver, there is no driver installed.. any suggestion? or lists any driver compatible with my laptop..

View 1 Replies View Related

Debian Configuration :: Kernel Modesetting Breaks Graphics?

Aug 1, 2010

Enabling kernel modesetting on my computer breaks graphics, but Xorg.log and syslog don't tell me much, because they don't log any error.

The symptoms are the following: boot goes on normally, then the KDM login screen is corrupted. On the login screen there is a big square instead of the cursor, and that square does move as I move the mouse. If I press Ctrl+Alt+F1 I'll get a black screen instead of the terminal, and from there I cannot go back to virtual terminal 7 for login. The only thing I can do is to issue sys-requests for read-only remount and reboot.

Where could I start looking for the problem? What does it seem to be related to, Xorg, kernel, radeon driver?

View 3 Replies View Related

Ubuntu Installation :: Broadcom STA Driver And Hardware Is Not Detected On Windows

Dec 16, 2010

I have installed ubuntu in my windows vista using wubi. Wireless isn't working in ubuntu, so I have to install Broadcom STA proprietary wireless driver and it works fine in ubuntu. when I reboot into windows, to my shock, hardware isn't been recognised in windows. This is not first time I experienced it. I had same problem when i installed nvidia drivers on another dell precision. Its graphics got screwed and never been recovered. I tried re installing windows but problem still persists.

View 1 Replies View Related

Software :: VGA Output Not Detected With Nvidia 256.44 Driver

Aug 22, 2010

I'm having a problem with getting the VGA out to work on my laptop. I have a Sony Vaio F series running Fedora 13 64bit with an Nvidia 330M on driver 254.44. Quite simply, the VGA out is not detected although the HDMI out is. how to correct this?

View 2 Replies View Related

Ubuntu Multimedia :: No Sound Card Detected After Installing ALSA Driver

Jan 3, 2010

I don't have any sound after installing Linuxant ALSA driver. I tried uninstalling it and the hsf driver, didn't help. Reinstalling ALSA didn't help either. Ubuntu doesn't detect my sound card, and aplay doesn't detect my sound card. lspci -v output for sound card:

Code:

00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1)
Subsystem: Acer Incorporated [ALI] Device 0126
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 10

[code]....

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved