OpenSUSE Hardware :: Libatiuki.so.1 Missing After Attempt To Fix Onboard Ati Card?
Dec 10, 2010
After I tried to make my onboard video card (radeon x1250) work with openGL (I didn't succeed), it went bad. I get this error when I attempt to start VirtualBox: VirtualBox: supR3HardenedMainGetTrustedMain: dlopen("/usr/lib/virtualbox/VirtualBox.so",) failed: libatiuki.so.1: cannot open shared object file: No such file or directory Other software also misbehave.how to "reset" the video drivers?
View 2 Replies
ADVERTISEMENT
Jan 18, 2011
I am running OpenSuse 11.3 64 bit and I just tried to install Virtualbox 4.0.0-22.1 from the Virtualization repository.
--
ttblum@toddb05:~> VirtualBox
VirtualBox: supR3HardenedMainGetTrustedMain: dlopen("/usr/lib/virtualbox/VirtualBox.so",) failed:
[code]....
View 3 Replies
View Related
Mar 14, 2011
Is there a driver for my onboard network card? According to Windows it is Realtec PCIe GBE Family Controller.
View 1 Replies
View Related
Nov 22, 2010
I am facing problem with onboard lan card. i think its not detecting. when i type ifconfig command it shows below details
I have installed red hat. but not able to give ip.
View 3 Replies
View Related
Jun 8, 2010
I have just install Redhat Enterprise Linux5, 2.6 kernel,Foxconn motherboard,model 45GMX-V but Linux did not detect the Onboard LAN card.Although when i use winxp it detects the card as RTL8139/810x.
View 4 Replies
View Related
Mar 13, 2010
Ubuntu 9.10Code:$ uname -aLinux ubuntubear 2.6.31-20-generic #57-Ubuntu SMP Mon Feb 8 09:02:26 UTC 2010 x86_64 GNU/LinuxI have ASUS M4A78-E motherboard. I've disabled Onboard sound card (VIA VT1708S) and installed Audigy sound card (c-media sb 8738 5.1 channel (CMI8738/PCI-6ch-LX)). But my system still detects Onboard sound card.
Code:
$ alsamixer
AlsaMixer v1.0.20 (Press Escape to quit)
[code]....
View 2 Replies
View Related
Dec 12, 2010
I use 64-bit Ubuntu Lucid. This machine has an onboard Nvidia sound chip (which can not be disabled in BIOS), I also have an Soundblaster Audigy 2 card, which i'd rather use.
Previously, this was impossible because Ubuntu could only configure the first card. However, with the event of 10.4 and the easy-to-use selector in Sound Preferences I was hopeful that it would work now. But no luck.
I should mention that this machine dual boots to Win XP, and the Audigy works like a charm there, so it must be a Ubuntu problem. The Audigy 2 card is detected by Ubuntu, and is selectable in Sound Preferences, playback is fine with no errors, the source appears in Sound Preferences, but no sound.
These are the steps I have tried, without success:
- Disable the on-board card in Sound Preferences
- Cranking all the sliders to max in Alsamixer
- Checking that there's no mute in Alsamixer, Sound Preferences, Volume Control
- Adding lines to the bottom of /etc/modprobe.d/alsa-base making the Audigy the default card (0), and the Nvidia secondary (1). The output of
Code:
Now reads:
Code:
View 3 Replies
View Related
Jul 26, 2010
I'm looking at upgrading my motherboard and graphics card. Ideally, I'd like to have 2 monitors running at once (DVI), and an output to an LCD projector (HDMI). If I can't have all 3 working at once, I'd like the 2 monitors on all the time (off the graphics card), and then switch from the monitors to the HDMI output so that only the projector is getting video.
So, If I get a motherboard with onboard HDMI, would it be possible to run the HDMI out at the same time as the graphics card output?
View 1 Replies
View Related
Jun 17, 2010
I installed Edubuntu 9.10 on a Dell Optiplex GX260. This system has onboard INtell 846G series video. I want to install an NVIDIA video card. I popped it in the case, diabled the onboard video. I get the POST, the GRUB, no problem. But once I get past the GRUB, all I get is a blank screen. The HDD does not sound like Ubuntu is loading.
View 9 Replies
View Related
Sep 8, 2010
I just built a computer and the onboard nic pluggin is loose and won't register or connect right... so I had to put another nic card in pci to connect to wired network for internet. Problem now is its delaying something fierce... i'm thinking if i can manage to uninstall or disable the onboard nic maybe things would work better... problem is i wouldn't know how to do it... I know hardware is connected via a document somewhere in the file system... if I were to delete the file would that disable the nic or would it just reinstall itself on the next boot?
View 1 Replies
View Related
Sep 28, 2014
The ethernet adapter on my Asrock H97M ITx/AC motherboard isn't recognized during install. It's a Qualcomm Atheros AR8171 and none of the available options like alx or e1000e are working.
I originally tried to install openmediavault [URL] .... - which is based on debian - from an USB Stick and only came up tothe point where it tries to recognize the network card. It couldn't and promted me to choose one manually. So I checked the specs of my motherboard (a shiny new Asrock H97M ITx/AC with a Qualcomm Atheros AR8171) and after a short search I narrowed it down to alx or e1000e. Both of which only triggered a short flash of the interface and nothing more. I guess that's linux' way of sticking its tongue out at me.
For the last 2 days I therefore searched high and low and came across many possible solutions that either didn't work or included too much linux lingo that I couldn't understand it.
One solutions was to install a vanilla debian and then somehow install OMV over it, but debian itself couldn't recognize the network card either. So now I have a pretty minimal debian (CD1 install only) running but how to make it recognize and use the onboard network device.
Just out of curiosity, I plugged in an old hard drive with Win7 that hasn't been updated for at least 10 months. It only had a driver for AR8131 and warned me of using that, but it worked totally fine. Debian however doesn't even try to use an old driver but just flashes its interface at me.
Is there a way to make it work or is this board just not supported by debian and I have to resort to some other distro or a windows installation?
View 4 Replies
View Related
Apr 10, 2010
I have used a wireless LAN PCI card for 3 years and now I want to switch back to the onboard wired LAN card but I cant get it to recognize and I have enabled it in BIOS also the wireless LAN card has been removed.Should I put it back in and then try to switch?
View 6 Replies
View Related
Nov 22, 2010
I know there are many threads on similar issues but I can't find anything that will work. Not sure if I need drivers or what to do - I feel really stupid as I should be able to get this right but I am at a brick wall. Basically I have a 20inch monitor hooked up to the on-board graphics card and cannot get higher resolution than 900 x 600. It should be at 1280 by 1240. This is a brand new install with the latest Ubuntu 10. Under monitor preferences its says 'unknown' for monitor type and I don't have any driver disk for this screen but never needed one previously.
[Code]...
View 1 Replies
View Related
Mar 3, 2010
was assign to set up a network server that has 4 land card including the onboard 3 dsl connection
View 1 Replies
View Related
Apr 24, 2011
I have installed Fedora 14 on Intel's DH67BL mother board, which has a on board LAN port, Fedora 14 does not detect on-board LAN. Unfortunately, intel does not provide any driver support for linux OS :-(. However, if I install an additional LAN card, Fedora 14 detects it and everything works fine.
View 5 Replies
View Related
Apr 25, 2010
I'm having trouble getting X to work after switching from onboard intel video to a 5000 series ATI card. Apparently I need to switch to a MESA or fglrx driver. I did a sudo apt-get install fglrx-driver and it installed but still no X. I'm currently using Karmic. I've tried to boot with a live CD which works fine and changed the xorg file manual but that was a mess.
When I start I get a checking battery state ... done and it stays there forever sometimes and sometimes I can login but without x. Typing startx gives me a long list that says check the xorg website. I've been looking around for a way to fix this and haven't been able to get it working.
View 6 Replies
View Related
Sep 5, 2015
I'm running hardware already considered legacy and I was made painfully aware that those drivers, for ATI cards, are only available from Jessie repositories; yet, somehow I was able to have my system configured to run not the stock drivers the system used for installation but, allegedly, proprietary drivers.
I did notice an overall improvement on how the system displays everything on the screen but after fumbling around the system trying to install a game I had a message warning that only software acceleration was activated and not full hardware acceleration, which was what I was aiming at.
After going through a lot of guides on the web I was able to:
a) discover the system is running MESA drivers (or so I have understood)
b) install headers for my system but somehow along the way I fumbled whatever I was doing and I probably now have a lot of loose ends in the system
Being Debian (and rock solid) the system is still running smoothly but I really want to clean up after myself and correct what I can and improve where is possible.
View 3 Replies
View Related
Jul 1, 2011
I have a strange problem. An old PC is my home server. On the PC I had in the long past 2 NICs. For the last year or so, I had only one NIC installed, a Compex with 8139too module which run just fine. After the upgrade to 11.4, 32bit of course, with zypper dup, I saw that I had no internet and no network connection to the server. So, I logged on the server and found that rcnetwork could not start the eth0 and eth3(!). OK, a mistake I thought. Enter Yast and solve it. Unfortunately, yast reports 2 cards! I removed all of them, rebooted but nothing. lspci reports 2 cards, while I have NONE installed on the motherboard!hwinfo --netcard the same! yast the same! So, the OS "knows" that I have 2 NICs, while I definitely have none!
Checked if /etc/udev/rules.d/70- had any left data from the past, but the file was empty. Checked the /etc/sysconfig/network/scripts nothing again.In principle, the openSUSE 11.4 believes that I have 2 cards (and with wrong MACs, obviously) and I cannot make it rescan the PCI bus to find that I have nothing! I am sure that some garbages are left somewhere but I don't know where to look at. it is very critical to have that server but on-line and in my LAN.
View 9 Replies
View Related
Mar 27, 2011
I recently installed suse 11.4 x64 onto my hp tx2000 tablet. everything has been working great including the wifi card. It's a broadcom 4328 a/b/g/n/bluetooth card and it was using the broadcom-wl driver. Earlier today i plugged in an usb wifi adapter to test whether it worked on suse plug and play. Well after plugging in and using this wireless adapter, my internal wifi card is no longer visible to the system. I've tried lspci and its not displayed. I booted into a different suse install and it wont work there. My bios does not seem to have a disable feature and the killswitch is in the correct position. The bluetooth is working but the wifi is not. In lspci i used to see "hp integrated (wireless+bluetooth)" and "broadcom 4328..." but now only the former.
View 9 Replies
View Related
Jun 19, 2011
Got a bit of a problem where xorg can't start kdm. I pulled out a dying AGP card to try and switch to onboard video, and I think the previous configuration is gumming up the works.I've been running this system for quite a while, as you'll be able to tell from the version numbers.Would like to avoid having to transport my Amarok databases to a new server. I make heavy use of the song ratings and whenever I try to transport the database from the old system to a fresh build I have to spend hours relearning sql commands.Any ideas how to either fix the resolutions on the ATI or (preferably) get KDE to start on the onboard graphics?
View 3 Replies
View Related
Aug 9, 2011
I am setting up a mythtv/xmbc box on Ubuntu 10.10 (natty does not install on my hardware). I have a Sabrent TV PCIRC tuner card, which seems to work fine with the proper card and tuner settings. My on-board sound is HDA-Intel surround sound, which I have configured as analog duplex.
Currently the sound works fine through my speakers plugged into any jack on the back of the PC (two speakers, one jack). I can watch ripped movies and listen to music. The TV tuner is pumping sound from its external jack -- if I hook it up directly to the speakers it works fine. I can feed the Tuner's sound to the line-in on my motherboard, but nothing comes out. In the sound manager, i have the input device selected and the input level shows that the sound is coming in through the connector, and I can test the speakers and they work fine, but they don't seem to be communicating that the sound coming in needs to be pumped out through the speakers.
View 2 Replies
View Related
Aug 3, 2010
I totally wiped out my OSX on my Imacs, in favor of OpenSuse 11.3, and right now, while 11.3 recognizes almost everything, I am searching for a command that lists the hardware available on my Imacs. Is there such a command available, and what is it. I am trying to get 11.3 to recognize my onboard webcam.
View 3 Replies
View Related
May 17, 2010
Now that I set up a 4x750GB OnBoard RAID 10, I'd like to install my 11.2 Suse (w/ GRUB dual boot)from BIOS, I've partitioned my HDD so I have:- Array1 = 30GB HTFS, 30GB XFS, 30GB Solaris, then extended part. for all (each OS) swap, temp, etc ...- Array2 = 30 GB HTFS (DMy Documents); 30 GB (/home); 30 GB (unformated) and then a big part for game install and VMware partition (Win98 for my old games, winXP32, etc ...)As a (sad) matter of fact, instal WinXP64 and/or Vista64 works perfectly. I see the array as partitioned by BIOS, and everything works.
But I can't have my 11.2 (64) SUSE installed on the drive, I have -for now- a VMware for it running ... on Windows :s(while I'd prefere the opposit)When I start w/ Suse11.2 DVD (downloaded), it says it can't install as there is NO HDD !!ok, fine, I plug back a PATA HDD, then I start the install, then I move the partition to the SATABUT, even so, I can't start the Suse ...I then lauch the repare/recovery on the install DVD, but it says that there is no root partition, no SUSE partition to fixe
View 9 Replies
View Related
Apr 12, 2011
I have the MCP55 HD Audio on board. Is there a way to configure the mic to mono, 16 bit with 16000Hz sampling as a system input. The signal will be read by the installed program pocketsphinx_continuous.
This is not to make recordings. I can make these settings in KRecord/KDE3. This is for the system input. The mic works with the program and KRecord.
Or must a compatible sound card be installed?
openSUSE 11.3 x86_64
Kernel 2.6.34.7-0.7-desktop
KDE 4.4.4. rel 3
HP xw9400 AMD 64 Opteron
OCZ Vertex 60 GB dedicated system drive--single boot
4 GB ECC RAM
nVidia GeForce 210 512 MB
Proprietary nVidia RPM drivers
View 2 Replies
View Related
Apr 6, 2010
I installed from a live CD when it came to selecting the partition I re-sized the partition that Ubuntu was on because it was 68 gigs I shaved off 15 gigs for SUSE. Then I selected this new 15gig partition to install SUSE on, everything went fine with the installation I was tinkering around on SUSE but of course I needed internet access, so I go to get on Ubuntu where I had my file with my network key. I restarted expecting to see the usual GRUB boot-loader screen only now with an added option for SUSE. Instead I see an entirely new layout for the GRUB boot loader and all that is listed is SUSE, Failsafe SUSE, Windows XP, and Floppy. The Windows is my XP install and it loads fine sadly it is actually what I'm using now because it is the only thing left that I have my network key saved so I can get on this forum.
Looking on SUSE I notice that the 50gig partition formerly known as Ubuntu still exists I figure no problem add the partition back on to the boot-loader and I'm good to go. Added it and when I select to load it nothing happens it starts to then reverts back to the OS list. Does anyone A) Know how to resolve this or have any ideas. B) Think I can at least copy files off that 50 gig partition to an external hard drive.
View 9 Replies
View Related
Sep 22, 2010
If you attempt to install VLC by simply adding the VideoLAN repository to YAST, the version that's installed won't have audio.Follow the Zypper instructions on the VideoLAN website (bottom of the page)VideoLAN - VLC media player for openSUSE Be sure to specify 11.3 as described, and VLC will install fine.
View 7 Replies
View Related
Mar 17, 2011
I tried to install OpenSuse via LiveCD this morning I got following Error Message: Kernel panic - not syncing:
[code]....
I am using the 32bit-Version of OpenSuse while running this on a 64bit Dualcore. Could that cause the issue?
View 4 Replies
View Related
Sep 1, 2010
I have ubuntu 10.4 32 bit. I have 2x gtx 285's in sli that work perfectly fine in sli in windows (so its not a hardware not properly physically installed issue). But in ubuntu in the x server settings only one of the cards shows up. I was wondering if this is a 32 bit issue as in the past running 64 bit they have both shown up fine.
View 6 Replies
View Related
Dec 17, 2010
This may sound ridiculous, but after installing Debian 5 (from CD 1) in my laptop, ASUS UL80VT, it fails to detect the Ethernet device. The device is "Atheros AR8131 PCI-E Ethernet Controller". I guess the problem comes with the old kernel of version 5. I was intending to compile the latest kernel anyway. But the problem is is there any heads up i need to download the kernel and trying to compile it? Is there anyone who uses Debian on UL80VT. If there is, does it works okay?In short I want to compile the latest kernel, hoping it will fix the Ethernet device. There are installers available with the latest kernel. But I want to do it on my own.
View 4 Replies
View Related
Dec 6, 2009
i have a little experience with ubuntu but i have had bugs that are not resolvable at this time in ubuntu. so instead of giving wild bill back my pc i am looking for a new distro. my concerns with ubuntu revolve around acpi. no fan control and high temp. the 2nd problem that is almost overlookable is the ata1 softreset error. it usually is no problem but occasionally have to do manual fsck to fix. so heres my laptop specs. toshiba a305d-s6848. amd turion x2 ati x1250 integrated. 3gb ram. 500gb hd vista and ubuntu 9.04 dual boot grub with 100gb ubuntu and the rest vista. so q1= what suse version would be best?
q2= is suse's acpi better? ubuntu runs all features but fan control
q3= is suse as easy to install? or harder
q4= ati graphics i know for my card went to legacy what version still has the ati drivers for my card
q5= is suse easier or harder to work with and get everything working.
i know no linux is or opsys is perfect. im just looking for one that is stable and works the pc correctly. i know its a big thing to ask. i know no one can tell me that. but just looking for suggestions. im thinking of downloading suse and does all the downloads support live sessions.
View 9 Replies
View Related
