I have a stereo in my office. Its really a DVD player that will also play CD's. It has a nice surround sound setup. I have a bunch of mp3's on my computer that I would like to burn to a blank DVD that I have and play one long continuous DVD audio CD. Is this possible and if so, how do I do this? I have search for three days, and have come up empty.
View 2 RepliesI have a stereo in my office. Its really a DVD player that will also play CD's. It has a nice surround sound setup. I have a bunch of mp3's on my computer that I would like to burn to a blank DVD that I have and play one long continuous DVD audio CD. Is this possible and if so, how do I do this? I have search for three days, and have come up empty.
View 2 Replies View RelatedOther day i installed limewire downloaded some music i went to burn them and did something wrong? after it was done i went out to my car ( can play MP3's in car) to see how it sounds and came up with a error i think what i did was just copy them over and burned them NOT convert or change to audio cd? steps or program to use that burns them into a audio cd and do i have to convert them first and can i use a DVD cd? (if not no biggie will use regular cd)
View 2 Replies View RelatedA friend of mine has downloaded an album from itunes for me because I could not do it from Ubuntu. Afterwards he sent me the files.
Is there any way I can burn these files to an audio CD from Ubuntu?
Also... Can I just put these .m4a files on a USB stick along with my .mp3`s and expect all car radios to be able to play them?
I had this issue in Slackware64 13 but I had hoped that it would have been fixed in 13.1. I have my permissions setup correctly, I can even burn DVDs just fine, but every audio CD I try to burn in k3b gives me an unknown error with regard to cdrtools (254). It gives me this error at about 200mb of writing every single time, even when simulating the burn. Here is the error log that k3b puts out.
Code:
Devices
-----------------------
TSSTcorp CDDVDW SH-S223C SB02 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite, Layer Jump] [%7]
[Code].....
I am having problems burning audio CDs with Brasero 2.30.0 after my upgrade to 10.04. I was trying to burn a .wav file to CD but Brasero ejects the media without burning anything after transcoding the wav file and creating an image. I'm attaching the error log to aid in debugging.I can burn data CDs fine. My burner, a Samsung SM-308B, can't burn DVDs so I don't know about burning them.
View 9 Replies View RelatedWe tried to burn an audio cd with the default burner in Ubuntu, but we can only play the cd on the computer. I was not in front of the computer, another user was, but I think they used Audio CD Extractor )
View 4 Replies View RelatedI need to burn some music to a dvd (I don't have enough CDs to fit the music on them) I don't need to play the music on a CD player just a dvd player. How do I do this?If I can't do this, then how do I add a (blank) video to a lot of individual audio files?
View 5 Replies View RelatedI recently installed OpenSuse 11.1 (i586) on a new laptop (HP 6710b) all has been going well, until I tried to burn audio CDs with K3B using .wav files in a directory in the format 01.wav 02.wav 03.wav etc. To burn the audio CDs I have been running K3B as root to avoid any potential permission issues. I now have a stack of cd 'coasters' with only one lucky success using the command line, which when the exact command was repeated failed again. I have successfully burnt 2 data DVDs using K3B, one as root the second as user, both without problem - so maybe it is not a permissions problem?
I am using K3b 1.0.5 in KDE 4.1.3. (it runs under KDE3) I have not been able to run k3bsetup � it is not part of the installation. However permissions appear correctly set-up � I also added the appropriate users to the group �disk�.
/dev/cdrom lrw-rw----root disk (just points to /dev/sr0)
/dev/sr0 -rw-rw---- root disk
/usr/bin/cdrecord lrwxr-xr-x root root (just points to /usr/bin/wodim)
/usr/bin/wodim-rwxr-xr-xroot root
K3b uses the executables in /usr/bin/x11/ which are just the same. I have not put suid on anything. I tried running cdrecord as a user, however the burn failed.I checked the .wav files and they play fine in kaffeine. I am using the same brand of blank CDs as the DVDs.I have not had the occasion to try a data CD � I've run out of blank disks for the moment.
K3b detects my DVD/CD burner as:
The system device is /dev/sr0
interfaceGeneric SCSI
Vendor HL-DT-ST
DescriptionDVDRAM GSA-T40L
FirmwareKC07
I tried burning audio CDs in both TAO and DAO mode, neither with success.
Here is an example shortened K3b output:
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
[code]....
I've just arrived in Linux. I like it very much but some problems are arising...for example how can I burn an audio CD using hp3 files with K3b?
View 5 Replies View RelatedMy car plays only DVD-a disk's. Is there a tools in linux that burns Audio dvd, I have checked cdrecord, But I haven't seen anything about audio DVD?
View 5 Replies View RelatedFor the longest I have been unable to burn an audio CD that contains ogg files with GnomeBaker, and have always had to decode to wav manually. Well I'm tired of doing that, so want to get to the bottom of the problem. Upon adding an ogg file to the file list, the error I receive is:
"The plugin to handle a file of type audio/ogg is not installed." I have all the gstreamer0.10-plugins-[base|bad|good|ugly] packages installed. I can play an .ogg file with rhythmbox.
Using gconf-editor, /system/gstreamer/0.10/audio/profiles/cdlossy is "active" and the cdlossy profile is listed in /system/gstreamer/0.10/audio/global/profile_list At a loss on what I need to do.
This happens every time I try to burn an audio CD burning data CD seems to work fine.I open Brasero, click Audio project, drag a couple of FLAC files into it and try to burn, or in this particular case, create an image.A dialogue pops up where I am supposed to tell it where to put the image. I click Desktop but I don't change the file name (something like brasero.cue or whatever).Then it starts doing things but after a short while I get an error message and I am asked to save the log file, which I did and here it is:
Code:
Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1741)
BraseroNormalize called brasero_job_get_action
[code]....
Brasero is broken ([URL] .... - "impossible to link plugin pads") and neither Devede nor CD/DVD Creator offer me the classical Audio CD format.
What is a simple and fast way to get Debian/GNOME to burn an Audio CD. Blimey, that can't be that difficult??
im trying to burn an audio cd with brasero,when i select the audio files to add to the project i get an error message saying :"Track 1.wav" could not be opened." and :"Track 1.wav" is not suitable for audio or video media."i also tried the "copy cd" option,the program recognizes the audio cd in my drive but when i press the copy button the window disappears and nothing happen.i had a similar problem lately see thread - cant burn dvd,but this time i want to try and use brasero instead of k3b
View 7 Replies View RelatedI am not able to burn audio CDs with Brasero 2.30.1, which uses cdrdao 1.2.3 However, Opensuse 11.3 comes with cdrdao 1.2.2 I don't feel comfortable replacing the version myself. Is there any plans to update cdrdao for Opensuse any time soon? PS: I am running Gnome in Opensuse 11.3
View 2 Replies View RelatedI want to burn a mp3 cd but brasero can't burn mp3 cd. How can I do this. If any further software need burn mp3 cd
View 3 Replies View RelatedHow I would capture on-screen audio AND my webcam audio at the same time.(My webcam seems to rely on pulse).
View 1 Replies View RelatedI want to listen to this audio file: [URL] but my real player 11.0.0.4028 gold desn play it, it says that there is a codec 28_8 missing, I go to relaplayer page, download the last release available for linux systems, but the message is the same : audio codec missing and doesn't play the audio.
I havev tried to play the audio with smplayer (not luck), vlc can play the audio but the pause button doesn't work so I have to listen the entire audio all the time I stop it playing. Is there any audio player capable od reproducing in the proper way this audio in ubuntu? No one of my video players totem, smplayer, realplayer or vlc are capable of playing this video: [URL]
I am fed up of listening to my (Windows XP) gaming computer through headphones so I want to get it hooked to the stereo.
Rather than use a heck of a lot of wire, I can sit my Ubuntu 9.10 netbook on top of the stereo and stream the audio across WiFi.
So, ideally what I am after is something to capture the outgoing audio on the Windows computer, stream it across the wifi to the Ubuntu netbook and finally play it through the speakers.
What is available for ripping audio CDs besides Rhythymbox and Audio CD Extractor?
View 6 Replies View RelatedI have behringer UCA202 usb card, after plug to usb, it just works , I have only small problem with alsamixer, which still shows by default my integrated HDA Intel, I could switch it by F6 or by alsamixer -c 1no problem, but I expect that default card is now plugged "USB audio", so why alsamixer recognize default audio device as HDA intel and not a USB Audio ?anyone who has two or more sound cards with the same issue ?
View 3 Replies View RelatedI'm thinking of installing openSUSE-11.1 Gnome on a Fujitsu-Siemens Amilo 7400M laptop because the wireless in Gnome is much more user friendly than KDE3/KDE4 in openSUSE-11.1. The idea is to give this laptop to my 84-year old mother and things need to 'just work' for her (she currently has a desktop running openSUSE-11.1 KDE3 that uses a WIRED interface to the web).
I refuse to update this laptop to openSUSE-11.2 nor 11.3 (nor other recent distributions) because every kernel update after the 2.6.27 kernel has broken the Intel i855GM graphics drivers for that laptop. There are many bug reports and none have fixed the problem for this Fujitsu-Siemens implementation of the i855GM graphics.
Hence I am looking at Gnome.
I booted the laptop to a Gnome openSUSE-11.1 liveCD and wireless is easy and works great. But audio is very very VERY bad. It is incredibly user unfriendly and it does NOT work well. I assume that is because pulse audio in openSUSE-11.1 was very immature.
I note these updated packages in the openSUSE-11.1 update repository:
Code:
So my question is, did the updates to pulse audio (in the openSUSE-11.1 update repository) fix the pulse audio situation? Are there ANY helpful views on this?
Currently my wife is using this laptop with KDE-4.4.4 (and openSUSE-11.1) so I can't just install Gnome and play with it without taking the laptop away from her for a while (note the hard drive is too small for a dual boot of KDE/Gnome).
I have been using windows operating system for a long time now, but I am not well familiar with linux. Whenever I used to install Windows, I used to install the corresponding audio drivers(in order to listen to the music). The problem I am facing is that I do not know how to install the audio drivers(if they really exist in linux Mint 10 operating system). As a result I am not able to listen to any audio file due to lack of corresponding audio driver programs. make proper configurations settings so that I can listen to audio files in Linux Mint version 10.
View 4 Replies View RelatedI am having trouble getting the pulse audio server to find the hw0 with the common m-audio 24/96 audiophile. This card worked with previous versions of all forms of pulse but seems to bork on the HW0 function for audio out...which is a stereo analogue simple output. Audacity sees the HW functions but pulse does not! Here is a screen shot of the pulse crap. And another screen shot of what the real card at "alsamixer -c 0" sees. There is no dac or adc detected or configured with pulse. This does not make any sense as alsa and alsamixer has all the correct device controls available to any other software that uses the ice1712 driver.
I am using Fedora 12 amd 64 as a live usb on a 16 gig stick and want to be able to record and mix audio on to HD with my reliable high end m-audio pci sound card without having to mess with the pulse crap or having to install a full HD option. BTW in the pulse sound configuration gui dropdown list there is no indication of HW0 and the only devices that are available in pulse are digital outs.....go figure, so essentially I can see all the correct connections and use programs that access alsa directly eg: audacity but have no sound through the crappy and ever borked pulse audio server! Any suggestions as to how to remove all the pulse stuff that comes with most distros that use gnome? I have done this deed before with Ubuntu but do no know how to do the deed with an rpm based system. If I install a non pulse version of xmms and let it use jackd then I should have reliable sound for cd audio etc and should be able to configure VLC, Ardour and Nted well without pulse getting in on the action and screwing up my sound.
to start off, i'll post the specs of the machine:
dell inspiron e1505
3.2 gb ram
1.86 ghz intel core duo
ati x1400 gfx
opensuse 11.4 kde 32 bit.
okay, here are the details: can't play any audio with amarok when desktop effects are enabled because the minute a window is moved, it will distort the audio. even when disabling desktop effects, some applications still cause this. can't play videos videos even with desktop effects disabled because of the same reason.
i just switched from ubuntu and when i ran version 11.04, i had to disable kms to do anything. i tried on opensuse 11.4 and the audio was flawless but the gfx went all to hell.
I am having some issues with getting Ubuntu Studio 10.04 to work correctly on my system. Everything works fine except sound. I have a M-Audio Delta 66 audio interface and my onboard sound is disabled. When I run the command alsaconf I can see the ICE1712 card without issue. However when I run alsamixer the only option it is giving me is my HD sound from my ATI video card. For some reason it seems the ATI card has locked the audio to it with no way to remove it. I have reinstalled the alsa drivers for my card and can only see it through alsaconf. When I tell alsaconf to configure the ICE1712 card it says it configured it properly.When I run the command envy24control it says no ICE1712 cards were found.
View 9 Replies View RelatedIs there an application that anyone knows about that I can use to convert either an .flv or .ogg file that contains both audio and video to just an audio .ogg file (preferably vorbis+theora) without audacity? I'm fairly certain audacity could accomplish this but it seems like overkill for what I'm trying to do and the computer I'm trying to use does not run it so well.
::EDIT:: I should also mention that I've tried looking on google. I did find downloadhelper extension for firefox which uses ffmpeg to convert the files but I don't see any obvious way to strip the video.
on my PC I have 2 sound drivers, one from the mainboard (AC97) and one PCI card (ES1969). Because the mainboard sound path did not recording, I installed the PCI sound card and with 11.1, I managed it to play and record all audio data. With 11.2 the PCI sound path plays the system sounds (suse start-up or shut-down sounds) but not the streaming audio data (skype, flash player). But these are played by the mainboard audio instead. The audio-tests from yast->hardware->sound work for both paths. How should I configure the system to redirect the audio streams to the desired (PCI) audio path? The PCI audio is set as primary sound card and is not muted.
View 2 Replies View RelatedSay I have 2 speakers connected to 2 different sound cards. Under Windows, is it possible to have some sort of virtual device that would forward an audio stream to both sound cards? If this can't be easily done under Windows, a solution for Linux is also fine. lternatively, if the 2 speakers are connected to different channels of a sound card, is there any vendor-independent way to duplicate audio to both channels?
View 1 Replies View Related