Installed ubuntu 10.10 without any problems. Everything works fine until i installed the ati display drivers. After this ubuntu shows me 3 different screens before login that apparently broken (see attachments). After the last screen the "normal" login screen is shown.If i dont use the drivers everything looks fine, but then my gpu fan (radeon 4890hd) runs at 100% which is a bit noisy.
View 9 RepliesOS Environment : Debian Squeeze, Gnome, Compiz, kernel 2.6.32-5 Hardwares : Pentium4, ATI Radeon 9600 AGP8x
After upgrading the kernel and restarted, I've been having an issue with the screen. After logged in through GDM, the screen starts distorting, creating small colorful object and blurry
Screenshots :
However, this problem does not exist on tty other than used by desktop ( tty1...tty6 is not affected ) And not in GDM too!!! My GDM shows up nicely, I let it there for hours and no distortion, no strange colors whatsoever.
KMS is enabled ( by default ) as I checked :
$ dmesg | grep drm
[ 5.373278] [drm] Initialized drm 1.1.0 20060810
[ 5.782595] [drm] radeon kernel modesetting enabled.
[Code]....
This issue was resolved in Lucid and Maverick; now it's back... This happens after only 2-3 minutes, even when the screen saver is set to activate after 20 minutes. I believe this has something to do with ACPI power management.
View 2 Replies View RelatedWhen I activate the nvidia and restart, the desktop disappears. I have tried re-installing Ubuntu and mint and it keep happening. The computer is has a single core amd athlon 64, 1.5gb's of ram and a nvidia 7300gs card.
View 9 Replies View RelatedI have been trying to install Linux on a olsish computer for a long time now, with no luck :[ Everything goes fine until Ubuntu/mint asks me to activate the nvidia drivers. When I do it and restart and login the there is no desktop. The computer has a single core amd athlon 64, 1.5gb's of ram and a nvidia 7300gs card.
View 3 Replies View RelatedInstalled Ubuntu 10.04 recently. Been exploring it now.
My PC config: Intel Core 2 Duo E7400 @ 2.8 GHz,
Motherboard: Intel DG31 PR
No graphics card.
Display on Ubuntu is not great as compared to Windows 7. Are there any device drivers available for Ubuntu?? Or any other tweak to improve the display?
Also the video playback isn't that great. Videos get stuck once in a while and I also cannot play .MKV videos.
I am using VLC Media Player to play videos.
I've just installed Ubuntu Karmic on a HP pavilion AMD 64 bit.I've a weird problem: the microphone works good, but using skype 2.1 beta, it stops working when te my webcam. Even after restarting skype, the microphone doesn't work. To make the microphone work, it seems to me that I've to reboot.
View 4 Replies View Relatedtoday i was trying to activate KMS by adding:
Code:
radeon.modeset=1
to grub.
it worked fine, and fixed the black-box bug in cairo-dock, and i finally had a nice graphic bootscreen again.
but another bug occured: im running dual-screen setup, my notebook is connected via vga to a dell 22 inch widescreen TFT.
by default both screens running with 60hz and no problem.
now, after activating KMS it happend that, while the dell monitor still ran 60hz, the notebook screen was running with 61hz! it was shown in the monitor-options.
the notebook monitor was therefore flickering a bit for 5 seconds, than running fine for another few seconds. then flickering again. (obviously, as 61hz is too much when it should run with 60hz!)
so my question is: how can i activate KMS again and have both of my screens running with 60hz again? is there an option?
In case somebody has a PC with
- mainboard ok
- RAM ok
- terminal.. ok
- a defect CDROM = no CDROM
- a defect floppy = no floppy
- a defect HDD = no HDD
- an IDE connector inside the PC
- an USB port but cannot boot from there (BIOS is too old).
Then I would
-> buy a compactflash card (>2GB) approx 10 Euros
-> buy an USB-Compactflash adapter approx 5 Euros
-> buy an IDE adapter for compactflash card aprox 20 Euros
-> ask a friend or a shop to install KNOPPIX on USB+Compact Flash (easy on KNOPPIX 6.2 through a menu "install on flash card")
-> put the compactflash + IDE adapter into the PC and boot from there (BIOS setting must be correctly done; easy job)
Then later buy a small HDD for installing the personal data on it. Has somebody a quicker or cheaper method?
I have tried mkfs.jfs but well not working.... The hardisk is bit getting old ...
I have tried gparted but it doesnt do that.
is there a way to get lucid login and boot splash and install them in karmic.
View 2 Replies View RelatedI have been using ubuntu for quite a long time, and for the first time, I am now unable to set nvidia drivers to work. I have just install ubuntu 9.10 amd64 on an AMD 64 athlong X2 with a GEForce 6500 nvidia card.
The only reason I need the proprietary drivers is to use two monitors.
I am going crazy, I have tested everything I have found on the web. I have tried all the nvidia drivers version, I have tried envyng, ... but nvidia do not work!!
I am trying Xinerama with nv, but it does not work either!!!
Here is my xorg.conf file in which I have tried to use nv driver to set dual monitor. X fails to load and it says that screen 0 is deleted, that devices are found but there are no matches in the config file. Any clue?
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
[Code]....
I've been using Ubuntu on and off ever since about 8.04. This newest release (10.04)... wow it's amazing. That's all I can say. The only gripe I have right now is that right after I select Ubuntu from GRUB, the screen goes black for about 10 seconds, then goes to the bootscreen. By the time it gets to the bootscreen, the bootscreen is shown for about 3 seconds, and then I get the lockscreen. I have a nVidia card with proprietary graphics drivers installed.
View 1 Replies View RelatedIm not to sure where to post this, but i upgraded from Ubuntu 10.04 to Ubuntu 10.l0 and it gets stuck at the bootscreen, i followed the instructions on how to do a upgrade. Im not to sure whats caused it or how to solve it, and i dont really want to reinstall 10.04 as i forgot to backup my files
View 5 Replies View RelatedWas messing around with Compiz and plymouth themes. I installed one and now my bootscreen is text of linux mint in the center screen. How am i able to change this back to my plymouth bootscreen
View 3 Replies View RelatedMy native resolution is 1366x768.
View 8 Replies View RelatedI created a key for an ssl site with a passphrase. Worked really well and enjoyed doing it. I then shut down the lpatop and drove back to my parents for easter...
Now Fedora won't fully boot, and I'm just have the line that creeps along the bootom. I've tried a few things, but not having any joy. I obviously need to enter this passphrase, but how should I do this?
Do I go out any get some CD's to make a boot disk? Or is there a way to disable the graphical boot options from grub?
I just downloaded and installed the ATI proprietary drivers from AMD and when I restarted my computer I don't have a display anymore. I can see the loading screen and then its all black.
I went to another shell (tty2) and removed Xorg and re-installed it and that didn't work either!
Recently I upgrade to the latest Nvidia driver for Linux. I checked that it was compatible with my Ubuntu 10.04 x64 system and my geforce gt 220 graphics card. I decided to go with the newest beta ver 260.1904. Installation went well, better actually than other times I tried to install the newest driver from their site. After installation was finished I restarted and let my system load up. As soon as it got past the ubuntu logo, the screen just went blank as if there was no signal.
I determined that everything but the display was working. When I pressed ctrl-alt-F1 the numlock light turned off (this usually happens) and was still toggle-able. When I went through the other x-servers (ctrl-alt-(F2-F6)) the light went out but could be turned off and on by hitting numlock. When booting in from recovery mode, the screen displayed up to the point where it would show recovery options with no noticeable error showing before the screen turned off. This is what worries me the most.I don't think it is my Xorg.conf because I replaced with a backup and still have the same problem.Does anyone have any ideas about why this is happening or how I can at least see the terminal. As a side note, its definitely not the card because the card worked fine before, works in windows and live cds, and I tried with an older nvidia card and had the same problem.
How can I uninstall grub? I have have dual boot between Gentoo and Ubuntu and I want to use the grub, that is on Gentoo partition, as its my main system. I would not care about it as it takes almost no space, but Ubuntu automatically restores its own bootscreen after updates. This is annoying... How to get rid of it?
View 5 Replies View RelatedI just installed Ubuntu last night parallel to windows vista ultimate (no problems). My biggest problem is that when I tried to install the nvidia display drivers, I somehow downloaded a server based driver (and am having amazingly difficult problems). I use a dual monitor set up (both are plug and play LCD displays) and i'm not too worried about aesthetics but rather, performance. I downloaded the correct driver but now I don't know how to install it. Is there a way to uninstall this server driver?
View 1 Replies View RelatedI am using Dell studio 1537. I tried to install propitiatory driver for my ati radeon hd3400. After installation and reboot, I got no display and my system rebooted. Now I had just reinstalled fedora11. Any Way to install ATI driver safely?
View 1 Replies View RelatedI have a Compaq Presario CQ60 laptop with an Nvidia 8200M graphics card. When I try to enable visual effects I am asked to install the Nvidia restricted driver. When I do this and reboot, I get 6 copies of the Ubuntu screen on my display. Does anyone know what is causing this? I'm not sure which version it installed, I assume either 173 or 185. I have downloaded version 190 from the Nvidia web site. Should I install that version? If so, it is a .run file, how do I install it?Also, how do I reinstall the old driver. I fixed the problem this time by reinstalling Ubuntu, but that will get old if I have to do it too often.
View 4 Replies View RelatedJust finished wiping and re-installing F12 From a DVD on an Dell Inspiron 9300 with a NV 6800. The NVidia site driver refused to install, so I used the method documented here
[Code]...
as instructed to in the sticky. On rebooting, after the load animation, the screen goes blank/black. If I click around, I can hear some beeps from the OS so I assume that things are running but i just can't see anything.
I have a MacBookPro5,1 system that can boot into Fedora 12 x64 as well as Mac OS X. My installation of Fedora is set to use the nVidia graphics drivers to provide 3D acceleration when running the operating system natively. I have installed VMware Fusion on Mac OS X, and I can use it to boot my installation of Fedora into a virtual machine. However Fedora refuses to go into X Windows and just sits there with a blank screen. I can use Ctrl+F2 to switch to a command line and log into the system through the command line interface.
I'm not exactly sure why this is happening. However, I suspect that it is because when the system runs virtually, it does not make use of the nVidia graphics card. Instead VMware Fusion provides a virtual VMware SVGA 3D adapter. What would it take so that Fedora would use a driver that is compatible with this virtual display adapter when running in a virtual machine, and then use the nVidia driver when the system boots natively?
I am new to opensuse and have installed 11.2 KDE. It is simply perfect for my system. However after the initial setup the display resolution was set perfectly fine for my 18.5" LED monitor, default resolution was 1366x768, and everything looked good from desktop to fonts but the OSS drivers didn't support compositing so I decided to switch to nvidia drivers. I installed the driver as shown in openSUSE repositories page, for my 6600GT card. Now after rebooting everything is stretched,even the fonts look really ugly and fuzzy.
I am unable to find any mode in Nvidia XServer settings that would correct the current ugly stretched display. I am unable to set 1366x768 manually as well, doing so my PC won't boot to KDM but rather sticks to console. Now it's for sure that my monitor and display card supports 1366x768 resolution but it's just that nvidia drivers/Nvidia XServer settings won't let me set that resolution. How can I set the resolution or even better if I can enable compositing using OSS drivers then that would be great an dm willing to switch back.
I installed openSuSE 11.2 sometime ago in a COMPAQ Presario CQ60-419WM laptop (the ones that Wal-mart sold for $300 about a year-and-a-half ago. I installed the 64-bit version because I saw that the processor could support that (perhaps that was not a good idea). I have some problems that seem related to not having the necessary drivers. My wireless has never worked and my display is far from what I would like it to be (the response is slow, if a drag a window, its motion is jerky, if I scroll down in a browser window, the motion is wavy). The look and feel is very different from what I get at work and I do not know how to fix it.
[code]...
I installed the nvidia proprietary drivers with click-install and everything perfect, I have desktop effects working but the problem is that when you open the config. screen settings to make sure everything was really good, I get to screen unknown April.
The maximum resolution is the correct 1440 * 900 for 19 "but the refresh rate by not recognizing the monitor down to 50hz me and gives me the option to 60hz as it was before installing the nvidia drivers.
How can I fix the display settings?
I am using ubuntu 9.04 on my laptop from past 8 months. These days when I boot my laptop, The booting process takes more time on the following step:
Activating swap file
This must be a repost, but I still want to ask, how do I activate the wireless on my laptop? I've been given advice about this a while back, but forgot. Just reinstalled a fresh copy of 9.10
Or is there an alternative way to do this?