ubuntu 9.10 can't read micro sd? tried to read it using a card reader usb or sort of but it doesn't seem to be recognize... if ubuntu 9.10 can read micro sd using a usb card reader or something, how?
View 5 RepliesI am trying to read my SD car trough the external car reader but it does not work.A bit of maybe relevant info:it a SD adaptor with a micro SD memory of 1 G.It came from a nokia phone.what I know its working:the micro SD card is working came out my mobile phone the reader is working I have tested with other SD card
the only left is the adaptor but very unlikely.Could some one help to with the command from the terminal to find the SD car drive name, mount it, and formatted?
I am using ubuntu 10.04.My samsung e2120 has external micro sd card of 2GB.When i connect mobile to computer via cable in windows , it works normal as USB mass storage as configured by me in mobile settings.But in case of ubuntu 10.04
Code:
$cp /data/to send/khatarnak shayri.txt /media/E0FD-1813/
cp: cannot create regular file `/media/E0FD-1813/khatarnak shayri.txt': Read-only file system
[code].....
i using wine windows windows compatibility layer(beta release) , i tried ride(micro controller and micro prosser simulator)open with wine , but it not work properly..
View 2 Replies View RelatedIntegrated microphone doesn't work with skype, whereas an external one works. The integrated microphone works with "sound recorder" and audacity, pulseaudio input monitor gives its signal but pulseaudio settings don't
Audio: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
My is a Packard Bell netbook
CPU Atom N270 @1.6GHz, 1GB RAM, 160GB HD
O.S. Ubuntu Karmic Koala 9.10
For the last several weeks i've been trying KDE and it's been working quite fine. There are however several minor issues with KDE.
First - how can i format a usb stick? In GNOME after the usb stick has been plugged in one just have to right click on it and select "Format". Here i don't see such an option. I googled it and i read somewhere that the tool for this would be KDE partition manager. I installed it but it looks like an overkill for the task. KDE partition manager is high level tool like GParted, whereas i'm looking for something that integrates into the desktop so i can just right click on the usb drive and select format. Besides KDE partition manager asks for a root password which is logical because it can format all your partitions. However i don't see the need for a root password when one is going to format a usb drive.
Second - i tried to use my micro sd card yesterday and while it mounted automatically i couldn't write anything on it or delete any of the files on it ( didn't have this problem with the usb stick though). How can i change that? I have a default Debian install with a nearly default KDE 4.6.5. In GNOME the SD card was always mounted writable by default.
Third - i am using Iceweasel, Rhythmbox and GIMP which are GTK applications. To make them look OK in KDE i installed gtk2-engines-oxygen and kde-config-gtk-style and i also installed the Oxygen KDE Firefox theme (from here [URL]). I then configured the GTK applications to use the oxygen engine and Rhythmbox and GIMP look perfectly OK (i've attached a screenshot at the bottom of my post) however Iceweasel doesn't look completely OK. The problem is that the color scheme of the window is slightly darker than the color scheme of the upper window border - i've attached screenshots of Rhythmbox and Iceweasel so you can compare. I've tried KDE 4.7 with Arch Linux and Firefox there looks OK just like Rhythmbox. It is a small detail but it bugs me...
Fourth - i have problem with the KDE theme for Firefox which i've installed. Without it Iceweasel doesn't look that good. With it, the find menu (activated with ctrl+f) doesn't work - instead of the regular search field just a very small box appears. I've posted a screenshot for that as well.
I'm using ubuntu karmic 9.10. I used to transfer songs to/from my Creative Zen Micro firmware 1.11.01) using gnomad2 2.9.4 with no problem at all. Suddenly it stopped working. Gnomad2 seems to detect the zen micro but it hangs when "retrieving metadata from jukebox". The zen micro doesn't appear in "places" menu but Inot sure whether this is an issue...when I enter lsusb in a terminal it getsBus 001 Device 004: ID 041e:411e Creative Technology, Ltd Zen Micro
View 6 Replies View RelatedI have a Creative Zen Micro MP3 player (software version 2.21.02) which worked almost in a plug and play fashion with Rhythmbox (0.12) on Jaunty (9.04 / i386). Almost : I just had to make sure that Nautilus had not mounted the Zen as an external medium. Otherwise everything worked as expected.
Now I tried to reuse it on my Karmic Koala (amd64) laptop with Rhythmbox (0.12.7). I've been through several posts but nothing seem to make it work properly : If the Zen is unmounted before starting Rhythmbox it will appear in the media column and it will even show the songs; I can drag and drop songs from the Zen to the Rhythmbox Music library (very slow); but I can't play any song directly from the Zen.Any thoughts on how to get it to :
- speed up transfers between the Zen and the Music library
- play songs from the Zen
I am attampting to get an HDE Webcam to work with Ubuntu 10.10. Ths lsusb entry is:
Code:
Bus 002 Device 002: ID 1c4f:3002 SiGma Micro
The webcam is detected as /dev/ideo0, but when I attempt to use it, I get the following message in dmesg and a black screen instead of video.
Code:
[ 3124.878851] uvcvideo: Failed to query (135) UVC control 11 (unit 2) : -32 (exp. 1).
i have an 8gb sandisk micro sd card that i was having problems with, so i decided to zero it out, problem is now i can't repartition it.i have tried gparted, the disk won't appear, but when it is attached, i can see a /dev/sdb in devices that isn't there otherwise.is it possible to create a new partition table on this, and how?also i am trying to 'sudo mkfs.vfat /dev/sdb' but it is saying
View 5 Replies View RelatedI have checked the forums but can't find a topic that covers this. I have an 8Gb Micro SDHC in a micro reader that I installed 10.10 onto from the Alternate DVD. Unfortunately I neglected to set up the swap and home volumes and I now have a stick with all 8GB used up.
I have configured up Ubuntu to my liking and also added some applications. I would prefer not to lose this and I don't appear to be able to adjust the partition table live to now accommodate the swap and home areas.
Is there a way to do it live or can I boot from the DVD again and adjust the one partition to three such as 4 GB root, 2G Swap and 2 Gb Home?
I have an microsd card reader plugged in with usb. But when i insert my microsd card I can't see it in Dolphin. Do I have to mount it first? and how? and is it possible let it be mounted automaticly when I insert the card?
View 1 Replies View RelatedMaking a custom gui for micro core linux. az i want to make a ditro based on it.
View 8 Replies View RelatedIf this is a problem exactly with Networking or my Laptop...I have a celron laptop 1.5GHZ with 1.5GB ram and 120GB HDD and I have a Intel 965 chipset I guess...
The problem is I have a desktop with ubuntu 10.04 and My network card...Huwaei runs fine but if I install on my latop with above specs it does not detemine the modem but it determines the micro SD in it...
Is the problem related with laptop or my network card...
If it is my latop then which version of UBUNTU should I run....
I have a Xenta micro wifi keyboard which worked fine with 10.04 but after upgading to 10.10 it pairs Ok it does not work. In 10.04 all I had to do was enter the pin on the wifi keyboard.In 10.10 the pin has to be entered on the wifi and local keyboards.
View 1 Replies View Relatedi have a problem with my 8gb mirco SD card. I have to make an ext3 partition on it, but the system do not even recognize it. I have tried with a 2gb card and everything is working right, so the problem isn't my netbook's card reader (it's a samsung n220).
View 1 Replies View RelatedHow to install micro soft fonts in F12, mainly arial in openoffice?
View 1 Replies View RelatedI'm looking for a Micro Distro based on Debian, to install it on a bootable USB stick and to use it as a Thin Client.
View 2 Replies View RelatedI am using Linux 2.6.18 in an embedded appication.I need to store few data logs (fixed size , say around 1 log = 100 bytes)on a micro SD card.My question is 1. Which filesystem should be there on micro SD card , so that data integrity is preserved.2. Is there any file sytem that provides a diagnostic check , to ensure that the filesytem is healthy.
View 1 Replies View RelatedHow I can install Trend Micro ServerProtect on centos 5.3?
View 3 Replies View RelatedI'm very accustomed to using gnome-terminal. Today, out of the blue, the text that shows the things like menu options is extremely small (not readable) (please see screenshot 1).
This is also the case for my favorite text editor gedit (see screenshot 2)
Does anyone know what is causing this and how I can fix it?
I know how to manipulate the size of the text IN the gnome terminal window [from usage: --zoom=ZOOMFACTOR Set the terminal's zoom factor (1.0 = normal size)] but my problem is with the text of the menu options AND --more importantly-- also of the content of gedit text editor.
now using a micro innovations kb400i turbo-trak keyboard and I can't even access the bios before bootup (f2). It's a standard ps/2 plug and it's gotta a qwerty setup (small backspace with big enter key). So basically the fkeys don't work and the 6 key doesn't work (it does on number lock pad). There are some others that don't work as well. I can't use left ctl to copy and paste which I always use however right ctl works. I'm running absolute linux 13.1.0 fully updated and the keyboard layout was set to u.s.a. and basic by default. I've changed it now to be usa and dvorak but I still gotta reboot. So far I don't know if it's a faulty keyboard or maybe this ones just quirky to setup. According to various websites it's a qwerty keyboard and dvorak is the next closes thing.
View 1 Replies View RelatedI fixed VLC to point to the correct device /dev/sr0) I executed sudo apt-get install ubuntu-restricted-extras If I play a music CD instead of a movie DVD, it works correct, so the device must work VLC and Movie Player work correctly with any video file in the computer.
If it helps, this is what the log says:
Oct 31 13:14:39 pablo-laptop kernel: [ 4079.019744] sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Oct 31 13:14:39 pablo-laptop kernel: [ 4079.019752] sr 0:0:1:0: [sr0] Sense Key : Illegal Request [current]
[Code]....
I am currently running Ubuntu 10.10 on my Laptop Computer and along with a plethora of other problems -that I have been able to put up with- I have discovered that, for some unknown reason my laptop is incapable of reading DVD-Roms... what gives?
The only error I receive is, "could not read from resource". I have libdvdread4 installed along with Ubuntu Restricted Extras... due to my limited Ubuntu knowledge I have absolutely no idea what to do next.
Bought new movie the other day and trying to back it up with DVD::RIP. I have used this program for years but today I ran into something new. When I go to read the TOC from the disc I get an error:Code: Fri Aug 12 07:58:49 2011 Job 'Read TOC (lsdvd|tcprobe)' exited with error: Job 'Read TOC (lsdvd)' failed with error message: Error reading table of contents. Please check your DVD device settings in the Preferences and don't forget to put a DVD in the drive.Which is strange because I have every dependency installed and satisfied all the dvdrip requirements.
So I fought back and forth with it for about an hour and decided the check the dvd. The DVDs VIDEO_TS folder is like a whooping 24GB and I cant view the individual VOB files, they look and act scrambled just like if I did not have libdvdcss installed. But here is the kicker.I can watch the DVD just fine if I go to watch it in my PC or in my TV DVD player.
I am trying to get some DVD's to play in Ubuntu 10.10 but whenever i try to play them i get an error message saying "Could not read from resource".
View 8 Replies View RelatedDoes anyone know how to read an .ove (an Overture) file?
View 1 Replies View RelatedI want my iPod to automatically mount as read only. I am hoping this will prevent Rhythmbox from changing my playlist sort order while still allowing me to listen to my music.I've tried a number of things this morning and never got it working properly. I'll try to remember what I tried:gksu gedit fstabI added UUID=5EFC-9810 /media/ipod vfat ro,noexec,noauto,user 0 0cd /mediaudo mkdir ipodMounted the iPod and it showed up twice in Places (possibly as a result of this bug: https://bugs.launchpad.net/ubuntu/+s...fs/+bug/442130). Also, the directory iPod was always listed in Places even when I hadn't connected my iPod. So I listened to the advice there and tried:/dev/disk/by-uuid/5EFC-9810 /media/ipod vfat ro,noexec,noauto 0 0Now I couldn't get my iPod to mount at all. The error given was something like:Error mounting: mount exited with exit code 1...only root can mount media/ipodI was able to chown /ipod but it didn't solve my problem.I started over and tried:UUID=5EFC-9810 /media/ipod vfat ro 0 0
View 3 Replies View Relatedtrying to run stuff from CD or DVD ROMS >without< copying to my cluttered hard drive, and came to a thought that I'd like evaluated: Would it work to perhaps use sed during the cd-rom auto-mount or some other point to enable the executable bit for *.exe and other 'executables' to somehow override the read only factor? I'm not too familiar with sed except that i know it can insert/replace new patterns of data for defined patterns of existing data.. so would something like this work? Could it be implemented as permanent function of Ubuntu to 'checkbox' cd/dvd mounts to insert the exec' bit on all, known, or choice files as a sort of 'virtual' permissions that can be placed on RO mounts?
View 2 Replies View RelatedMy brand new DVD+RW disc can't be read by debian (6.0) after trying to erase and burn a new iso into it. I used brasero for this but it failed to burn it and left it in this bad state. It could be detected before the failed brasero session though.
However, whenever I introduce the dvd into the drive after the brasero session, the dvd drive makes the same noises all the time as if it can't read something on it and is going back to the beginning and doing this all the time over and over again. The data on the dvd is not important but what I want to know is if it is possible to stop the OS from trying to read what's in it so I can use some erasing software to make the dvd useful again.