Ubuntu Installation :: Micro SD Card Can Not Be Read From PC
Jul 8, 2011
I am trying to read my SD car trough the external car reader but it does not work.A bit of maybe relevant info:it a SD adaptor with a micro SD memory of 1 G.It came from a nokia phone.what I know its working:the micro SD card is working came out my mobile phone the reader is working I have tested with other SD card
the only left is the adaptor but very unlikely.Could some one help to with the command from the terminal to find the SD car drive name, mount it, and formatted?
View 2 Replies
ADVERTISEMENT
Aug 23, 2010
I am using ubuntu 10.04.My samsung e2120 has external micro sd card of 2GB.When i connect mobile to computer via cable in windows , it works normal as USB mass storage as configured by me in mobile settings.But in case of ubuntu 10.04
Code:
$cp /data/to send/khatarnak shayri.txt /media/E0FD-1813/
cp: cannot create regular file `/media/E0FD-1813/khatarnak shayri.txt': Read-only file system
[code].....
View 3 Replies
View Related
Nov 16, 2010
ubuntu 9.10 can't read micro sd? tried to read it using a card reader usb or sort of but it doesn't seem to be recognize... if ubuntu 9.10 can read micro sd using a usb card reader or something, how?
View 5 Replies
View Related
Feb 13, 2010
i using wine windows windows compatibility layer(beta release) , i tried ride(micro controller and micro prosser simulator)open with wine , but it not work properly..
View 2 Replies
View Related
Sep 4, 2010
i have an 8gb sandisk micro sd card that i was having problems with, so i decided to zero it out, problem is now i can't repartition it.i have tried gparted, the disk won't appear, but when it is attached, i can see a /dev/sdb in devices that isn't there otherwise.is it possible to create a new partition table on this, and how?also i am trying to 'sudo mkfs.vfat /dev/sdb' but it is saying
View 5 Replies
View Related
Feb 14, 2010
I have an microsd card reader plugged in with usb. But when i insert my microsd card I can't see it in Dolphin. Do I have to mount it first? and how? and is it possible let it be mounted automaticly when I insert the card?
View 1 Replies
View Related
Jan 14, 2011
i have a problem with my 8gb mirco SD card. I have to make an ext3 partition on it, but the system do not even recognize it. I have tried with a 2gb card and everything is working right, so the problem isn't my netbook's card reader (it's a samsung n220).
View 1 Replies
View Related
Aug 24, 2011
For the last several weeks i've been trying KDE and it's been working quite fine. There are however several minor issues with KDE.
First - how can i format a usb stick? In GNOME after the usb stick has been plugged in one just have to right click on it and select "Format". Here i don't see such an option. I googled it and i read somewhere that the tool for this would be KDE partition manager. I installed it but it looks like an overkill for the task. KDE partition manager is high level tool like GParted, whereas i'm looking for something that integrates into the desktop so i can just right click on the usb drive and select format. Besides KDE partition manager asks for a root password which is logical because it can format all your partitions. However i don't see the need for a root password when one is going to format a usb drive.
Second - i tried to use my micro sd card yesterday and while it mounted automatically i couldn't write anything on it or delete any of the files on it ( didn't have this problem with the usb stick though). How can i change that? I have a default Debian install with a nearly default KDE 4.6.5. In GNOME the SD card was always mounted writable by default.
Third - i am using Iceweasel, Rhythmbox and GIMP which are GTK applications. To make them look OK in KDE i installed gtk2-engines-oxygen and kde-config-gtk-style and i also installed the Oxygen KDE Firefox theme (from here [URL]). I then configured the GTK applications to use the oxygen engine and Rhythmbox and GIMP look perfectly OK (i've attached a screenshot at the bottom of my post) however Iceweasel doesn't look completely OK. The problem is that the color scheme of the window is slightly darker than the color scheme of the upper window border - i've attached screenshots of Rhythmbox and Iceweasel so you can compare. I've tried KDE 4.7 with Arch Linux and Firefox there looks OK just like Rhythmbox. It is a small detail but it bugs me...
Fourth - i have problem with the KDE theme for Firefox which i've installed. Without it Iceweasel doesn't look that good. With it, the find menu (activated with ctrl+f) doesn't work - instead of the regular search field just a very small box appears. I've posted a screenshot for that as well.
View 7 Replies
View Related
Dec 23, 2010
I have checked the forums but can't find a topic that covers this. I have an 8Gb Micro SDHC in a micro reader that I installed 10.10 onto from the Alternate DVD. Unfortunately I neglected to set up the swap and home volumes and I now have a stick with all 8GB used up.
I have configured up Ubuntu to my liking and also added some applications. I would prefer not to lose this and I don't appear to be able to adjust the partition table live to now accommodate the swap and home areas.
Is there a way to do it live or can I boot from the DVD again and adjust the one partition to three such as 4 GB root, 2G Swap and 2 Gb Home?
View 2 Replies
View Related
Nov 24, 2010
I have a Xenta micro wifi keyboard which worked fine with 10.04 but after upgading to 10.10 it pairs Ok it does not work. In 10.04 all I had to do was enter the pin on the wifi keyboard.In 10.10 the pin has to be entered on the wifi and local keyboards.
View 1 Replies
View Related
Dec 17, 2010
I am wondering if it would be possible to format an 8g SDHC card in a way that it will be able to be written to and read by an SD reader?
Reading about SDHC vs SD suggests that the only difference is the block/cluster/byte configurations. Is that true?
Could I format the 8g FAT32 SDHC with gparted to a 1g FAT16 partition with the rest of the space left un-formatted so an SD reader could handle it?
View 2 Replies
View Related
Sep 24, 2010
So basically I have an SD Card that I use with primarily with my Wii. This morning I decided to install the HomeBrew Channel on my Wii (I don't think it matters if you know what this is). While trying to run an application my Wii froze, and since then my SD Card has been unreadable, my Wii however is fine.
I assumed I could just pop this card into a computer and format it. There is nothing on the card I need to recover. When I stuck the card into my room mate's computer running Windows (she's the only one who has a SD card slot) Windows Explorer freezes, and remains frozen until I remove the card. I tried using the Disk Management to format the card, but it also freezes upon inserting it.
The only idea I could come up with is booting to my Ubuntu disc on my room mates computer, in the mode that lets me run Ubuntu right off the CD-ROM, and try to format it here. When I insert the card an item called 'SD/MMC Drive' appears but there's no option to format when I right click on it.
Now my linux is a bit rusty, but I thought I could do it by typing "sudo mkdosfs -F 32 -v /dev/sda1". The status seems to indicate it was successful, but the issue still persists.
View 9 Replies
View Related
Apr 24, 2010
Since I've upgraded to Lucid RC1, when I insert my SD Card it mounts as read-only. The write-protected switched isn't on and my card isn't corrupt. I've tried chmod and chown to no avail.Does anyone know a work around so that I'm able to write to my SD Card?
View 2 Replies
View Related
Jun 11, 2010
After 3 days and 2 gallons of sweat and 9 billion forums read I give up, I cannot figure out why Ubuntu 9.10 does not read my wireless card. I have a Lenovo G555, I followed most of the instructions the forums provided online such as ndiswrapper and finding the inf. file within windows, copying it to your usb and than putting it into ubuntu to later use windows wireless drivers to install the driver just to run into a bcmwl6 Invalid Driver! I tried to use terminal with no sucess. Can someone just please give the straight forward how to make this work answer.
View 1 Replies
View Related
Mar 16, 2011
I have an SD card and when I plug it in to my desktop (which is openSUSE 11.3), it shows up in Dolphin and shows all folders and files. however when i try to view or copy a file(either by double clicking or using "cp" command) it throws an error:
Code:
cp: reading `/media/disk/DCIM/100OLYMP/P1010202.JPG': Input/output error
how I can recover these files? Any tools I can use in OpenSUSE?
View 8 Replies
View Related
Oct 7, 2010
With a Netbook that runs Kubuntu 10.04 i have always stored by regular files on a SD card. For ease I have used symbolic links to save and retrive data from the card such as a Documents folder. After a power crash my SD card which has always been read/write has changed to read only. The links do not work and if I try to make a new link "Read-only file system" is the error.
I have tried chmod with the same error message. Device is owned by me not root. Saving to the device also returns the same error message.
I have looked at a couple of similar streams but neither has any final resolution.
changing the SD card back to read/write?
View 3 Replies
View Related
Apr 11, 2010
I have this card reader, it works perfectly on Win7, but when i try to put my xD card in it whilst on Linux, it wont read it, nothing shows up in nautilus nor on the desktop. If it's any use, it's an external, with a USB cable.
View 2 Replies
View Related
Dec 10, 2010
I am new to linux at driver level. I want to read/write at specified memory location in microSD card in linux. I do not want to used SD card with any file system. How to do that. My linux distribution is Fedora13.
View 3 Replies
View Related
Feb 25, 2011
I've got some trouble trying to format a SD card. I tried to format it in the GUI and the terminal, but couldn't make it. I couldn't even copy or move any file to the directory in the SD card, even logged as root.
It's a SD card from a digital camera. When I insert it in the camera, it says the card is blocked, so that it's not possible to take any picture.
I tried using "fdisk" to set a new fyle system in it, and tried "mkdosfs" trying to format it under the current file system.
View 4 Replies
View Related
Mar 4, 2011
The card in question is a PC Card (PCMCIA) 16Bit Intel Series 2 Flash Memory Card (2MB) and I want to be able to read from and write to the card. I've rebuilt latest stable kernel (2.6.37.2) with all the PCMCIA options turned on or built as modules. I've got an SRAM card, a CompactFlash Card (in a CF to PC-Card adapter) and the Linear Flash card to try, the SRAM card I'm not expecting greatness from, but hoping to prove that the slot works (it registers, but doesn't get much reported from lspcmcia). The CF card in the adapter works. I'm expecting to see a block device in /dev but nothing appears lspci:
[Code]....
View 11 Replies
View Related
Jun 12, 2011
I was attempting to reformat a 16GB MicroSD card in my camera when the battery died mid-way. After that, any time I try to read the card in my camera, it gives me a "Card Error" and does not allow me to reformat it in my camera.
So, I thought I would plug the camera in to the laptop with it set to host the card as media when plugged in as USB, in an attempt to fix the formatting issue.
However, when I plug it in to my linux machine, it does not register as a device (e.g., /dev/sda) due to some errors, therefore I cannot reformat it. Essentially, I think I need to fix the partition table but I'm not sure how to when it doesn't register as a device. code...
View 7 Replies
View Related
Dec 12, 2010
I am porting the kernel on my hardware board...dmesg shows that...
mmc0: mvsdio driver initialized, lacking card detect (fall back to polling)
mmc0: host does not support reading read-only switch. assuming write-enable.
mmc0: new high speed SDHC card at address aaaa
[code]....
View 14 Replies
View Related
Jan 15, 2010
Integrated microphone doesn't work with skype, whereas an external one works. The integrated microphone works with "sound recorder" and audacity, pulseaudio input monitor gives its signal but pulseaudio settings don't
Audio: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
My is a Packard Bell netbook
CPU Atom N270 @1.6GHz, 1GB RAM, 160GB HD
O.S. Ubuntu Karmic Koala 9.10
View 2 Replies
View Related
Jan 10, 2011
Making a custom gui for micro core linux. az i want to make a ditro based on it.
View 8 Replies
View Related
May 23, 2010
If this is a problem exactly with Networking or my Laptop...I have a celron laptop 1.5GHZ with 1.5GB ram and 120GB HDD and I have a Intel 965 chipset I guess...
The problem is I have a desktop with ubuntu 10.04 and My network card...Huwaei runs fine but if I install on my latop with above specs it does not detemine the modem but it determines the micro SD in it...
Is the problem related with laptop or my network card...
If it is my latop then which version of UBUNTU should I run....
View 1 Replies
View Related
Feb 18, 2010
How to install micro soft fonts in F12, mainly arial in openoffice?
View 1 Replies
View Related
Jan 23, 2011
I'm looking for a Micro Distro based on Debian, to install it on a bootable USB stick and to use it as a Thin Client.
View 2 Replies
View Related
Jun 14, 2011
I am using Linux 2.6.18 in an embedded appication.I need to store few data logs (fixed size , say around 1 log = 100 bytes)on a micro SD card.My question is 1. Which filesystem should be there on micro SD card , so that data integrity is preserved.2. Is there any file sytem that provides a diagnostic check , to ensure that the filesytem is healthy.
View 1 Replies
View Related
Dec 30, 2009
How I can install Trend Micro ServerProtect on centos 5.3?
View 3 Replies
View Related
May 1, 2010
I'm using ubuntu karmic 9.10. I used to transfer songs to/from my Creative Zen Micro firmware 1.11.01) using gnomad2 2.9.4 with no problem at all. Suddenly it stopped working. Gnomad2 seems to detect the zen micro but it hangs when "retrieving metadata from jukebox". The zen micro doesn't appear in "places" menu but Inot sure whether this is an issue...when I enter lsusb in a terminal it getsBus 001 Device 004: ID 041e:411e Creative Technology, Ltd Zen Micro
View 6 Replies
View Related
