i have a problem with my 8gb mirco SD card. I have to make an ext3 partition on it, but the system do not even recognize it. I have tried with a 2gb card and everything is working right, so the problem isn't my netbook's card reader (it's a samsung n220).
View 1 Replies
For the last several weeks i've been trying KDE and it's been working quite fine. There are however several minor issues with KDE.
First - how can i format a usb stick? In GNOME after the usb stick has been plugged in one just have to right click on it and select "Format". Here i don't see such an option. I googled it and i read somewhere that the tool for this would be KDE partition manager. I installed it but it looks like an overkill for the task. KDE partition manager is high level tool like GParted, whereas i'm looking for something that integrates into the desktop so i can just right click on the usb drive and select format. Besides KDE partition manager asks for a root password which is logical because it can format all your partitions. However i don't see the need for a root password when one is going to format a usb drive.
Second - i tried to use my micro sd card yesterday and while it mounted automatically i couldn't write anything on it or delete any of the files on it ( didn't have this problem with the usb stick though). How can i change that? I have a default Debian install with a nearly default KDE 4.6.5. In GNOME the SD card was always mounted writable by default.
Third - i am using Iceweasel, Rhythmbox and GIMP which are GTK applications. To make them look OK in KDE i installed gtk2-engines-oxygen and kde-config-gtk-style and i also installed the Oxygen KDE Firefox theme (from here [URL]). I then configured the GTK applications to use the oxygen engine and Rhythmbox and GIMP look perfectly OK (i've attached a screenshot at the bottom of my post) however Iceweasel doesn't look completely OK. The problem is that the color scheme of the window is slightly darker than the color scheme of the upper window border - i've attached screenshots of Rhythmbox and Iceweasel so you can compare. I've tried KDE 4.7 with Arch Linux and Firefox there looks OK just like Rhythmbox. It is a small detail but it bugs me...
Fourth - i have problem with the KDE theme for Firefox which i've installed. Without it Iceweasel doesn't look that good. With it, the find menu (activated with ctrl+f) doesn't work - instead of the regular search field just a very small box appears. I've posted a screenshot for that as well.
i using wine windows windows compatibility layer(beta release) , i tried ride(micro controller and micro prosser simulator)open with wine , but it not work properly..
View 2 Replies View RelatedI have an microsd card reader plugged in with usb. But when i insert my microsd card I can't see it in Dolphin. Do I have to mount it first? and how? and is it possible let it be mounted automaticly when I insert the card?
View 1 Replies View Relatedi have an 8gb sandisk micro sd card that i was having problems with, so i decided to zero it out, problem is now i can't repartition it.i have tried gparted, the disk won't appear, but when it is attached, i can see a /dev/sdb in devices that isn't there otherwise.is it possible to create a new partition table on this, and how?also i am trying to 'sudo mkfs.vfat /dev/sdb' but it is saying
View 5 Replies View RelatedI am trying to read my SD car trough the external car reader but it does not work.A bit of maybe relevant info:it a SD adaptor with a micro SD memory of 1 G.It came from a nokia phone.what I know its working:the micro SD card is working came out my mobile phone the reader is working I have tested with other SD card
the only left is the adaptor but very unlikely.Could some one help to with the command from the terminal to find the SD car drive name, mount it, and formatted?
I am using ubuntu 10.04.My samsung e2120 has external micro sd card of 2GB.When i connect mobile to computer via cable in windows , it works normal as USB mass storage as configured by me in mobile settings.But in case of ubuntu 10.04
Code:
$cp /data/to send/khatarnak shayri.txt /media/E0FD-1813/
cp: cannot create regular file `/media/E0FD-1813/khatarnak shayri.txt': Read-only file system
[code].....
I'm using ubuntu karmic 9.10. I used to transfer songs to/from my Creative Zen Micro firmware 1.11.01) using gnomad2 2.9.4 with no problem at all. Suddenly it stopped working. Gnomad2 seems to detect the zen micro but it hangs when "retrieving metadata from jukebox". The zen micro doesn't appear in "places" menu but Inot sure whether this is an issue...when I enter lsusb in a terminal it getsBus 001 Device 004: ID 041e:411e Creative Technology, Ltd Zen Micro
View 6 Replies View RelatedI have a DELL Vostro 1500 and I have Debian Lenny running on it. I did get the wireless card BCM4312 working but after doing apt-get update followed by apt-get upgrade and after rebooting it stopped working. I am including the output from iwconfig, ifconfig and lsmod.
raygo75@RayGo-d3:~$ sudo ifconfig eth1
[sudo] password for raygo75:
eth1
Link encap:Ethernet HWaddr 00:16:44:9b:e9:cc
inet6 addr: fe80::216:44ff:fe9b:e9cc/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:17 Base address:0xc000
I think I will mentions that I got the wireless card working after following the instructions at [URL]
I have some problems with my WiFi card I'm configuring for Debian Wheezy. I've used it in other computers successfully (It's a USB device), but this box doesn't seem to be able to recognize it or use it properly.
I've identified the card using Code: Select alllsusb with the output Code: Select allBus 001 Device 002: ID 7392:7811 Edimax Technology Co., Ltd EW-7811Un 802.11n Wireless Adapter [Realtek RTL8188CUS]
I've used the Wheezy docs to download the firmware necessary and it apparently is supposed to run fine with this firmware, but nothing is working. There was mention to a GitHub repository of a fixed version of the driver in question, which didn't work either.
Stuck an SD card into my laptop (acer timelinex 5830tg) for the first time today, and to no avail. I've done an lspci, but don't seem to see my card reader there. here's the output
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family HECI Controller #1 (rev 04)
00:1a.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4)
00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b4)
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4)
00:1d.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: nVidia Corporation Device 1050 (rev a1)
02:00.0 Ethernet controller: Atheros Communications AR8151 v2.0 Gigabit Ethernet (rev c0)
03:00.0 Network controller: Atheros Communications Inc. AR9287 Wireless Network Adapter (PCI-Express) (rev 01)
04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5209 (rev 01)
05:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)
I'm running kernel 3.0-rc6. Issue still remains when booting into 2.6.39 also.
I am having some trouble with my sound card, for what I understanded is not detected on my kernel, my kernel is the following: 2.6.26-2-686. I got a Debian Lenny Stable with Xfce4, my sound card comes incorporate with my motherboard that is an Asus P4S800D-X and my sound card is a SoundMaX.
I am sure that the kernel doesn't recognize it because when I put on a terminal: lspci | grep Audio, I don't get nothing. Also when I go on my Xfce task menu to Settings >> Mixer Settings, I just get a default mixer setting with no audio channels or nothing. I got all my alsa drivers intalled too.because I tried to go to www.asus.com homepage (Motherboard Manufacture) and I cannot find the driver of the sound card for linux.Where I can get this driver? Or can I update my kernel with Lenny stable version? if so, let me know what version and what repository to get it. Because before I had a Debian Squeeze testing with the Kernel 2.6.30 and worked fine.
I have a Dell Vostro 1500 that has a Broadcom BCM4312 wireless card installed. I do not have access to a wired connection to the web so any thing I have to install is a download on my windows machine and then transfer that to the debian machine. I just finished installing Debian Squeeze but can not get my wireless card to scan for any networks. I found a tutorial at [URL] and followed the steps there. Finding all the dependances and installing them one by one (took me all day). My wireless card still will not scan for networks. After doing a 'sudo ifconfig eth1 up' it still will not scan for networks.
Output from ifconfig:
raygo75@RayGo-2:~$ sudo ifconfig
eth1
Link encap:Ethernet HWaddr 00:16:44:9b:e9:cc
inet6 addr: fe80::216:44ff:fe9b:e9cc/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:17 Base address:0xc000
lo
Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:28 errors:0 dropped:0 overruns:0 frame:0
TX packets:28 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1900 (1.8 KiB) TX bytes:1900 (1.8 KiB) .....
How do I get around this? It wants to get something from [URL] and I do not have internet access. It looks to me like it just wants to download the wl dirver, again, which I have done in the previous instructions I found. I am a retired UNIX (hp-unix) administrator so I know my way around the system.
I'm having problems getting my wireless network working. The same problem exists in both Debian 5.04 and Ubuntu 8.04. I'm using a Sonet ZEW2500P USB wireless card, which shows up when I look at lsusb. The card works under Windows, so its not a hardware problem.
When I run iwconfig, wlan0 simply doesn't show up on the list. It doesn't go by any other name either. I've tried adding iface wlan0 inet dhcp auto wlan0 to my /etc/network/interfaces file, but to no effect. I've tried using both the rt2000usb driver and the old rt2570 driver, and made sure both are not loaded at the same time using lsmod, but this doesn't help.
I wanted to try the CONFIG_NET_RADIO enable/rebuild kernel technique, but I can't find CONFIG_NET_RADIO anywhere in my autoconf.h file!
I assume someone will want to see a log file of some kind - just let me know which one (and where I can find it).
Anybody know how to get pictures off of one? I've got a computer with XP, but the software doesn't want to work. I've tried setting it up in a VM, but VirtualBox won't patch the camera through for some reason. The SD card adapter it came with stopped working, so that's a no-go.
View 2 Replies View RelatedI just joined this forum in hope of fixing my linksys wireless card, here is my problem. I have a old Compaq presario 1710sb laptop with a p1 32mb ram and a 2GB hard drive. I installed a Debian Lenny command line only install, I installed ndiswrapper from a etch .deb file I found on the internet but I can't find out how to get it working. I tried how tos on other sites but they didn't work, I need to get that card working before I can install a GUI.
View 14 Replies View RelatedI am pretty new to Linux still. I have a desktop I'm trying to set up as a Linux machine. I'm apparently running a testing version of squeeze (I was running lenny I thought too many updates?). Anyway, I've been trying various things all night to try to get my wireless card to work. The system tells me I have a Broadcom BCM4318. When I run dmesg I get this:
[ 496.640869] b43-phy0 ERROR: You must go to [URL] and download the latest firmware (version 4).
[ 619.374662] input: b43-phy0 as /class/input/input25
[ 619.410838] firmware: requesting b43/ucode5.fw
[ 619.416638] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found or load failed.
Over and over. When I head to the website, it tells me to run b43-fwcutter. I've tried installing that and it says it installs fine but nothing ever changes. Everything I've found says that should work so I can't really find any suggestions for what to do if it doesn't.
I have just installed Squeeze on my 5+ year old iBook G4 and it runs quite nicely and quite fast! I am very happy with it overall. Finally I have been able toinstall Debian on a piece of hardware. Dual boot is generally hopeless on Macs. So this is a single boot setup and I am quite happy with it. I have two major issues right now:1. There's something wrong with the sound system. I get the following error message when I clickon the small x to the right of Volume Control (on the upper right corner of my screen). See attached screen shot.
View 3 Replies View RelatedI just installed Debian after I became fed up with Ubuntu. I'm trying to get my wireless card to work so I can move my computer back to it's proper place. Right now I have to put it right next to the router so the Ethernet cable can reach. Anyways, I've had trouble with this card before, so I did a quick google search. I found this: [URL]. I followed the instructions, and the thing at the top of the panel shows a list of wireless networks. When I try to connect to mine, it asks me for authentication. When I give it authentication, it idles for a while before asking me again.
Here's some system information:
uname -a
Linux max-pc 2.6.32-5-amd64 #1 SMP Wed May 18 23:13:22 UTC 2011 x86_64 GNU/Linux
lsmod | grep rt2860sta
rt2860sta 454573 1
crc_ccitt 1323 1 rt2860sta .....
From what I recall, when I used Ubuntu it was called ra0. Could this have something to do with it?
I have recently tried to install Debian 6 on a PowerMac G5 that we had lying around. The system installs fine and will boot to a command line, but when the installation was complete and X tried to start (using the default configuration--which I believe specified the 'nouveau' driver) the screen went completely blank and no amount of button-pushing could get me back to even a tty. I did here the standard noise that gdm3 makes when the login window is ready, so this is solely a display issue. Plus, [Ctrl]-[Alt]-[F1] followed by [Ctrl]-[Alt]-[Delete] did reboot cleanly so the system didn't hang. I booted from the CD into recovery mode and switched the default X driver to vesa (I had to install it), which, I understand, is supposed to work for everyone. However, nothing worked! I did get one step better: the vesa driver brought me back to the terminal when it crashed, instead of the nouveau's bad habit of stopping the display from working completely. I haven't got the full log files because it would be a pain to mail them to a computer with a working web browser (although I will if needed), but I did see the following messages in the output:
(II) VESA(0): initializing int10
( followed by a backtrace )
Bus error at address 0xf79fd000
Fatal server error: Caught signal 7 (Bus error). Server aborting
Is the open source wifi rt2x00 driver in the Debian kernel? I tried to install Debian for the last 2 years, It never detects my edimax card ew-7128g, Can't use something without wifi or internet support, it does not detect during the install. Nor when i am on the desktop.
View 1 Replies View RelatedI am trying to get my Behringer UCA202 USB sound card working on Debian Squeeze. Under lenny I can get the card working perfectly using modprobe snd-usb-audio then alsaconf. On squeeze however, I did the same thing and followed the debian wiki instructions, but while I can view the card to pull up in alsamixer no sound will play and under "item" both dB gains are stuck on 0.0 despite the channels being unmuted and the volume being up.
[Code]...
[EDIT]: I solved this problem by changing the line in /etc/modprobe.d/alsa-base.conf "options snd-usb-audio index=-2" to index=1. I am not sure why that made it work though since I thought that line only changed the priority of using the card.
If i run lspci it shows lan card model, but lan card is not working. How do i check my lan card driver is installed or not?
Is there any way to list all installed drivers with hardware information like we have device manager in windows.
I just got myself a Dell Inspiron 1440. And decided to install my favorite distro Debian. I got the installation to go with no issue and all seems to be working fine. However the wireless isn't working. NetworkManager doesnt even detect a wireless card. I followed the instructions here and installed the b43-fwcutter and then issued the modprobe b43 and modprobe b43legacy commands. Then I issued the iwconfig command and this was the output.
[Code].....
Also, I've been doing some research and found out about some file located /etc/udev/rules.d/70-persistent-net.rules. So I looked in mine and found out that only my eth0 is added.
[Code].....
I had an Ubuntu Server 32 bit installation and everything was working fine. Now that I installed Ubuntu Server 64bit on a new drive in the same machine, the ethernet card is not working!! This is insane cause when I put the hard disk with the 32bit installation back and booting from it, the ethernet card is working without any problems but in the 64bits installation it is not shown at all using "ifconfig -a"
lspci output:
Quote:
02:00.0 Ethernet controller: Atheros Communications AR8151 v1.0 Gigabit Ethernet (rev c0)
How can I check which module is being loaded in the 32bits installation to try to load it manually in the 64 bits installation?
ubuntu 9.10 can't read micro sd? tried to read it using a card reader usb or sort of but it doesn't seem to be recognize... if ubuntu 9.10 can read micro sd using a usb card reader or something, how?
View 5 Replies View RelatedMaking a custom gui for micro core linux. az i want to make a ditro based on it.
View 8 Replies View RelatedHow to install micro soft fonts in F12, mainly arial in openoffice?
View 1 Replies View RelatedI have checked the forums but can't find a topic that covers this. I have an 8Gb Micro SDHC in a micro reader that I installed 10.10 onto from the Alternate DVD. Unfortunately I neglected to set up the swap and home volumes and I now have a stick with all 8GB used up.
I have configured up Ubuntu to my liking and also added some applications. I would prefer not to lose this and I don't appear to be able to adjust the partition table live to now accommodate the swap and home areas.
Is there a way to do it live or can I boot from the DVD again and adjust the one partition to three such as 4 GB root, 2G Swap and 2 Gb Home?
I'm looking for a Micro Distro based on Debian, to install it on a bootable USB stick and to use it as a Thin Client.
View 2 Replies View Related
