Ubuntu :: Mint Won't Boot / Solution For This?
Jan 16, 2011
Yes, I'm using Mint. It's practically the same as Ubuntu, but the Mint forums have much less people. Hear me out.
I'm dualbooting Win7 and Mint 10, each on their own disk. Mint will not boot. It was working fine a couple days ago, but now only Windows is working.
When I tried to boot Mint recovery mode some of the last lines were code...
I think that it could be a GRUB (GRUB 2) problem because when I booted up this morning GRUB did not have the 5-second timeout it was supposed to have. Minor things like this have happened to me in the past � once, by itself, it changed the default boot to memtest, and I had to change it back with the StartUp-Manager.
I would try using the StartUp-Manager or running sudo grub-mkconfig with my live CD, except that my live CD will not boot. The drive seems to be fine, because I just tested it with The Fellowship of the Ring.
The only thing I have changed recently (to my knowledge) is my CMOS battery, yesterday. Windows is working fine, and it can see the drive that Mint is on (meaning the drive IS connected and does exist!).
View 8 Replies
ADVERTISEMENT
Jun 8, 2011
I have a Realtek WN511b wireless card with a BM4321 chip.
It runs on the wl driver but when I boot the system the card won't install.
With help (I am noob) we have figured out that the ssb and the b43 drivers are installing even though I have them blacklisted. I have seen similar problems described elsewhere but no real fixes.
I can boot the system (Dell d630) then pop the card out and re-insert, enter password and it connects no problem.
It would be nice if it simply installed on boot.
Wondering if anyone had a solution?
View 14 Replies
View Related
Jan 28, 2011
I have double boot windows xp and linux mint 10 on a dell desktop. from the start, linux mint would not completely shutdown. the windows xp shuts down completely. i have tried the commands sudo poweroff, sudo telinit 0 and sudo shut down -h now. not one works. i also have updated to the dvd version and is updated on everything else.
i do not know how to go to bios or perform any programming tasks. may i then request that instructions, if any, be detailed?
View 3 Replies
View Related
Feb 6, 2010
So I just installed Karmic onto my netbook that used to have Jaunty on it. As usual I did a system update after the clean install finish. In that update it included a kernal update to 2.6.31.19. As far as I know the update went fine.So when I restarted, after the usual bios screen, it just freezes. Some gibberish comes up and nothing happens. I did a hard reset. Then when bios came up again, I chose boot option, and then clicked to boot from my hard drive. GRUB came up (finally) and I chose the old kernal and it booted fine.
Just for good measure I tried booting from 2.6.31.19 and the same strange freezing thing that I mentioned in paragraph two happened.
View 2 Replies
View Related
Jul 20, 2010
I have a Dell Workstation T3400, dual core 2.6Ghz CPU. Recently I upgraded UBUNTU from 9.10 to 10.04. After the upgrade, it takes long time to boot up. First shows a blinking hyphen, then a screens with options to enter configuration utility appears. Then says GRUB loading but again blinking hyphen stays for almost a minute. Finally, I get the log in screen after about 2 minutes.... I checked some other related posts but could not find any solution that worked for me.
View 2 Replies
View Related
Jun 26, 2010
Windows has some files I need and when I try to boot it hangs at a black screen with a blinking cursor.
I checked grub.cfg and this entry was in there code...
View 9 Replies
View Related
Nov 17, 2010
I just installed Ubuntu on my girlfriends laptop. The install went fine, but after it tried to restart, it wouldn't boot into Ubuntu. I was reading a thread about someone with a similar problem, and replied in that thread as well, but no responses to me yet. One person said to go here and run the script and post the output. I did that, and this is what I got code...
View 9 Replies
View Related
Jun 22, 2010
Windows won't boot on Grub after I just updated Ubuntu. I tried to follow the solutions to other people who have had similar problems, but I can't get them to work for me. I am assuming you will want to see this code...
View 5 Replies
View Related
Dec 26, 2010
I have a Toshiba Satellite A205 laptop 2GB RAM, running Meerkat 32bit. Used 2 previous versions of Ubuntu also.For the past few months, about 75% of the time, on boot up the screen will freeze before I get to the login screen. No key combos (ctrl alt backspace, alt prnt screen, REISUB) work, I have to take out the battery, unplug and restart. It always boots normally the second time, whether I boot normally or attempt repair.I recently installed Linux Mint 10 on dual boot, and the same thing happens with Mint.I connect to the Internet via wireless, not sure if that is significant or not.The problem does not appear immediately after installation, but only after updates and a couple reboots.
View 4 Replies
View Related
Mar 3, 2011
So I ran the update manager to install the latest kernel. It goes fine and was sitting at the restart prompt. I was playing minecraft and the entire system locked up - couldn't restart X or anything. Hard restart and I get a multitude of errors mostly dealing with not being able to find things in /dev/... It gives me a command line but I'm lost as to where to go from here to repair my system
View 2 Replies
View Related
Aug 16, 2009
In F10 the boot sequence hangs just after loading anacron. I booted with interactive mode and after saying 'yes' to starting anacron I'm prompted to start 'local'. When I say yes, my system hangs.
I've seen quite a few posts regarding very similar issues that people were having. None of them seem to have a clear cut solution.
Some posts mentioned about the wrong video drivers, however I've been using the same video drivers for a couple of months now and never experienced this problem.
I looked at /etc/rc.local and all it has in it is 'touch /var/lock/sybsys/local'
I also looked at the file above and there is nothing in it.
Any ideas/solutions? Everything was working just fine the other day. so I'm completely baffled.
View 14 Replies
View Related
Feb 10, 2011
I've decided to install Fedora 14 on my Late 2008 Macbook Pro (model 5,1), but when attempting to boot from the live cd, all I get is the main boot menu, then I briefly get a grey screen with a blinking white cursor, then the screen just goes black. The computer is still running, and I can still hear the cd drive, but I have no video. I've seen the tutorials for installing Fedora 14 on a 5,1 macbook pro, and I know it's been done successfully with no mention of such issues.
View 5 Replies
View Related
Jan 14, 2010
I had Win7 installed on my Laptop and wanted to set up a triple boot with Fedora 12 and Mint 8.So I installed Fedora 12 and it worked loading grub and offering Win7 and Fedora as choices.Then I installed Mint hoping for the Grub2 to recognise Fedora and set up the triple boot but it didn't and I can now only boot into Win7 or Mint.sudo update-grub doesn't help.How can I configure grub2 to offer me all three OSs?
View 1 Replies
View Related
Dec 22, 2010
Recently installed Mint (Julia) alongside Ubuntu Remix and I want to uninstall UNR completely and re-install.
View 2 Replies
View Related
Dec 13, 2009
Let me start off with the usual: I'm a linux newbie but am doing pretty good so far with google by my side. I've come across a problem I cant seem to find an answer to:
I just got a CyberPower 685 AVR UPS. I Installed their power panel software and it works great in CentOS 5.4. When I reboot, the system hangs right after the "Red Hat Nash 5.6..... Starting" message. I've left it for 20 mins so far and it's still hanging. If I unplug the USB data/shutdown cable, within about 10 seconds it starts detecting hard drives and continues booting...
Ive even returned the UPS for another to see if it was bad, and it still is giving me problems.
View 5 Replies
View Related
Dec 21, 2009
I'm experiencing some rather severe problems after updating my Centos 5.4 system (Virtual Xen guest). What happens is that when the system boots it complains about missing .so files which prevents about 50% of the services installed from running.
I'm suspecting that it has something to do with selinux for two reasons: 1. The first services to go down complains about the security context of some files, and 2. selinux was kinda the reason I decided to update in the first place as it was disabled when it shouldn't be (enabled in system-config-securitylevel, disabled when running sestatus).
The whole boot-sequence ends with alot of "INIT: Id 'X' respawning too fast: disabled for 5 minutes"-messages (including all runlevels) before it goes stale, and I can do nothing.
The server in question had undergone very little tinkering from my part, pretty much none at all, the only services installed after installation was apache, mysql and webmin.
Details:
CentOS 5.4 is installed on both the host and guest.
The guest runs on an lvm-partition.
I have two other vm's(also CentOS) running just fine, altough I'm a bit weary of updating them .
Attached are some screenshots of the boot-process.
I hope some one here can share some insight on this problem. It's making me pretty nervous seeing that our whole network is run by CentOS-installations (not that I'm certain that CentOS is the culprit).
View 3 Replies
View Related
Mar 1, 2010
I have a very infuriating problem. I recently got a new computer and I wanted to put Mint 8 on it (as I already use it on my laptop). I tried to boot the live cd and the screen displayed the ISOLINUX version and then just went blank. After a few attempts I gave up and put in a Fedora 12 live cd I had lying around and it booted and installed without a problem. I really would prefer Mint to Fedora but it still refuses to boot from the Mint live cd. Is there any way I could install Mint from within Fedora? I want to use Fedora's partition for Mint.
View 9 Replies
View Related
Feb 15, 2011
I am very much new to Debian. To have a feel and check if my laptop (HP Elitebook 6930p) is supported I decided to use a live USB option. I know how to create a live USB disk using Ubuntu and using the same knowledge I created the USB disk and tried to boot using it. The system starts to boots off the USB drive and then is stuck at a point where it fails to identify my HDD. Here is what I did
a) downloaded the debian-live-508-i386-gnome-desktop.iso/debian-live-508-i386-gnome-desktop.img/debian-live-507-i386.iso (I tried with all 3)
b) created a live USB using unetbootin
c) tried to boot from live environment
My laptop's hard drive is encrypted using SafeBoot.
After all the 3 debian images failed to boot I tried with other Linux flavors such as Mint and Ubuntu. Interestingly Mint and Ubuntu boot. Is there some thing I need to take care of?
View 3 Replies
View Related
May 10, 2010
I admit that I am a noob - knows a little which makes it more dangerous than not knowing at all. in brief, I am unable to boot one of the OS out of 3 I have installed. Everything is fresh install on newly formatted partitions.
Here are the details:Two HDs - one is Sata and second is IDE. Win7 installed on IDE (sdb2) then Ubuntu 9.10 on Sata (sda2) and lastly Linux Mint on Sata (sda3). Everyone was on its place - that is - Ubuntu 9.10 on sda2, Linux-Mint on sda3 and Win7 on sdb2.
Future of the day was bright and promising until I upgraded online to 10.04. After that, I was only able to boot to Win7 (IDE drive - sdb2 - not sure if it changed at that point or not) but no nix OS on Sata sda2 & sda3. I downloaded 10.04 and installed from CD again on sda2. Well, now I am able to boot into Win7 and Ubuntu 10.04 but no Linux-Mint. Another interesting thing is that sda and sdb have interchanged/swapped. So now if I chcek it thru gparted or run boot script, Sata drive shows up as sdb and IDE is now sda. In another post, I read that grub2 does that and make IDE drive as the first drive and Sata drive as second. Well, I buy that but why I am unable to boot to second OS on the same Sata drive? Evidently, I am missing something and I take that it is mostly user error but please
[Code]...
View 8 Replies
View Related
Nov 12, 2010
I have a dual boot ( Ubuntu 10.04 and Linux Mint), but I spend most of my time in the Ubuntu 10.04 partition. The point is that I have a huge files in the Mint compartment and I would like to gain access to those files from my Ubuntu 10.04 partition. I have tried samba and could not get the file sharing system to work. I had used samba when I was dual booting between Ubuntu and Windows and it worked but not in my present Linux dual boot.
View 4 Replies
View Related
Sep 25, 2009
My hard disk is a 40 gb seagate drive with 3 logical partitions - C (Win 98), D (Data), E (Win XP Home). Yesterday, I decided to format Win 98 partition and install Fedora 11 on it. I used Live USB, custom partitioned for /, /boot and swap. Installation went fine until the Add/Delete boot screen came when I got multiple Unable to mount partition errors. Then I added Win XP (which was on sda6) and restarted the system. When the system booted, I selected Win XP but it didn't do anything. It showed blank screen and then reverted to grub boot loader screen. Then I selected Fedora time and completed installation and it works fine but XP doesn't boot.
Thinking something might have gone wrong, today I reinstalled Fedora. I chose "Install over previous Linux" and this time the installation went smoothly without any errors. However it still doesn't let me boot into Win XP. It gives a "Booting into WinXP in 3/2/1 seconds" and then goes blank and keeps repeating that message.
This is the result of fdisk -l code...
View 8 Replies
View Related
Apr 23, 2011
I am having a Lenovo Thinkpad SL400c laptop running on c2d (64 bit) processor. The problem is, Linux Mint doesn't boot in this laptop but boots well in other laptops( I tried it in dell inspiron and compaq ones)and desktop. I tried all versions (from Linux mint 7 till 10 and both 32 and 64 bit versions). What actually happens is that, the BIOS loads the CD (doesn't even asks "press any key to boot from CD" as it asks for Windows) and abruptly results in a blank screen. It remains blank even for hours. But Opensuse, Ubuntu, and even open solaris all run fine on this system. Don't know why it resists only Linux mint.
View 1 Replies
View Related
Apr 19, 2010
I'm new to the world of Linux, but am intrigued by the variety and functionality it offers over Windows. I have an external HDD from which I would like to dual boot Linux Mint, with Windows Vista (64 Bit) remaining on the primary internal HDD. I know that my BIOS supports dual booting and booting from USB devices (my external HDD). Are there any specific dangers I need to be aware of? Is it as simple as putting in the installation disc and selecting my external HDD?
View 9 Replies
View Related
Mar 3, 2010
have my workstation dual-booting Mint 7 and Windows 7. I had no problems installing either OS. But now I need to run some software that just won't run on Win7, not even in compatibility mode. So I have to use XP. So I installed XP Pro on a 1TB drive connected by eSATA. Again, no problems with the install, smooth and easy. BUT, and I'm sure you know where I'm going with this, XP jacked up the booting. I lost the grub menu, of course, and I had a hell of a time getting my system back to where I started. I removed the eSATA disk (with XP on it) but could not use the standard grub fix (find /boot/grub/stage1, root(hd0), etc, etc.). I used the Win7 repair utility and that restored my ability to boot into Win7. I then was able to use the grub fix and was back to square one.
I tried adding XP to the menu.lst (using the correct hd address and all) but when I selected XP from the grub menu it said BOOTMGR was missing. I'm assuming Win7 wiped it out when I ran the win7 repair utility.So, does anyone have any idea how I can "easily" boot XP from the eSATA disk? I've searched the forums here and I think my scenario is a bit different than other tri-bootonfigurations.I can't install the drive in the workstation because there are no more slots left for an HD to fit. So it has to be eSATA.
View 4 Replies
View Related
Apr 3, 2010
I have Microsoft Windows Xp installed on my Primary Drive C: and I had a Mint boot disc that I would pop in and load from. Well I got tired of this disc and installed a new hard drive in my computer so I could use Mint as a secondary OS. Everything went good in the install, and I put Mint on the second drive. But when I boot my computer the GRUB menu only shows Linux Helena Mint 8 to load from and no Xp. Xp is still currently installed on the computer in the Primary drive, but how do I inlcude it in the GRUB boot menu or boot it at all?
View 2 Replies
View Related
Jun 28, 2010
Recently, my Mint update informed me it had an upgraded kernel version of Mint 9 and asked did I want to upgrade. Me, not being an old hand at things Linux, upgraded. Instead of overwriting the older version, it put the upgraded version of Mint 9 BESIDE the older one. So now I have, actually, 4 versions of Mint 9 on my PC,(generic plus recovery mode for each) which is dual booted with Vista Home Premium.
I don't want this. I have had weird problems and hiccups since I upgraded. I want to get rid of the newer kernel version and use only the older one. How do I uninstall the upgraded version of Mint 9? I have tried to boot into the older version, but there is no desktop and I have to type on the boot screen and in the terminal. It wants commands I don't know how to give. How do I restore my older version of Mint 9?
I just want one version on my PC in the dual boot with Windows Vista. Can someone tell me how to accomplish this? If you give me terminal commands, please make sure they are copy and paste ready. lol.
If uninstalling involves deleting partitions and doing a manual partitioning and formatting, I'll need easy instructions for that also.
View 5 Replies
View Related
Dec 23, 2010
i have tried to install linux mint 10 and archlinux. i keep getting the same error. error_code+0x73/0x78 note: udevd[904 exited with preempt_count 1 i hve ran memtest86+ on both and checked cd!
View 5 Replies
View Related
Mar 9, 2010
I got to the part where I'm supposed to partition Mint. I've got a 500GB hard drive, and I thought I'd give 300GB to LM--but I'm unclear about using ext2, 3 or 4. What about the swap file? Is that automatic?
View 10 Replies
View Related
Sep 28, 2009
I recently installed Fedora 11 onto my computer on top of Linux Mint. Originally I was using Mint's bootloader, but I'm ditching Mint soon for another OS so I'm migrating to Fedora's bootloader to make the transition easier. For a while I couldn't get Mint to appear on Fedora's Grub menu, but during that time I could still access the internet on Fedora. However, once I successfully added Mint to Fedora's grub menu, the wireless suddenly stopped working on Fedora (though it still works on Mint.) I can connect to the network on Fedora but it gives me the awesome "host does not exist" message when I try to ping anything. Any insight as to why this might have happened after I managed to successfully boot Mint from the Fedora boot menu?
View 5 Replies
View Related
Dec 6, 2010
with the help of others (to whom grateful thanks), I've managed to get this distro installed and my PCMCIA Wireless card working without a LAN connection!Result......well it was for me!next big prob is sound.......any sound at all!This command sudo modprobe snd-cs4236 sometimes gives me some, just for the current session, if it don't want to play, it just ignores me!Two main questions,
1) How do I get the attention of the "Alsa Mixer"? (the GUI is normally just blank and may or may not be activated by the above command!)
2) Once I have the attention of the "Alsa mixer", how do I maintain it upon re-boot?
Some one guided me to this post and despite it's age, I appended my plea for help....but I fear it is not the correct place............I just hope I'm now in the right place.url
View 14 Replies
View Related
