Windows won't boot on Grub after I just updated Ubuntu. I tried to follow the solutions to other people who have had similar problems, but I can't get them to work for me. I am assuming you will want to see this code...
View 5 RepliesWindows has some files I need and when I try to boot it hangs at a black screen with a blinking cursor.
I checked grub.cfg and this entry was in there code...
I have just installed 9.10 on an old Dell C610 laptop as I had to install a new hard drive and didn't have the old XP licence number or COA!
Anyway, the Ubuntu install all seemed to go ok but I'm having a major problem with the display not following what I'm doing and not updating as windows are opened and closed. Am I likely to be doing something silly or have I got a hardware conflict somewhere. Where should I start?
I have a problem. Today I updated from 10.10 to 11.04 and it looks really cool. However, I also have Windows 7 on a different partition. When I restarted after I updated, GRUB looked different. Also, when I tried to boot to Windows 7, the screen would go blank (like it was restarting) and it would just bring me up to the GRUB menu again. I really need to get back onto Windows 7.
View 7 Replies View RelatedI was updating slackware-current via slackpkg and while it was downloading/installing latest kernel (and other apps) my battery went off and now the system can't boot. I was thinking to boot through a live cd and through chroot command to re-install all the new packages. Would it work?
View 6 Replies View RelatedI have always used apt-get to update the system. Yesterday, I was doing some tests and one of them was to try to update the system using the aptitude command, instead. I ran aptitude update and then aptitude safe-ugrade. I thought that wouldn't be a problem, but I was wrong. This morning I found the computer just can't boot.
I get this message:
I have Squeeze in another partition on that computer. I can access the system through the terminal (the graphic is screwed). Is it possible to try my Lenny from this partition? If not, I also have a live cd for Squeeze. Right now I'm on another computer.
linux and windows dual boot.
Dell desktop (older)
openSUSE 11.2
Windows XP
Grub Bootloader
I had XP installed first then i installed openSUSE and configured for dual boot. What do I have to do to reinstall windows? Can i just do it like i normally would and just make sure it installs on the correct partition and doesn't do anything to the others. I don't want it to screw up the bootloader or something else.
I am running Fedora F14 on an Intel I3 cpu w/4Gb memory and plenty of disk. I have two displays connected to the Gigabyte Motherboard, one of the HDMI connector, and one on a DVI connector. I run Gnome. When Compiz is enabled things work fine for a while, meaning hours or days. Then the displays will "freeze" to the point where the clock stops updating. The system itself is still running programs, services, and the mouse and keyboard work. The mouse cursor will move around, but nothing can be clicked upon. If a terminal was the open window, typing on the keyboard does not do anything, nor does ctrl-backspace or whatever it is to terminate X windows. The keyboard does allow me to press ctrl-alt-F2 to switch to one of the base consoles. Once there I can type to my hearts content. I can kill off my logged in Gnome session through the console, and I can shutdown the system in a controlled manner.
It is as if all of the windows stop updating. For example, I play music through Amarok. An hour after I stop using the system but letting the music play the screens will do their lockup. The clock will stop, and Amarok will stop updating which song it is playing. It continues to play each song in the playlist, but the Amarok window shows what was playing at the time that the clock stopped. I've also had this happen to me while using Yumex, where it would stop updating the screen while installing programs, but the programs do get installed. With Compiz off I don't have this problem.
The version of Compiz I am using is currently 0.8.6-3. It is running on Gnome 2.32.0-2, with a Linux kernel of 2.6.35.9-64. It has happened with earlier versions of these programs. I am using the graphics processing the Intel i3 chip to the motherboard connectors. The freeze generally happens at some random time while I am not actively using the system. It has happened to me while doing simple things like programming through an IDE. The really strange thing to me is that the cursor will move around on the screen after everything else stops updating.
I have a jpeg file on my Windows system that won't delete. However, when I try to boot into safe mode to delete it, I can not get into the menu to select "Safe Mode". F8 just boots me right into Ubuntu.I have Windows 7 and Ubuntu 10.10 on an Acer Aspire 5520.
View 3 Replies View RelatedThe problem is this: I have a 320gb HDD splitted in 4 partitions. When I first installed Windows XP I formatted the HDD in 3 (Windows system partition, Media partition and another one I left for Linux). However Linux requires another partition for swap. Everything was just fine. One day Windows stopped working and I tried re-installing it. After the system was ready to start, Windows failed to boot with "NTLDR is missing" message. I tried to recover the Master boot record, even replaced NTLDR manually - nothing worked. I read that in order a HDD to be partitioned in more than 3 parts the so called "extended" partitions must be created. I think this may cause the problem but I don't want to wipe out everything (I have more than 100 GB of books most of which are not available anymore in the same locations I have downloaded them)
View 1 Replies View RelatedI am a new user for ubuntu, recently i have updated to 11.04 version last week. When i kept my desktop idle for long time, the system goes down and it didn't wake up at all. I didnt change in the setting for screen saver and power management still. It is system default.
I didnt face this problem when i use version 10. Only the new version i am facing this.
Any solution for this?
I recently re-installed ubuntu to fix my freezing problem, but with no success. disc has no errors. I cleaned the disc and the cd drive, the cd burner has a problem installing while the dvd drive does fine. The computer is a HP Visualize X-class workstation with dual 1000mhz pentium 3s, 2 gigs ecc ram and a ATI AllinWonder 9700 pro @ 2x agp(wish was higher), on-board sound. So my problems are:
1) It randomly freezes within 24 hours regardless of who is logged in or if effects are on or what the load is. mouse is frozen too, completely unresponsive even ctrl alt f1.
2) My sound is screwy. its supported by alsa but i have to play with the volume to get sound and lots of times there are audio errors, it sounds like its robo-trippin. I have tried the sound guide.
3) Desktop effects only work with the user that logs in first. If I try to activate them when I switch users it searches for drivers then says it cant be enabled. not a priority.
Window xp works okay but the graphics drivers are giving me problems so i decide to do a dual boot.
I think I am going to put in a different video card. maybe its not all there, it got hot once when the fan died, put in a replacement and it worked but i see lines moving down the screen when there are blacks.
I've recently installed 10.04 LTS on a desktop PC so I can use it as a Zabbix monitoring machine.
I fresh installed and all seemed to be well but after a few restarts the system suddenly refused to boot anymore. The BIOS splash screen comes up and then a cursor blinks on the screen for a couple of seconds and then... nothing. The keyboard and monitor both go unresponsive and nothing happens.
I can hear the HD spin up and it isn't making any weird noises. Also, booting from the CD works and I can see and work with the HD so I'm not convinced that this is the problem.
In fact, I actually did a fresh reinstallation of 10.4 onto the machine and started from scratch. Again it ran fine for a few hours while I was setting Zabbix up. After a couple of restarts, again the freeze on boot.
I ran a HD scan and everything seems fine. I've also switched the HD over to the second IDE connection in the box just in case...
Does anyone else have this problem? Is it a bug? Any ideas on how to workaround it? (Short of going back to a previous Ubuntu version)
I installed Windows 7, then Ubuntu 11.04, but GRUB can't seem to see my Windows partition.
I ran 'update-grub' but it didn't seem to find Windows.
Other forums seem to suggest editing /boot/grub/menu.lst but I can't even find that file.
Here is the info I get from the 'boot_info_script' code...
I have been trying to use Tecplot (a plotting graphical package) on a remote server through X. After using it for a while (10 - 20 mins) my laptop freezes. However I can still move my mouse but cant do anything else but force restart which is bad.
View 1 Replies View RelatedWindows 7 computer can't see ubuntu 10.04 computer. Ubuntu machine can see and access rest of windows network including a linux enabled PVR. Tried various things to no avail.When setting up for shared folders I got a message that I needed to install shared services. I did this but I only have one share through option: Unix networks (NFS). The samba option, which I should be using is not available. I tried to allow "Share files over the network" but had to install some extra service. While "share files over the network" can and has been enabled, accessing the windows network has become painfully slow and my windows 7 machine still can't see the linux box
View 1 Replies View RelatedI just reinstalled Ubuntu 10.04 (I was running it wubi but various issues prompted me to install it in a separate partition) and now windows isn't an option in the GRUB. I have windows Vista on /dev/sda2 and I can see it on GParted.
I tried looking through some of the other posts, but I think that I need some direct help with this one. I have tried update-grub and nothing changed.
I don't use Windows often, but it is nice to have the option.
All this is running on a Toshiba Saellite A215
Macbook air as local in-hands computer, connected at home over 802.11G->Verizon FIOS 15mbit down/5mbit up fiber. Also sometimes from other connections fast (university) and slow (hotels etc).Dell poweredge 750 server remotely wired GbE through 25mbit down 15mbit up fiber
So far I've tried to just ssh -X poweredge and run X apps, redirecting them to my local X server on Mac OS X. This worked great from my university's connection (over wifi) but worked poorly at home. Apparantly X protocol is very sensitive to latency.. windows wouldn't accept button presses for instance, would have to click many times. I've heard there are X settings and SSH settings I can use to decrease latency - does anyone know more about these??? As far as security, all I actually care about is encrypting my pw as I log in. It's not a sensitive situation. I suppose a solution would be to set DISPLAY on the Linux box to my IP and port except that it often changes and I'm always behind firewalls (some that I can put holes in like home, some I can't like school)I've also tried VNC which works "ok"
When using windows, which I haven't tried yet, are my options to remote desktop over SSH and VNC over ssh (run VNC server on XP) - or are there any more? What's likely to work best?Looking for an answer to tweaking the latency and also any completely fresh ideas or suggestions of tools that may be better suited to this situation
I'm trying to install ubuntu on d partition i deleted, which now is "free space" but its giving me that error
So im guessing i have to click on add, what do what i click on? primary? beginning? end? ext 4 im guesing and which mount point?
Im installing it on d portition which i deleted and is now free space, i have windows 7 on c.
I have been using various operating systems on this computer.
At the moment I am using AntiX Mepis. I switched to Linux because my Windows used to freeze all of a sudden after a few hourse or even minutes.
Now my Linux was quite stable for a few days but again, it freezes in a few minutes when I use a Window Manager. In the terminal without using any Window Manager it never freezes.
Can anyone tell me the solution to this? code...
I have double boot windows xp and linux mint 10 on a dell desktop. from the start, linux mint would not completely shutdown. the windows xp shuts down completely. i have tried the commands sudo poweroff, sudo telinit 0 and sudo shut down -h now. not one works. i also have updated to the dvd version and is updated on everything else.
i do not know how to go to bios or perform any programming tasks. may i then request that instructions, if any, be detailed?
So I just installed Karmic onto my netbook that used to have Jaunty on it. As usual I did a system update after the clean install finish. In that update it included a kernal update to 2.6.31.19. As far as I know the update went fine.So when I restarted, after the usual bios screen, it just freezes. Some gibberish comes up and nothing happens. I did a hard reset. Then when bios came up again, I chose boot option, and then clicked to boot from my hard drive. GRUB came up (finally) and I chose the old kernal and it booted fine.
Just for good measure I tried booting from 2.6.31.19 and the same strange freezing thing that I mentioned in paragraph two happened.
I have a Dell Workstation T3400, dual core 2.6Ghz CPU. Recently I upgraded UBUNTU from 9.10 to 10.04. After the upgrade, it takes long time to boot up. First shows a blinking hyphen, then a screens with options to enter configuration utility appears. Then says GRUB loading but again blinking hyphen stays for almost a minute. Finally, I get the log in screen after about 2 minutes.... I checked some other related posts but could not find any solution that worked for me.
View 2 Replies View RelatedYes, I'm using Mint. It's practically the same as Ubuntu, but the Mint forums have much less people. Hear me out.
I'm dualbooting Win7 and Mint 10, each on their own disk. Mint will not boot. It was working fine a couple days ago, but now only Windows is working.
When I tried to boot Mint recovery mode some of the last lines were code...
I think that it could be a GRUB (GRUB 2) problem because when I booted up this morning GRUB did not have the 5-second timeout it was supposed to have. Minor things like this have happened to me in the past � once, by itself, it changed the default boot to memtest, and I had to change it back with the StartUp-Manager.
I would try using the StartUp-Manager or running sudo grub-mkconfig with my live CD, except that my live CD will not boot. The drive seems to be fine, because I just tested it with The Fellowship of the Ring.
The only thing I have changed recently (to my knowledge) is my CMOS battery, yesterday. Windows is working fine, and it can see the drive that Mint is on (meaning the drive IS connected and does exist!).
I don't use Windows that often but thought since I have a copy of Win7 I might upgrade from the XP I'm currently using. I'm anticipating several issues, first Grub, can I get it going again after the Win7 upgrade without messing with my current Ubuntu install? the next issue is Win7 will want to make a "boot" partition, does this create any problem with partition names for Ubuntu? can this be solved by making the windows "primary" partition and using an extended partition inside that? is there anything I'm missing?
View 9 Replies View RelatedI installed Ubuntu for net book 10.10 with partition from USB port. after installation, I cannot find my windows files. The system is not showing me options to boot from windows 7 at the start up. How can I get my files please.
View 9 Replies View RelatedI had Ubuntu/Windows 7 dual boot. I decided not to use Windows anymore, so I deleted it's partition (using Gparted) and formatted it to ext4. Then I did update of grub.Here are few issues I am having now:
1. The new partition won't automount
2. I can not use new partition. It has only one directory - lost and found. I can't copy data there.
3. Grub still has Windows 7 option (it doesn't work of course)
4. Grub fails to boot (it says it didn't find /windows partition), so I have to always skip that manually
According to gparted I have a few unallocated partition. How do I make use of them? If create a new partition should i use ntfs format or ext3 format? If I use one type, the other OS cannot read the other.
View 8 Replies View RelatedI am mainly a Windows admin, but I do *NIX administration from time to time, for now I need to use an open source solution for backup windows environment mainly, I spent last days playing with bacula and backupPC, and I then chose backupPC, I built a solution with it seems working not bad, but before i go on deeper, I thought asking geeks here better, my main experience with back was with Vertias/Symantec Backup Exec, what do you recommend as most similar backup solution in Ubuntu offer a close level (I don't backup to tapes I back to hard disks), also a gui is preferred, while backupPC do a nice work and i handled its client config file (machine_name.pl), but I still do mistakes sometimes and troubleshooting is annoying, I have to backup files from users machines some of these files are running (like PST files), and I could need to backup a database or something from time to time. so whats your opinion all?
View 2 Replies View RelatedI just installed Ubuntu on my girlfriends laptop. The install went fine, but after it tried to restart, it wouldn't boot into Ubuntu. I was reading a thread about someone with a similar problem, and replied in that thread as well, but no responses to me yet. One person said to go here and run the script and post the output. I did that, and this is what I got code...
View 9 Replies View Related