Ubuntu Security :: Ecryptfs Doesn't Auto-decrypt With Auto-login
Jan 6, 2011
I recently installed 32bit maverick and wanted to make it login automatically. I tried enabling auto login from Admin > Login but that didnt work and I was still prompted for my password. Then I went to Users & Groups and changed the password option to Do Not ask for password at login now after I reboot, the user list is shown (only 1 user) and it doesnt ask for password after I click on my username.
However, then it gives a few errors (as i vaguely recall):
1. cannot load .ICE directory in my home directory
2. some error 256 about a gconf-sanity-2 file
3. nautilus cannot load my home directory etc
and then it gets stuck without loading anything (blank wallpaper). i ve tried navigating to my home directory using Alt F2, gksudo nautilus and my home dir contents are encrypted by the ecryptfs (there is a readme.txt file and a shortcut). i have tried to decrypt but it doesnt work... i ve also tried to start/stop gdm, and startx but nothing works. if i stop gdm, then the prompt doesnt recognize my password and keeps on rejecting the commands i enter... I think this has something to do with the home dir not being decrypted due to the dont ask for paswd option... how can i disable the dont ask for pwd without the gui (i can access my / by booting through an external usb).
View 4 Replies
ADVERTISEMENT
Feb 3, 2011
I have noticed that a common issue to several distros is the fact that the networking subsystem doesn't automatically detect the link if an ethernet connection is disconnected and then re-connected to the NIC after boot. If the ethernet cable is connected after the system is up and running, nothing happens - ethtool eth0 shows link detected: no, and you have to restart the network service to let the NIC know that there is in fact a link, and actually connect. I have a Fedora14 (KDE) box with a brand new Asus motherboard with embedded NIC. Everything works great except the auto-detect of a freshly connected ethernet connection if the link is down to begin with.
Am I missing a ethernet link sentinel utility or something, or is this just the way linux works? I have done plenty of research on plenty of posts, and it seems this is a common problem, with no solution other than manually or programatically restarting the network service in a script to detect the link after a disconnect.
View 3 Replies
View Related
Jun 3, 2010
I press On-button, Debian boots, logs in and automatically connects to the Wireless network AND! to my local pc via LAN. It runs an ssh server, so I can ssh into debian over internet and communicate with the local pc (send a magic packet).Here are my problems:
1) I don't how to log in automatically. This and this doesn't work.
2) I need a network tool that can manage multiple connections and has a reconnect feature. With the default network manager I cannot even connect to more than one network simultaneously although I have two network devices of course.
And I guess I can run all that in console mode, right?
View 10 Replies
View Related
May 30, 2010
I have an ecryptfs partition on a usb drive, system runs Debian squeezeWhat I'd like to have is that when I connect the drive it will be auto. mounted and I'lleither have to enter the passphrase or it will already be in the keyring (even better).It seems ecryptfs can auto-mount a directory but I want to auto-mount an entire encryptd partition. Is this possible?.Also, can I have another encrypted directory, say ~/Private, at the same time or can ecryptfs handle only one at a time?
View 3 Replies
View Related
Jan 22, 2011
I have tried everything to disable automatic login from the login screen (gdm). I've changed my password, I've changed the settings in System -> Admin ->Login Screen, and I've edited /etc/gdm/custom.conf (gdm.conf doesn't exist, but I created it just in case!).No auto login is set up, but I can't get it to ask for my password. This is affecting my ability to switch sessions, as I can't switch sessions without clicking on my name in gdm, and because it's set to auto login,
View 4 Replies
View Related
Mar 4, 2010
I'm trying to configure an autologin account for a kiosk. I can create the user, no problem. I can set the user to automatically log in, no problem. I can set a delay in the automatic login so that someone is given a chance to log in using their own account, no problem. But if the autologin user logs out, then gdm does not automatically log it back in. This is where I'm stumbling. It seems that for such kiosk uses like this such behaviour would be a bug and not a feature.
View 4 Replies
View Related
Jun 1, 2011
i have setup auto ssh login for my server. And it works, but only when i have a active connection. if i use "ssh server.com" it asks for my password. If i then open a new terminal and issue "ssh server.com" it logs right in. I really don*t understand whats wrong.
I have tried setting up 2 virtual machines on my local computer and with the same setup it works fine.
SOLVED: my home folder was encrypted, so when no users were logged in the home folder was unmounted
View 2 Replies
View Related
Mar 16, 2010
I would like to exec a script whenever a user mount a device. The device could be an internal device (for example a partition on a second hard disk) or a removable one (for example a usb hard disk). The script must have sudo capabilities even if the user is not included in the admin group. Is it possible?
The specific question:
I would like to add acl option to a device whenever it is mounted.
I tried fstab but it's changing the behaviour of nautilus see:
[URL]... so I would like to create a script with the command
Code:
sudo mount -o remount,acl /media/data
and auto execute it any time data is mounted.
View 1 Replies
View Related
Feb 20, 2010
Does anyone know if there's a way to make nano support auto-complete and auto-bracket closing?
View 1 Replies
View Related
Apr 22, 2011
I code primarily in jQuery/JavaScript, and I'm looking for a text editor for Linux that has auto-indent and auto-outdent (seems to be tough to find that). Any suggestions? I've checked Gedit, Cream, vim, Bluefish.None of them seem to have this feature.
View 2 Replies
View Related
Jul 23, 2010
I recently installed a server with Software RAID. I tested by powering it down, unplugging one drive and powering it up. Magically, it worked!I found out later that I have to manually add individual devices like md1 to sda2 md2 to sda4. I got all of them added and rebuilt but my question is: Is there a way to make it so that if I "removed" a drive and put it back, the system will senses the new drive and rebuilds based on some internal table?
View 1 Replies
View Related
Feb 22, 2010
I have program that work like Fedora Firstboot it's run only one time after finish installation. I have two questions to ask.
1. How can I start this application before gdm start (login screen or auto login)
2. How can I start this application in fix display resolution (800x600)
My method now is
(This is a part of script , this script execute from /etc/init.d/myfirstboot , I create symlink to /etc/rc2.d/S1myfirstboot for start it before anything)
gdm-stop # first time I use /etc/init.d/gdm stop
DISPLAY=:1
export DISPLAY
/usr/bin/Xorg :1 &
[Code]...
I don't understand why first time firstboot start the system will auto loging in but not complete yet and then my script is start and it's work does not fine I think that is another user is already login , but if I re run my firstboot again and again (by setting something that can revoke my firstboot and restart) it's work before auto login and every things is ok!
View 3 Replies
View Related
May 16, 2010
Ubuntu install offers the option of automatically logging one in at startup.If you choose this option, you are logged in automatically. However, you are still asked for your password, to unlock your keyring. So all you have done, is saved yourself one click (or one key press of the enter-key).The downside, is that there is no delay of your automatically started programs that maybe wait for you to log in. These can start using improperly initialized resources - like the keyring, I suppose.
In my case, this has resulted in the sound system failing. Restart then resulted in the sound being restored but the Trash folder going missing and so on. Finally, the Quit button on the task bar vanished forever. Perhaps I have identified the cause incorrectly, but that is my assessment and therefore I recommend not to use this login option.I am running 10.4 Gnome 64 bit. The program I started automatically, was Evolution.
View 5 Replies
View Related
Aug 29, 2010
I was going through some settings and inadvertently changed the UID for my primary logon. I then realized what I did and changed it back and set the group back to my username.Since then, it only auto-logs in on startup. I cannot get it to prompt for a password again. I've tried normal things like changing "ask for password on login" and then changing it back, but that hasn't helped. I'm sure there's something else that I'm missing, but don't know what it is. Right now, it says "asked on login" but it doesn't.
View 4 Replies
View Related
Sep 14, 2010
have a question about auto-login scripts for SSH where RSA keypair authentication is used.Basically, I have a server (say, server1) configured with RSA keypair authentication. This server is connected to another server (server2), that I connect to via server1 and for which I use the same passphrase and public key as I use for server1. I was wondering if it is possible without writing out the passphrase in a file to "forward" the phrase on from server1 to server2 in an auto-login script, saving me having to type it in twice
View 5 Replies
View Related
Nov 8, 2010
How to setup Lubuntu through openbox auto login?
View 2 Replies
View Related
Apr 6, 2011
how do I switch from auto logging in to the menu?I want to make this change via a terminal. ( I know how to do it from the gui )
View 3 Replies
View Related
Apr 19, 2011
i have a script need to auto run before login. i have tried to add it in /etc/rc.local and using update-rc.d, both failed.
/etc/rc.local
has update link from dash to bash
#! /bin/sh
[code]...
View 2 Replies
View Related
Jan 18, 2010
Meaning when I turn on the computer, it automatically logs into the family account; and they never need to enter any passwords.Second, under System -> Administration -> Users and Groups (users-admin from terminal) there is a "Don't ask for password on login" option (toggle) which is desirable for this family account. However, I have never seen this option enabled, but always grayed out. Is there any way to enable this option?In short, I want:1) For the family account never to require a password on login.2) Automatically log into the family account on boot.
View 2 Replies
View Related
Mar 4, 2010
I enabled auto-login on my netbook without considering that my /home partition is encrypted, so now I can't log in. Is there any way I can disable auto-login without using the GUI?EDIT:I was able to get around this by going to a TTY, logging in, then killing X and starting GDM again. Still, this is not acceptable. Subscribe to the bug here, if you agree with me.
View 1 Replies
View Related
Jun 17, 2010
I'm working on a kiosk-type system. What it needs to do is boot, auto login as a specific user, display only the Gnome desktop (no icons, etc), and auto start an application.
Is this possible (I'm sure it is)? If so, can this be scripted, i.e. without having to use graphical tools like Sabayon.
View 2 Replies
View Related
Apr 28, 2011
I am running xubuntu 11.04 (ISO from early this week). During install, I selected to NOT auto login but to present this gdm panel where I have to enter the password (or other users could log in).
Now I decided to enable auto-login (and to start the screensaver right afterwards) ... so I opened up the "login screen settings" (systems menu), unlocked that window and changed it to "login as xxx".
Then i rebooted and would have expected to be greeted with my screen saver on a logged-in session afterwards. But what happens is that there is a gdm panel sitting ... showing me
AUTOMATED login
Other
Where the first item wont do anything.
So I have to select other and enter user name + password ?
Is that how it is supposed to work?
View 3 Replies
View Related
May 1, 2011
My apartment management recently installed a new system so that I have to log-in every time I want to use the internet (wifi). It's kinda annoying because for some reason firefox doesn't offer to remember my username and password for this site. It's more annoying because when it opens a new window which has to be kept open while I use the internet, and after login redirects me to google.co.th, which I don't ever use.
Is there a script I could create which will login for me and handle this annoyance? It would make my daily life on computers just that little bit nicer.
View 4 Replies
View Related
May 23, 2011
Still learning OS. I had auto login set and noticed at the login screen an option to boot straight to XBMC. Now I cannot boot normally anymore. Walk me through fixing this please. I'm not afraid of the command line.
View 2 Replies
View Related
Mar 9, 2011
I am trying to enable the auto login on Ubuntu 9.04 but it has some creteria.The auto login should be only for first time & after the first reboot it should go normal. I tried it by editing gdm.conf file but it allows me to remain auto login permanently, I need to change this value after first reboot
View 7 Replies
View Related
Mar 19, 2015
I am new to Debian and I have been trying to find a way to auto login to a users account upon Debian booting. Is there a way to auto login to the root account upon a Debian boot? Is it possible to do this with GNOME installed as well as Minimal?
View 1 Replies
View Related
Oct 9, 2009
In level 3, I can successfully auto login a user into x window.
but how auto login works in level 5?
View 9 Replies
View Related
Dec 5, 2010
I have this F-10 system with mythtv loaded. After power-on, it always comes up and auto-logs-in the mythtv account. I don't want that anymore. How/where do I go to DISABLE that "feature"?
View 2 Replies
View Related
Aug 28, 2010
cannot login 11.3 auto?
View 7 Replies
View Related
Aug 1, 2011
Before there was a way to use gdmsetup for auto-login. But now in Fedora 15 i cant do auto-login anymore. Anyone know how i can do this?
This is the problem i cant solve to not show any kind of login prompt (Tried this):
TimedLoginEnable=true
TimedLogin=user1
it shows still the user1/password login prompt and wait for few seconds and then auto login. But i want it straight goes to the desktop.
View 1 Replies
View Related
