Everytime I shut down my netbook the blue Kubuntu Screen comes instead of the Red Ubuntu Screen. I don't want the Blue Kubuntu Screen, I want the RED Ubuntu Screen. How do I do this? I tried installing KDE and KDE for netbooks, and KDE default settings (all from software center). What else do I need to do to get rid of this blue screen?
View 2 RepliesI tried Kubuntu for few days.now I removed kubuntu using remove kde desktop,autoremove commands.Everything is fine.I also selected gdm,removed kdm.Now I dont find Kubuntu in options in the login screen.I also removed all kubuntu applications.But now when I turn on and off my computer, I find blue kubuntu screen.why is that happening even after removing kubuntu?did I do some mistake?How to remove it?
View 2 Replies View RelatedIt is the same drive that I used to install ubuntu, but kubuntu isn't working!
View 3 Replies View RelatedI just recently installed Kubuntu desktop onto Ubuntu and I don't have any shutdown or restart options shown in KDE, but they show up in Gnome. I initially installed Kubuntu using GDM instead of KDM and switched to KDM when I saw that my Gnome taskbars overlayed my KDE taskbars. To switch from GDM to KDM I used the following command:
sudo dpkg-reconfigure gdm
After enabling KDM the terminal suggested a command to configure KDM, however I can't remember the command. I ran it and I got a message that KDM was already configured.
I created a USB stick with Ubuntu 9.10, used it to boot a dell Inspiron 1550 laptop which has WinXP. I tested 9.10, everything went fine out of the box so to speak. But when I went back and tried to boot XP again I got a blue screen. XP starts in safe mode and no apparent problems are detectable but it will not start in Win normal mode anymore.
View 8 Replies View RelatedJust upgraded to 10.04. Screen is now unusable. It's like looking at it through a blue filter. It seems to be averaging the brightness. if there is a large dark area of screen real estate the paler sections getbrighter.The very bizarre thing is, if I switch user, whilst the theme is different, the brightness problem is gone...
View 1 Replies View RelatedI esablished a dual boot with Windows 7 and Ubuntu on separate partitions. Then, as I realised that Windows 7 was rubbish and Ubuntu annoyed me by losing wireless connectivity after an update, I decided to go back to Windows XP for a while. So I did what I probably shouldn't have done, and formatted the partition (or so I thought) with Ubuntu on, using Windows.
Now, on booting up the system, all I can get is the Grub Rescue prompt and nothing in the Bios menus seems to be of any assistance.
I've tried booting XP from a CD, but a blue screen error always occurs at the same point in the installation. I wonder if I should make a CD/external drive with Ubuntu on, reinstall it, and go from there?
While I was trying to install a package in the package manager I accidentally removed a package that I am not aware of.I got a crash report telling me to enter something along the lines of a broken package repair mode. The next time I started my computer it froze at the blue screen with bubbles after login.Is there a way to access the gui using a recovery/rescue type mode so I can access the package manager, or is there a way to find and reinstall the vital package?
View 3 Replies View RelatedI deinstalled Ubuntu today. Just deleted the partitions etc and thought it would be fine, but now this weird grub thing is telling me:
error: no such partition
grub rescue>
I am at the end of my wits: I downloaded a liveCD, which will not boot. My XP cd boots but gets a blue screen afterwards I downloaded a windows 7 live cd which did not help either
Problem is, I can't load my bios anymore to change the boot order... Didn't even know Grub was part of linux...
Point is, I got a presentation tomorrow and all my important files are on that laptop. . . the setroot=(hd0,0) gives no response. I tried a bunch of other commands but I keep getting unknown command...
I have had Xp on my pc for a number of years, and have just installed Ubuntu as a dual boot os. I had a bit of trouble installing GRUB, but that's been resolved. My real problem is that now, after reinstalling GRUB, windows crashes at shutdown with a blue screen, as follows.
Code:
0xc0000021 {Fatal system error}
Windows logon process system process has unexpectedly terminated with a status of 0x0000000
The System has been shut down
When i try to install Fedora 15 on a clean machine it freezes as soon as the pixelated load bar with the white, light blue and dark blue colors show.
I have tried several different versions of Fedora (64bit and 32bit) and have tried to burn it to a CD and/or DVD (For the larger version) and copying it to a usb pen with universal linux usb, liveUSB creator (from Fedora) and last one i don't remember the name on.
I just installed Ubuntu using Wubi and I am having problems with it. I am running an x58 Rampage II Gene with a radeon hd4850. I'm using a polaroid tlx-04240b hdtv for my monitor. After installing via wubi when I select ubuntu from grub I just get a blue screen that says no signal. I had the same problems before when I tried installing ubuntu and I finally gave up after messing with it for a while. Anyhow I finally started trying to figure it out again and I am brand new to linux so i really dont have a clue what to do here. I'm about 70% sure the problem is just the resolution being to high or the proper driver not installed but as i said I've never successfully used linux so i just dont know how to fix it.
View 7 Replies View RelatedWhen I start ubuntu, memtest86+ work to testing memery... Nothing else show up.... just blue screen with testing. I can't log in to ubuntu I don't no how to fix that I tried to use live cd to edit grub, but no grub at all. maybe because i do something wrong from this answer: [URL]...
[code]...
I have a Toshiba NB305 on which I've installed 10.04 and then 10.10. I set it up to dual boot windows, but windows has never booted. I get a quick blue screen, and then it goes back to the grub menu. Ubuntu boots just fine. I occasionally have reason to boot into Windows. So it would be nice to get it working. Here's the output from boot_info_script.
[Code]...
Currently i am running fedora 13 with KDE and I get bore seeing blue login screen. I tried to change it under System Settings->Advance->Login Window , but it doesnt work.
View 2 Replies View RelatedI use red hat linx ES 4 ,5 , how can I start up attached screen to config the lan interface in command mode ?
View 1 Replies View RelatedI am rebuilding my server with Centos 5.3 and is using a RocketRAID 1740 card. Pop in the Centos DVD, which I have used on my other installs. I typed in "linux dd" to allow me to install the RocketRAID drivers. After selecting the drivers and skipping the test for the media. The screen would be just blue and no progress was seen. I left for hours... and still nothing happens..
View 3 Replies View RelatedI did exactly this tutorial says [URL] But now my Ubuntu 11.04 is stuck at blue-white login screen. Only User Defined Session and Recovery Console options are available but they are not working as well. But when I did the Gnome 3 upgrading, it asked for me to remove unused packages and I said yes. About 20 packages removed. Do I need to reinstall my Ubuntu? Or can I get my old Gnome 2? (Not Unity, I didn't like it.)
View 1 Replies View RelatedI have tried dual booting Ubuntu 9.10 and W2K two times and this has resulted in a blue screen of death in the Windows partition. I have subsequently had to wipe Linux and restore Windows using fdisk/ mbr.
The MBR was set to hd0, but should this be installed on the Linux or Windows partition to prevent this?
I have just insall Jessie but I have a blue screen debian with three logos in the midle: harddrive, tools, browser, but no link no menu, only the console.
I have install KDE
my graphique card is
VGA compatible controller: NVIDIA Corporation G72M [Quadro NVS 110M/GeForce Go 7300] (rev a1)
Why do I have a log in screen and no mouse on PCLinuxOS live install. I have the blue background and the graphics but no mouse and just a log in screen. I can log in root/root or guest/guest but not much else whats up.
View 8 Replies View RelatedI got out my old Fuji Finepix s3100 and set it to web cam mode to see if anything had changed in the world of usb video drivers. Lo and behold it worked! I can watch myself on cheese web cam booth. kewl, but I wanted more. So, just recently hearing about chatroulette on the Daily Show, I click and wahla no go . After flash comes up and asks for and receives user permission to access my hardware, I click to find a random stranger, and my camera displays yellow and blue lines across its onscreen display box. I notice that movement is noticed by the camera. If I move I notice a change in background/lines. As far as I can tell, my camera is not a fault. I mean it works for local viewing. Is this a flash or possibly a chatroulette problem?
[Code]...
-Ubuntu 10.04 with MPlayer/Smplayer & VLC installed via the repos. -Installed the Ubuntu Restricted Extras package (everything except flash, extra fonts, & java) & w32codec packgae (medibuntu). -Computer in question is 800mhz Celeron, 256MB RAM & one of those basic Intel Integrated Graphics Chip. I'm having problems playing some video files. When trying to play these files with Smplayer, I get a blue screen but can still hear audio (default video output). After switching the video output to x11(slow), I can now see the picture but it's not playable (some video will show maybe one frame every 2 seconds, some video would play for half-a-second then just freeze). This happens mainly with large files (not 100% accurate, but in general files over 300MB).
Mplayer log gives the "Your system is too slow to play this file" & "Bad alloc:insufficient resources" messages. So I'm guessing this is not a codec problem, but a system resources problem? Is there any option, trick, tweaks, etc. I can use to play these problematic files or is it just not possible because of my system specifications? Is there a way I could tell mplayer to play these files with lower bitrates & resolution? Maybe this could reduce the resources needed to play?
When i type vi /etc/network/interfaces, i get a blank screen with blue dashes on the left side. "/etc/network/interfaces/" [New DIRECTORY]. I am running Ubuntu 11.04 server and am trying to set static ip. I found a work around but why is this happening?
View 9 Replies View RelatedFor the first time, I booted up a Kubuntu live CD on a laptop (850 MHz, 40 GB HD, 256 MB RAM). Earlier releases (< 9.04) boot up fine but it does not. It hangs up right on the splash screen and I can view nothing but a blinking cursor on the console screen. The screen hangs when the loader reaches about 10% in the blue bar. No further information can be provided when there is just a blinking cursor at the console. The CPU shows no activity. The CD boots up fine on other computer. How do I go on installing Kubuntu? Is it a good option to use the Ubuntu Server CD and install all the Kubuntu desktop software on it once it is installed (Server edition is not live disk, and I do not have an alternate install CD)?
View 1 Replies View RelatedI'm a bit of a nube with Linux. Have had it installed and Acer Veriton for a while but after last yum update it now hangs on the blue screen with the F bubble in the middle. I can login remotely OK but am not sure what to look for. It seems to be something X11 related but I'm not sure. I would post the relevant logs but am not sure which ones are associated with this problem.
View 5 Replies View RelatedWhat has to be done to turn off the blue screen with the white 'sticker' in the middle during boot time?
View 2 Replies View RelatedHave recently dual-installed F14 with Windows 7 on an Asus Eee PC 1015P, have been in and out of both systems satisfactorily a number of times. Now the Fedora boot just hangs up at the plain blue "f" screen. I have been prodding around looking at the problem of having no WLAN under Fedora but have not knowingly made any changes. I thought about just doing a re-install but am reluctant to risk messing things up further i.e damaging the Windows until I have Fedora working ok.
View 11 Replies View RelatedI have installed Fedora 11 and have been using it for about a 4 months now. Everything has been working just fine until this morning when I booted up the computer and it hung at the blue screen with the F bubble in the middle. I waited about 10 minutes without any change to the system. I held down the power button to power off and tried starting the computer again with the same result.
View 3 Replies View Relatedthere is a way to change the OS boot screen from the blue loading bar at the bottom to something more fancy. For example if you take a look at Oracle Enterprise Linux 6 they have a loading screen that makes an "O" on start up. Note: I am not talking about GRUB, I already know how to change the grub boot screen. If so can someone provide the steps needed to modify the OS loading screen.
View 1 Replies View Related