I am rebuilding my server with Centos 5.3 and is using a RocketRAID 1740 card. Pop in the Centos DVD, which I have used on my other installs. I typed in "linux dd" to allow me to install the RocketRAID drivers. After selecting the drivers and skipping the test for the media. The screen would be just blue and no progress was seen. I left for hours... and still nothing happens..
View 3 RepliesIve recently built a music server with the following configuration:
AMD Athlon 64 X2 5200 processor
Gigabyte GA-MA74GM-S2 Motherboard with 2GB ram
Western Digital Caviar Green 1TB SATA Hard Drive
Samsung 22X CD/DVD Burner IDE
I would like to be able to run Fedora 10 (and Vortexbox, an application to burn and store CD�s) but have been unsuccessful in getting F10 to load. I am a novice Linux/Fedora user. I've been able to load and run Windows XP on the server with no problem. I have downloaded and verified both the x86_64 DVD and the x86_64 Live CD from the Fedora website. With the live CD, the last thing that appears before the screen goes blank and the install freezes is the blue line changing to white. I have tried several different SATA configurations , have turned off all non essential options in BIOS(ethernet, USB support), and have tried loading with fail safe bios settings.
When i type vi /etc/network/interfaces, i get a blank screen with blue dashes on the left side. "/etc/network/interfaces/" [New DIRECTORY]. I am running Ubuntu 11.04 server and am trying to set static ip. I found a work around but why is this happening?
View 9 Replies View RelatedI'm using DELL VOSTRO 3500 laptop. i have installed Windows 7 and While installing Cent OS 5.5 in the Unpartionted disk space 65GB. The installation wizard step1 is going into Blank Screen. I couldn't know what is it.
View 1 Replies View RelatedI am having the same problem, as soon as X tries to load my screen just goes blank. I have an ATI Radeon 9550. At first I tried switching between VGA and DVI as well but upon ruling that out, I switch to my on-board video card and that is working thus far, but I'm trying very hard to figure out a way to be able to switch back. Anyways I'll check back in later on if I have any new information I will post.
View 3 Replies View RelatedI'm attempting to install CentOS 5.2 x86_64, on an HP Pavilion/Intel Core Duo.
The DVD boots, anaconda starts, displays blue screen with "Loading usb-storage driver", and then hangs at a blue screen of garbage.
I just finishing burning ubuntu on my laptop and was getting ready to partition my disk to allow space for ubuntu. I restarted my computer and when it was restarting ubuntu logo came up (as it booted from the disc). I was not wanting to install it at this moment so i was waiting for it to load then cancel it(just like a windows installation).It then froze and became pixelated with green and white colours.I thought it was nothing maybe just an error in teh disc. I waited 5-10 minutes then held the power button to shut it off. I then went to settings in the bios and changed it to boot from hdd first. After restart, windows began to load for like 3 seconds then blue screen. I dont know what went wrong or why this is happening.During installation of Ubuntu on my second try I keep getting:sudo: can't read /etc /sudoers: Input/Output errorsudo: no valid sudoers sources found, quittingWhat are the odds of me still having my windows 7 data?and could Hiren's boot cd help?
View 5 Replies View RelatedWhen i try to install Fedora 15 on a clean machine it freezes as soon as the pixelated load bar with the white, light blue and dark blue colors show.
I have tried several different versions of Fedora (64bit and 32bit) and have tried to burn it to a CD and/or DVD (For the larger version) and copying it to a usb pen with universal linux usb, liveUSB creator (from Fedora) and last one i don't remember the name on.
I have had Xp on my pc for a number of years, and have just installed Ubuntu as a dual boot os. I had a bit of trouble installing GRUB, but that's been resolved. My real problem is that now, after reinstalling GRUB, windows crashes at shutdown with a blue screen, as follows.
Code:
0xc0000021 {Fatal system error}
Windows logon process system process has unexpectedly terminated with a status of 0x0000000
The System has been shut down
Have recently dual-installed F14 with Windows 7 on an Asus Eee PC 1015P, have been in and out of both systems satisfactorily a number of times. Now the Fedora boot just hangs up at the plain blue "f" screen. I have been prodding around looking at the problem of having no WLAN under Fedora but have not knowingly made any changes. I thought about just doing a re-install but am reluctant to risk messing things up further i.e damaging the Windows until I have Fedora working ok.
View 11 Replies View RelatedTried to install fedora on new laptop, boots up to blue screen but no top panel or launcher
View 2 Replies View RelatedIt is the same drive that I used to install ubuntu, but kubuntu isn't working!
View 3 Replies View RelatedI get past the count down. The bars run across the top. Then my lcd monitor announces it has no signal and goes to sleep. Had this problem with earlier versions of Ubuntu, particularly 8.04. Was fixed in 8.10.
get Fedora 11 up and running?
I don't really have any Linux experience. But I wanted to try it out. Now I'm afraid I did not set this up properly. Grub gives me 3 options:
Fedora (2.6.38.8-32.fc15.x86_64)
Fedora (2.6.38.8-26.rc1.fc15.x86_64)
Other
When I select <Other> to boot into windows... it starts to try to boot... but then flashes a quick blue screen & restarts. I tried to boot into Window's normal mode, safe mode, and command line... all just restart fdisk -l gives the following:
[Code]....
I have installed CentOS 5.2 on a couple of machines. They work fine, but the screen goes black (blank) after several minutes. It's a screensaver of some sort. I'd like to disable it. I searched the CentOS forums, searched Google, searched Yahoo, and I can't find any way to disable this blank screensaver.
View 12 Replies View RelatedWe are trying to setup VNC on our server running CentOS 5. We followed the instructions found here [URL]
But when we try to remote in, all be get is a blank screen with a cursor.
I have 2 servers, I set the first one up so that I can remote to it and connect with VNC over ssh by following:[URL]ServerThe 2nd server I did the same, but I cannot connect! When I do, vncviewer prompts for a password and then opens a window of the correct size, but it is all white and then my ssh session is locked! I can't enter any more commands, I have to kill the session.
View 3 Replies View RelatedIs there a known problem with the Lubuntu 10.10 image here? I have downloaded it to two different computers, then burned the images to two different blank CD's (different brands) and neither loads. Both only get as far as the Lubuntu menu, once ENTER is pressed at that point to load the LiveCD, a blank screen eventually appears with a flashing cursor at the upper left of the screen, that's it. They were both burned using the slowest burn speeds available.
View 9 Replies View RelatedI've been trying out linux distros to see which I want to progress further with. I have a bunch of removable HDDs. I put a single distro on each HDD. I just installed CentOS 5.4 on a machine that has had successful installations of Debian 5.0.3, Fedora 12, and OpenSuse 11.2 installed on it. I still have those HDDs and they still boot and run fine.
CentOS 5.4 installed in graphical mode just fine. I even noticed that it appeared to probe my video card (ATI Radeon 9250 AGP) just fine. I removed the media and rebooted and the CentOS graphics came up fine, and it asked me a few questions such as could I hear the sound. Everything went fine when it said it was now booting to CentOS for the first time, and the screen went blank. The monitor LED stayed green, however, so it looks to me like the monitor still sees a signal.
I'm guessing I need to boot into text mode and fiddle with the display settings, but I'm pretty much lost there.
I did a lspci under Fedora and it lists the following for video:
let me log out of my dang XP machine, and cut and paste the entire stuff straight from the machine I installed CentOS on which is now running Fedora 12.
I just installed Linux 5.5 on a Toshiba laptopn (i3, 64 bit). Centos runs until it reaches a very dark screen. On a few occasions, I am able to see something but the screen is very dark.
View 1 Replies View RelatedThis is probably not possible, but just wondering, restarted centos 5.2 remotely, hung at shutdown, kvm'ed to see what was hanging it up, control c'ed and then ctl alt del, just trying to kill the process, was brought back to the login screen, but unable to type anything. Alt-f1 switched to a different virtual console, which was just a blank screen and a blinking cursor, but now able to type things. Want to avoid hard shutdown. Is there anyway to force shutdown/reboot the machine from this console?
View 1 Replies View RelatedI've been trying to install 5.5 here for the past few days, first from USB and now from the CDs, with no success. The problem occurs when I reboot after installing. After the BIOS has done it's thing I'm faced with a blank screen with a blinking cursor at the top left of the screen.
Initially I assumed that this was due to the intel driver problem which is reported in the release notes as a known issue, and the PC I'm installing on has intel graphics. However I have now done a text install and still have the same issue. I'm able to boot up the system using the CentOS live CD, which encounters no issues, and it mounts the local system no problem. After unmounting and remounting to get write access I'm able to change the device entry in /etc/X11/xorg.conf to have the Option "DDC" "false" entry. I can also see that the runlevel is set to 3 in /etc/inittab, still I get the blank screen on attempting to boot.
Any ideas on what might be wrong here? It really sounds like the intel driver problem people have described, and yet I can't even boot in text mode so that doesn't seem to be the case here. Could there be something wrong with the bootloader?
I have been running 10.04 quite successfully, when I upgraded to 10.10, I have a problem with the newer kernels. If I let it boot into the latest one 2.6.35-23, I get the Ubuntu 10.10 splash screen for a second then a blank screen, same with 2.6.35-22. I have to run with 32-25 to get it to load the gui.
I have an AMD Sempron 2800, 1.6GHz pc, but I'm not sure if it's running 64bit.
I've been running Ubuntu 10.10 very smoothly for a while now. Decided to upgrade to 11.04 - managed to corrupt the hard disk the first time by letting the laptop hibernate part of the way through but reinstalled from a live CD of 11.04 and it's now working except for this issue.
If I shut the screen on my laptop (or press the screen off button) either the screen won't come back on or it will but frozen (I can move the mouse but not click on anything etc.) In this state music continues to play (from spotify under wine) and if I press my hibernate shortcut (power button) the computer hibernates, only to wake into the same situation. I've got a Dell Latitude D520, upgraded to a bigger hard disk and more ram - the ubuntu partition has 50gb. Windows is working fine.
Edit: I noticed a sticky thread which includes something about a blank screen but I think this is a different issue?
First time I am having issues with Centos.
I bought a Intel DQ45CB LGA Q45 Micro ATX Motherboard and I am installing the 64 bit version of centos.
The install of Centos goes just fine. However when I first try to boot up, after post is done, I get a blank screen. I do not even get on the Grub screen. No access to any of the ttys. No access to anything, files, folders. I only get a blkinking cursor, no command prompt, nothing.
This happened with Centos 5.2 and 5.3
Just for the hell of it, I installed XEN Xitrix and I have no issues like that.
I installed CentOS 5.5 last night using the DVD ISO (from a USB drive thanks to the Universal USB Installer). I selected the Server and Virtualization packages, and finished the install all the way through. At the end, the installer asked me to remove any installation media and reboot the system. After rebooting, the system hangs on a blank screen with a blinking cursor in the top left corner that does not accept text. This is before the GRUB screen appears. For partitioning, I created a 4GB swap partition on sdb and a 16GB ext3 partition on sda, mounted at /, with the remaining free space on sdb mounted at /storage.
Does anyone know why this system is hanging before the GRUB menu?
I just recently installed Ubuntu 10.10 on my computer. Everything worked fine at first and then I started to fix all things I wanted to have on my laptop, programs and layout etc. And then I decided to restart the computer to make all the updates and installations work properly on my newly installed Ubuntu computer, but then it seems so that everything just crashed. When I started to computer again a blue screen saying "Memtest86 v4.10" came up. It is some sort of test of the computer's capacity I think. So I thought, ok fine, it is probably really good to do a test like that after a new installation. Like, standard procedure perhaps. It took 1 hour and then it said that no errors could be found on the computer and that I could click ESC to continue.
I did that but then when the computer restarted this blue screen showed up AGAIN and started up a new test (the same one)!!! I can't open up Ubuntu, I've tried several times. What should I do??? Is my computer broken now????
I have installed Ubuntu 11.04 along side windows 7 ultimate. But the problem is as soon as I switch on my computer. There is only a blank screen with my TFT screen displaying a msg "Out of Range"
Then suddenly Ubuntu loads without showing any option to load windows 7.
So finally decided to upgrade the desktop (dual-booting with Windows 7 for games) from 9.10 (fresh install awhile ago, never did anything with it) to 10.04 - upgrade went fine, reboot, watch grub go by, and voila. Blank screen.
Things I tried in grub:
add 'xforcevesa'
add 'xforcevesa' & remove 'quiet splash'
add 'nomodeset' & remove 'quiet splash'
add 'nomodeset xforcevesa' & remove 'quiet splash'
[Code]...
I was hoping to test out Windows 7 in a VM, see how far I could get for GPU acceleration there - I'd much rather not run Windows on the bare iron for that machine, but if I can't get this fixed I have no option :-/
I have an system that d8.2 appears to install correctly. On first (or subsequent) boot, I get the DB8 load screen, then a quick fsck, then nothing. I appear to have some sort of environment running as I can move a mouse pointer, but nothing else.
CTRL-ALT-F2 results in the mouse pointer vanishing, but nothing else. I expected to end up at the CLI.
I have tried different installs and options, always the same result. This machine ran an earlier version with issues.