Ubuntu Installation :: XP Blue Screen After Dual-Boot?
Feb 11, 2011
I have had Xp on my pc for a number of years, and have just installed Ubuntu as a dual boot os. I had a bit of trouble installing GRUB, but that's been resolved. My real problem is that now, after reinstalling GRUB, windows crashes at shutdown with a blue screen, as follows.
Code:
0xc0000021 {Fatal system error}
Windows logon process system process has unexpectedly terminated with a status of 0x0000000
The System has been shut down
View 2 Replies
ADVERTISEMENT
Nov 18, 2010
I have a Toshiba NB305 on which I've installed 10.04 and then 10.10. I set it up to dual boot windows, but windows has never booted. I get a quick blue screen, and then it goes back to the grub menu. Ubuntu boots just fine. I occasionally have reason to boot into Windows. So it would be nice to get it working. Here's the output from boot_info_script.
[Code]...
View 4 Replies
View Related
Jan 2, 2011
I have tried dual booting Ubuntu 9.10 and W2K two times and this has resulted in a blue screen of death in the Windows partition. I have subsequently had to wipe Linux and restore Windows using fdisk/ mbr.
The MBR was set to hd0, but should this be installed on the Linux or Windows partition to prevent this?
View 8 Replies
View Related
Mar 15, 2011
Have recently dual-installed F14 with Windows 7 on an Asus Eee PC 1015P, have been in and out of both systems satisfactorily a number of times. Now the Fedora boot just hangs up at the plain blue "f" screen. I have been prodding around looking at the problem of having no WLAN under Fedora but have not knowingly made any changes. I thought about just doing a re-install but am reluctant to risk messing things up further i.e damaging the Windows until I have Fedora working ok.
View 11 Replies
View Related
Nov 7, 2009
I get past the count down. The bars run across the top. Then my lcd monitor announces it has no signal and goes to sleep. Had this problem with earlier versions of Ubuntu, particularly 8.04. Was fixed in 8.10.
get Fedora 11 up and running?
View 2 Replies
View Related
Jun 26, 2011
I don't really have any Linux experience. But I wanted to try it out. Now I'm afraid I did not set this up properly. Grub gives me 3 options:
Fedora (2.6.38.8-32.fc15.x86_64)
Fedora (2.6.38.8-26.rc1.fc15.x86_64)
Other
When I select <Other> to boot into windows... it starts to try to boot... but then flashes a quick blue screen & restarts. I tried to boot into Window's normal mode, safe mode, and command line... all just restart fdisk -l gives the following:
[Code]....
View 4 Replies
View Related
Mar 10, 2010
When I start ubuntu, memtest86+ work to testing memery... Nothing else show up.... just blue screen with testing. I can't log in to ubuntu I don't no how to fix that I tried to use live cd to edit grub, but no grub at all. maybe because i do something wrong from this answer: [URL]...
[code]...
View 2 Replies
View Related
Jul 28, 2009
I'm a bit of a nube with Linux. Have had it installed and Acer Veriton for a while but after last yum update it now hangs on the blue screen with the F bubble in the middle. I can login remotely OK but am not sure what to look for. It seems to be something X11 related but I'm not sure. I would post the relevant logs but am not sure which ones are associated with this problem.
View 5 Replies
View Related
Dec 19, 2010
What has to be done to turn off the blue screen with the white 'sticker' in the middle during boot time?
View 2 Replies
View Related
Jan 6, 2010
I have installed Fedora 11 and have been using it for about a 4 months now. Everything has been working just fine until this morning when I booted up the computer and it hung at the blue screen with the F bubble in the middle. I waited about 10 minutes without any change to the system. I held down the power button to power off and tried starting the computer again with the same result.
View 3 Replies
View Related
Jun 1, 2011
there is a way to change the OS boot screen from the blue loading bar at the bottom to something more fancy. For example if you take a look at Oracle Enterprise Linux 6 they have a loading screen that makes an "O" on start up. Note: I am not talking about GRUB, I already know how to change the grub boot screen. If so can someone provide the steps needed to modify the OS loading screen.
View 1 Replies
View Related
Apr 24, 2010
I am completely new to Ubuntu and recently installed Ubuntu 9.10 using the live CD. I allowed the set-up to install Ubuntu next to Windows XP and to let me choose which OS boots at start-up. Upon restarting my computer after installation, however, there is no boot-screen and my computer goes straight to WinXP. I have done some reading and it seems like I need to install GRUB, but I'm really not sure if this is really the case or if I am missing something else entirely.
View 9 Replies
View Related
Mar 9, 2011
I just finishing burning ubuntu on my laptop and was getting ready to partition my disk to allow space for ubuntu. I restarted my computer and when it was restarting ubuntu logo came up (as it booted from the disc). I was not wanting to install it at this moment so i was waiting for it to load then cancel it(just like a windows installation).It then froze and became pixelated with green and white colours.I thought it was nothing maybe just an error in teh disc. I waited 5-10 minutes then held the power button to shut it off. I then went to settings in the bios and changed it to boot from hdd first. After restart, windows began to load for like 3 seconds then blue screen. I dont know what went wrong or why this is happening.During installation of Ubuntu on my second try I keep getting:sudo: can't read /etc /sudoers: Input/Output errorsudo: no valid sudoers sources found, quittingWhat are the odds of me still having my windows 7 data?and could Hiren's boot cd help?
View 5 Replies
View Related
Jul 8, 2011
I have installed Ubuntu 11.04 along side windows 7 ultimate. But the problem is as soon as I switch on my computer. There is only a blank screen with my TFT screen displaying a msg "Out of Range"
Then suddenly Ubuntu loads without showing any option to load windows 7.
View 2 Replies
View Related
Dec 10, 2009
I am rebuilding my server with Centos 5.3 and is using a RocketRAID 1740 card. Pop in the Centos DVD, which I have used on my other installs. I typed in "linux dd" to allow me to install the RocketRAID drivers. After selecting the drivers and skipping the test for the media. The screen would be just blue and no progress was seen. I left for hours... and still nothing happens..
View 3 Replies
View Related
May 30, 2011
When i try to install Fedora 15 on a clean machine it freezes as soon as the pixelated load bar with the white, light blue and dark blue colors show.
I have tried several different versions of Fedora (64bit and 32bit) and have tried to burn it to a CD and/or DVD (For the larger version) and copying it to a usb pen with universal linux usb, liveUSB creator (from Fedora) and last one i don't remember the name on.
View 1 Replies
View Related
Aug 13, 2010
It is the same drive that I used to install ubuntu, but kubuntu isn't working!
View 3 Replies
View Related
Dec 7, 2010
I am unable to boot my laptop in the usual way. The fedora emblem in the centre of the screen appears and starts to turn from white to dark blue in the usual way. When it is almost complete it stops.
In order to make the machine boot i hit escape and a message says leaving interactive startup mode. At this point the machine continues to start up.
When i do manage to get it to boot i get the following message repeated many times:
I should also add... The laptop will not close down, once i click switch off the screen turns blue and displays the fedora emblem in the centre. At the top right text says "Shutting Down" but at this point the system hangs.
View 3 Replies
View Related
May 8, 2010
I've had Windows XP Home installed on my netbook (Toshiba NB205) and I've just tried to install squeeze via net install. In particular, I installed grub. Everything seemed to go ok during the installation, but when I boot up, all that appears is a blank screen with nothing but at "j" and a cursor. One thing I can think of that might offer a clue, is that when asked to installed grub, the installer said it recognized two operating systems: Microsoft Windows XP Home, and Windows NT/XP. The latter is not really an operating system, but the backup partition.
I don't know how this might affect grub's functioning. What does this "j" mean? Looking at this: [URL]. Could this have some thing to do with boot flag? Should I switch it to my NTFS partition instead of my root partition? Doing that at least let's me boot into Windows. But that's not what I want. I've never dual booted before. So I booted back up with my USB, intending to reinstall Debian, and it loaded grub instead. So apparently grub is now on my USB. Then it booted me into Debian.
View 3 Replies
View Related
Mar 15, 2009
I currently have a successful dual boot of XP and Fedora 10. I need to re-format my windows partition and re-install XP. When I use the windows CD, it asks to boot from cd. I hit any key and the screen goes black and stays there. XP is the primary OS (C, fedora is the secondary (D. Any thoughts? I still need Windows, because I am just learning Fedora.
View 2 Replies
View Related
May 26, 2010
I'm having no end of problems trying to get 10.04 onto my older Toshiba Satellite A50 laptop that I use as a spare laptop round the house. The laptop previously dual booted with XP and Xubuntu fine. I wanted to give Lubuntu a go to see if it's performance was better on this older hardware. When installing I got the black screen of death, and also got the same problem with the Xubuntu CD. Research pointed me in the way of this article: [URL] I was able to boot the Lubuntu Live CD using the instructions outlined in method A.
Once installed however I rebooted and Grub seemed to be knackered. Just sent me to a recovery console of which I had no idea what to do. As I could no longer boot into Windows either I reinstalled Xubuntu 9.10 and all was fine. I decided yesterday to give it another bash this time connecting to my wireless from the live cd hoping it would download an update to fix this problem. Nadda, Grub this time did show and I was able to boot into XP, but upon picking my Linux distro I now get an unrecognised device error with a long string of charachters and then it dumps be back into the grub menu, choosing the recovery mode version does the same thing.
View 6 Replies
View Related
Aug 4, 2011
Tried to install fedora on new laptop, boots up to blue screen but no top panel or launcher
View 2 Replies
View Related
Jan 6, 2011
I want to install ubuntu 10.10 on my old laptop. I try to do this by usb stick, i came to the blue window boot device, there are 4 options to choose: Hard disk, cd-rom/dvd, floppy disk and lan boot. I tried all of them, but nothing happend.
View 5 Replies
View Related
Jun 4, 2009
Ive recently built a music server with the following configuration:
AMD Athlon 64 X2 5200 processor
Gigabyte GA-MA74GM-S2 Motherboard with 2GB ram
Western Digital Caviar Green 1TB SATA Hard Drive
Samsung 22X CD/DVD Burner IDE
I would like to be able to run Fedora 10 (and Vortexbox, an application to burn and store CD�s) but have been unsuccessful in getting F10 to load. I am a novice Linux/Fedora user. I've been able to load and run Windows XP on the server with no problem. I have downloaded and verified both the x86_64 DVD and the x86_64 Live CD from the Fedora website. With the live CD, the last thing that appears before the screen goes blank and the install freezes is the blue line changing to white. I have tried several different SATA configurations , have turned off all non essential options in BIOS(ethernet, USB support), and have tried loading with fail safe bios settings.
View 4 Replies
View Related
May 22, 2011
I just recently installed Ubuntu 10.10 on my computer. Everything worked fine at first and then I started to fix all things I wanted to have on my laptop, programs and layout etc. And then I decided to restart the computer to make all the updates and installations work properly on my newly installed Ubuntu computer, but then it seems so that everything just crashed. When I started to computer again a blue screen saying "Memtest86 v4.10" came up. It is some sort of test of the computer's capacity I think. So I thought, ok fine, it is probably really good to do a test like that after a new installation. Like, standard procedure perhaps. It took 1 hour and then it said that no errors could be found on the computer and that I could click ESC to continue.
I did that but then when the computer restarted this blue screen showed up AGAIN and started up a new test (the same one)!!! I can't open up Ubuntu, I've tried several times. What should I do??? Is my computer broken now????
View 6 Replies
View Related
Dec 16, 2010
I followed a tutorial to install XP across my entire HDD. I installed Ubuntu 10.10 "Alongside another OS". Ubuntu loads fine, but when trying to load XP, the boot screen shows up, but then the computer restarts and returns to the GRUB menu.
I saw some threads on this site and tried to type: sudo gedit /boot/grub/menu.lst
In the terminal. It returned a blank text document so I'm not sure if that information was outdated. I then typed: sudo fdisk -l
And got this:
Not sure what any of this means, but I sure hope someone else does. I would say forget XP, but it's hard to let go of some of the games and software I use. I appreciate any responses, thank you.
I tried to format the table as it appeared, but the forum corrected the extra spaces.
View 7 Replies
View Related
May 25, 2010
I'm running Ubuntu 10.04 and a small Windows 7 partition (cuz I can't get Ubuntu to run my MSI TV@nywhere plus card but that's another issue).I can log into Windows fine. If I choose Ubuntu, however, the boot process will go thru a few screen flickers. Then one of two things happens:1) I get a scrambled up pixelated image (not sure what it is) for about 3 second, then it goes into the login screen and I can log in normally.2) I get the scrambled up pixelated image and it hangs. This happens about 4 times out of 5 when rebooting.
I do have an nVidia card and a beta driver (they published it the 21st, I believe, of this month) but this happened long before that. It's happened ever since I installed any of the drivers (I've tried a couple different versions, hoping to fix this) for my card.
My system is a frankenputer:
Phenom II quad core 3.0 cpu
nVidia GeForce BFG 6600
4G DDR3
500G drive
Note: I do have 3D rendering when I finally get into the desktop. Everything works great, except that when I'm playing my mmorpg, Regnum Online, it freezes the entire computer and I have to reboot (not sure if that has anything to do with it or not).In case it's needed, this is my grub:(Second note: I'm sorry for the length of the post but I don't know how to upload documents/files to show)
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
[code]...
View 1 Replies
View Related
Apr 27, 2010
I've had Windows 7 installed for a few months now and would like to install Fedora 12 on a separate partition. I've tried this three times now, all of them ending with something wrong. The problem that exists for me now is that when I install Fedora 12 and boot up for the first time in GRUB, Fedora 12 works fine. ut when I boot into Windows 7 from GRUB, it just comes up with a black screen and says "BOOTMGR is missing; press ctrl + alt + del to restart" at the top. I don't believe that GRUB is booting into the wrong partition because I have no Windows recovery partition, just Windows 7. Also when I try and fix the Windows 7 partition with the system recovery disk, it says that the volume is corrupt every time. At this point I have everything backed up on a separate drive so I'm open to try installing Fedora 12 again even if it risks screwing up my Windows 7 partition, I would really just like to have a functioning dual boot.
View 2 Replies
View Related
Jun 5, 2010
I am quite experienced user of Ubuntu desktop / server distributions. Recently my desktop 9.10 disk failed and I decided to reinstall using 10.04. My configuration is a dual disk dual bot system. I have XP Pro SP3 on one disk and Ubuntu 10.04 on second. XP has own, untached MBR ubuntu got Grub 2 installed on the same disk as Ubuntu. Ubuntu disk is booting first in BIOS. Grub 2 detected both system, however I can boot only to Ubuntu. When I am trying to boot XP I got black screen only. Looks like booting is stack in BIOS stage, because crt+alt+del reset system.
I read Ubuntu forum, search Google and did not come with any solutions. My XP MBR is OK. I can boot directly, choosing XP HDD in BIOS as a starting disk. All entries in grub.cfg looks fine to me. I made 3 different clear installations of Ubuntu. Each with the same result. I reinstaled Grub2 with no effect. I wonder if this may be a hardware/Grub 2 compatibility issue. I am using quite old components.My motherboard is Assus P4C800 Delux. I have 5 HDDs 2 CD. Exactly the same configuration was OK with 9.10/XP dual disk dual boot using Grub legacy.
[Code]...
View 9 Replies
View Related
Jan 4, 2010
I was running a dual boot Ubuntu 9.10/Windows XP. I reformatted just the windows partition and re-installed it, and now I don't get the option at boot time of what OS I'd like to use...it just boots straight into Windows.
View 2 Replies
View Related
