I'm a bit of a nube with Linux. Have had it installed and Acer Veriton for a while but after last yum update it now hangs on the blue screen with the F bubble in the middle. I can login remotely OK but am not sure what to look for. It seems to be something X11 related but I'm not sure. I would post the relevant logs but am not sure which ones are associated with this problem.
View 5 Replies
I have installed Fedora 11 and have been using it for about a 4 months now. Everything has been working just fine until this morning when I booted up the computer and it hung at the blue screen with the F bubble in the middle. I waited about 10 minutes without any change to the system. I held down the power button to power off and tried starting the computer again with the same result.
View 3 Replies View RelatedWhat has to be done to turn off the blue screen with the white 'sticker' in the middle during boot time?
View 2 Replies View RelatedI'm attempting to install CentOS 5.2 x86_64, on an HP Pavilion/Intel Core Duo.
The DVD boots, anaconda starts, displays blue screen with "Loading usb-storage driver", and then hangs at a blue screen of garbage.
Have recently dual-installed F14 with Windows 7 on an Asus Eee PC 1015P, have been in and out of both systems satisfactorily a number of times. Now the Fedora boot just hangs up at the plain blue "f" screen. I have been prodding around looking at the problem of having no WLAN under Fedora but have not knowingly made any changes. I thought about just doing a re-install but am reluctant to risk messing things up further i.e damaging the Windows until I have Fedora working ok.
View 11 Replies View Relatedthere is a way to change the OS boot screen from the blue loading bar at the bottom to something more fancy. For example if you take a look at Oracle Enterprise Linux 6 they have a loading screen that makes an "O" on start up. Note: I am not talking about GRUB, I already know how to change the grub boot screen. If so can someone provide the steps needed to modify the OS loading screen.
View 1 Replies View RelatedFor the first time, I booted up a Kubuntu live CD on a laptop (850 MHz, 40 GB HD, 256 MB RAM). Earlier releases (< 9.04) boot up fine but it does not. It hangs up right on the splash screen and I can view nothing but a blinking cursor on the console screen. The screen hangs when the loader reaches about 10% in the blue bar. No further information can be provided when there is just a blinking cursor at the console. The CPU shows no activity. The CD boots up fine on other computer. How do I go on installing Kubuntu? Is it a good option to use the Ubuntu Server CD and install all the Kubuntu desktop software on it once it is installed (Server edition is not live disk, and I do not have an alternate install CD)?
View 1 Replies View Relatedthis morning i cannot boot the pc, it stops always on the screen with the logo of fedora in the middle. I think that the reason are maybe the last updates of yesterdayhow can i solve it
View 8 Replies View RelatedI've just installed the new Fedora 11 (just released) through a Live CD having 3 partitions created:
"/boot" - ext3,
"/" - lvm (part 1)
swap - lvm (part 2)
now, I want to add my new Fedora system entry to my "central" lilo.conf, resident on another linux distribution. So, i've done
[Code]...
my lilo fedora entry boots fine but... at the middle of "after boot" loading the system hangs and stops the usual driver detection, etc (normally, it hangs on the CDROM detection or USB 2.0 camera detection).
I get past the count down. The bars run across the top. Then my lcd monitor announces it has no signal and goes to sleep. Had this problem with earlier versions of Ubuntu, particularly 8.04. Was fixed in 8.10.
get Fedora 11 up and running?
I don't really have any Linux experience. But I wanted to try it out. Now I'm afraid I did not set this up properly. Grub gives me 3 options:
Fedora (2.6.38.8-32.fc15.x86_64)
Fedora (2.6.38.8-26.rc1.fc15.x86_64)
Other
When I select <Other> to boot into windows... it starts to try to boot... but then flashes a quick blue screen & restarts. I tried to boot into Window's normal mode, safe mode, and command line... all just restart fdisk -l gives the following:
[Code]....
I am unable to boot my laptop in the usual way. The fedora emblem in the centre of the screen appears and starts to turn from white to dark blue in the usual way. When it is almost complete it stops.
In order to make the machine boot i hit escape and a message says leaving interactive startup mode. At this point the machine continues to start up.
When i do manage to get it to boot i get the following message repeated many times:
I should also add... The laptop will not close down, once i click switch off the screen turns blue and displays the fedora emblem in the centre. At the top right text says "Shutting Down" but at this point the system hangs.
I have had Xp on my pc for a number of years, and have just installed Ubuntu as a dual boot os. I had a bit of trouble installing GRUB, but that's been resolved. My real problem is that now, after reinstalling GRUB, windows crashes at shutdown with a blue screen, as follows.
Code:
0xc0000021 {Fatal system error}
Windows logon process system process has unexpectedly terminated with a status of 0x0000000
The System has been shut down
we have installed centos in our organisation on vitual box.it gives display only in the middle of screen.i want to set it on full screen. when i select full screen option the back black screen become full but the display is same. how can i adjust it on full screen?
View 2 Replies View RelatedWhen I start ubuntu, memtest86+ work to testing memery... Nothing else show up.... just blue screen with testing. I can't log in to ubuntu I don't no how to fix that I tried to use live cd to edit grub, but no grub at all. maybe because i do something wrong from this answer: [URL]...
[code]...
I have a Toshiba NB305 on which I've installed 10.04 and then 10.10. I set it up to dual boot windows, but windows has never booted. I get a quick blue screen, and then it goes back to the grub menu. Ubuntu boots just fine. I occasionally have reason to boot into Windows. So it would be nice to get it working. Here's the output from boot_info_script.
[Code]...
I have tried dual booting Ubuntu 9.10 and W2K two times and this has resulted in a blue screen of death in the Windows partition. I have subsequently had to wipe Linux and restore Windows using fdisk/ mbr.
The MBR was set to hd0, but should this be installed on the Linux or Windows partition to prevent this?
After installing Fedora 15 from LiveUSB and rebooting it just hangs on a black screen with a blinking cursor (underscore) in the top left of the screen. If it's reached grub, it isn't responding to any commands, and mashing several key combinations (such as ctrl-alt-f1) will produce a beep usually emitted only by the BIOS (hinting that it may never be making its way to grub).
The only particularly interesting thing about the install is that by default it wanted to boot itself from the MBR on my primary-master (Windows) disk. Instead I selected the option to boot from "the first partition in sdb1", which is my primary-slave (Linux) disk, (the first partition being /boot). This way I can change which OS boots by changing the boot order in my BIOS, and so avoiding bootloader wars.
I have those notifications bubbles that appear right and top of my Screen.
Besides being RIDICULOUSLY big, i don't need them
I don't know if it is the same, but they look like this:
NOTE THIS PICTURE IS JUST AN EXAMPLE I FOUND ON THE INTERNETS - I WANT TO DISABLE ALL NOTIFICATIONS
On fedora 12, I could make my EEE PC 1024x600 display pannable by using xrandr:xrandr --output LVDS1 --mode 1024x600 --panning 1024x768...Everything worked. After upgrading to Fedora 13, the bottom panel bar is in the old position, and over any windows that extend below line 600.Is there something I need to do to get the panel bar to go to the bottom of the screen like it did in Fedora 12?
View 2 Replies View RelatedWhen i try to install Fedora 15 on a clean machine it freezes as soon as the pixelated load bar with the white, light blue and dark blue colors show.
I have tried several different versions of Fedora (64bit and 32bit) and have tried to burn it to a CD and/or DVD (For the larger version) and copying it to a usb pen with universal linux usb, liveUSB creator (from Fedora) and last one i don't remember the name on.
I have a Compaq CQ40-616TU Laptop. I have installed fedora 11 64 bit more then 20 times and facing the same problems. The Problems are
1) After booting into the fedora it get hanged up and blue screen with the logo of fedora.
2) Some time it shows message that "Could not update /var/lib/gdm/.IC Eauthirity"
3) I have also updated through yum but still facing the same problem
4) I have also tried fedora 12 but during installation process it shows message that no suitable hardware found.
After succesfully installing Ubuntu 10.4 x32 and rebooting pc hangs on black screen with a flashing white dot in the top left corner of my screen, i've tried installing it twice with the same results.
my setup is: Asus p5q-e,
4 gig of corsair dual ram,
ati 4850 graphics,
onboard audio.
ahci mode
win 7 installed on intel ssd, and xp on a samsung 320 gb sata 2,
i had this configuration running fine for 2 months without boot loaders,
on pc start up i choose from which hdd to boot from.
i installed ubuntu on the samsung drive where it was recognised fine, wiped it all and installed automatically.
pls let me know if there is anything i missed, and advice if possible in what to do.
thanks
kannanni
Tried to install fedora on new laptop, boots up to blue screen but no top panel or launcher
View 2 Replies View RelatedIn Fedora-14, how do I set the start-up screen to solid black-splash instead of the light-blue?
View 1 Replies View RelatedI installed Fedora13. But my Windows is Gone. I followed Next-->Next and completed installation after 1 hour. When i restarted the system, isaw blue screen something called grub and windows is not listed. I had important data in it where did it go?
View 14 Replies View Relatedwhen I press sound +/- button of my keyboard this gui thingy appears on the middle of my screen. Its transparent black, there is a speaker icon on the middle of it this thingy; [URL] ps: I don't want to kill or close it, I just want to know what is it. Which process which software and how can I hack it
View 2 Replies View RelatedI'm running Ubuntu 10.04 and a small Windows 7 partition (cuz I can't get Ubuntu to run my MSI TV@nywhere plus card but that's another issue).I can log into Windows fine. If I choose Ubuntu, however, the boot process will go thru a few screen flickers. Then one of two things happens:1) I get a scrambled up pixelated image (not sure what it is) for about 3 second, then it goes into the login screen and I can log in normally.2) I get the scrambled up pixelated image and it hangs. This happens about 4 times out of 5 when rebooting.
I do have an nVidia card and a beta driver (they published it the 21st, I believe, of this month) but this happened long before that. It's happened ever since I installed any of the drivers (I've tried a couple different versions, hoping to fix this) for my card.
My system is a frankenputer:
Phenom II quad core 3.0 cpu
nVidia GeForce BFG 6600
4G DDR3
500G drive
Note: I do have 3D rendering when I finally get into the desktop. Everything works great, except that when I'm playing my mmorpg, Regnum Online, it freezes the entire computer and I have to reboot (not sure if that has anything to do with it or not).In case it's needed, this is my grub:(Second note: I'm sorry for the length of the post but I don't know how to upload documents/files to show)
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
[code]...
Ive recently built a music server with the following configuration:
AMD Athlon 64 X2 5200 processor
Gigabyte GA-MA74GM-S2 Motherboard with 2GB ram
Western Digital Caviar Green 1TB SATA Hard Drive
Samsung 22X CD/DVD Burner IDE
I would like to be able to run Fedora 10 (and Vortexbox, an application to burn and store CD�s) but have been unsuccessful in getting F10 to load. I am a novice Linux/Fedora user. I've been able to load and run Windows XP on the server with no problem. I have downloaded and verified both the x86_64 DVD and the x86_64 Live CD from the Fedora website. With the live CD, the last thing that appears before the screen goes blank and the install freezes is the blue line changing to white. I have tried several different SATA configurations , have turned off all non essential options in BIOS(ethernet, USB support), and have tried loading with fail safe bios settings.
I upgraded my lappy to FC10 and I boot to console mode. The blue sun image comes up there, I can get rid of it by hitting escape a couple of times but I want to disable it completely. It's messing up my desire to boot with the framebuffer.
View 1 Replies View Related
