When i type vi /etc/network/interfaces, i get a blank screen with blue dashes on the left side. "/etc/network/interfaces/" [New DIRECTORY]. I am running Ubuntu 11.04 server and am trying to set static ip. I found a work around but why is this happening?
View 9 RepliesI am rebuilding my server with Centos 5.3 and is using a RocketRAID 1740 card. Pop in the Centos DVD, which I have used on my other installs. I typed in "linux dd" to allow me to install the RocketRAID drivers. After selecting the drivers and skipping the test for the media. The screen would be just blue and no progress was seen. I left for hours... and still nothing happens..
View 3 Replies View RelatedIve recently built a music server with the following configuration:
AMD Athlon 64 X2 5200 processor
Gigabyte GA-MA74GM-S2 Motherboard with 2GB ram
Western Digital Caviar Green 1TB SATA Hard Drive
Samsung 22X CD/DVD Burner IDE
I would like to be able to run Fedora 10 (and Vortexbox, an application to burn and store CD�s) but have been unsuccessful in getting F10 to load. I am a novice Linux/Fedora user. I've been able to load and run Windows XP on the server with no problem. I have downloaded and verified both the x86_64 DVD and the x86_64 Live CD from the Fedora website. With the live CD, the last thing that appears before the screen goes blank and the install freezes is the blue line changing to white. I have tried several different SATA configurations , have turned off all non essential options in BIOS(ethernet, USB support), and have tried loading with fail safe bios settings.
I have been trying to set up Ubuntu server 10.04-2 and am a couple issues.
One issue is that the network interfaces aren't starting properly. I have to start them manually. I've tried to edit the /etc/network/interfaces with the following.
Code:
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
[Code]....
Once I select Ubuntu 9.10 from Grub, it shows the logo, the logo disappears, a jet black screen shows with 2 horizontal white dashes appear at the top.
I recently uninstalled Firefox 3.6 pre using synaptic to go with the stable Firefox 3.6 installed with the PPA repository that was given in the Ubuntu wiki. It installed and ran fine but when I rebooted, ubuntu wouldn't start.
I went into recovery mode a few times, tried to fix any broken packages and when it said it was fixed, I tried rebooting and the same error occurred. I also tried to use dpkg-reconfigure for the xserver-xorg and then ran startx but x didn't load properly. Some more debugging and a few driver errors came up involving intel so I installed a package which fixed that.
Ran the dpkg-reconfigure again and ran startx. This time x loaded but it was a jet black screen and I had to hold ctrl + alt and hit a few F keys to get back to the prompt.
I understand this could be a xulrunner error so I tried reinstalling xulrunner-1.9.1. I also rolled back my repositories to get the Firefox 3.5 branch and I installed the original Firefox 3.5, ran firefox --version to make sure and I finally have that back installed.
I tried rebooting and running the OS normally, but again it failed at the same point. What exactly should I do next? Yes, I could reinstall but it's such a small problem with maybe 1 or 2 broken packages, is there anyway I can save my current ubuntu system (as I have made countless configuration changes months ago and I do not want to do it again)?
how to edit and save this file using Vim-noX. (connected via putty) I have the file loaded up and Ive inputed the needed data for my static IP, but I cant for the life of me figure out how to close and save my settings. At the bottom of the command line I have "INSERT" which toggles with "REPLACE" and I just cant figure this out.
View 2 Replies View RelatedI'm building up a server based on 8.04 LTS. It's using OpenVZ, and as part of that it creates a virtual network interface venet0. I add a stanza to /etc/network/interfaces that looks like this:
Code:
allow-hotplug venet0
iface venet0 inet static
address 10.53.35.1
netmask 255.255.255.0
[Code].....
Looking further, I note that /etc/init.d/networking is not symlinked into anything other than the rcS.d directory. It's been a while since I've been tinkering at this level, but I understand that there should be a symlink from rc2.d/Sxxnetworking into ../etc/init.d/networking. So I wonder where eth0 is getting configured.
Last night I created a fresh install of Ubuntu Server 10.10. I was working through a tutorial to set up a development server for home use, and everything worked perfectly. I was able to install OpenSSH, Apache, MySQL, and PHP (and Vim) with no problems. I was also able to use "ifconfig" to determine the network address of the server and I was able to view web pages on the server from another machine on my home network, using a browser. So, everything was "peachy". [By the way: The server is connected to the router using a CAT5 cable. This is a WIRED connection] I shut the Ubuntu server down at the end of the night and, now that I have rebooted this morning, I have apparently lost the network interface. I cannot ping anything from the server. If I run ifconfig, only the "lo" configuration is listed, with the 127.0.0.1 address.
[Code]...
If I try to add a new interface (eth1) to /etc/network/interfaces, I get
Code:
* Reconfiguring network interfaces... SIOCSIFADDR: No such device
eth1: ERROR while getting interface flags: No such device
SIOCSIFNETMASK: No such device
[Code]...
How do I add 2 interfaces and get anyone of them to work, as available ?
I am having the same problem, as soon as X tries to load my screen just goes blank. I have an ATI Radeon 9550. At first I tried switching between VGA and DVI as well but upon ruling that out, I switch to my on-board video card and that is working thus far, but I'm trying very hard to figure out a way to be able to switch back. Anyways I'll check back in later on if I have any new information I will post.
View 3 Replies View RelatedI have an old pentium 4 with an ati card agp. 320mb ram. just for testing. i followed all the screen instruction and everything was installing well. then it say , remove cd and press enter to restart. i did. now it boot up fine , but at the end just a blank screen.
View 7 Replies View RelatedI've installed Ubuntu Server 11.04 64-bit on an HP Proliant Microserver. The install seems fine but I'm having a start-up problem. When I boot the server, I get a blank screen after the Grub Menu. If I press ALT-F2 I get the login prompt. I've tried editing the grub file (after having done some googling) and tried adding nomodeset to the following line in the grub file:
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset acpi_osi=Linux"
I added nomodeset as well as acpi_osi=Linux to see if that would do somethng. After adding nomodeset, when I boot the server, I still get a blank screen after the Grub menu but this time a blinking cursor. Again, if I press ALT-F2 the login prompt shows up. So it boots (I'm able to putty/Webmin in even when the screen is blank) but don't know why I need to press ALT-F2 all the time to get the login prompt to appear. Plus I don't see the boot process right before the login as well.
HP Proliant has the following chipset and processor:
- AMD RS785E - north bridge, core logic controller
- AMD SB820M - south bridge
- AMD Athlon II NEO Processor 1.3 GHz Dual Core
I've also tried adding xforcevesa instead of nomodeset and that option too leaves me with a blank screen.
I might want to try and put a gui on my ubuntu server installation went fine however now I'm staring at a blank screen. ubuntu boots goes to screen similar to desktop (loading with the mouse cursor) and then blank... occationaly it'll load a partial username box but more offten than not it loads a completly blank screen and the caps lock and scroll lock lights on the keyboard are both blinking consistantly...
View 1 Replies View Relatedtrying ti install ubuntu server 10.04 64bit server edition.Ok so I have been using the desktop version as an internal server at my home office.Decided to give the server edition a try. Now when I start the installation I get the language choice, then I choose install and then my screen goes blank and nothing happens.
View 3 Replies View RelatedWhen i use my computer (whether it's going online, typing, playing a flash game, or coding) I get these "Black Flashes" that are becoming longer and more frequent. A "Black Flash" is when my computer screen turns blank (but you can still see the backlight) and i have to press the NUMpad ENTER button, shake my mouse furiously, or click my mouse, which sometimes causes undesired actions, but gets me my screen back. sometimes the Black Flashes last a milisecond or 5 seconds or i have to hold the power button and restart because it won't come back on.
Specs:
Toshiba P205-S6337 Laptop
Ubuntu Karmic Koala
2.39 GB of RAM
[Code].....
I created a USB stick with Ubuntu 9.10, used it to boot a dell Inspiron 1550 laptop which has WinXP. I tested 9.10, everything went fine out of the box so to speak. But when I went back and tried to boot XP again I got a blue screen. XP starts in safe mode and no apparent problems are detectable but it will not start in Win normal mode anymore.
View 8 Replies View RelatedJust upgraded to 10.04. Screen is now unusable. It's like looking at it through a blue filter. It seems to be averaging the brightness. if there is a large dark area of screen real estate the paler sections getbrighter.The very bizarre thing is, if I switch user, whilst the theme is different, the brightness problem is gone...
View 1 Replies View RelatedI esablished a dual boot with Windows 7 and Ubuntu on separate partitions. Then, as I realised that Windows 7 was rubbish and Ubuntu annoyed me by losing wireless connectivity after an update, I decided to go back to Windows XP for a while. So I did what I probably shouldn't have done, and formatted the partition (or so I thought) with Ubuntu on, using Windows.
Now, on booting up the system, all I can get is the Grub Rescue prompt and nothing in the Bios menus seems to be of any assistance.
I've tried booting XP from a CD, but a blue screen error always occurs at the same point in the installation. I wonder if I should make a CD/external drive with Ubuntu on, reinstall it, and go from there?
Using Fedora 10, can anyone tell me how to setup the network scripts to create two network interfaces for vlan x and y. Both interfaces should obtain an ip from dhcp and both interfaces should run over eth0.
View 2 Replies View RelatedI've not found how to configure more than one ip address with network manager.Nor with kde nor with plasmoid network manager.I need several virtual ip addresses for eth0 when the "default" of eth0 is connected i.e. "Connected to Auto eth0" should initialize the virtual interfaces.I have not found no even how to configure the ip address.I think this will be used from ifup config in yast or not?There I have the virtual interfaces but they are not taken from network manager.And last but no least: Is it possible that when using network manager the eth0 is enabled even no user has logged in?
View 4 Replies View RelatedCan anyone tell me how to setup the network scripts to create two network interfaces for vlan x and y. Both interfaces should obtain an ip from dhcp and both interfaces should run over eth0.
View 4 Replies View RelatedGNU bash 3.1.17. I say there must be, in bash, a keystroke combination that does this: I type say, two words at the prompt. Then I press HOME. And now, holding down some control key, I press a key that erases from current cursor position up to the first blank (the space between the two words). If I am right, which is the key combination? You could as well refer me to the bash manual section where the different combinations, one of them a control key are listed.
View 2 Replies View RelatedWhile I was trying to install a package in the package manager I accidentally removed a package that I am not aware of.I got a crash report telling me to enter something along the lines of a broken package repair mode. The next time I started my computer it froze at the blue screen with bubbles after login.Is there a way to access the gui using a recovery/rescue type mode so I can access the package manager, or is there a way to find and reinstall the vital package?
View 3 Replies View RelatedI deinstalled Ubuntu today. Just deleted the partitions etc and thought it would be fine, but now this weird grub thing is telling me:
error: no such partition
grub rescue>
I am at the end of my wits: I downloaded a liveCD, which will not boot. My XP cd boots but gets a blue screen afterwards I downloaded a windows 7 live cd which did not help either
Problem is, I can't load my bios anymore to change the boot order... Didn't even know Grub was part of linux...
Point is, I got a presentation tomorrow and all my important files are on that laptop. . . the setroot=(hd0,0) gives no response. I tried a bunch of other commands but I keep getting unknown command...
I have had Xp on my pc for a number of years, and have just installed Ubuntu as a dual boot os. I had a bit of trouble installing GRUB, but that's been resolved. My real problem is that now, after reinstalling GRUB, windows crashes at shutdown with a blue screen, as follows.
Code:
0xc0000021 {Fatal system error}
Windows logon process system process has unexpectedly terminated with a status of 0x0000000
The System has been shut down
Everytime I shut down my netbook the blue Kubuntu Screen comes instead of the Red Ubuntu Screen. I don't want the Blue Kubuntu Screen, I want the RED Ubuntu Screen. How do I do this? I tried installing KDE and KDE for netbooks, and KDE default settings (all from software center). What else do I need to do to get rid of this blue screen?
View 2 Replies View RelatedI tried Kubuntu for few days.now I removed kubuntu using remove kde desktop,autoremove commands.Everything is fine.I also selected gdm,removed kdm.Now I dont find Kubuntu in options in the login screen.I also removed all kubuntu applications.But now when I turn on and off my computer, I find blue kubuntu screen.why is that happening even after removing kubuntu?did I do some mistake?How to remove it?
View 2 Replies View RelatedWhen i try to install Fedora 15 on a clean machine it freezes as soon as the pixelated load bar with the white, light blue and dark blue colors show.
I have tried several different versions of Fedora (64bit and 32bit) and have tried to burn it to a CD and/or DVD (For the larger version) and copying it to a usb pen with universal linux usb, liveUSB creator (from Fedora) and last one i don't remember the name on.
I just installed Ubuntu using Wubi and I am having problems with it. I am running an x58 Rampage II Gene with a radeon hd4850. I'm using a polaroid tlx-04240b hdtv for my monitor. After installing via wubi when I select ubuntu from grub I just get a blue screen that says no signal. I had the same problems before when I tried installing ubuntu and I finally gave up after messing with it for a while. Anyhow I finally started trying to figure it out again and I am brand new to linux so i really dont have a clue what to do here. I'm about 70% sure the problem is just the resolution being to high or the proper driver not installed but as i said I've never successfully used linux so i just dont know how to fix it.
View 7 Replies View RelatedWhen I start ubuntu, memtest86+ work to testing memery... Nothing else show up.... just blue screen with testing. I can't log in to ubuntu I don't no how to fix that I tried to use live cd to edit grub, but no grub at all. maybe because i do something wrong from this answer: [URL]...
[code]...