Before I had to re-install, because I ran out of space on my partition and could not grow it, I had a setting that would not show the selection screen for the different kernels at start up.
Does anyone know how to set the start up as such that the selection screen does not show?
Ubuntu hangs at start up.Im running 10.10 from a wubi installation - without any problems since. Now, I select the kernel, do ENTER, then I get the blinking big dos-like cursor (still normal)but when it should show the list of "checks".( I dont know how this is called where it checks services, battery state and comments everything with [OK]) it suddenly hangs. All I get is a small blinking cursor, but not more. I need to power down and turn my computer on again, then it usually works.
View 4 Replies View RelatedYesterday I upgraded my Ubuntu 10.4 to new version 11. In during installation I don't really remember which option I choose for installing Ubuntu root direction, but after installation completed computer asked for restarting. I restarted computer, and after I restarted the computer, computer should bring up Menu to choose Windows Or Linux, but this time automatically after a few second screen turn black and than Ubuntu show up. But I don't want that because I want choose Windows, and now I don't have any Idea how should I bring the Menu back.
View 3 Replies View RelatedI have set the kernel selection time out to 3 seconds. However, sometimes it just hangs indefinitely on the kernel selection screen until I manually select the kernel. This is bad news since it is a VM started up from a script and _has_ to start automatically. The VM is a re-constructed cloud backup made by rsync and re-running grub.
Is there any way to force Ubuntu to NEVER, under any circumstances, not time out on kernel selection.
I am currently running 9.10 ubuntu (gnome). I have a dual core intel chip at 3.00 ghz. My mobo is an ASUS P5ND2-SLI. My mobo will support up to 8gb of ram. Now, as we all know, 32-bit os/kernel will only support like 3.2gb, and 64-bit like 4gb. I'd like to install a pae kernel so I can get the most from my mobo, but honestly, I don't have a clue where to start looking for a pae kernel. I'd like to be able to select it from the list that already appears after the grub loads, and if I like it, be able to remove the rest from the list, or just make it default.
Question, in CPU-G, it says my architecture is i686. I don't know if that's the os/distro, or the kernel itself. it also lists the GCC version as 4.4.1 and Xorg as 1.6.4. my current kernel is Linux 2.6.31-22-generic. Again, I'm trying to find a pae kernel, but I don't know if my os/distro will make a difference, if the architecture is the kernel or os itself. I am still fairly new to ubuntu, and I must say, I've made the switch completely from windows.. which blows...
I locked the screen, came back, typed the password, screen remained black, though cursor was visible and moving. Nothing I could do to rejuvenate the screen. Had to switch to tty6, sudo shutdown -r now. Then, on reboot obtained kernel selection, it proceeded to displaying kernel messages, but froze on sdb, after 3 secs. I figured it was the usb, so turned off, removed usb cables to external hard drives, but again it froze saying something about firewire mouse, the mouse is also usb. I tried several times, but no matter what kernel I chose, I couldn't get it to boot. So I loaded puppy live cd, but now it can't access some parts of the disk. I was running utorrent and the folder with partially downloaded files can be accessed but there's nothing there (there was), and some folders can't be accessed at all.
View 2 Replies View Relatedinstalled Python 2.4 and then removed already present Python 2.6. After restart, when i selected the working kernel, that white ubuntu symbol splashed and screen went black with two small lines at the top.. it doesnt go beyond that. Please help me. I tried selecting other kernels. It did not work. I used "nomodeset" by editing the the kernel at the grub..
View 1 Replies View RelatedHow can I change the behavior of the selection buffer or a program that uses it ( I have xclip) to not send me text until the mouse button is released while clicking and dragging? This causes havok in the software I'm developing that tries to make use of the selection buffer. I need the full selection, not bits more bits more bits and then the full selection.EDIT: I cannot listen for mouse events such as button release outside of the GUI of my program.
View 2 Replies View RelatedI'm new to ubuntu and I wanted to setup a headless server (Asus Hummingbird, 2GB RAM, Ubuntu Server 11.04). The installation was successful but: After I tried starting my server without any connected monitor, the server did not start -> I run into a kernel panic (if I connect the monitor after a while I can see the messages on the screen, Keyboard lights flash...). What do I have to do to get the machine running without any monitor? My second problem is, that the Network is always powered down on system power down -> no WOL is possible. Is there an easy way of enabling the WOL function? I tried several things from different tutorials but nothing worked...
View 3 Replies View RelatedWhat is the best way to begin troubleshooting startup problems after kernel update to 2.6.31.12-174.22.fc12.x86-64? Since updating, I am experiencing frequent system hangs at startup.
View 5 Replies View RelatedI have this kind of error:
Code: Select allr@prime:~$ systemctl status systemd-modules-load.service
● systemd-modules-load.service - Load Kernel Modules
Loaded: loaded (/lib/systemd/system/systemd-modules-load.service; static)
Active: failed (Result: exit-code) since Чтв 2015-08-20 08:07:38 EEST; 13min ago
Docs: man:systemd-modules-load.service(8)
man:modules-load.d(5)
Process: 150 ExecStart=/lib/systemd/systemd-modules-load (code=exited, status=1/FAILURE)
[Code] .....
I seem unable to get an nvidia driver working properly after upgrading to the latest kernel with Fedora 11.Here is my laptop and its specs: http://h10025.www1.hp.com/ewfrf/wc/d...reg_R1002_USEN[URL]I've tried both the kmod and akmod unsuccessfully. Everytime it gives me a black screen on boot, I can fix the problem by popping in the LiveCD, and changing the xorg.conf file back to the backup.Here are the errors/warnings from my boot.log file:
Code:
WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
Checking for module nvidia.ko: [60G[[0;31mFAILED[0;39m]
[code].....
I just updated to kernel 2.6.35.13-91.fc14.x86_64, and I'm now having a weird issue where my computer will hang during startup and shutdown unless I move the mouse around.
While moving the mouse, it will boot up or shut down normally. Once i stop moving the mouse around it will hang (until I begin to move the mouse again).Once fully booted it acts fine..
AlsaMixer by default selects "Mic" as the microphone input for my Toshiba Satellite T115D-S1125 see pic below:
[IMG][/IMG]
I need to select "Mic 1" but as soon as I do the mic is muted in Sound Preferences see below:
[IMG][/IMG]
For a brief moment I can see activity from the input level display and then nothing...I have tried removing PulseAudio and that has worked but I prefer to correct this with PulseAudio installed as it seems to be a simple fix...
Everything was going great earlier today when suddenly, my PC on a fresh boot, gave me a message that said something like "Ubuntu is running on low graphics mode ..". It was running a low res, i think it was 640x480, and gave me some repair options like a. Boot in low res mode for just one session b. Trouble shoot this error etc..There were 3 more options but i don't remember what they were.
i chose "boot in low res just for this one session", but it gave me the same error the next boot. Then i tried troubleshooting, which didn't work (restoring to a backup config was no use). Then finally i rebooted and started Ubuntu in Recovery mode, and i did something like "Fix broken packages" because , from the list of options it seemed like the only one which would help at that time.
But now, whenever i choose the Ubuntu option after starting my PC, it just restarts my computer. My other OS is Windows 7 which boots just fine. Hope someone can help me with this . In the meanwhile i'll try making a new MBR or something.
I'm ready to push the button on this baby right now - I just need to know which selection in that drop down list will lead me to being able to make the ext4 filesystem. Picture attached.
View 9 Replies View RelatedI can't seem to login into ubuntu this morning. I'm using 11.04 64 bit. It's been working fine for a few weeks, but this morning I select my name with the mouse and it just returns to the same initial screen after a millisecond. The password box does not come up.
The last thing I did yesterday was add another user - would that have caused any issues (or a red herring)?
I went to a terminal and deleted that user (sudo userdel -r <username>) but that hasn't helped.
My ubuntu does not allow cursor selection, under system-preferences-cursor selection, the windows pops up but when I choose a particular cursor type, it does not take effect.
View 4 Replies View RelatedI mistakenly removed hardware driver selection tool with some packages of nvidia driver. Can anyone tell how to get hardware driver selection tool back again in system->administration?
View 1 Replies View RelatedI have been trying for a couple days now to install 10.04 on a 250G hard drive that was a USB boot with 9.1. I want the hard drive in the case. The bios has been changed and does see the new drive. Boot selection has been changed to CD Rom. Everything starts out fine until step 4 of the install, Prepare partitions. There is no hard drive available on this step. The HDD is not seen by the disk utility either.
View 6 Replies View RelatedInstalling 10.10 RC dual boot with Win7. Is there no place in the installer to specify where Grub will be installed? I don't want it installed in the MBR I want it in the partition with / (I usually only create two partitions for Linux / and swap). I prefer to chain load grub from my windows bootloader.
View 4 Replies View Relatedi install ubuntu though wubi and it worked kind of. It asked me to restart at the end so i did and when it was startaing up it didnt show the option to boot into ubuntu.
View 9 Replies View RelatedI've tried to find it on google, but I want to have my OS Screen Selection to have a cleaner look than what it currently looks like. I understand we can edit Grub 2 but nothing I've found shows me what to edit into the file. I have all of the files I just need to know which one to edit and what to put into the file so my OS selection looks better
View 2 Replies View RelatedCursor Selection not working in Ubuntu Ultimate,the pop up windows shown, there are different mouse cursors to choose, but there is no icon to click OK to select it,
View 2 Replies View RelatedI've had a Centos 5.3 zimbra mailserver set up for about 3 months now.Every 7-10 days or so, the system will do a kernel panic and I've been putting off its resolution due to other matters.I'm now ready to look into it but I have two issues :
1) No logs.
So far, I've manually rebooted when a kernel panic occured and could look at the panic printout and write down relevant info. But since I wanted more info than I had written down, I went hunting in the logs for the kernel panic event (one happened earlier today) but, to my surprise, I noticed the system doesn't log the kernel panic at all. Kdump is currently disabled as I'd like to keep all available memory available to the system but I was under the impression it would log the kernel panic message regardless but would simply leave out more advanced diagnostic information.How would I make sure the kernel panic is logged so I can have more info about it ?
2) The actual panic.Here's a snippet of what's appearing when the kernel panics :
EIP c0467136 page_remove_rmap+0x66/0xc0 SS:ESP 0068:c3ca6ddc <0> Kernel panic - not syncing: Fatal Exception
I've also seen f793bee4 instead of the highlighted part above but everything else is always the same from the times I've seen (as I haven't always had the chance to be around when a panic occured).I'm looking further into it at this point but early research seem to indicate this could be a memory issue. I'll run memtest next weekend to check that out (since I don't want to take the system offline for any length of time during office hours) but people here might have other theories based on what I've put up so far. The system has all of the latest patches and updates and is running only what I need as far as software goes (zimbra server + prerequisites, x + GNOME (not loaded on startup), firefox and vnc for windows RDP access). My system also uses a software RAID1 array (boot = md0 and / = md2 with swap files not being mirrored as there's no need to).
PS : In order to further troublehsoot by myself before posting here, I've tried to enable kdump to see if kdump is the culprit for the missing logs but I'm also having an issue with it. I'm getting a "No kdump initial ramdisk found" and "mkdumprd: failed to make kdump initrd" messages at startup. I'm thinking this might be because of my raid array ? I've found an old bug report regarding one of those error messages on centos 5.2 but it was supposedly fixed in the 30 version by RH and I'm using the latest one (56).
I downloaded the Ubuntu ISO file and burned it to a CD-ROM. Booting from the CD on my laptop I select the language and selection screen appears with all the F1-F6 options below. I've tried all the selections and options through the F keys but that's as far as the install will go. My laptop is a Dell and it's only 3 years old with plenty of memory and HD space.
View 3 Replies View RelatedFinally got a dual boot on this laptop the way I liked it (LOVE my Win7, really like UBUNTU for certain things like getting booted and on the net fast...great). As I was editing and rebooting the GRUB settings UBUNTU got it's updates and installed (including one on GRUB that I hadn't seen before - WITH WARNINGS). Now I can't seem to get this last entry out of the boot menu: vmlinuz-2.6.31-14-generic. It has all this listed now (had dual entries for everything like mem test before):
vmlinuz-2.6.31-17-generic
vmlinuz-2.6.31-14-generic
Windows 7
I got rid of the extra entries like memtest and all using: sudo chmod -x /etc/grub.d/20_memtest86+ and such variations..still though I got one stuck in the boot selections. It won't remove the old linux vmlinuz-2.6.31-14-generic build entry from GRUB (and they both point to the same place). It has a -14 and -17 entry in it now. Like I said both load to the same mount point.
I mean I removed like five extra entries from GRUB using that command after the update (and had done it before about two months ago) but the linux vmlinuz-2.6.31-14-generic selection won't leave the GRUB selections now. I really thought I had it figured out to the bomb having my laptop dual booting before, just didn't like how UBUNTU used my disk space by default last time so I decided to rebuild the laptop.
I have Ubuntu 9.10 64bit on an AMD dual core proc with 4Gbt RAM
I have installed XBMC from instructions here...
http://wiki.xbmc.org/?title=HOW-TO_i...n_step-by-step
I got as far as...
""XBMC is now installed and ready for use."", re-booted and loaded program.
It loads OK but I cannot access/select the menus because the mouse pointer bears no relation to the mouse and the keyboard is no help either. Both are incredibly Slow!
First let me describe my system setup. I have windows, ubuntu 64 and ubuntu 32 present. I upgraded the 32 bit version to 10.4 with no problem. After upgrading the 64 bit version is when the problem occurred. I believe it has to do with the grub.cfg file. When I would choose the 64 bit version the screen would just go black, no furthur action. After making a few changes to the 64 bit selection in grub.cfg i come to a screen that says c to continue, s to skip mounting, and m for manual mount. Pressing s gets me in. Here is a copy of my grub.cfg.
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
[Code].....
I recently went the upgrade route and something went wrong either with the download or the installation or 10.04 and my hardware are having issues. I am looking for some advice for either fixing what is wrong or getting some additional data backed up to USB before wiping the partition and starting new.
My computer is dual-boot using Grub2, the other OS being Windows Vista. I can get to Windows Vista fine via GRUB. When I select Ubuntu (says kernel 2.6.31-21) though I don't get very far.
At this point I can get 10.04 all the way to the user selection screen, where it immediately freezes, forcing a hard reset. I can boot into recovery mode, but if I select failsafeX it freezes at the first screen that comes up--the notice you are running in low res graphics mode.
When I did the upgrade from 9.10 to 10.04 I used the update tool in Ubuntu. However I also now have a 10.04 install CD.
My graphics cards are twin NVidia 9600s in SLI. I would say it is a graphics card problem since the first graphical screen that comes up both in regular boot (the login screen) and failsafeX (the notice screen) I get a hard lock. However booting off the CD it loads the desktop just fine!
I would just wipe clean however my last data backup was partial and there is some stuff I would like to go back in and get. However neither method I have used to try and go back in to get what I need has succeeded. I have a 320G USB drive I use for backing up certain data. If I boot using the CD, it gives me an error message about the isntaller then goes to desktop (which works fine, even though I can't get past the login screen when booting 10.04 from the hard drive) I can then plug in the USB drive fine and it shows up, but some of the files on the Ubuntu installation don't give me permission to copy them. There is an 'X' on the icon and I don't know whether there is a way to get me authenticated in order to copy them from the CD desktop.
Alternatively, I can get to a root prompt if I boot into recovery mode (not the CD, just recovery mode from GRUB). I assume I can move them from there and that the permissions issue won't be a problem but when I plug in the USB drive I don't get any errors but I am not seeing it show up in /media. Also if I put a DVD-RW (all I have on hand) into my DVD-RW drive maybe I could back the data up to that, but I'm not familiar with how to do that from the command line.
If I could get to a point where I could verify that I have this extra bit of data backed up then I wouldn't have any problem wiping the partition and starting over.