I was wondering if there is a way to know which files are in the linux page cache. I've searched but the only thing I've found is meminfo.Is there anything out there that can give more details regarding what is being cached?
View 2 Replieswhile i realize it's certainly taboo to download a lot of videos videos and similar without permission, and possibly illegal in some countries due to copyright, i have also been reading that the video is clearly buffered in the page casche, so technically is stored on your machine already, but is only stored in ram. how can i save it from my firefox page casche? some mitigating info is that i have poor web speeds, and an old machine, which is not using all of the 1gig of ram for some reason.
View 4 Replies View RelatedI don't understand this error nor do I know how to solve the issue that is causing the error. Anyone care to comment?
Quote:
Error: Caching enabled but no local cache of //var/cache/yum/updates-newkey/filelists.sqlite.bz2 from updates-newkey
I know JohnVV. "Install a supported version of Fedora, like Fedora 11". This is on a box that has all 11 releases of Fedora installed. It's a toy and I like to play around with it.
I was laughing about klackenfus's post with the ancient RH install, and then work has me dig up an old server that has been out of use for some time. It has some proprietary binaries installed that intentionally tries to hide files to prevent copying (and we are no longer paying for support or have install binaries), so a clean install is not preferable.
Basically it has been out of commission for so long, that the apt-get upgrade DL is larger than the /var partition (apt caches to /var/cache/apt/archives).
I can upgrade the bigger packages manually until I get under the threshold, but then I learn nothing new. So I'm curious if I can redirect the cache of apt to a specified folder either on the command line or via a config setting?
I installed squid cache on my ubuntu server 10.10 and it is work fine but i want to know how to make it cache all files like .exe .mp3 .avi ....etc. and the other thing i want to know is how to make my client take the files from the cache in the full speed. since am using mikrotik system to use pppoe for clients and i match it with my ubuntu squid
View 1 Replies View RelatedI am reading slab allocator, it defines slab cache, i am quite confuse is it same as hardware cache?
View 2 Replies View Relatedi was looking for a way to stop my menus taking a few seconds to load my icons when i first open them and found a few guides suggesting using the gtk-upate-icon-cache command, but with the any colour you like icon theme i'm using (stored in my home folder .icons directory) i kept getting a "gtk-update-icon-cache: The generated cache was invalid." fault i used the inbuilt facility in the acyl script to copy the icons to the usr/share/icons directory and tried the command again, this time using sudo gtk-update-icon-cache --force --ignore-theme-index /usr/share/icons/ACYL_Icon_Theme_0.8.1/ but i still get the same error. i tried with several of the custom icon themes i've installed and only 1 of the first 7 or 8 i tried successfully created the cache.
View 4 Replies View Relatedi am able to try ubuntu and everything works fine until i try to install. the menu comes up to the first page where it tells you to plug in your machine and make sure there is enough disk space and network connectivity. when i hit next on this page the mouse icon changes but the next page never loads. the longest i let it hang there was 2 hours. ive tried multiple times with the same result.
im running from a flash drive on an ASUS Eee PC 1001P-PU17
10.04; 64 bit In Firefox, the size of the fonts varies greatly from site to site. Some are too small to read, others huge. Some headings and menus overlap.Screen size: 1152 x 864
My settings are:
Proportional: serif 14
Serif: Times New Roman
Sans serif: Arial
Monospace: Courier New 14
Can anyone tell me how to name Page up & Page down buttons in global-keybindings to use the custom commands with these buttons?
View 1 Replies View RelatedOn FC11 64 bit with Adobe flash plugin for Linux installed, I see segfault errors from "npviewer" in /var/log/messages. The only browser I have tried yet, Firefox, has glitches every now and then. Sometimes it shows the title of a page in a tab, but the page is blank. This can even happen when I try the Google main page. Is it true that npviewer has something to do with Adobe flash? Is there a way to fix the problem? If it is caused by Adobe flash, is there a different plugin that will replace Adobe flash player?
View 1 Replies View RelatedHow can I find page hit and page miss ratio in linux fedora core 12?
View 3 Replies View RelatedI have a problem printing to my HP printer.
What is my problem? I have a page (one page - text an graphic) to print. When I sent it to my printer it prints OK. When I sent it agian, the output is totally garbled. When I sent it again (a third time) it is OK. Sent it again (4th time) it is garbled. Sent it again ... you get the picture ;-). Alternating good and bad pages.
What is my setup? I run Fedora 14 with Cups 1.4.6. The printer is a HP Deskjet 940C. It is connected to a linksys wireless print server. It is configured in CUPS to use ipp printing. The driver I use in Cups is 'CUPS+Gutenprint v5.2.6 Simplified (color, 2-sided printing)'.
I have apache httpd server on my Fedora 10I got 2 problems:First : I copied the web page files to its Document Root <var/www/html> & Disabled the default web page. But when I visit http:/localhost ，it shows up the list of files in <var/www/html> as if a ftp server browsed in web page. So how can I set http://localhost load my default web page index.html ?Second :I want to set up a web server on Internet through my router . I applied for DDNS account & input it into router correctly . I set virtual host in server to redirect any access from port 80 to 192.168.1.2:80 in LAN . Just for in case , I also download and running the DDNS software & installed it on PC 192.168.1.2 in LAN . My DDNS provider is oray.cn . It's a Chinese server provider . I don't think there is anything wrong with oray.cn . But if you need its information just visit oray.cn (Google can translate it for you). So I want to know did I miss something to set up a web server in this kind of situation
View 2 Replies View RelatedAll has been fine with my emails but today morning when i tried to log on I got an error message "You must be logged in to access this page, go to logon page" I dont understand why even when i supply my correct user name and password.
View 2 Replies View Relatedwanted to know if i can execute commands on linux console through a web page and redirect it back to my web page !For example :if i send a query "ls"it should execute this command on my linux console and also redirect the list of the files to the web page from which i give the command !
View 8 Replies View RelatedI want to combine 4 ps(or pdf) page to single page and for this i have try a2ps command as:
a2ps -4 1.ps 2.ps 3.ps 4.ps -o outfile.ps
Event through it divide the page into four section. But only give one output of my four input. other three section is blank. Is i am doing some wrong or Is their any other command to do so.
Vim: substitute for Page Up and Page Down keys?
View 4 Replies View RelatedWhen I boot slackware, I have all the boot process that run but too fast. I don't have time to read what's running. Is there a way to to go page by page. I didn't find any key in my keyboard to stop and go.
View 16 Replies View RelatedI have a Canoscan LiDE 30 scanner which works fine in Linux. I haven't used it in months, and never since moving from Jaunty x86_64 to Fedora 11 x86_64. This evening I suddenly need to scan two pages to send to someone via e-mail, and the recipient is desperate to receive them. Naturally, Xsane has decided this is the moment to screw me.
The problem: I cannot figure out how to tell Xsane that the page size is 8.5 11. It insists on scanning only the left side, 3.99 x 11. I cannot find a page size anywhere in any of the buttons.
In Preview I once got it to scan the entire page, but could not figure out how to save the image to file. Subsequently I have not been able to figure out how I did it. In any event, scanning from the small main window always scans 3.99 x 11. Adjusting the scan area manually in the Preview window allows me to change the size area in the small main window to 8.5 x 11, but when I then scan from the small main window it reverts to 3.99 x 11.
I have scanned the document a hundred times at least, each time trying different buttons, but nothing has succeeded in getting the full page.
I am running 9.10. I have a HP Photosmart 7350 printer. I have it installed and printing. But the issue I am dealing with is that it will print a full page and then print a blank page..then a full page..then a blank page. Actually they aren't completely blank..it shows half of "2 of 6" or whatever page it is on. Like it cuts that in half and prints the 2nd half of "2 of 6" onto a separate new page.
View 2 Replies View RelatedJust got back to attempting to play with 10.04 using its Live CD. It consistently goes to the "Log In" page and not the Live CD page on running. I saw a Post specifying a F key to be pressed on boot-up to get to the desired starting point some time ago, but did not write it down. Some advice did say press Any Key but this does not seem to do the job. Tried to use the search function here but no joy. Can anyone remember which F key? Note that as a check, I tried to use 9.10 Live CD and this worked fine, so it is not a machine problem.
View 2 Replies View RelatedMy comp is litterly doing nothing, and 61% of my RAM is being used as cache. I don't know if I created a swap space correctly. I loaded up gparted and I see that I do have a 2gb partition labled linux-swap. Why am I completely out of RAM? I have 4gb btw
View 9 Replies View RelatedI've been troubled by the high amount of RAM that is used by my Ubuntu desktop. Before I installed Ubuntu 10.04 (desktop, 64-bit) my system used around 500MB of RAM when no applications were open (just cold boot into the GNOME under 9.10). But when I installed Lucid, I've noticed that my used memory is now reported as 1GB or more as soon as I log into the system.
I want to figure out what is using all the extra RAM but I can't seems to find the culprit. I looked at all of the processes and numbers just don't add up. I exported the list of processes into a file and summed up the memory used by every process in a spreadsheet. The total came to around 700MB. Yet, both System Monitor and "free" reported the time that system was using over 1GB of memory. This means that at least 300MB of RAM are used but not by any process, at least as reported by "ps".
I believe Ubuntu 10.10 has a DNS cache, how can I disable this?
View 1 Replies View RelatedI read somewhere that i can clean cache memory with this comand:
Code:
david@lap:~$ sudo echo 3 > /proc/sys/vm/drop_caches
bash: /proc/sys/vm/drop_caches: Permission denied
The problem is that permission is denied as you see...
Whenever I plug-in my USB 8gb pendrive to copy a large file, it takes eons. Using Ubuntu 9.10 for AMD64. At first it copies a file at high speeds, because it's not actually writing to the USB but to the cache; at 500-700mb, the write cache is full and flushes, *while* still copying the rest of the file. Since the system is trying to access the USB in two different places at the same time, the transfer speed bunks down, often to 200-300kb/s. The final process, instead of taking 2 minutes, takes one hour.
This continues until 1.4gb, when the cache finishes the flush, the copy can continue streamlined and the last 200-300mb are copied again at quicker speeds. I've made a test, copying a 1.6gb file to the USB and waiting for the cache to get full. Once it happens, I copy another file of the same size to the USB at the same time, when it starts copying I cancel the previous copy - cancelling it could take 1-2 minutes, but once it's cancelled, the second copy goes amazingly quick since the pendrive doesn't have any access troubles anymore.
However, that means for the trick to work that I can't copy four 1.6 files to the 8gb pendrive, but only three. The fourth one would need an hour unless I start copying it just before the first three finish so the write cache is still not in use or something like that. So what I would want is that everytime I plug-in this specific USB drive (identified by its label or UUID), the automount parameters disable write caching for this drive. Is that feasible? Using fstab or how?
I'm trying to convert some of my old Pidgin-logs to Empathy's format, and I've run into an issue I can't figure out. The Empathy logfiles contain a "token", which is a sha1-hash of the user's avatar at the moment the message was sent.The avatars are stored (in my case) in ~/.cache/telepathy/avatars/butterfly/msn. All filenames contain the sha1-hash, and have no extension (such as jpg/png). Some avatars uses only the hash as filename, but some has the prefix "_3" before the hash.Does anyone know why some avatars are prefixed "_3"?
View 3 Replies View Relatedpost the code for clearing RAM as cache?
View 2 Replies View RelatedI've been advised to "clear the java cache", and to do so under Windows, one would open the java control panel. Of course, I'm using OpenJDK, and not Java's java.
Can anyone tell me how I would clear the java cache?