I read somewhere that i can clean cache memory with this comand:
Code:
david@lap:~$ sudo echo 3 > /proc/sys/vm/drop_caches
bash: /proc/sys/vm/drop_caches: Permission denied
The problem is that permission is denied as you see...
let me know how to clear cache memory ( RHEL 5.1 ) as it consumes almost 100% physical memory.
View 3 Replies View RelatedIs that possible that SHM shared memory is counted as cache memory on Linux with kernel 2.6.18?If find it really odd since this memory is not file backed, but I have a piece of code that loads data using shm_open+mmap, and it generates an amount of cache memory in /proc/meminfo that corresponds exactly to the amount of shared memory (I load that data from a file but I am using posix_fadvise(fd,0,0,POSIX_FADV_DONTNEED) to ensure this file is not cached and I made sure that it is working as expected). As far as I know SHM memory was not tagged as cache memory with kernel 2.6.9.If it is the case it is really unfortunate since normally cache memory can be considered to be part of the "available" memory since it can be flushed promptly but this is clearly not the case with SHM memory... Is there an easy way to get the total amount of used SHM memory on a system?
View 4 Replies View RelatedI have a small older HP OB6000 laptop with F14 on it and only 10GB of disk.
I've been weeding out a lot of packages I don't need on it to carve more user disk space.
One of the biggest disk consumers is /var/cache/yum. My problem is that even after a yum clean all it still consumes over 450MB.code...
How to run the yum command in non-cache mode. I browsed but didn't get the correct answer.
View 3 Replies View RelatedI am using squid on my cent os 5. The cache directory is almost full.
Code:
# cache_dir ufs /var/spool/squid 1000 16 256
kindly guide me how can i flush or clean the data inside the cache directory of squid using terminal
Ubuntu 10.10
How do I clear the System cache memory.
For the past few days , I am facing problem in opening websites (firefox & Chrome).
I have to restart the laptop and then access the web sites.
I've installed my debian sid about one month ago (first xfce, next gnome) but noticed that it's kind of really slow. The upgrades take ages, launching (and using) firefox takes so much time,... In comparaison to my ubuntu, archlinux (on the same computer) or previous installation of debian there is clearly a problem somewhere.Today I tried to do a "top" sorted by mem usage : 3.5% xulrunner-stub, 2.1% dropbox, 1.4% aptitude (doing upgrade), 1.4% clementine,... nothing terriblebut still I've 2.7Gb or RAM used (more than 50%)
$ free -m
total used free shared buffers cached
Mem: 3967 26851282 0 79 1938
[code]....
i am running Ubuntu Lucid x64 as a fileserver that shares its files via SFTP, NFS and Samba. Currently the hard disks are configured to go to standby if they are not needed. This works perfectly as long as no one browses the shares or my HTPC is running: That one repeatedly looks through the shares for new music or movies. In other words my problem is that the disks are spinning up a lot more often than they should have to. Additionally the spin-up time delays the response time while browsing. Since the machine has a lot of unused RAM i want to tell the kernel that it should keep the directory structure in memory. That way the disks would not need to spin up every time someone browses through the directories.
View 2 Replies View RelatedIt seems that something is causing the memory cache to be cleared when the screensaver launches. Then when moving the mouse or hitting a key to stop the screensaver it takes forever for the already launched and minimized applications to redisplay. I am using the ubuntu classic desktop.
Now time to rant.
Natty has so many bugs it is impossible to work around them all. This memory issue is one of the worst. The dead zone caused by the static application switcher, and the application switcher plugins for compiz (and probably any override redirect window) is another big one. There is not a single window decorator for compiz that works right. I have encountered two packages with binaries that won't even run (emerald and xpdf). The nvidia drivers seem to have issues (this may be related to this memory clearing issue).
Without a doubt more bugs than any other release of Ubuntu to date. I have worked around most of them by recompiling, and etc., but this is a real pain.
This is all aside from the idiotic switch to unity, when it is clearly not ready for release. The general direction of Ubuntu is really starting to look bad. By the way, what is up with the decision to uglify the desktop with gray scale icons (I know this is an old one, but I haven't really ranted on Ubuntu yet).
Looks like I will have to revert to Maverick.
(Ubuntu Linux server, 64-bits)I was troubleshooting a problem with a file (~3.0 GB) which I had just downloaded, but it was failing the integrity test, when I discovered something really unusual.First this is the MD5 of the file after download, which didn't match the expected value:
~% md5sum media.iso
5d74facb904cc1765a468354908a8f34 media.iso
Some time passes, nothing should have changed the file during this time, but when I went to check the file again:
~% md5sum media.iso
a5b97c5016afb39bd67ccfc3fa6ca59e media.iso
This was really unexpected. Since I have a lot of RAM, I suspected this was the effect of caching and something was going awry with it. I decided to retry with the whole file from disk, for my surprise:
~% sudo sysctl -w vm.drop_caches=3 # This linux command invalidates
vm.drop_caches = 3 # everything in the memory cache.
~% md5sum media.iso
2992aa6270f6e1de9154730ed3beedc1 media.iso
I redid it and now it seems to stay consistent, although this still isn't the value I was expecting. Certainly, the contents in memory cache were different from the contents on disk.This is the big problem.To fix the download, I created a torrent on the source machine and opened it in the target machine. Five 1MB chunks out of ~3.0GB failed integrity check. I used the torrent to fix these file chunks and how the file integrity is ok.The problem now is to determine where the data got out-of-sync.
I tested the memory with memtest86+, all but the bit fading test. I was expecting to see some failing memory module, but there wasn't anything. Everything is ok.Filesystem is Ext4, over LVM2, over a 3-disk RAID5 array.Ext4 is considered stable, and if data were inconsistent between disks, mdadm would have warned. But there is nothing in the logs. S.M.A.R.T. error logs are clean, the disks are new (have less than 30 days of "power-on-hours").I'm looking for information about any data-loss bugs in my current kernel (2.6.35), but there doesn't seem to be anything, as far as I looked.what else I could check, or where exactly could be the defect/bug?It is a Ubuntu 10.10 64-bit, Core i7 930, 6 GB non-ECC RAM.
Update: I confirmed that the files are being correctly written to the disk, the pages are being altered after they are read from disk, while in memory. I did a lot more memtests (I left it doing bit fade test overnight),and still nothing. All memory modules seem ok.Some more tests:
~% md5sum media.iso
cc8bcf1ce67ff7704eadc2222650c087 media.iso
~% cp media.iso tmp[code]....(direcat is a version of cat that reads with O_DIRECT, that is, bypassing page cache)There is a clear pattern: it always happens to the 2nd byte in a 16-byte alignment. In that byte, almost always the bit 4 (LSB) flips to one, but there was one instance where bit 2 flipped to zero.
What it's the difference between buff(ered) and cache portions of memory?
Code:
I have a Linux server running CentOS with 2GB RAM. I am searching in google and also in this forum but could not find any luck yet. I am searching the way that we can receive notification by system to a specified email when the memory reached a specified value we defined.
Is there any tool or sort of shell script we set via crontab every minute to check that?
What programs can be used to test and find faulty memory (RAM, Video adapters, cache)?
View 2 Replies View RelatedI'm searching monitoring tools which can listen disks, overhead, cache, memory, cpu performance.Can anybody help me?
View 4 Replies View RelatedWas wondering if anyone can explain briefly the relationship of "cache" and free memory in the "free" memory command.
View 2 Replies View RelatedI don't understand this error nor do I know how to solve the issue that is causing the error. Anyone care to comment?
Quote:
Error: Caching enabled but no local cache of //var/cache/yum/updates-newkey/filelists.sqlite.bz2 from updates-newkey
I know JohnVV. "Install a supported version of Fedora, like Fedora 11". This is on a box that has all 11 releases of Fedora installed. It's a toy and I like to play around with it.
I was laughing about klackenfus's post with the ancient RH install, and then work has me dig up an old server that has been out of use for some time. It has some proprietary binaries installed that intentionally tries to hide files to prevent copying (and we are no longer paying for support or have install binaries), so a clean install is not preferable.
Basically it has been out of commission for so long, that the apt-get upgrade DL is larger than the /var partition (apt caches to /var/cache/apt/archives).
I can upgrade the bigger packages manually until I get under the threshold, but then I learn nothing new. So I'm curious if I can redirect the cache of apt to a specified folder either on the command line or via a config setting?
I installed squid cache on my ubuntu server 10.10 and it is work fine but i want to know how to make it cache all files like .exe .mp3 .avi ....etc. and the other thing i want to know is how to make my client take the files from the cache in the full speed. since am using mikrotik system to use pppoe for clients and i match it with my ubuntu squid
View 1 Replies View RelatedI am reading slab allocator, it defines slab cache, i am quite confuse is it same as hardware cache?
View 2 Replies View RelatedI have problem with my printer HP Deskjet D1460. My printer is configured and works. When I send a file on the print, the printer clings a sheet of paper and starts to print, but a paper as was clean so clean and remains, after printing.
View 2 Replies View RelatedI configured cron to clean my /tmp directory, should I also add other locations to clean and especially /var/tmp.
View 4 Replies View RelatedIs there any difference between apt-get clean and aptitude clean? Do they both remove the same caches? Should I know any other commands for cleaning up wasted space on my ubuntu laptop?
View 1 Replies View Relatedi was looking for a way to stop my menus taking a few seconds to load my icons when i first open them and found a few guides suggesting using the gtk-upate-icon-cache command, but with the any colour you like icon theme i'm using (stored in my home folder .icons directory) i kept getting a "gtk-update-icon-cache: The generated cache was invalid." fault i used the inbuilt facility in the acyl script to copy the icons to the usr/share/icons directory and tried the command again, this time using sudo gtk-update-icon-cache --force --ignore-theme-index /usr/share/icons/ACYL_Icon_Theme_0.8.1/ but i still get the same error. i tried with several of the custom icon themes i've installed and only 1 of the first 7 or 8 i tried successfully created the cache.
View 4 Replies View RelatedI have a computer with 16GB of ram. At the moment, top shows all the RAM is taken, (NOT by cache), but the RAM used by the various processes is very far from 16GB.I have seen this problem several times, but I don't understand what is happening.My only remedy so far has been to reboot the machine.
View 1 Replies View RelatedI get this error when I run "sudo apt-get install python-software-properties"
Preconfiguring packages ...
dpkg: unrecoverable fatal error, aborting:
fork failed: Cannot allocate memory
E: Sub-process /usr/bin/dpkg returned an error code (2)
I'm trying to install deluge via ssh and my vps has 512mb ram and is only using 11% of it prior to running the code.
I have had a fresh install of Ubuntu 9.10 and installed some software after that.Since third some, some process is eating half of my memory.I have checked processes running in system manager but everything is normal.Maximum is consumed by compiz which is about 26 mb, seems very normal.I did restarted my computer several times, and in the start for 5 mins, its fine after that again my cpu fans runs at very fast speed and my one cpu is used up 95 % (I have dual core).Please help me out, this invisible thing is driving me crazy.I am attaching my htop screen shot (sorted by cpu %), now the cpu is not used by completely but fan is still struggling hard and fast.
View 9 Replies View RelatedI am using malloc and frees a lot in my program. It shows its allocated but when i remove it doesnt show as the memory is removed(I am using the top command to view VIRT memory usage). If this continously grows what would happen to my program (Will it go out of memory?)
View 4 Replies View RelatedFedora 14 xfce
HP Mini 210
I am looking to buy some memory for my netbook. Currently I have 1 GB of DDR3 memory. However, the specification says that 2 GB of memory is the max. However, when I do the following it says that 4GB is the max:
[Code].....
I am looking for free database that has low memory usage and innodb and memory like engins that has C API and support trigger and client/server support for using in embedded linux systems.
View 8 Replies View Related