i have a similar problem , i installed ubuntu 10.04 onto a pendrive, it all works fine , but the catch is i have to keep my pen drive inserted to get the grub menu. is there a work around to get grub to work off my hdd( my guess is it is in my pen drive along with the ubuntu files)
View 3 RepliesSo here is my situation..i was using win 7 and ubuntu 10.10 in my dell studio 1555. and i wanted to try out debian so i installed debian in my pendrive. so the grub was modified. when the computer starts it shows debian,ubuntu and win7 no problem.. but if i remove the pendrive, nothing comes up. it shows grub rescue>..
so now i cant start up unless i plug in the pendrive. what to do now to solve this problem?? i want to restore my grub to the previos state.
I know this can be done with install-grub command in recent ubuntu release. How can i install it from puppy linux or distro which does not use grub 2. Will my pendrive boot if i copy /boot/grub from ubuntu 10.04 live cd to /boot/grub of my pendrive?
View 5 Replies View RelatedI put Jolicloud on a pendrive to install it to my laptop, tried it out, didn't like it, and installed ubuntu with a CD instead. Now I want to use my pendrive for storage, so I popped it in, loaded up Gparted and formatted the drive.
Now, when I pop the pendrive into my laptop, Ubuntu thinks that Jolicloud is still on it, when Gparted says there are no partitions on the pendrive.
Screenshot:
How can I properly format the pendrive?
I've installed fedora 8 in my system. i've tried to mount my usb drive. but it's doesn't work out. i followed the following procedure.
#mount /dev/sdb1 /mnt
But now i don't even get the drive as sdb or sdc. i don't know why.
I recently bought a 16GB Super Talent pen drive that seems to work well for running the Ubuntu Live "CD" in persistent mode (see this for how I installed it). One slightly annoying thing, however, is that this pen drive has a bright red light on it that stays on when it's idle.
Is there a way to make the light stay off at least when the pen drive is not performing IO? I'm not even sure it's possible to do. If there is (in Linux), I'm guessing it boils down to some ioctl invoked by some utility. Otherwise, I imagine it would involve hacking the firmware or simply opening up the pen drive and removing the LED.Then again, I guess it keeps the LED on to indicate that the drive should not be removed.
how to make bootable pendrive
View 5 Replies View RelatedI cannot format my Transcend 4 Gb Pen Drive.. When i try to format with the following command code...
I'm not able to format it...
dmesg gives code...
I am a using Windows xp. I had Started my Redhat6 tuition from some days,, My question is " How can I install redhat linux 6 from my pendrive? Please describe me all the steps cause I haven't try to install a O.S. from pendrive?
View 2 Replies View RelatedI would like to use half of my 16gb pendrive to keep files and the other to install linux. Is it possible?
View 7 Replies View RelatedI can login into my linux only as normal user "abc". my slax is giving HAL error in automounting pendrive.
To mount a pendrive i have to login as root in a terminal with SU command and then i can access the pendrive through command line. i normally copies my files into "abc" home directory and browses it from there in konquorer file browser......this is tedious job...everytime.
My idea is to have an icon on "abc" desktop ...which onclick will execute a shell script and manually mount my pendrive in READ WRITE mode at background and display the pendrive folder contents.... using KDE Scripting.
I am using CentOS 5.4 in VMware, having Win XP as host OS. i am unable to mount a pendrive. I have used "#dmesg" command to display the hardwares connected, but its not showing anything about Pendrive. Also tried #mount -t -vfat /dev/sda2 /pendrive........but the error is "...its not a block"
View 3 Replies View RelatedI was building LFS on a pendrive this morning when it crashed in the middle of making gcc. I rebooted without my pendrive and I never got into the desktop. Instead, I get a visually pleasing terminal telling me that it couldn't find and that the only way to reboot would be to press CTRL+D. I'm then given a command line and that's that.
Rebooting with the key inside works perfectly.
I reformatted my key and now there's nothing on it. I feel like somewhere somehow I added an entry to the boot process of my system and now I have to remove it. Never dealt with something like this before
Fstab:
/dev/disk/by-id/ata-WDC_WD2500AAJS-60Z0A0_WD-WCAV2M336077-part1 swap swap defaults 0 0
/dev/disk/by-id/ata-WDC_WD2500AAJS-60Z0A0_WD-WCAV2M336077-part2 ext4 acl,user_xattr 1 1
[Code]....
The LaCie entry at the bottom there is my pendrive.
I have a 8 GB flash drive and a 4.3 GB DVD iso (openSUSE-11.3) Is it possible to use the flash drive to install the linux? Pendrive linux universal USB installer formats it to Fat32 which limits the filesystem to 4 GB.
View 1 Replies View Relatedhow to disable Pendrive access in my Fedora 14KDE. while allowing usb mouse and keyboard.(se linux and firewall to be off) or how to set usb mounting permission only to root?
View 4 Replies View RelatedHow to format USB pendrive for HP Mini netbook?
There are many softwares; Gparted, LiLi USB creator, or Universal USB Installer...
I want to play media file on fedora 11 for this i want to install vlc player on it.. i have this player on pendrive..
View 3 Replies View RelatedSimple. UUID is apparently limited to a single UUID to be defined. Example UUID="DEB0-0001","3338-3164" separated with a comma is not working.
What could be the linux alternatives for pluging several UUID disks? How to bypass when there is a CF card and a reader box, since blkid gives no UUID ?
Code:
UUID="DEB0-0001" /media/pendrive vfat users,rw,noauto,umask=0000,uid=1000,gid=1000 0 0
#UUID="3338-3164" /media/pendrive vfat users,rw,noauto 0 0
#TYPE="vfat" /media/pendrive vfat users,rw,noauto 0 0
I need to configure udev to auto-(u)mount usb pen-drive on my minimal lenny (No X,hal,etc, only udev). kernel correctly detect :
Code:
[287909.514127] usb 1-1.4: new high speed USB device using orion-ehci and address 4
[287909.635454] scsi1 : usb-storage 1-1.4:1.0
[287910.635307] scsi 1:0:0:0: Direct-Access Patriot Memory PMAP PQ: 0 ANSI: 0 CCS
[287910.648078] sd 1:0:0:0: Attached scsi generic sg1 type 0
[code]....
But I would like an hot-plug automount like in my ubuntu desktop, on /media/{us_label_or_uuid}
I am recently installed linux redhat 5.0 using vmware. I am unable to connect pendrive in vmware. I've also one more problem. When i was typing small 'C'language program in vi editor and compiled it and it showed an error like "Bash: cc compiler not found".
View 3 Replies View RelatedI am running the latest version of linux mint from my 16GB flash drive. Is there any way for me to access the other files I have saved on the flash drive? I have tried to searching through folders myself but haven't had any luck.
View 3 Replies View Relatedi have a standalone system in my home. i don't have cd/dvd drive and no any facility to install it form network. i want to install redhat 5.3 using pen drive on my pc.
View 3 Replies View RelatedI am using CentOS 5.3. output of "uname -a" Linux localhost.localdomain 2.6.18-92.el5 #1 SMP Tue Jun 10 18:49:47 EDT 2008 i686 i686 i386 GNU/Linux
My kernal version is kernel-2.6.18-92.el5
Whenver i try to copy files from my centos to pendrive ( 2gb, kingston datatraveller) my system is gettin hanged leaving no option then to reboot. i tried from the terminal also, and as a diffrent user also. but same results.
Nothing is working,[URL] My bootable pendrive is not seen by grub. The tab in grub, e, gives my 3 partitions only
[URL]
I need to use a pendrive with the Slackware 13.0 and I've tried a lot of things I've found at the internet but unfortunately they didn't work. It's not possible to use graphical interface because some reasons. So the problem need to be solved by command line.
When I use "lsusb" command, I can see the pendrive.
However, when I try these:
I got the following message: "Module usb-ohci not found" and "Module usbcore not found"
How can I deal with these problem? Because I guess without these module loaded it's not possible to mount the pendrive. Is it right?
my Setup is Fedora 14 x64 + radeon hd 4830 i've downloaded .run package from ati site with latest driver for x64 systems. installed it, but didn't edited grub.conf becouse i didn't understood anything there (probably didn't spent enough time to get things understand) Now i've lost possibility to enter my Fedora system. during boot it lost it's modern blue boot screen (with filling drop), it was replaced by standard old boot screen with triple-color stripe. after this boot screen monitor start blinking going on and off. and on last step i'm getting "Fedora 14 boot bla bla bla something" on screen. nothing works except Ctrl+Alt+Delete. system reboots showing successful daemons shutting sequence. How can i edit grub menu from initial grub screen is it possible to it's own 'e' option or 'c' from grub command line?
View 4 Replies View RelatedActually when I started format under ' FAT32 All Systems '.. it started and after some time it showed an error and close.. it pendrive unmouted automatically .. I tried with another USB port .. It didn't show up on desktop but there in my computer.. but its not opening there.. When I right clicked on it.. it not showing any options that a pendive icon usually shows like format..
View 1 Replies View RelatedToday I am facing strange issue with my USB. I can't format my pendrive. Doing all possible commands it showing that the pendrive is write protected it cannot be fomatted
I have tried fdisk,cfdisk,gparted,dd, rm * etc pendrive is transcend 8 gib but it showing 530gib of size
Can you install Ubuntu onto a USB PenDrive and then boot it on a PS2?.
View 1 Replies View RelatedI have an 8gig mp3 player and I was wondering if it was possible to install Unbuntu on it, as if it were a bootable pen drive, without destroying it's ability to function as a stand alone mp3 player.
View 1 Replies View Related