Hibernating windows 7 on dual-boot laptop (9.10 Ubuntu - W7) writes something on MBR which breaks GRUB2. GRUB2 does not load at all after hibernating W7 and the best solution is to reinstall GRUB with Ubuntu 9.10 cd, just follow the instructions at [URL]
View 4 RepliesI've just installed new Debian 8 from live CD, lxed. The problem is urgent, I cannot do anything on my laptop, the computer keeps on suspending/hibernating every 30 seconds or so.
View 4 Replies View RelatedWhen I wake up from hibernating I get a black screen, no keyboard. How to fix this, been a problem since jaunty? It's my only problem with ubuntu. I get (please wait waking up screen) then black screen and no keyboard control. I have to hard reboot.
View 3 Replies View Relatedusually when my battery gets critically low, The system warns me to plug it in, and then it hibernates. But recently, It displays no warning, and instead of hibernating it just shuts off. It still displays the "20 minutes remaining" libnotify warning, but thats not useful if I'm doing something fullscreen.
View 1 Replies View RelatedHow can you do that in lubuntu 10.04? In xubuntu 9.10 I could do that, if I use gnome-power-manager and gnome-screensaver, and use gnome-power-manager's icon to suspend/hibernate, but I don't see that kind of option in lubuntu.
View 1 Replies View RelatedRecently my netbook (Toshiba NB100, running Ubuntu 8.04) has started crashing every time I shut the lid. The screen goes black, I press the power switch, and it doesn't come on. The screen stays black but I have a cursor flashing. That's it, nothing happens, I have to restart.
How can I fix this?
When I return to my plasma desktop from hibernating, the font display is broken - kind of stripes It affects all kde and gnome programs, and all window decorations, but f.e. chrome displays the webpages well.What could cause this, and how can I fix it? My system is a dell inspiron 1525 with intel 965gm graphics card running kubuntu 11.04 with no kde ppas enabled.
View 1 Replies View RelatedI followed a guide with the hopes of my computer waking from suspend after a defined number of seconds (for testing purposes, 4 seconds).
Per the guide, I've added a file: /etc/pm/config.d/00-use-suspend-hybrid
Code: Select all# Always use suspend_hybrid instead of suspend
if [ "$METHOD" = "suspend" ]; then
 METHOD=suspend_hybrid
fi
# The delay after which hibernation gets triggered (default: 900 seconds, 15 minutes):
PM_HIBERNATE_DELAY=4
After four seconds of suspend, it continues suspending, and doesn't go into full hibernate.
Does Debian support Hibernation? I have a home file server, I'd like it to hibernate (and use least power as possible) when not in use. To access remotely we'd use wake on lan. I couldn't find any how tos on the wiki.
View 2 Replies View Relatedmy computer screen (actually my plasma connected to it) keeps going into hibernating mode and going to logout screen I logically went to System/More Programs/Power Management and put all the settings all set to Never but still after 5-10 minutes at idle poof! back to loginIs it perhaps something to do with Compiz (I am using Gnome by the way)
View 4 Replies View RelatedI have installed Jessie on my Dell Inspiron 7340 and the touchpad works fine with xserver-xorg-input-synaptics. However, when the system wakes up from hibernation or standby , the touchpad doesn't react.
In /proc/bus/input/devices there are - among others - the following sections:
Code: Select allI: Bus=0011 Vendor=0002 Product=0001 Version=0000
N: Name="PS/2 Synaptics TouchPad"
P: Phys=isa0060/serio1/input0
S: Sysfs=/devices/platform/i8042/serio1/input/input35
U: Uniq=
[Code] ...
When the touchpad works, the "PS/2 Synaptics TouchPad" section isn't there.
In RC 10.4 abcde still writes no tags. Sadly, I should say, since I've always used abcde for ripping CDs.
View 2 Replies View RelatedI'm seeing sustained disk writes of about 2 MB/s in the indicator-multiload indicator in Unity. I determined that it is writes on my 500GB HDD on /dev/sdb. This behaviour started after I used Gparted to create a single 500GB ext4 partition and also selected that it should be formatted to ext4 in Gparted.
Is this usual? It also survived a reboot.. I assume that it is the full formatting taking place in the background?
I saw no activity using pidstat or iotop. Only using vmstat -d revealed the writes.
I'm using 9.10 Desktop 64bit on a Dell Latitude D830. I have 4 gigs of RAM and a 7200 rpm sata hard drive. Everything works pretty well, video, sound, and network. Flash isn't as smooth as in Windows but I assume that's a Flash/64bit thing and not necessarily an Ubuntu thing.
However, one area of performance still lags far behind my Windows XP experience, and that's disk writes. For instance, when I'm copying a large amount of information from a USB drive or from my Windows partition to my native partition, I can barely switch windows until the task is complete, nevermind trying to surf the Web. I thought that that might be related to the slow performance of the ntfs driver, but recently I have been doing a lot of work with VMWare, and I get the same result when trying to pause virtual machines - it writes a largish amount of information to disk in a short amount of time and I can't do much until it finishes.
Here are some things I looked at based on other threads to try to debug my issue:
~$ sudo hdparm /dev/sda
/dev/sda:
multcount = 8 (on)
IO_support = 1 (32-bit)
readonly = 0 (off)
readahead = 256 (on)
[Code].....
That disk read speed is a little faster than average - several more tests showed it hovering around the 66 MB/sec range. Of the other info, I see that UDMA is on which I understand is good, but if there is something else there that I should fix I don't see it.
I know that my computer can handle these tasks (at least the vmware stuff) without such a significant interface slowdown because in XP I did it with less RAM than I have now. Is this just the way that the linux kernel scheduler fails to account for UI needs?
where to writes the commands if i am using fadora 11?
View 2 Replies View RelatedGNU/Linux kernel 2.6
MS Windows XP 5.1 (Service Pack 3)
I want to install windows XP but every time I do so I need several days to get linux running again. In linux I use lilo (don't remember the version no.), which I am familiarized with.how to fix the linux partition after I install xp
System spec:
Core 2 Quad, Q6600, 2.4GHz OC'd to 3GHz
Asus Rampage Formula m/b
2x WD RE2 500GB HDDs ("linux boot" and "winxp boot")
1x Seagate Barracuda HDD ("boneyard")
4GB DDR2-800 RAM
Ubuntu 10.04 LTS
I'm having a really annoying problem with disc activity on my desktop system. Basically, if anything is writing a large amount of data to the hard drive (say, 10MB or over), the machine basically freezes solid. The mouse goes jittery (you move it and it takes a second then moves in one big leap).
For instance, if I try to image a USB hard drive to a file:
# dd if=/dev/sdh of=usbdrive_dump bs=1G
Effectively this works in two portions: it reads 1GB of data to RAM, then blats it out into a file. The machine is perfectly responsive while the USB drive is getting thrashed, but locks solid when the internal SATA drives are in use. Writing to USB HDDs doesn't seem to have the same effect -- I can copy 1GB files to/from them all day long and the machine is perfectly happy.
Read/writes are slow on NFS.How can we diagnosing the issue, what commands are used for the error finding
View 8 Replies View RelatedDoes Linux have a way to trace writes to a file?
For each write, I would like to know the time, date, process id, user, file position, byte count, and the data written.
I could use this with a script to replay the writes to a backup of the original file, and reproduce the file contents as they were at a point in time.
I have a fileserver running 10.04 server 64bit and samba. I connect it to my desktop which is 10.04 desktop 64bit.I have the server mounted on my desktop in fstab as://10.0.0.2/share /media/share cifs guest, uid= 1000.Up until 30 June 2010 it was all fine. Now when I write the server it is very slow e.g. 2Mbps though when I read I get >100Mbps so I think my network is still ok. If i use nautilus smb://10.0.0.2/share I can write at >100Mbps and also read at >100Mbps...So any ideas why the write speed via the fstab mount samba has started to go really slowly in the last couple of days?
View 6 Replies View RelatedI have two ntfs partitions I use to store music and data. I've been using them in all my linux boxes without any problems. Simply use Ntfs-3g with noatime and everything works great.
However, since the update to OpenSuse 11.3 writing to my NTFS partitions takes FOREVER. I've specified noatime, relatime and norelatime successively without success. The partitions have plenty of space and are defragmented.
When copying large files, It starts fast at first, but in the last hundred MB it slows down to about 1.5MB/s. Even after the transfer is supposedly done, the HD led remains on and all other read/write activity involving the partition is completely halted.
This can take between 5 minutes to 10 or more depending on the size of the file. When copying several small files, (100 MB or less) it starts at about 1.5MB/s from the beginning.
I have the latest versions of fuse and ntfs-3g installed
I run a website that a very steady flow of traffic and Im seeing recent issues that I just dont like. Server is 10.04.2 on a supermicro i7-950/6gb RAM with two 500gb Samsung F3 drives in a software RAID1 (1x5400, 1x7200) and for several weeks, its been running very well. Recently, Im seeing the server hang for 5-20 seconds. IOwait goes through the roof, nothing can write to the disk. Apache logs stop, redis fails to rebuild caches, mysql errors and then it continues and moves back to normal operation
/ is ext4, the kernel was 2.6.32-server-x64 but since updating to 2.6.38-server-x64, the issue has dropped from maybe once per 10 minutes to once per 15 minutes. 3 IOstat copy/pastes show this when it hangs.
Code:
Total DISK READ: 0.00 B/s | Total DISK WRITE: 0.00 B/s
TID PRIO USER DISK READ DISK WRITE SWAPIN IO> COMMAND
[code]...
No smart errors or smart diags show any issues with any of the disks and kernel.log shows near nothing other than a process hang, 120 seconds about 5 days ago.
We are graphing various system parameters using Cacti. One of our graphs shows hard drive reads and writes. A question came up: why do we need this graph?
View 3 Replies View RelatedIs there a way under linux to find out directory with frequent writes and/or deletes?
I'm using Ubuntu and recently bought SSD. I moved /tmp to ramdisk and did some other tweaks to avoid wear. But I was wondering if there's a way to pinpoint hotspots in filesystem where files are often written. For example webserver's log directory with many appends every minute or user's download directory where he downloads gigabytes of stuff only to be moved elsewhere soon after finishing.
I came across inotify which could probably do the trick but it seems it'd require lot of scripting which I'm not very familiar with
I hav Debian Sqeeze, and not knowing what I did, it suddenly starts to consider all pressing of e key as 0128. Also some other key, which I don't know currently. I use different layout, however it happens on others too.
View 2 Replies View RelatedI'm working on a project using CentOs 5.3 that uses a solid state drive (SSD) as the boot device. It is desired to configure it such that writes do not typically occur run-time but configuration files can be saved. There are 2 reasons we do not want writes to occur run-time. 1) Writes will wear out a SSD over time. 2) A system disruption during a write can cause a file system error.
View 3 Replies View RelatedI have Fedora installed on a netbook. I customarily mount several NFS shares on this machine, from both a desktop system running F11 and a small server running FreeBSD. On the server side the shares are write-enabled. On the server side the shares are write-enabled. In the past this has worked fine.
However since upgrading to F12, my configuration no longer works as before. Reading from the NFS shares is no problem, but as soon as I try to write to one, either in Nautilus or from any other program, including on the cmd line, all hell breaks lose. Nautilus crashes, and I am unable to remount the shares. Usually rebooting the client is the my only recourse.
There are no clues in dmesg on either the client or the server. In terminal trying to remount a "trashed" share I see this:
Code:
$ sudo mount -v venus:/media/disk8 /media./disk8
mount: no type was given - I'll assume nfs because of the colon
mount.nfs: timeout set for Sat Feb 20 17:34:59 2010
mount.nfs: prog 100003, trying vers=3, prot=6
[Code].....
The NFS versions under F11, F12, and FreeBSD are the current ones (all updates applied).
I had the idea to cache writes to my nfs filesystem on my local hard drive.
It seems CacheFS exists to cache reads, but not writes to nfs.
I would imagine that if I could cache writes to my nfs on a local drive I could have a fast system, but keep all my files where I want them on my network.
I'm thinking about this because I am planning on buying a SSD, and I would imagine if I could set things up this way the system could be lightening fast while keeping things on the network. Currently if I copy a large file (hundreds of MB) it is quite slow, with an SSD and caching, I would imagine the copy could be very fast.
like my alias a retired person, and Its never to late to learn something½ve just installed Ubuntu and found a tutorial online about bash-script.Manage some, but I cant to this one:[Write a script that makes file executable and writes a message that it has been done.If I run the command > <scriptName> <fileName> , then the file fileName should be executable and then it should indicate that fileName have been executable.]
Ive read man pages up-n-down and search the web, and I think I should let the script use chmod and ls -l, but I cant get the hole picture here. Actually I have nothing to show up, so I hope someone could help me with some ideas or a soloution - just to the how it should look.This is my first post, ever, at a forum like this, so please be nice if I didnt follow any rules here, I dont know if you even will answer this post, but at least give me some clues, a skeleton-code ti be based on
Is there a way to determine the IO size that is being used for reads and writes to an attached storage device? I am trying to pattern the IO sequences to storage. I have seen mentions to max_sectors_kb but the notes indicated that changing this value did not change the IO size to the storage.
View 1 Replies View Related