Ubuntu 11.04 desktop 64bit Just upgrade from Ubuntu 10.10. But virtualbox can't be located on the menu. Neither I can start it. how to start it and get it added to the menu.
View 2 RepliesUbuntu 11.04 desktop 64bit Just upgrade from Ubuntu 10.10. But virtualbox can't be located on the menu. Neither I can start it. how to start it and get it added to the menu.
View 2 Replies View RelatedI'm currently using the PUEL version of Virtualbox 3.0.12 and whenever I open it, it prompts me to update - see screengrab.
Clicking that link and choosing to open it via the package installer (see screengrab) results in the error screen below - another screengrab.
I then realised the deb file was named Jaunty, so went to the Vbox website to download the Karmic file.
Running that via package installer produces the same error - Error: Conflicts with the installed package 'virtualbox-3.0'
Do I need to remove the old version first? If so, how do I do that (given that this is the PUEL version not the open-source version) and will my existing virtual machines (I've got WinXP and ChromeOS) be safe and still work afterwards?
My reason for wanting to upgrade is to virtually try Ubuntu 10.4 which I just cannot get to run or install in Vbox (either from a CD or from the iso image)
I'm trying to upgrade Virtualbox but I get the following error. What can I do? I use Ubuntu Release 10.04 with Linux 2.6.32-24 generic.
View 4 Replies View RelatedI just upgraded to 11.04, and apart from an initial freakout because I didn't realize why all my settings were borked*, I haven't had any difficulties... until today. I ran my virtual WinXP machine (VirtualBox) to watch some streaming Netflix, and the sound didn't work. Sound still works under Ubuntu just fine. No idea why it didn't survive in my virtual machine.
I noticed when I started that it said there was an upgrade for the VirtualBox software, so I did that, but that didn't fix it either. I'm using PusleAudio for the Host Driver and ICH AC97 for the audio controller on my virtual XP machine. These worked before the upgrade, now... not so much. I tried switching the driver to ALSA and the controller to SoundBlaster 16 (and other different available combos, etc), to no avail.
* It turns out that crap pile, Unity, did away with all my nice custom panel layouts and configs and replaced them with something ugly, unwanted, and non-intuitive. I'm using "Ubuntu Classic" now because Unity is horrible.
Since my distribution upgrade to 10.04 my VirtualBox guest of XP SP3 will not boot, it bluescreens and reboots. I can boot the guest in last known good config and in safe mode but I have no CDROM. I attempted a tools install over the lan but that resulted in the same blue screen. Tried installing the virtualbox-3.2 beta package and guest tools and had the same results..
View 1 Replies View RelatedUpgraded. VBox (Win7 - 64bit) runs well, but does not see attached drives. Removed the drives, and attempting to re-attach, usually results in an immediate Windows 7 crash. Even when attached (lucky) - the drives do not re-attach after a VBox reboot. Is there some easy way to downgrade to 10.10??
View 2 Replies View RelatedWhen I fired up 10.10 this morning on VirtualBox as usual (running on Windows 7 machine), I got prompted to upgrade to Ubuntu 11.04 Natty Narwhal, so I followed the prompts and after about 4 hours or more, my vm restarted and says 11.04 is running, however, I never get to the Ubuntu desktop. Im stuck at some startup screen that shows the Ubuntu logo and I definitely cant see the System, Peferences, etc. menus at the top left.
One thing I came across is that 11.04 is designed for use with touch screen devices and 3D, and thus 3D acceleration is required in the VirtualBox settings, but even after checking that option and restarting I still couldnt get to the desktop.
Also, during the install I came to a step where I was prompted to discard files no longer needed at which point I agreed to have them deleted (41MB or so of files). Maybe I should have just kept everything.
Did I miss a step or is it not good practice to upgrade on a vm in this manner, meaning it's better to always download the .iso and do a fresh install?
I upgraded to Lucid last night, and I'm getting this error when I try to run virtualbox-ose:
Quote:
Kernel driver not installed (rc=-190 Please install the virtualbox-ose-dkms package and execute 'modprobe vboxdrv' as root.
I try it, then I get:
Quote:
modprobe vboxdrv
FATAL: Module vboxdrv not found.
I have no idea what's going on. Can anyone help? The version of virtualbox is 3.1.6-dfsg-2ubuntu2
i have recently installed linux ubuntu and set it up, i was then promted to install updates (roughly 174). i did this, however once the updates had been downloaded, they continue to install then about halfway through it freezes, nothing happens and time does not fix this problem. I have restarted the laptop and 4 options appear, including recovery menu's, i have re-installed ubuntu as what i tried from that menu did not work.
View 2 Replies View RelatedI had Ubuntu 10 running on vmware machine. It ran fine. I upgraded to version 11, but now when the machine restarts I do not get any menu, I just get his:
GNU BRUB version 1.98-1ubunutu7
Minimal BASH-like line editing is supported.
grub>
And that is it! No menu, no list of options, nothing. If I type "ls" I get:
(hd0) (hd0,5) (hd0,1) (fd0)
I can enter "root (hd0,1)" which gives me:
(hd0,1): Filesystem is ext2.
Then typing "kernel /boot/vm" and pressing tab shows:
vmlinuz-2.6.32-27-generic vmcoreinfo-2.6.32-27-generic vmlinuz-2.6.35-28-generic vmcoreinfo-2.6.35-28-generic vmlinuz-2.6.38-8-generic vmlinuz-2.6.38-8-generic
There is no /boot/grub/menu.lst but there is /boot/grub/grub.cfg which seems fine as far as I can tell. Did I somehow end up with an older grub which is looking for menu.lst? I have other machines running Ubuntu and if I boot into them I seem to get a GRUB4DOS etc. slightly different version. The grub version shown above is 1.98 but I read somewhere Ubuntu uses version 2? Actually I found another post which suggests that this is the correct grub version for Ubuntu 11. How can I tell what menu file grub is looking for where it is looking and why its not finding or using it? It should work...
I upgraded to Natty yesterday and my system boots into it ok but I don't get a grub menu (and so no other options like recovery mode which I really need right now). I tried purging grub and re-installing it on /dev/sda but still no joy. Here's the info from the Boot Info Script. I've also tried uncommenting GRUB_GFXMODE=640x480 in /etc/default/grub but that doesn't help. How I can get the menu back?
Code:
Boot Info Script 0.56 from 8 February 2011
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos1)/boot/grub on this drive.
=> Windows is installed in the MBR of /dev/sdb .....
Devices which don't seem to have a corresponding hard drive: sdc
StdErr Messages:
unlzma: Decoder error
unlzma: Decoder error
Ive just upgraded to 11.04 using the update manager and now ive no boot menu and when I restart I just get a message on my monitor that says "out of range"
Ive tried Shift+alt+f7, ctrl+alt+f1 and pressing shift on startup. Ive also followed the advice on a help thread on here to edit /etc/default/grub and comment out GRUB_HIDDEN_TIMEOUT=00 (except on mine there was only one '0' and it was already commented out!!) and now im completely stuck. Im running in the live CD environment at the moment
My machine is an hp 2133 mininote. It came factory installed with Windows vista, which repeadtedly crashed on me. To compenstate for this i installed gOS to dual boot with Vista. This was working fine but I was recently given a Windows 7 install disk, so I decided to upgrade. Windows seven installed without a problem but now I can't access the GRUB bootloader, windows 7 just loads automatically. I tried to restore it using the Super GRUB Disk usb utility but it didn't work, windows 7 still boots regardless.
View 1 Replies View Relatedjust recently upgraded to 10.04. After the upgrade I noticed that certain Administration menu items are msising. I can't find the "Hardware Drivers" tool. Is there a way to reinstall to put the complete files and correct the menu items, etc.?
View 6 Replies View RelatedLast night I upgraded to Lucid from Karmic, and now I can't play any DVDs (physical or ripped). These worked fine in Karmic, but now when I select them, playback freezes on any menu, and I have to kill the front end process. Mythtv is set to use the internal player, but I have the same issue with VLC.
View 4 Replies View RelatedI recently upgraded my Ubuntu from 9.10 to 10.04 and now it's messed up my Windows Vista partition. When I try to load Windows it boots to a strange login menu with low resolution. It then takes me to a screen with options like Repair/Fix, Recovery, Complete Recovery... I'll click Repair and and then it will say No errors found, Shut down, Restart.
View 2 Replies View RelatedThis seems to be a strange problem, and I have searched high and low for answers. Since Ubuntu 10.04 I have been upgrading via LiveCD and had no problems, however after an upgrade to 11.04 I now have Grub 1.99 giving me a list of versions to chose from before the OS loads. Now, call me fussy, but I don't want this, I just want to turn on my PC and go straight into Ubuntu as it always has done. I have tried various fixes such as looking for old Kernals in Package Manager, but no old kernals show up! Same for Ubuntu-Tweak, nothing shows up when I click on clean kernals.
View 5 Replies View RelatedAfter upgrading to 11.04 from 10.10 they were there, but now I see no panel, no menu. Just desktop with icons with 1200 screen resolution. I can change keyboard with shortcut. No other shortcuts working.
View 1 Replies View RelatedI've been running Ubuntu on one of my old notebooks (Acer Aspire 5516) for the past two years. My problem started when I tried to upgrade to 11.04 64 bit. The installation seemed to go fine, but when I restarted to finish, after I would log in all I would see is the background with no menus or anything. I tried doing a fresh install and seeing if that helped, but it didn't. I had to downgrade back to 10.10. Does anyone know if 11.04 works at all on the Acer Aspire 5516 or a similar model? Even at 32 bit?
View 2 Replies View RelatedYum 'pre-upgrade' added new kernel to menu.lst, but I don't boot from that GRUB; I boot from GRUB on another partition. The new kernel is ready to install, but the GRUB that I boot with ain't linking' to the pre-loaded kernel.
Code:
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You do not have a /boot partition. This means that
# all kernel and initrd paths are relative to /, eg.
# root (hd0,3)
# kernel /boot/vmlinuz-version ro root=/dev/sda4
# initrd /boot/initrd-version.img
# boot=/dev/sda
default=1
timeout=5
splashimage=(hd0,3)/boot/grub/splash.xpm.gz
hiddenmenu
title Upgrade to Fedora 10 (Cambridge)
kernel /boot/upgrade/vmlinuz preupgrade repo=hd::/var/cache/yum/preupgrade stage2=hd:UUID=cc9cedeb-1f14-4cf7-8b4e-ce05acd8c4e7:/boot/upgrade/install.img ks=hd:UUID=cc9cedeb-1f14-4cf7-8b4e-ce05acd8c4e7:/boot/upgrade/ks.cfg
initrd /boot/upgrade/initrd.img
title Fedora (2.6.23.1-42.fc8) <---This is the current entry from OTHER GRUB.
root (hd0,3)
kernel /boot/vmlinuz-2.6.23.1-42.fc8 ro root=LABEL=/1 rhgb quiet
initrd /boot/initrd-2.6.23.1-42.fc8.img
I have a /boot partition, and the online update process has downloaded the upgrade to /boot/upgrade. The problem is that grub is actually booting from a directory /boot which is in the root partition, but is invisible once the machine has booted, because the /boot partition is mounted over it. The result of all this is that the upgrade option does not appear in the boot menu, because that option has been inserted in the menu.lst (or grub.conf) in the /boot partition. is it ok for me to run:grub-install /dev/sda4(that's the device that contains the /boot partition where the upgrade menu option and data). Also, do I need the --root-directory option, given that the boot directory is the root directory of that partition.
View 3 Replies View RelatedI installed sun virtual box 3.1 by double clicking on its .deb package and it said it has been successfully installed, but I can't see it in the applications menu, what's wrong ? It's listed under synaptic package as installed after completing the installation
View 3 Replies View RelatedI am working with Ubuntu for the first time since school and it was an intro class. I am trying to setup a file server for part of a school project. I installed x11vnc and am trying to set the password. However everywhere I look says the file would be located at ~/.vnc/passwd. However when I ls from the home directory .vnc does not exist. When I type out vncpasswd ~/.vnc/passwd I get returned a message The program 'vncpasswd' can be found in the following packages:
* tightvncserver
* vnc4server
how I can get this setup? Am I using old information that is no longer accurate or am i messing this up somewhere?
I am running Ubuntu 11.04 Natty Narwhal on Virtualbox 4.0.6 (host OS is Ubuntu 10.10 Maverick) and for some reason the Global Menu does not follow the theme selected in appearances. By this I mean that no matter what theme I select the Global Menu resembles something like a Windows 95 theme, I presume a default basic theme. This also applies to the 'Home Folder' icon in the launcher and the corresponding icons in the home folder itself.
Has anyone else come across this and does anyone know how to correct it? I have also posted on the Virtualbox forums, but judging by the number of people logged on at the time I fancy my chances here better.
Just updated from Lucid to Maverick UNE. (It froze at one point, so I killed it from a virtual console and used 'dpkg --configure -a' to complete the installation.) My question: Isn't the new 'unity' sidebar launcher supposed to replace the old on-screen menu? We now have both. And the old menu seems buggy: e.g. the text under some icons is displayed *vertically* (i.e. in a column just one character wide!) instead of horizontally.
View 9 Replies View RelatedWhere can I find a list of changes/fixes after a regular Ubuntu update has already been installed? Are the changes/fixes recorded somewhere within the system?
View 1 Replies View RelatedOn a new installation of Ubuntu Lucid I can install a network printer by getting the Printer utility to search the network to find it. The Printer utility then proceeds to install the driver. However when I try to print the test page I get an error saying that it can't locate the printer. The printer is not new, and all other computers on the network (all Ubuntu Lucid) can print to it.
[Code]...
initrd.lz is a Lzip file in the casper directory of the Ubuntu install iso.
I'm having trouble finding a program that will extract it.
Lzip - fails
file-roller fails
How to extract it?
I've downloaded & installed WINE via YUM, as root, but can't seem to find the file afterward? Where can it possibly be located? I'm using regular user account now. Or must I be root to find it? Source: [URL]
View 2 Replies View Related