Fedora Installation :: Yum Upgrade Added New Kernel To Menu
Mar 6, 2009
Yum 'pre-upgrade' added new kernel to menu.lst, but I don't boot from that GRUB; I boot from GRUB on another partition. The new kernel is ready to install, but the GRUB that I boot with ain't linking' to the pre-loaded kernel.
Code:
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You do not have a /boot partition. This means that
# all kernel and initrd paths are relative to /, eg.
# root (hd0,3)
# kernel /boot/vmlinuz-version ro root=/dev/sda4
# initrd /boot/initrd-version.img
# boot=/dev/sda
default=1
timeout=5
splashimage=(hd0,3)/boot/grub/splash.xpm.gz
hiddenmenu
title Upgrade to Fedora 10 (Cambridge)
kernel /boot/upgrade/vmlinuz preupgrade repo=hd::/var/cache/yum/preupgrade stage2=hd:UUID=cc9cedeb-1f14-4cf7-8b4e-ce05acd8c4e7:/boot/upgrade/install.img ks=hd:UUID=cc9cedeb-1f14-4cf7-8b4e-ce05acd8c4e7:/boot/upgrade/ks.cfg
initrd /boot/upgrade/initrd.img
title Fedora (2.6.23.1-42.fc8) <---This is the current entry from OTHER GRUB.
root (hd0,3)
kernel /boot/vmlinuz-2.6.23.1-42.fc8 ro root=LABEL=/1 rhgb quiet
initrd /boot/initrd-2.6.23.1-42.fc8.img
View 2 Replies
ADVERTISEMENT
Sep 10, 2009
After new kernel update I noticed that I have 2 different versions of 1 kernel installed.
Kernels are:
2.6.30.5-43.fc11.i686.PAE (this one I use because previous kernels are all .PAE)
and
2.6.30.5-43.fc11.i586
Should I now expect any problems with later kernel releases or can I leave it this way? I boot in the .PAE kernel.
View 14 Replies
View Related
Jul 26, 2010
If i use yum update option it upgrades to latest kernel but i only want to upgrade to kernel-2.6.31.6.
View 8 Replies
View Related
Jul 2, 2009
I have a /boot partition, and the online update process has downloaded the upgrade to /boot/upgrade. The problem is that grub is actually booting from a directory /boot which is in the root partition, but is invisible once the machine has booted, because the /boot partition is mounted over it. The result of all this is that the upgrade option does not appear in the boot menu, because that option has been inserted in the menu.lst (or grub.conf) in the /boot partition. is it ok for me to run:grub-install /dev/sda4(that's the device that contains the /boot partition where the upgrade menu option and data). Also, do I need the --root-directory option, given that the boot directory is the root directory of that partition.
View 3 Replies
View Related
Mar 8, 2011
I just updated my kernel on Fedora 13. The bug update thing popped up, I clicked install, it asked me to restart, I did this, now the loading bar on boot gets to the end then stops and goes no further. A google search showed people using older versions of Fedora have had some issues similar because of their nVidia graphics card, which I also have, however I can't find a solution. There is no terminal to play with, no error message, so I have very little to go on. I have a java project for uni on there I need to rescue so any help would be very welcome.
Extra update, while starting up I pressed esacpe and was giving the option of an interactive start up which pretty much confirmed it was a problem with the nVidia card, told me that the driver wasn't installed with warning writern (is this a word?) next to it orange writing which didn't seem to positive. It seems that spamming escape earlier in the boot lets me play with grub. Using the old kernel to boot doesn't seem to help. So ready for those solutions now.....
View 3 Replies
View Related
Dec 25, 2010
I've just gotten another kernel upgrade, and need to copy it to a bootloader on another Linux sytem, so Fedora will boot, using legacy grub. The problem is that when I check /boot/grub/grub.conf, I get title Fedora (2.6.34.7-66.fc13.i686) root (hd0,2)
[Code]...
It's all Greek to me, but evidently it means something to grub, as that's what is in the Fedora kernel(s) that work. I can't find where this "bunch of stuff" is for the new kernel, so I can paste it into the grub file on the other system. The other system is Linux Mint9, and I've made Mint work using (legacy) grub, and deleted grub2 so that it's no longer Mint's bootloader.
View 4 Replies
View Related
May 9, 2011
I had a FC13 box which I ran a yum update which obviously does updates to the packages installed. My issue is that its tried to upgrade the kernel to FC14 and that has toasted by install. now when the box boots up I get this on the screen.
[ 1.741672] Kernel Panic - not syncin: VFS: unable to mount foot fs on unknown -block(0,0)
[ 1.741715] Pid: 1, comm: swapper Not tainted 2.6.35.12-90.fc.x86_64 #1
[ 1.741754] Call Trace:
[ 1.741789] [<ffffffff81468d6f> panic+0x8b/0x10d
there are a few more lines like te last one. I've tried a rescue disk but no good. is my box toasted for good? I've used a live cd and can still the data on the box, is there any way to resue this situation? or is it run live cd backup the data and do fresh install?
View 4 Replies
View Related
Apr 12, 2011
Here is my problem:
I need to enable the statistic module in iptables.
I had Fedora 13 32 bits, iptables-1.4.7-2 and kernel 2.6.18
But kernel 2.6.18 does not support statistic module.
So, I upgraded from Fedora 13 to Fedora 14.
Now I have Fedora release 14 (Laughlin) and Kernel 2.6.18
I did this to upgrade: url
Also, I did this too.
# yum update kernel
No Packages marked for Update
How can I ugrade to newer kernel?
View 9 Replies
View Related
Jan 20, 2011
wondering if it's possible to add a link to a file in the Places Menu? for example a link to a Writer file I use a lot. I see how to add folders, but is it possible to add files?
View 9 Replies
View Related
Jan 1, 2010
I re-added Wine to my application menu, but the winebrowser doesn't work. When I click it, then it just does nothing. The command related to the button is
Code:
xdg-open /.wine/dosdevices/c:
When I paste that into the terminal I got "No such file or directory", but when I normally browse the folders then it is there...
View 2 Replies
View Related
Jun 8, 2010
I just set up a separate monitor, I am running Ubuntu 10.04, I use the nVidia graphics driver, Now the Bars on the top and the bottom of the screen won't appear and can't be used. I rebooted w/ out the second monitor and now it disabled itself. I can't get the terminal option at the login screen. When I rebooted the first time w/ the second screen icon's on the desktop appeared. Now nothing appears, but the background. I opened up my browser (Google Chrome) by my key combinations for those who are wondering how I posted this.
View 1 Replies
View Related
Jul 11, 2015
I was trying to run a jar file, so after using the "Open With..." context option to bring up "Choose Application", and I opened the "Custom Command Line" tab; I typed "java %f" and set Application name..My problem is that, I was left with an option in the File Properties "Open with:" drop-down box, and more annoyingly, a context menu option above "Open With..." to run .jar files with this useless option I created.
View 2 Replies
View Related
Mar 27, 2009
I recently upgraded from FC7 to FC10 (Also, the Kernel from 2.6.22.9 to 2.6.27.19).I did the upgrade through Yum (First installed the fc10 rpms, then did yum upgrade).Now the new Kernel won't boot.These are the options in GRUB for the new Kernel
Code:
root(hd0,1)
kernel /boot/vmlinuz-2.6.27.19-170.2.35.fc10.x86_64 ro root=LABEL=/ rhgb debug
[code]....
View 1 Replies
View Related
Sep 25, 2010
After having patched the kernel with an ABI-patch I cannot find it in the grub2-Menu OS: Ubuntu 10.04 LTS in /boot I can see: the original and the new config-file
Quote:
config-2.6.30.1ABI-2.6.29.1_4
config-2.6.32-21-generic
The original and new vmlinuz-file
Quote:
vmlinuz-2.6.32-21-generic
vmlinuz-2.6.30.1ABI-2.6.29.1_4
[Code]....
View 1 Replies
View Related
Jun 10, 2011
How do I remove old kernels from the Fedora grub menu? I have three currently and I want to keep only one old version to fall back if I have any problems with the current one. When I was using Ubuntu, I had Ubuntu Tweak which had an option to clean up old kernels from the grub menu .. is there something similar for Fedora?
I'm using Fedora 15 32-bit with Gnome 3.
View 6 Replies
View Related
Feb 10, 2010
I seem to have determined a few other things about my "only gets as far as a GRUB command line" problem:To recap, sda3 (GRUB hd0,2) is the main Linux partition; sda9 (GRUB hd0,8) is the boot partition.GRUB is 0.92.Installation was from an 8.04LTS live CD (at least, that's what the envelope says it is)/"/boot/grub" (i.e., "/grub" on sd9/hd0,8) contains a "menu.lst" file. I modified it (had to do a "sudo gedit" from a command line!) to (1) comment out the line that hides the boot menu, (2) change the timeout from 3 seconds to 90, and (3) add a menu line based on my succesful manual IPL of DOS.
It still boots to a GRUB command line. If I do a "configfile /grub/menu.lst," a boot menu comes up. DOS will successfully IPL, but Linux still gets a "no setup signature found," (ditto for "recovery mode"), which suggests either a bad kernel, or a kernel that's too big for the GRUB to handle.Why would it be finding its way to grub, but not finding the boot menu file?Why would the live CD come up just fine, yet the GRUB and kernel it installs fail?
View 9 Replies
View Related
Mar 8, 2010
I use Linux Mint, and I installed a linux-rt from the repository, but when I restart my computer no grub menu shows up. It just boots linux mint. How can I get it to show the menu so I can choose the real time kernel?
View 1 Replies
View Related
Jan 7, 2010
i have recently installed linux ubuntu and set it up, i was then promted to install updates (roughly 174). i did this, however once the updates had been downloaded, they continue to install then about halfway through it freezes, nothing happens and time does not fix this problem. I have restarted the laptop and 4 options appear, including recovery menu's, i have re-installed ubuntu as what i tried from that menu did not work.
View 2 Replies
View Related
Apr 28, 2011
Ubuntu 11.04 desktop 64bit Just upgrade from Ubuntu 10.10. But virtualbox can't be located on the menu. Neither I can start it. how to start it and get it added to the menu.
View 2 Replies
View Related
May 3, 2011
I had Ubuntu 10 running on vmware machine. It ran fine. I upgraded to version 11, but now when the machine restarts I do not get any menu, I just get his:
GNU BRUB version 1.98-1ubunutu7
Minimal BASH-like line editing is supported.
grub>
And that is it! No menu, no list of options, nothing. If I type "ls" I get:
(hd0) (hd0,5) (hd0,1) (fd0)
I can enter "root (hd0,1)" which gives me:
(hd0,1): Filesystem is ext2.
Then typing "kernel /boot/vm" and pressing tab shows:
vmlinuz-2.6.32-27-generic vmcoreinfo-2.6.32-27-generic vmlinuz-2.6.35-28-generic vmcoreinfo-2.6.35-28-generic vmlinuz-2.6.38-8-generic vmlinuz-2.6.38-8-generic
There is no /boot/grub/menu.lst but there is /boot/grub/grub.cfg which seems fine as far as I can tell. Did I somehow end up with an older grub which is looking for menu.lst? I have other machines running Ubuntu and if I boot into them I seem to get a GRUB4DOS etc. slightly different version. The grub version shown above is 1.98 but I read somewhere Ubuntu uses version 2? Actually I found another post which suggests that this is the correct grub version for Ubuntu 11. How can I tell what menu file grub is looking for where it is looking and why its not finding or using it? It should work...
View 2 Replies
View Related
May 4, 2011
I upgraded to Natty yesterday and my system boots into it ok but I don't get a grub menu (and so no other options like recovery mode which I really need right now). I tried purging grub and re-installing it on /dev/sda but still no joy. Here's the info from the Boot Info Script. I've also tried uncommenting GRUB_GFXMODE=640x480 in /etc/default/grub but that doesn't help. How I can get the menu back?
Code:
Boot Info Script 0.56 from 8 February 2011
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos1)/boot/grub on this drive.
=> Windows is installed in the MBR of /dev/sdb .....
Devices which don't seem to have a corresponding hard drive: sdc
StdErr Messages:
unlzma: Decoder error
unlzma: Decoder error
View 4 Replies
View Related
Jun 4, 2011
Ive just upgraded to 11.04 using the update manager and now ive no boot menu and when I restart I just get a message on my monitor that says "out of range"
Ive tried Shift+alt+f7, ctrl+alt+f1 and pressing shift on startup. Ive also followed the advice on a help thread on here to edit /etc/default/grub and comment out GRUB_HIDDEN_TIMEOUT=00 (except on mine there was only one '0' and it was already commented out!!) and now im completely stuck. Im running in the live CD environment at the moment
View 9 Replies
View Related
Aug 12, 2010
Contents of grub.conf
Code:
# grub.conf generated by anaconda
#
[code]...
View 10 Replies
View Related
May 27, 2011
I upgraded to Fedora 15 (64 bit) on my laptop using preupgrade. Everything is working great except for a small problem. My menus are completely messed up. In F14, I had organized my menus in a particular way. After the upgrade, many of items have been moved around quite randomly. I tried to fix it using 'alacarte' but nothing is changed in that - i.e. according to 'alacarte' all my menus are in the right place. In reality, though, the upgrade process has deleted a few menu folders but not the items in them. The items are just moved to random locations. Is there a way to fix these changes these? 'alacarte' is of no use here. Is it possible to fix these using CLI? Where are the information regarding the menu organization stored?
View 4 Replies
View Related
Mar 14, 2010
I'm a very new Linux user, so speak slowly and don't use big words. I installed Karmic from the Live CD. It is the only OS in use on this system. I then upgraded to Ubuntu Studio using the instructions found on the wiki.
On bootup, I get a brief message stating "GRUB loading" and then the system automatically boots to the generic kernel. No GRUB menu is ever displayed. I would like the option to boot to the real-time kernel, but I have no idea how to edit the appropriate files. I've done a fair amount of reading on the subject, but I find very little information relating directly to the real-time kernel, and so I still feel like I'm too green to do it without messing something up.
View 6 Replies
View Related
Feb 6, 2010
My machine is an hp 2133 mininote. It came factory installed with Windows vista, which repeadtedly crashed on me. To compenstate for this i installed gOS to dual boot with Vista. This was working fine but I was recently given a Windows 7 install disk, so I decided to upgrade. Windows seven installed without a problem but now I can't access the GRUB bootloader, windows 7 just loads automatically. I tried to restore it using the Super GRUB Disk usb utility but it didn't work, windows 7 still boots regardless.
View 1 Replies
View Related
May 14, 2010
just recently upgraded to 10.04. After the upgrade I noticed that certain Administration menu items are msising. I can't find the "Hardware Drivers" tool. Is there a way to reinstall to put the complete files and correct the menu items, etc.?
View 6 Replies
View Related
Jul 24, 2010
Last night I upgraded to Lucid from Karmic, and now I can't play any DVDs (physical or ripped). These worked fine in Karmic, but now when I select them, playback freezes on any menu, and I have to kill the front end process. Mythtv is set to use the internal player, but I have the same issue with VLC.
View 4 Replies
View Related
Oct 5, 2010
I recently upgraded my Ubuntu from 9.10 to 10.04 and now it's messed up my Windows Vista partition. When I try to load Windows it boots to a strange login menu with low resolution. It then takes me to a screen with options like Repair/Fix, Recovery, Complete Recovery... I'll click Repair and and then it will say No errors found, Shut down, Restart.
View 2 Replies
View Related
Apr 30, 2011
This seems to be a strange problem, and I have searched high and low for answers. Since Ubuntu 10.04 I have been upgrading via LiveCD and had no problems, however after an upgrade to 11.04 I now have Grub 1.99 giving me a list of versions to chose from before the OS loads. Now, call me fussy, but I don't want this, I just want to turn on my PC and go straight into Ubuntu as it always has done. I have tried various fixes such as looking for old Kernals in Package Manager, but no old kernals show up! Same for Ubuntu-Tweak, nothing shows up when I click on clean kernals.
View 5 Replies
View Related
