Ubuntu Installation :: Use An Arrow Key To Move Downwards In The Menu - Grub Hangs
Jan 17, 2010
I saw a similar thrad, but can't find it anymore. Anyhow it was not resolved. So I take the liberty to post this in a new thread: I have installed ubuntu 9.10 on a laptop in dual boot configuration (other OS is WinXP). grub starts and I can hit enter to boot Ubuntu. However as soon as I use an arrow key to move downwards in the menu, grub hangs. In this condition I cannot boot any other OS, not even the "safe" version of Ubuntu.
Any idea what is the cause of this? It is a fresh installation and I read in the other thread that reinstalling grub or re-running grub-update had no positive effect. Does anone know how I can install grub 0.97 ? Where do I find it?
View 2 Replies
ADVERTISEMENT
Nov 24, 2010
i have ubuntu 10.04 and xp installed in two different hard disc partitions. everything was fine until i came from vacation and found that after turning on my pc it gets hang as soon as the grub menu with duel boot option appears. i cant do anything at that stage, just nothing.keyboard doesn't work also. here one thing to be mentioned that for last few days my pc used to hang frequently in ubuntu 10.04 and then i had no option left but to restart my pc.
View 5 Replies
View Related
Jan 19, 2010
not related to this thread [URL]
On a few VMs. Sometimes, when powering them on I get the GNU GRUB menu...
Code:
GNU GRUB version 1.97~beta4
Ubuntu, Linux 2.6.31-14-generic
ubuntu, Linux 2.6.31-14-generic (recovery mode)
Memory test (memtest86+)
Memory test (memtest86+, serial console 115200)
etc
But there is no countdown for a default boot. It just hangs here. Indefinitely. Until I make a choice by pressing the enter key with "Ubuntu, Linux 2.6.31-14-generic" highlighted (default). I don't know if this is because the VM may not have been shutdown properly or what the case is, but this is unacceptable as I need these systems to continue to boot and get back on line regardless of the reason they were powered off.
View 3 Replies
View Related
Jan 29, 2011
I have dual boot (winxp) which has been working for over a year now.But for some reason recently, grub wont recognise the keyboards arrow keys. ie cant change menu selection. in fact it wont recognise keyboard at all it seems. Pressing enter wont work either. I have to wait for the timeout.
The arrows work before hand (like in bios settings) and after once ubuntu has booted. Just not in the grub menu
Its something to with the USB wireless keyboard. If i replace it for standard PS2 kybd it works.
View 1 Replies
View Related
Mar 26, 2011
I'm currently tweaking ubuntu to my liking. I got rid of the "menu bar" and replaced it with the "Main Menu". I don't like the black arrow on the Main Menu so I followed the instructions to get rid of it posted hereI got to the part where I type "sudo make" However, I get the exact error posted hereI tried to follow the solution, I installed libpanel-applet2-dev using synaptic. I tried to edit the "Makefile" in the directory /var/cache/apt-build/build/gnome-panel-2.30.2. However, when I opened this make file I did not find any line calledpanel-compatibility.$(OBJEXT) panel.$(OBJEXT) applet.$(OBJEXT)
View 3 Replies
View Related
Jan 7, 2011
I've just read this thread: [URL] and the information it seems is a bit out of date and a risk to use. I felt more comfortable with the .gtkrc-2.0 file suggested a few posts in, but it doesn't work, in that it turns the panel to the Raleigh-themed one which we always get when there's some kind of error in a gtkrc file, as those of us that have dabbled in theming will know.
It's comical that this minor but unnecessary eyesore goes back so far and hasn't been dealt with, but is there any new info about this, a new method, for 10.10? I don't want to be doing compiling or to risk messing things up, as has been caused by the directions in the other thread, because I've been experimenting with different distros for two years, just bought a new hard drive, and have settled now.
Maybe someone here knows why the .gtkrc-2.0 file hasn't worked for me? I twigged that the panel (though not the rest of the theme, i.e. in program windows) had turned to Raleigh because of those ugly handles pertaining to the Window List panel applet and the one to the left of the notification area. I used the exact file in that other thread, I tried logging out and in and then rebooting, and I even tried pasting the file's contents into the gtkrc file of the theme I use. If you need to know, I'm using the 'Lush' Metacity window border and the 'Redmond' engine.
[Code]....
View 1 Replies
View Related
Jan 10, 2011
has anyone tried to notice the small down arrow thats displayed below ? wonder if there is a way to make that arrow disappear
View 2 Replies
View Related
Feb 15, 2010
9.10 has no menu.lst file and hitting ESC to does not bring up the grub menu. How can we set bootup options or boot an alternate kernel? I would really like to set the resolution at boot time so that my console (Ctrl-Alt-F5, for example) has 80 columns instead of 40. (What a stupid default, gigantic Commodore-64-like text!) It would also be nice if the Login screen could be set to the resolution that I want.
In previous releases, there were ways to do this. In 9.10, I haven't been able to figure out how.
Is there a document explaining all of the radical changes?
View 5 Replies
View Related
Apr 22, 2011
9.10 has no menu.lst file and hitting ESC to does not bring up the grub menu. How can we set bootup options or boot an alternate kernel? I would really like to set the resolution at boot time so that my console (Ctrl-Alt-F5, for example) has 80 columns instead of 40. (What a stupid default, gigantic Commodore-64-like text!) It would also be nice if the Login screen could be set to the resolution that I want. In previous releases, there were ways to do this. In 9.10, I haven't been able to figure out how.
View 1 Replies
View Related
Oct 26, 2010
FC13
When rebooting and in Boot Selection Menu , the Arrow keys won't go down through kernel selections. They just won't move.
Is this a Linux or CMOS problem ?
View 1 Replies
View Related
Feb 27, 2010
I've been searching and searching, trying to find a way to remove the little arrow next to the gnome main menu icon.Found a way by editing gnome-panel/panel-menu-button.c <--- however I cannot locate this in Fedora 12... help me out here, this has been nagging me for quite some time now.
View 7 Replies
View Related
Dec 22, 2010
The first is I seem to have 3 GRUB installs. So whilst I update the one from my live session, the change does not appear in the boot up menu. I had installed 10.10 from a CD into a different partition (sda6), but that will not boot, so I have just deleted this and done another grub install and update. The kernel I am using has just been updated from 10.04 to 10.10 too, and it is this that I use and the Grub I have been working on (sda5).
[Code]...
View 9 Replies
View Related
Aug 28, 2010
I recently installed Ubuntu Lucid Lynx for a friend; for non-technical reasons, the installation had to be to a USB drive instead of writing to the internal hard disk. After reading some online literature on the subject recently, I suspect that the GRUB may be on the internal hard disk MBR instead of the MBR for my USB drive. How can I move the GRUB to another MBR without completely reinstalling it?
View 2 Replies
View Related
Mar 22, 2010
Have downloaded the image twice now and burned it to CD twice. This is a brand new HP 6530b. It will boot to the CD and come up with the ubuntu install menu. I can arrow up and down, but when I press enter on any entry nothing happens. The CD will spin momentarily but then stop. Been trying to make this work for two weeks.
View 4 Replies
View Related
Apr 18, 2010
My boot disk is failing! I am a little nervous, so I'd like to have extra eyes on this so that I don't fubar it.
My setup is as follows, with WinXP and Ubuntu living on completely separate drives:
The boot disk (WinXP with grub2 on MBR) is failing. I need to replace it, pronto.
Do I need to get any data from the MBR on the failing disk before removing it?
Should I make the Karmic disk bootable and install grub on it before removing the failing boot disk?
Once I have Windows (re)installed on a new disc (which will still be /dev/sda) I want to install GRUB2 to its MBR and re-instate the old (current) boot options. How should I do this?
View 7 Replies
View Related
Dec 21, 2010
I have the same problem with an Ubuntu 10.04 live CD. Whenever I attempt to boot (Lu|U)buntu from a live CD/USB, on most computers. it works just fine. However, on two computers, the live media starts off just fine with the main menu (Try Ubuntu without installing, etc.), then, when I select any option except 'Boot from First Hard Disk', after a few seconds, the CD stops spinning or the USB loses power. I'm convinced it's not a problem from the media, since it works perfectly fine on some computers.
Sysinfo:
Code:
Host Name: OWNER-PC
OS Name: Microsoftr Windows VistaT Home Premium
OS Version: 6.0.6001 Service Pack 1 Build 6001
OS Manufacturer: Microsoft Corporation
[code]...
View 1 Replies
View Related
May 26, 2010
I bought a fancy new keyboard a couple of weeks ago, a Logitech illuminated one, and it works great in openSuSE 11.2 . . . after it's booted up. It's a dual boot system, however, and today I needed to get into Windows to do some CAD work, and couldn't! That's when I discovered that the arrow keys didn't work in GRUB. It's the particular keyboard, because I can plug the old one in and the problem goes away. Both are USB keyboards. And it must have something to do with loading a keyboard driver of some sort prior to the GRUB screen, because the new keyboard works fine once the bootup is completed. In fact, I've been using it for a couple of weeks now and didn't notice a problem until today.
View 3 Replies
View Related
Jan 29, 2010
I have windows 7 installed in my internal laptop hard disk and I have installed Ubuntu 9.10 "the Karmic Koala - released in October 2009 and supported until April 2011", on my external hard disk. The problem I am facing is that the GRUB have been installed on the hard disk, for that reason if my laptop have restarted I need the hard disk to be attached to it to load the GRUB and to log in to windows. I need guidance in moving the GRUB to my internal hard disk or return the windows boot loader in charge, so I can boot my windows without the hard disk.
View 3 Replies
View Related
Aug 14, 2010
I'm installing Ubuntu 10.4 DTE on an Acer netbook. The netbook came with Microsoft Windows installed and I'm adding Ubuntu via wubi on a USB thumb drive.
I'm almost done and it is configuring grub-pc. The last line is: Setting up grub-pc (2.98-lubuntu7) ... Then it hangs.
On the web, I find numerous bug reports about my situation, but no work arounds. What do I do?
View 1 Replies
View Related
Mar 11, 2011
I bought a new NVidia Asus EN210 for my HTPC, but I can't get Ubuntu to install.
First I made a live USB disk of 10.10 with Unetbootin and when I choose the option of "try Ubuntu" it starts loading and then just hangs, still showing the menu of boot options. After this I tried Xubuntu on a USB disk. This one also starts loading but then just fails. I also tried XBMC Live. This one does show the Ubuntu 10.04 screen but then just shows a black screen.
After this I found a CD with Ubuntu 10.04, I think or it is 10.10, laying around in my room. I booted it and once I select an option from the install menu it starts to load, but then just gives a black screen with a flashing "-" sign.
The strange thing is, once I pop in the old video card, which is an ATI HD4350, my Ubuntu 10.10 Live CD on USB disk does work and it does get past the menu of boot options (in my second paragraph I describe how this isn't the case with Ubuntu 10.10 combined with my NVidia card).
View 3 Replies
View Related
Jul 28, 2009
I am testing my crash recovery strategy for my linux system and I am having trouble with GRUB. I am basically restoring my backup (i.e. tar) unto a different hard drive, but I am having problems getting the machine to boot without me having to type the GRUB commands at the GRUB prompt that is presented when the machine boots up off the new hard drive. I have tried to restore the MBR in two ways (the 2nd one is the one that gets me to the GRUB prompt):
1. Get the MBR off the original drive and write it unto the new drive (all via dd), but that did not work at all: the machine hangs right away during boot up. It seems to hang right at the point where the BIOS tries to read the MBR.
Code:
On original drive:
# dd if=/dev/sda of=mbr+part.bin bs=512 count=1
On new drive (new drive is now in place of original drive):
# dd if=mbr+part.bin of=/dev/sda bs=1 count=446 conv=notrunc
2. By using the FEDORA rescue CD, I installed grub unto the new hard drive as follows:
Code:
# chroot /mnt/sysimage
# grub-install --root-directory=/boot hd0
reboot and remove FEDORA CD Using the 2nd option above, I get the GRUB> prompt during bootup. I can then boot into the system by issuing the commands that are in the menu.lst file, followed by the "boot" command. However, I would like for those commands to happen automatically, just like in the original configuration. It seems to me that GRUB is actually finding all its stage files because I doubt the GRUB program (the one displaying the prompt) fits entirely in the 446 bytes it has on the MBR. So, it must be loading its stage 2 (and stage 1.5??) files from my /boot partition. However, if GRUB is loading its stage files off the boot partition, why does it not load/read the menu.lst/grub.conf contained in the boot partition also?
Code:
# ls -l /boot
total 22888
-rw-r--r--. 1 root root 1274567 2009-05-27 16:39 System.map-2.6.29.4-167.fc11.i686.PAE
-rw-r--r-- 1 root root 1274538 2009-06-16 22:27 System.map-2.6.29.5-191.fc11.i686.PAE
[code]....
View 3 Replies
View Related
Feb 6, 2010
I installing Fedora 12. I did ALL the same as in the installation guide, GRUB installed into MBR. And after installation and rebooting - nothing happens, after BIOS messages there is nothing - computer hangs. GRUB seems to be not installedI have 2 hard disks. At first I tried to install on the 2-nd drive(it is slave). Afterward I detach one disk and try with only one hard disk(it is master). Nothing changes - computer hangs.
View 3 Replies
View Related
Jan 22, 2010
I've attempted to upgrade my FC9 machine to the latest Fedora 12. I downloaded the iso image onto DVD and booted from the DVD into the installer GUI. Everything proceeded flawlessly until I tried to reboot from the new installation on the hard drive.When rebooting, the word GRUB appears and the system hangs. I've rebooted in rescue mode and the grub.conf appears to make sense, although I can't say that I understand all the entries. Based on some research, I suspect that the problem is ocurring even before grub.conf get read.
Can someone give me a tip on where to begin? I don't expect a detailed answer, but I don't even know where to get started. As far as I know, I have no unusual hardware configurations. No RAID, no booting from USB. The system is old (bought around 2002), but has plenty of memory and storage. One possible clue: my USB keyboard would not work during the installation phase, and I had to replace it with one that plugged into the PS/2 port. USB mouse seems to be fine.
View 2 Replies
View Related
Mar 30, 2011
Durring the upgrade from lenny to squeeze everything went fine but grub2 fails to configure
Setting up grub-pc (1.98+20100804-14) ....
and it hangs, even freezes there...
Is it safe to restart the server, will grub1 still function if I do ?
View 4 Replies
View Related
Jan 25, 2010
I installed fedora 12 to a 4GB flash usb flash drive. When I reboot and select windowsxp, grub displays a blank screen and hangs up.
[root@localhost Terry]# fdisk -l
Disk /dev/sda: 160.0 GB, 160000000000 bytes
255 heads, 63 sectors/track, 19452 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x41ab2316
Device Boot Start End Blocks Id System
[Code]....
View 2 Replies
View Related
Mar 11, 2010
I set my drives up with MY boot loader, and I boot several OSes.I installed Ubuntu and told it to place grub on the / drive, which is where I always put it with any other install and it works fine.I find now that despite telling the install where to put it, you guys have taken it upon yourselves to alter the MBR of the volume ANYWAY!
SO, what I need to do is re-install grub, but I see that you also have no repair facility on this disc either. All I want to do is use MY boot loader. Currently, when I point at the / volume it just hangs with a non-blinking cursor in the upper left.No other Linux installs I have performed over the years do this. I want the drive to boot by merely pointing my bootloader at that volume.It always has in the past, so what did you guys change? I want NO action on my MBR, but I DO want a working grub on the actual root volume, which is NOT the first volume on the drive.
View 9 Replies
View Related
May 18, 2010
single hdd
/dev/sda1 = 100mb Windows7 boot part
/dev/sda2 = Windows7 part ( encrypted w/ Truecrypt)
/dev/sda5 = /boot Ubuntu 10.04
/dev/sda6 = / Ubuntu 10.04
Truecrypt bootloader is in the MBR
The Truecrypt bootloader will boot other loaders if esc is hit, I can choose to boot /dev/sda5 and grub loads, but no menu is displayed, all I get is a GRUB> cli. I've reinstalled Grub to /dev/sda5 using the chroot method outlined in the Grub2 info page on this site, but it always results in the same outcome of ending up in the Grub cli. I can chroot that install and attempt a update-grub, but all i get is "cannot find list of partitions!" attached is the boot_info_script results.
View 9 Replies
View Related
Dec 11, 2010
Once upon a time I had Maverick Meerkat installed on two drives. Now I've used Disk Utility's "Format Drive" to erase it and remove the Master Boot Record partitioning on one of them. Yet I still have to go through the GRUB menu each time I start up my computer, as if there are multiple bootable drives. I've read that 'sudo grub-install /dev/sdb' might work, but that only seems to reset the bootloader, not remove it.
View 5 Replies
View Related
Jan 25, 2011
I have an external USB drive with Mint9 Fluxbox installed on it. At one point, I wiped the drive and set it up using GPT instead of MFT, then partitioned the drive in GParted and installed the OS.
This setup was working fine, but now I have a new laptop, and the OS won't boot. I just saw the errors, "No such partition: UUID=xxx", "Could not find kernel, hit any key to continue". So I attempted to reinstall GRUB via terminal, but saw errors saying that GPT requires a grub_bios partition. So I made a 1mb partition at the end of the drive, (the only unallocated space without moving anything) and selected the grub_bios flag.
I was then able to reinstall Grub without incident, rebooted, selected the USB drive to boot first in bios, but still no Grub menu!?! It just boots from the next device in the bios list.
I'm currently using Crunchbang on a USB stick, which is where I'm running terminal commands from. I want to be able to boot from my external drive on any computer.
View 4 Replies
View Related
Feb 1, 2011
I just restored my Windows partition from SFS so at least it's read by boot info. It says it's booting the Windows partition but it always boots straight into Ubuntu with no GRUB menu at all. Heres my boot info...
[Code].....
View 3 Replies
View Related
