Ubuntu Installation :: Use A KDE Application On A Gnome Interface?
Aug 19, 2010Can you use a KDE application on a Gnome interface?
View 1 Replies
ADVERTISEMENT
Ubuntu Installation :: GUI Interface ONLY To Use Some Useful Administration Tools, No Other Application?
Nov 23, 2010How can I install a minimal GUI interface, on a Ubuntu server? And more: Suse has a RUNLEVEL tool, to select application to be launched. What in Ubuntu? I need a GUI interface ONLY to use some useful administration tools, no other application, and need to charge the system as less as possible.
View 4 Replies View RelatedUbuntu Installation :: 10.04 - GNOME Appearance Settings Missing The Interface Tab?
Apr 21, 2010I tried out the 10.04 beta in VirtualBox, and the tab for Interface in Appearance Settings was gone. This tab allowed you to edit the appearance of Toolbars in Ubuntu. You could edit whether Icons showed up in the toolbar buttons and whether Text shows up beside it. This is kind of a minor annoyance for me; is there any way to edit this option outside of the appearance settings? I'm sure there is (like editing some config file or GConf), but I'm not sure where.
View 5 Replies View RelatedFedora :: No Packages Listed In Gnome Application Manager Gpk-application 2.27.2
Jun 30, 2009I am getting no packages listed in Gnome application manager gpk-application 2.27.2. I have tried 'yum clean all' and get the following error messages.
View 3 Replies View RelatedUbuntu Installation :: Gnome Shell Replace Doesn't Work - No Application Launcher In Upper Left Hand Corner
Mar 4, 2010So, supposedly Gnome Shell is available through synaptic. I just downloaded and installed it and then ran gnome-shell --replace. It doesn't work at all. I hit the windows key and get nothing and there is no application launcher in the upper left hand corner and Alt-f2 produces nothing at all. Alt-tab gives me the option of choosing the windows that were running when I ran gnome-shell --replace but nothing else works at all. Just a vast expanse of digital nothingness. Does anyone know why this might be? I have an nvidia video card (see sig below) and two monitors running from "twin view".
View 1 Replies View RelatedUbuntu Networking :: Forcing An Application To Use Specific Network Interface
Apr 19, 2010How can I force a Wine application (or Wine itself) to use a specific network interface? I have installed hamachi and am trying to play starcraft over virtual LAN. However, when I run Starcraft with hamachi running, it does not work. I have now determined that hamachi creates a network interface called "ham0". How do I force Wine/Starcraft to use the "ham0" network connection? I have looked into forcebindip but it crashes on wine.
View 1 Replies View RelatedUbuntu Networking :: Forcing An Application To Use Specific Network Interface?
Apr 8, 2011How can I force a Wine application (or Wine itself) to use a specific network interface? I have installed hamachi and am trying to play starcraft over virtual LAN. However, when I run Starcraft with hamachi running, it does not work. I have now determined that hamachi creates a network interface called "ham0". How do I force Wine/Starcraft to use the "ham0" network connection?I have looked into forcebindip but it crashes on wine .
View 5 Replies View RelatedUbuntu :: Safely Remove Application - Losing Desktop Interface
May 16, 2011After a fresh install of 10.04, there are many applications which I will never use. I am just scared to remove them, because if I try, I end up losing my desktop interface. And which ones can I safely remove?
[Code]....
General :: Finance - Native Application That Can Interface With Mint.com?
Jul 19, 2011Is there a native Linux application that can interface with mint.com? I like the website, but I would also like to have that information stored locally so I can view it anytime, even if I am not online. Also, is there anyway I can just bypass mint.com altogether and enter in all of my accounts directly and have it periodically update their information?
View 1 Replies View RelatedUbuntu :: 11.04 Classic Interface Is Worse Than Old Gnome 2
Jun 6, 2011I have recently upgraded to 11.04 and am running the Classic interface as I don't like Unity.However, I have noticed so far two areas where this Classic version has gone backwards from the default Gnome in 10.10 and earlier.I can't rearrange window buttons on the Window list, nor can I drag-and-drop say FLAC files onto the button for "Movie Player" any more -they end up pinned on the panel!How can I get back the ability to drag window buttons around and and turn off the annoying pinning feature and get drag-and-drop back?
View 2 Replies View RelatedUbuntu :: GNOME Panel Properties And Interface
Mar 11, 2011I just installed Ubuntu 10.10 to try out right? Well, I tried to expand the height of the bottom task bar to 35, and when I did, it had an graphical issue happen. Its almost as though the image isnt large enough so it starting repeating it to fill in the height. I think I can do screenshots so I can show below. Is there anyway to fix that?
The other question I have is, why is GNOME and KDE both using such larger buttons and drawing then Windows or even MacOS? Can they be made smaller? I can include screenshots for those if I need to.
Ubuntu :: Change UNR Interface To The Regular GNOME Desktop?
Mar 2, 2010I am a simple man with a simple question. How do I change UNR interface to the regular GNOME desktop? IE. Which packages I have to install?
View 6 Replies View RelatedUbuntu :: Gnome Apps Interface Have Become Painfully Slow
May 6, 2010Since I switched to lucid (clean install), the interface has become very slow, unresponsive. I had no such problem in karmic. Switching from one window to another, displaying menus, browsing files, resizing windows etc... take ages to display.Now what is strange, is that this problem only affects native gnome applications.For instance Scribus or Blender run very smoothly, whereas Nautilus, Rhythmbox, Gimp or Inkscape, to name a few, suffer from those horrible lags.I'm pretty sure it's not a driver problem, I'm using the latest nvidia-current drivers, and I tried everything : disabling compiz, disabling metacity compositing, using nouveau, using latest kernels, using xorg server 1.8. No change.
So I know the problem only affects native gnome apps, but now how can I find which package causes this mess ?I just installed a few repos to have some recent graphic apps (gimp, inkscape, openshot, scribus... that's it), but I can't see in what way they could have messed with my system.
Ubuntu :: Will Gnome 2 Style Desktop Interface Be Dead?
May 4, 2011Since Unity and Gnome 3, the desktop interfaces are really changed. I really like the Gnome 2 (classic) interface. I can see every tray icon, every window that opened or minimized at panels, I have my menus, I don't need some mouse tricks to see something. Unity and Gnome 3 are fancy but I don't look for fancy.
Gnome 3 is the next generation. I don't like it. I don't like Unity either. And the problem is Gnome 2 will not be evolved much with its own standard interface because Gnome 3 is arrived. Gnome 2 is getting closer to its end of life. Bugs will not be handled with more attention, compatibilities will be less.So than, I don't like this situation of Gnome 2 either.
General :: Which Versions Use Gnome As Interface
Jun 21, 2010I know only Ubuntu that uses it. Are there others?
View 3 Replies View RelatedFedora :: Gnome 3's New Interface Work On Thinkpad T42?
May 25, 2011right now i have fallback mode on its forced me to fallback mode, what i don't get is on the betas of F15 beta worked just fine and now i just goes right to fall back mode. actually its ok i like it the way it is but is there is list of supported video cards and what not?
View 1 Replies View RelatedGeneral :: Kill X Windows From Gnome Interface?
Jul 4, 2010I just installed Arch Linux with Gnome and gdm is set to boot into gnome as soon as it boots.
But I realized that the barebone gnome package that I installed doesn't include a terminal or a text editor so I can't install anything further or modify the rc.conf file to make it boot without gdm.
Is there a way for me to kill x from the Gnome interface?
Fedora :: Install The Wireshark-gnome Interface - Need Dependencies
Jul 10, 2011When I try to install the wireshark-gnome interface I get a notice about needing two dependencies. One is portaudio and the other is the jack-audio-connection-kit. Seems like kind of odd dependencies for wireshark. Do wireshark really need them? VoIP related maybe?
View 6 Replies View RelatedCentOS 5 Server :: Updates Have Frozen Gnome Interface
Jun 21, 2010Just setup 5.5 as Server-GUI installation last night. Ran latest updates today; it requested a restart; logged in to console; GUI desktop all looked normal at first, except that the panels on top and bottom are empty, except for the menu "Applications Places System" items (upper left) are there, but non-functional. The desktop icons for "Computer, Home, Trash" are functional. Update as I am writing this: The menu header items are now GONE as well, but icons still work (but don't help me).
Problem is, I don't have access to any apps that will allow me to reboot the machine with access to "Shutdown/Restart". If I hit the reset button, will it be OK? Or will it blow up like a Windows machine? Luckily I can reinstall if necessary, but the update thing might crash me again. All was fine before applying updates. Anybody having problems with the latest updates?
Ubuntu :: Which Desktop Application Is Better Gnome Or KDE?
May 14, 2010I am using Ubuntu version 9.10, which desktop application is better Gnome or KDE?
View 6 Replies View RelatedUbuntu :: Application Missing From GNOME Menu?
Jun 30, 2011I downloaded mupen64plus from the software center the other day but I can't find it anywhere! Every other program shows up fine. I tried making a manual launcher and that failed too.... Software center says it is installed, but it simply doesn't show up!
View 4 Replies View RelatedUbuntu :: Stop An Application Autostarting In Gnome And Xfce4?
Jan 16, 2010It seems that the two DEs read from the same damned autostart file as no matter how much I edit the start up menus for each the applications I want to autostart in Gnome but not in Xfce4 just ignore me and bloody well autostart in Xfce4 anyway.
View 4 Replies View RelatedUbuntu :: KDE And GNOME Mixed Application Menu - How To Get Each One Seperate
Sep 6, 2010I have installed KDE from the Ubuntu Software Center. Now I have the following... well, I wont call them problems, rather just annoyances.
1. The mouse pointer is KDE's pointer (I presume) in both interfaces.
2. I have mixed applications in the menus of both GNOME and KDE... GNOME has KDE's stuff and KDE has GNOME's stuff.
3. The Ubuntu screen at shutdown turned to Kubuntu regardless of being in GNOME.
The first and last one is not much of a problem for me, but is there a way of restoring each interface's default menu items? Since I know what I manually installed, I can just enable them again in Main Menu of Administration in GNOME and in KDE wherever that setting will be. If not, can someone maybe just give me a menu list in text or pics (ok, I know this might be asking a lot) so I can at least only have GNOME stuff in GNOME and KDE in KDE.
Ubuntu :: Launch A Graphical Application Using Gnome -schedule
Sep 8, 2010How to launch a graphical application using gnome-schedule ? I got some tutorials about cron after googling . But I couldn't understand the stuff about Screen number As an example, please tell what should be typed in "Task:" to launch say, nautilus
View 3 Replies View RelatedUbuntu :: Running Application Icons In Gnome-panel?
Mar 4, 2011I would like to know if there is a panel widget that works like the Window switcher (switch between windows using buttons) that only shows the icon. I m not looking for something like Docky, just a widget that goes into my panel.
Ubuntu 10.04, Acer Aspire One 10.1" 1.66Ghz 1GB 250GB Dual boot with Windows 7 Blue cover
Ubuntu :: Wiki Edit Application Works For Gnome?
Jun 21, 2011I am trying to edit some wiki pages. Is there any wiki edit application works on Gnome or Lxde?
View 2 Replies View RelatedFedora :: Integrate A Kde Application In Gnome?
Nov 20, 2009how can I integrate a kde application in gnome? I mean like this[URL]...
View 1 Replies View RelatedSoftware :: Gnome-do Like Application For SL6/Rhel6?
Jun 22, 2011I dig gnome-do. Is there a comparable program out there available for SciLinux 6 or RHEL 6?
View 1 Replies View RelatedGeneral :: Ubuntu / Gnome : Open An Application In A Specific Workspace?
Jan 12, 2011How do tell an application to open in a specific workspace?
More info:
I like to have my C++ IDE in workspace 2, my Java IDE in workspace 3, and my email, browser and miscellaneous in workspace four. I also use a shell script that executes upon log in code...
Of course currently it all opens in the current workspace... Is there a way for me to specify which workspace each command should start in?
Ubuntu :: Gnome Session Does Not Save Application After Upgrade To Maverick?
Jan 14, 2011after the upgrade to maverick, gnome-session-save doesn't save applications on shutdown or logout as it did on Lucid.I've noticed the following things:
On Lucid, if I had a stopped job in a shell, the system refused to logout or shutdown, showing a confirmation window. On Maverick, the CPU goes to 100% and then the computer shuts down; on reboot, no application is saved
On Maverick, if there are NO stopped jobs in a shell, I can logout cleanly but only a few applications are saved (eg. terminal, firefox) but others aren't (eg. empathy,evolution) I've checked "Automatically remember application on exit" in "Session management" menu.