Ubuntu Installation :: Unable To Get 10.10 Dual Boot
Mar 25, 2011
I have a fairly old Dell Dimension 8400 with two disks. I have Windows XP on the first disk (750GB) and have a second unused 200GB disk that I installed Ubuntu 10.10 onto.
Here are the problems I had:
1) After the install, the computer would only boot into Linux. I had no options at all at boot up for which OS to boot into.
2) I verified that my 750GB WinXP disk was still intact (/dev/sda). I tried created a file for WinXP in /etc/grub.d taken from the 40_custom file. I added a menuentry section to it and ran grub-update. grub-update complained about an error ddf1 invalid # of disks in RAID partition.
3) Ubuntu didn't seem to know about my Linksys AE1000 wireless adapter. And since I has no Wireless on the computer, I couldn't download drivers.
4) I rebooted the computer after trying to update grub and now my PC boots into Windows again.
I expected to install Ubuntu and then have grub2 give me a choice of WinXP or Linux. Why did it intitally boot only into Linux, and why did it strangely revert back to WinXP later on?
I have Ubuntu 10.04 LTS and Windows XP installed on my laptop. Usually when booting, I get the GRUB 2 menu and I can boot into either Ubuntu or XP.I was playing around with EasyBCD, then after trying to remove it I was unable to boot into Windows, I used a Windows 2000 CD recovery console to fix the MBR (using: fixboot and fixmbr).Now Windows starts up when I power on, but I don't get the grub menu anymore with an Ubuntu option. If I boot from the Ubuntu Live CD and try to mount my Ubuntu partition (/dev/sda5) I get this error:
mount: wrong fs type, bad option, bad superblock on /dev/sda5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try
After installing karmic with Grub2 I am unable to boot into Archlinux partition. Grub2 has removed the last line of the Archlinux boot stanza! It used to read:-
[Code]....
Following the Grub2 tutorials I have tried editing /etc/grub.d/40_custom as follows:-
[Code]....
But no luck. Only way into Archlinux is to get into the edit shell and manually add the missing line and remove other stuff not needed. I have spent hours trying to resolve this issue and I am fairly p----d off
I have two separate hard disks, one having ubuntu 10.04 and one having Windows XP. I'm unable to get an option to choose from grub menu as to which operating system i want to boot into.
fresh installed F12 on secondary drive, XP on primary drive. Then swapped drives making F12 primary. I boot into F12 fine, I also get menu to boot Other but when I choose this option instead of going into XP I get error 22 no partition? I can swap the drives around & boot into windows fine. I know I must not be pointing or having F12 pointing to the correct partition for XP.
I am trying to install ubuntu 10.04 on windows7.windows 7 was already installed.I ollowed these steps to install ubuntu 10.04.1)First i made some freespace in hard disk to install ubuntu using windows7 default options(By shrinking).2)I used USB drive to install ubuntu.I made it bootable using unetbootin.3)I followed normal steps install(language,area,keyboard,using manual partition i installed ubuntu in free space,etc).4)I got boot menu when it restarted.PROBLEM isAs long i use only ubuntu (boot into ubuntu --shutdown--boot into ubuntu --shutdown) it works well.
If once i boot into windows 7 and restart the system i am loosing boot menu options.The following error i am getting"no module name found Aborted.Press any key to exit".If i press any key,I guess its trying boot using internet and lastly it says Operating system not found and hangs.
I've just installed Fedora 10 onto a box which had XP and Knoppix dual-booting. XP is on 1 HDD and Knoppix and Fedora share a second HDD. I installed from Fedora Live CD and accepted the Fedora MBR when it came to that option. I edited the Fedora MBR to show Knoppix residing on /dev/sdb1 (with Fedora on sdb2). XP boots without a problem, however, when I try to boot into Knoppix, I get the message "invalid or unsupported executable format".Following advice in other strings, here is my grub.conf file entry:
# grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file # NOTICE: You do not have a /boot partition. This means that
[code]....
Finding another post on MBR problems, I've tried, also without success, amending the grub.conf file as follows:
I have win 7 and F13 installed on my computer but I am having trouble setting up dual boot so I can choose to boot F13 or win 7. I have tried to set up grub, how to install grub and set up a dual boot so I can use F13.
I have the following PC set up: Dell 8400 with 3 GB of RAM with 3 160 GB SATA drives: The first one has Windows XP installed on it. The second one has been newly formatted and Ubuntu 10.04 has just been installed on it (20 GB / and 6 GB swap) with grub being installed on the first partition and not the master boot record. The remainder will be for storage for Windows. The third drive is simply storage for Windows.
At this point I am able to boot XP just fine, but I'm not able to boot Linux. I just getting a blinking cursor or the PC just reboots when I choose Linux. I believe I have set up my boot.ini properly using: C:Bootsectc.lnx="Linux Ubuntu" After running dd if=/dev/sdc1 of=bootsect.lnx bs=512 count=1 and putting that file in place.
For reference, I don't believe this is a Linux problem, as much as I am simply trying to guide the ntldr to be properly pointed to a place where it can boot Linux. When I go into the bios and disable the first and the third hard drives, grub pops right up and I'm able to boot Linux with no problem, so that piece is fine. I think it's just now trying to get the correct syntax so I can boot Linux without having to disable drives and reenable them.
For kicks I even tried these syntax types in boot.ini: multi(0)disk(0)rdisk(1)partition(1)="Linux11" (i.e. 2nd disk, 1st partition ...etc...)
I read many troubleshooting documents on dual booting and so forth but I just can't get this right. For reference, I stated the way XP views my Hard Drives in the intro, which seem to be a different order than Linux sees them, yet I believe I've tried all the combos of settings for this to work (yet clearly have not). I have attached the output of boot_info_script*.sh here: [URL]. Boot Info Script 0.55 dated February 15th, 2010 ..... Devices which don't seem to have a corresponding hard drive.
I run Lucid on ext3. I really miss not being able to reach Lucid from my dual boot Vista.I have installed the latest fsdriver. I have also tried this:[URL].. which does not work. (Is it because fsdriver is still in the system?) I also tried these methods but to no avail.[URL]. The problem seems to be related to fsdriver not being able to handle ext3 with Inode size = 256. Going back to ext2 for only the home partition seems complicated?
Drive #1 (sda) Master CS Ubuntu 9.04 grub upgraded to grub2 version 1.96 Drive #2 (sdb) Slave CS Ubuntu 9.10 grub2 version 1.97 /boot is (sdb1) root is (sdb5)
grub2 is installed in /boot (sdb1) and the mbr of (sdb)
I want to be able to boot drive #2 from drive #1 grub menu at boot time. I have run �update-grub and it probes and finds (sdb5) and creates a new grub.cfg called grub.cfg.new in the /boot folder, but the new cfg file does not show (sdb5) or (sdb) it shows all other changes that I made such as splash screens and they are working. How do I get it to recognize drive #2 with Ubuntu 9.10. I can boot each drive independently of one another and I can boot 9.04 with 9.10 if I swap the drives around. And run update-grub The auto probe is working in the Ubuntu 9.10 and may be working partly in the 9.04.
This may or may not be a problem, but is a pain anyway. When I run update-grub in 9.04's grub version 1.96, it does not change anything in the current grub.cfg it does make a new file called grub.cfg.new I have to go into /boot/grub and change grub.cfg to old and change grub.cfg.new to grub.cfg I do not have this problem running the same command in Ubuntu 9.10's grub. It finds changes and os's and automatically updates the current grub.cfg
I am unable to load Ubuntu onto computer as dual boot or inside windows. Thus scanned the CD and found it has 23 errors.Are these files suppose to be on the CD?casper, .disk, install, install, isolinux, pics, pool, pressed, autorun, md5sum.
I had a dual boot system with 3 partitions, Windows 7 on one partition, and Windows XP on another partition and a Data partition. I decided to load Ubuntu 10.10 on the Windows XP partition.During installation I selection manual partition, and deleted Windows XP.after successful completion of Ubuntu installation "Grub" directly boots into Ubuntu, it doesn't show me the OS selection screen. After following some forum posts I did an update grub
Code:
Generating grub.cfg ... Found linux image: /boot/vmlinuz-2.6.35-22-generic Found initrd image: /boot/initrd.img-2.6.35-22-generic
I have a Sony VPCZ13C5E with Intel Core i7 M640 @ 2.8GHz and Windows 7 Prof 64 bit. It has 4 x 122GB SSD's in one Volume type Raid 0 using Intel Rapid Storage Technology.
The installation prog did not offer to install alongside an existing (Win 7) system, however after installation I was able still to boot Win 7 from the Grub Menu, but the Linux option just gives the black screen of death.
Booting from the 10.10 LiveCD and running sudo fdisk - l gives "unable to seek on /dev/sda". Also I have had a message "unknown filesystem type 'isw_raid_member' although I have forgotten where that came from!
The LiveCD shows that the filesystem does seem to have installed OK on the ext4 partion of 100Gb which I had kept for it, however it will not boot.
The results of Boot_info_script are shown in the attachment Results.txt
I have tried sudo mount /dev/mapper/isw_dijbjabefg_Volume07 /mnt and it gives no errors.
I then tried sudo grub-install --root-directory=/mnt/ /dev/sda which gave no errors but when I reboot and choose Linux the result is still the black screen of death.
I understand that the problem may be one of Ubuntu drivers having to catch up with the latest technology but given that Ubuntu can partition the swap file and the ext4 system I seem to be so close.
I am quite experienced user of Ubuntu desktop / server distributions. Recently my desktop 9.10 disk failed and I decided to reinstall using 10.04. My configuration is a dual disk dual bot system. I have XP Pro SP3 on one disk and Ubuntu 10.04 on second. XP has own, untached MBR ubuntu got Grub 2 installed on the same disk as Ubuntu. Ubuntu disk is booting first in BIOS. Grub 2 detected both system, however I can boot only to Ubuntu. When I am trying to boot XP I got black screen only. Looks like booting is stack in BIOS stage, because crt+alt+del reset system.
I read Ubuntu forum, search Google and did not come with any solutions. My XP MBR is OK. I can boot directly, choosing XP HDD in BIOS as a starting disk. All entries in grub.cfg looks fine to me. I made 3 different clear installations of Ubuntu. Each with the same result. I reinstaled Grub2 with no effect. I wonder if this may be a hardware/Grub 2 compatibility issue. I am using quite old components.My motherboard is Assus P4C800 Delux. I have 5 HDDs 2 CD. Exactly the same configuration was OK with 9.10/XP dual disk dual boot using Grub legacy.
i have a dual boot, struggling on windows because my wlan wont work.i need to get the drivers but cant find the right ones, i have enclosed above the netowrk info i got from the terminal in ubuntu,
I have made a complete mess of a Lenovo T500 Win 7 and Ubuntu dual boot system. I won't go into a long story of how and why I did what I did but jump to the final mess I have. Win 7 is still on the machine it's original partition. Lenovo's recovery partition is still there. The linux swap partition is still there. The partition Ubuntu used to live on is still there but through my own errors unallocated. GRUB is broken and reports this message on boot.
error: unknown filesystem. grub rescue>
I can boot from the Live USB and see what remains after the mess I've made. Attempts to reinstall Ubuntu onto it's original partition fail because the installer cannot see it. It wants to put Ubuntu into the Win7 partition.I cannot use the ThinkVantage button or F11 to access Lenovo Rescue and Recovery to restore the machine to factory settings and then reinstall Ubuntu.
I cannot use the methods described in other threads on this forum to fix a broken GRUB requiring a Win7 rescue DVD because I don't have one. I have come to trust Lenovo's hidden partition with rescue and recovery files to restore the machine to factory state. (This is my 3rd Lenovo, but my first Win7)
All important files have been backed up, recovery is not necessary.In the end I need to be able to boot into Win 7. This is a work computer, others use it from time to time and don't want to use Ubuntu. So wiping the entire HD and running Ubuntu is not an option. I would like to leave Lenovo's hidden partitions intact as they are usually a good way to recover from a mess. I would very much like to have Ubuntu back as I prefer it to Win 7, Vista and XP.
I can boot from the Live USB into Ubuntu 10.10 and see that the Win7 OS and Lenovo hidden partitions are still there. Attempts to install a fresh copy of Ubuntu 10.10 are not going well because the installer cannot find the partition Ubuntu was first on.
1 - fix or remove GRUB
2 - use GParted to repair my damage to Ubuntu's partition so that Ubuntu's installer recognizes it
3 - reinstall Ubuntu
My unskilled messing about has left my HD partitioned as follows as reported by GParted Partition...........File System.......Label....................Size........ ....Used..............Free..............Flags
I have a e-machine x64 machine, running win 7 home premium. I have tried to run WUBI, and do a side by side install, but either way, I cannot get it to dual-boot. Any ideas? Comments (other than trashing Win-7?).
I had a perfectly working basic 13.0 install on hda4; I installed 13.1 on hda1 and added lilo with an entry for each using expert mode during setup but now neither will boot from this lilo (both try but fail along the way; 13.0 comes up with some errors about sda and 13.1 screen turns black and does nothing) During the 13.0 startup it seemed to use the 13.1 kernel as there was a penguin in the top left instead of the "cat wearing a mask" image that usually shows when it boots.
I think 13.1 installed perfectly and the screen going black is another issue (I don't know why I think that but I just feel it did, it gets further along in boot up)I've managed to get 13.0 back up and bootable by chrooting in and reinstalling lilo but strangely I had to go into its lilo.conf and change sda4 back to hda4 (before this install it had been hda4 and I can't understand why it had changed) I'm running an advent 7101 laptop and have had 12.2 and 13.0 dual booting previously.
I have a (slightly complicated) dual/multi boot system.
I keep getting boot errors (when choosing ubuntu from the grub2 menu)
Code: Serious errors were found while checking the disk drive for /boot
If I switch off and restart, ubuntu will then start without issue.
My setup is like this ....3 disks, one with 10.10 clean install - so Grub2, separate partitions for /, /boot and /home, one with windows 7, one with windows XP and 10.04 wubi (this is my old disk which I will trash once I'm happy with my upgrade to 10.10 & 7 on separate disks.
I installed 7 and 10.10 with ONLY their disks installed. After both were working, I added all disks and rejigged the grub2 menu (using update-grub and StartUp-Manager).
This problem only seems to occur if my previous boot was not 10.10 ( I will investigate this further). It's as if something (grub2 ?, the bios ?) is remembering part of the previous boot and not using the grub2 menu completely.
I'm running 10.04 on Wubi in XP and want to partition to dual boot properly. I've done the permanent grub-update issue fix for Wubi so I've got the time to figure this out, I'm just at an impasse right now.
I've tried both GParted and PartitionMagic Live CDs and have been unable to shrink my main partition down. It's currently at 45 or so GB with about 22 GB empty. I've turned off my virtual memory in XP as well and no dice. I keep getting the error in GParted during the shrinking process. It doesn't really explain why, though.
I had a dual boot machine with fedora 12 and windows vista and I could use grub boot-loader to switch between two. Few days ago windows got corrupt and I have to reinstall it. I put windows 7 now and as usual it erased grub. So to reinstall I put the fedora 12 installation CD on and followed some usual setup steps. When I got the command line I issued the command "grub-install /dev/sda" (sda not hda because It showed bunch of sda, sda1..) but surprisingly it said grub command not found. I remember doing it before while it worked fine.
i just installed ubuntu 10.04 on my imac. i can play videos from videos no problem but when i try and play avi, mov or any other video format, the movie player quickly opens and closes. when i try with vlc player, i see the player bar but no video. when i try with smplayer, i can watch the video but when i go full screen, the movie doesn't take up the whole area of the screen. it stays at the same small size.
what do i need to do to make this right? i installed the ubuntu restricted extras. did i miss something?
I am new Linux, but have already installed a new HDD in my PC and successfully installed Fedora 14. Unfortunately, I am unable to configure my system for dual boot and my PC always boots right up into Windows Vista which is the original OS on my original HDD. I have searched the web, but only find examples of splitting partitions and dual booting into different versions of Windows. I apologize for the simple question, but I am certain that someone in here can point me in the right direction. My intention is to migrate to Linux entirely, but want to learn Linux before completing a full migration.
I am having 320G of HDD , on the HD i m having 40G free space when i m trying to install rhel5.4 in the free part it is showing me this error
Could not allocate partitions as primary partitions: Partitioning failed: Could not allocate partitions as primary partitions.Not enough space left to create partition for /boot.
Have just installed 9.10, again, many failed attempts previously.Cannot get to boot up and show menu on dual boot with Vista initially,However when I delete the grubenv file the system boots ok and works fine.But does not show the grub menu to choose boot up choices.Got the information to delete the file on some posts elsewhere about booting problem, and tried a longshot and got into Ubuntu for the first time from trying to install now for 3 months!The problem is the file grubenv is created each time so on subsequent boot ups the sytem fails to boot again.The Grub version is 1.97 beta 4, most up to date for Karmic I think, I have seen a version 1.98 but dont think its for Karmic?
Is there a way to modify the grub.cfg file to stop this problem ( all posts say dont touch this file??Or install a script to delete the grubenv file on shutdown as a workaround for me, (I have no idea how to do this whatsoever, I'm not familiar with linux at all)I did read that this problem was fixed/patched in Grub version 2, but dosn't seem.so on my system afetr I updated it when I got into Ubuntu.I couldnt find the patch or fix, I got the information I am on about from this post:URL...It seems to say it was fixed or patched by Colin Watson reading through, but I don't really understand whats being said or how to get the patch on my system if indeed there is one?Sorry for being a bit thick about all this, its a bit beyond my brain now, hope somebody can help out as I have enjoyed my brief bit of fun in Ubuntu.
I have a netbook running Windows XP as standard. There is also a recovery partition which came from the factory.
In the past I installed Ubuntu (I think 9.something) from USB key and all worked fine. However my XP became corrupted and I needed to do a repair on it. After this, Ubuntu became removed from the boot select menu.
Since then, Ubuntu has become updated to 10.04, which I now cannot install.
The Live CD tells me there is a "file IO error" and simply stops installation at around 70%.
I did manage to get into Ubuntu from a Live USB using Wubi. However when I chose to install Ubuntu to a Harddrive, the option to "install side by side" was missing.
After reading on the forums, I did a chkdsk /f on Windows and tried again. Now my liveUSB does not show a boot menu!
When I select to boot from USB stick, the screen goes blank with a flashing cursor. Ctrl+alt+dlt reboots.
I'm really lost here! It seems when I fix one problem, another problem arises!
Also when trying to instal Ubuntu within Windows, the process goes through to 100% and asks me to reboot. When I do so, the option for Ubuntu does show in the boot menu. However when I select it, I get an error "Windows boot failed: file wubildr.mbr and status: 0xc00000f - something is corrupt".
