Ubuntu Installation :: Server Install Fails At Insert Disk?
Sep 24, 2010
i downloaded Ubuntu server from here, choosing 32-bit:[URL].. i burned the image to a CD. i booted it, and tried to install it. i went through a bunch of screens before it started to install. after a while i got an error message that reads: "Please insert the disc labeled: 'Ubuntu-Server 10.04.1 LTS _Lucid Lynx_ - Release i386 (20100816.2)' in the drive /cdrom/ and press enter."
i don't understand this message. when i downloaded Server there was no message to save a second file for a second CD.
i downloaded Ubuntu server from here, choosing 32-bit: [code]... i burned the image to a CD. i booted it, and tried to install it. i went through a bunch of screens before it started to install. after a while i got an error message that reads: "Please insert the disc labeled: 'Ubuntu-Server 10.04.1 LTS _Lucid Lynx_ - Release i386 (20100816.2)' in the drive /cdrom/ and press enter." i don't understand this message. when i downloaded Server there was no message to save a second file for a second CD.
I am installing a number of boxes with RHEL 6, using a kickstart file I made and put on a boot disk.I am having trouble, however, when using this disk. The boot loader recognizes my kickstart file, but when it prompts me that it can't find the RHEL distro on my disk, and that I need to insert the DVD that contains the distro, I cannot eject the CD. Button pushy, no ejecty. I tried a paper clip to open the drive, but even after inserting the distro disk this way, it doesn't see it. It's like anaconda is wrapped around the mount of the boot disk and won't let go.
There's nothing special I need to have in the kickstart file for this to work right? I have thought about putting an eject statement in the post section, but that isn't even used until the OS is installed is it? I can get around this by creating a distro DVD with my kickstart file, but I'd rather not do that, and use the kickstart/boot disk functionality as intended.
had 9.04 install on a dual proc home built system that was running fine until a recent update wiped out grub. Since I have all my data backed up, I decided just to install 10.04. I select Use Entire Disk but when Ubuntu tries to install, I get this error:The ext4 file system creation in partition #1 of Serial ATA nvidia_dacaecb (mirror) failed.
Downloaded Ubuntu 10.04.1 Desktop AMD64, tried to install it to a cleand HDD using the whole HDD, i.e. gave it permission to use the whole HDD. Installation process appeared to run OK but when it came to the restart it just fired up the message error: out of disk grub rescue>
I've searched this forum and found numerous references to these error messages but cannot make head nor tail of the diagnostic suggestions. Apart from anything else they suggest strings of command lines which I don't understand and can't enter anyway since they don't correspond to my keyboard layout (if I hit > or ) something completely different appears on the screen). Is there someone here who can provide a step-by-step solution in lay language? Or is there such a thing as a bootable file which can be downloaded and inserted into my CD drive to correct this problem?
As I have no blank cds handy right now, I had to go the way descirbed here:URL...But when I seect my partition and / (no sub dirs, an empty ext3 formated 6.8GB partition, exclusivly for that usage) it tells me there ws no installation media found and the search path got automagically adjusted to /imges/image.img.And ideas howto fix that? Or how to install fedora from harddisk (without big fuss)?
Downloaded Ubuntu 10.04.1 Desktop AMD64, tried to install it to a cleand HDD using the whole HDD, i.e. gave it permission to use the whole HDD. Installation process appeared to run OK but when it came to the restart it just fired up the message
error: out of disk grub rescue>
I've searched this forum and found numerous references to these error messages but cannot make head nor tail of the diagnostic suggestions. Apart from anything else they suggest strings of command lines which I don't understand and can't enter anyway since they don't correspond to my keyboard layout (if I hit > or ) something completely different appears on the screen). Is there someone here who can provide a step-by-step solution in lay language ? Or is there such a thing as a bootable file which can be downloaded and inserted into my CD drive to correct this problem ?
Can I install fedora 14 and Cent OS5.4 on i3. ? I have fedora 14 and Cent OS 5.4 install on core 2 duo. Can I insert the same hard disk to i3 pc, will the previous os will boot ? or will I have to format and load the fresh one ?
Today, I was downloading some stuff from online. I left for a few minutes and came back to find that someone had hit my loose power cord, causing the computer to restart. When I completed the reboot (It always says "Insert system disk and press enter" after checking CD drives), and had it load OpenSuSE 11.3 Failsafe (Regular won't work for me), it loaded into Teal (BASH, Command Prompt, Kommand, whatever you want to call it). At first, I thought maybe I screwed up and told it to load into that. But, I tried again, and it did the same. I tried using Non-Failsafe, and got the same results. I am able to edit, add, or remove programs from the Linux partition, though.
I bought a t770.uk HP desktop PC, which came without a Hard drive as the pervious owner had removed it for security reasons. A week later I got a hold of a brand new - out of an anti-static sealed bag - compatible Western Digital Caviar SE 80GB SATA150 7200 HDD, and installed it as directed by my t770.uk manual. Up until now, things looked to be on a roll. As I don't have any windows OS, I figured Ubunutu would be the way to go (and it certainly is from what I've heard and read about it. I can't wait!).
So I sent off for a CD and it popped through my mail a few weeks back. The problem that I am having is after booting past a very brief view of the HP POST screen, the screen goes black with the error "Disc boot failure-insert system disk and press enter". I've tried placing the Ubuntu disc in (assuming it is asking for that? An OS disc) and restarting, and changing the boot order around, but no matter what I do the error persists and I can't install Ubuntu. I really want to get this PC running with Ubuntu.
I am trying to install openSuSE 11.4 on my IBM xSeries 440 Server and I am not having much success. I am getting to the welcome screen and installation menu screen fine, but when I select the 'install' option it loads the Linux kernel up to %100 and then just goes to a black screen from which the only escape is a reboot, the same thing happens when I select 'check installation media' and 'Firmware test'. I have tried the 'no ACPI' and 'safe settings' setting and still no luck.
I have successfully installed Windows server 2003 Enterprise edition on this machine so I know the hardware is ok.I suspect it could be a driver issue, but as I am very new to Linux and server installations I am grasping at straws.
I was going to set up an ubuntu server, but ran into some issues. When I try to install ubuntu server 9.10, it immediately goes to a black screen with a blinking cursor as soon as I press enter on the menu. I've tried pressing F6 and editing options - noapic, nolapic, irqpoll, vga=[something...] and nothing worked. I then downloaded a standard ubuntu desktop cd, and the livecd works, and I can successfully start the install!
I've heard that I should probably use the server install if I want to use this as a server (which I do; webserver for a group of people, website, ftp, ssh.) I've also heard that it's possible to just install everything needed overtop of an ubuntu desktop base. What should I do? Are there other things I should try to make the server install work? Or is it not worth the effort, and I should just go with a desktop install and then work from there? tasksel? (It's a Dell XPS, the graphics card is NVIDIA Geforce 9800 GT).
Have burned a DVD of 11.4 64bit and am trying to install alongside Windows 7. The boot from the disk starts, I get a SUSE splash screen and initial menu. I check install source (F4) is set to CDROM. When I then select "install" the kernel loads, but then it goes wrong. Whatever I do I get "No repository found". It's almost as though, having loaded the kernel from the DVD, the installer can no longer see the disk.
I've installed Ubuntu Server V9.10 (64-bit) on a brand new server I built with no previous OS installed. The drives are two Hitachi 1 Tbyte hdd's configured as RAID1, an ASUS M4A78T-E motherboard with an AMD Phenom-II cpu with 8 Gbyte of memory. I updated the bios following building the computer. The Ubuntu 9.10 server installation appears to go without error. However, on reboot I get the message:
Grub loading error: no such disk grub rescue
I suspect the MBR is missing or Linux is not pointing to the correct drive in the grub.cfg.I've made sure the boot order is correct, but other than that I don't really know the commands or syntax to troubleshoot this problem. The only CD I have is the Ubuntu 9.10 server ISO I downloaded and burned to dvd.
I've installed Ubuntu Server V9.10 (64-bit) on a brand new server I built with no previous OS installed. The drives are two Hitachi 1 Tbyte hdd's configured as RAID1, an ASUS M4A78T-E motherboard with an AMD Phenom-II cpu with 8 Gbyte of memory. I updated the bios following building the computer.
The Ubuntu 9.10 server installation appears to go without error. However, on reboot I get the message:
Grub loading error: no such disk grub rescue
I suspect the MBR is missing or Linux is not pointing to the correct drive in the grub.cfg.
I'm a noob to Linux. I've made sure the boot order is correct, but other than that I don't really know the commands or syntax to troubleshoot this problem.
The only CD I have is the Ubuntu 9.10 server ISO I downloaded and burned to dvd.
The Install program is failing to see the hard disk!
Now heres the really weird bit. The live cd can see the drive just fine.
I have created partitions using gparted and the disktool also sees the drive just fine but as soon as I go back to the installer it shows no hard disk!
It's a SATA drive which I suspect might be a part of the problem.
Is there a way I can install without the install program?
Is there a way to make the install program see the drive?
I've been struggling with suspend to disk (hibernate if you prefer) for a while, it works after a fresh boot and for several days' worth of overnight hibernation as I go about my work, but eventually it stops working - it gets to the splash screen but the bar only makes it a little way to the left before stopping, and then after a timeout the system just returns to the "session locked" screen - no real error messages.
I've done my best to try to find out what's causing it to break but I'm really struggling, the suspend process doesn't appear to write anything helpful to the dmesg log or the /var/log/pm-suspend.log - the only thing that I've seen at about the right point in time is cifsd, but I can't be sure that it's a problem with cifs as hibernate continues to work immediately after mounting windows shares with cifs.
I am new to Linux and I'm trying to install OpenSuse on my machine: AMD Athlon 64 3200+ / 2.0 GHz ATI Radeon Xpress 200 512.0 MB DDR SDRAM ATI Radeon Xpress 200 Shared video memory (UMA) DVD-RW 16X TSSTcorp CD/DVDW TS-H552B drive Western Digital WD3200AAJB 320GB Hard Drive
I downloaded the ISO for version 11.4-i586 DVD size from DirectLink on opensuse.org. I checked the Windows MD5CHECKSUM and verifyied it. The installation goes fine until it begins installing packages when it prompts: "Insert Disc 1" Which I believe is the Disc that I burned already with the ISO file and is in the DVD-ROM drive that it's asking for. This happens for several files, and prompt me to either retry/skip/abort/cancel If I click Retry I get "media1.media not found" or a similar message. If I click Abort/Skip/Cancel the installation stops and takes me to a text version of the installation which then stops and says that it can not find the Installation Package either.
I have looked for reasons behind this but all I could find was possibly Mounting the DVD-ROM but the installatin runs fine until it begins looking for specific files and says it can't find the files on the Disc, even though it's in the DVD drive.
I'm attempting to install F13 on a server that has a 2-disk RAID setup in the BIOS. When I get to the screen where I select what drive to install on, there are no drives listed. The hard drives were completely formatted before starting the 13 installation. Do I need to put something on them before Fedora will install?
New Toshiba satellite model L505D-S5983 used for Fedora 11 install. Install dvd and computer responds with what do you want to do...I enter "install"begins uery.. English-->US---then "unable to locate driver"/select driver...."What driver do I need to select or obtain?
Today I installed Fedora (I need it for school), but not everything seems to work fine Before installing Fedora on my Macbook I had a triple booting machine: Mac OSX snow leopard, Windows 7 and Ubuntu. (using rEFIt) All of them where working. Since I installed Fedora on the 4th partition I can only boot Mac OSX. When selecting one of the other OS's it says: "no bootable device insert boot disk and press any key"
I'm trying to do exactly this: [URL] the first time i did it, I made it and everything was fine, except I didn't know what "installation size" meant in wubi, so as I selected 3GB, the rest of the partition was left empty and I didn't have enough space for ubuntu. Then I formatted the partition again and reinstalled ubuntu. Since then while it's booting, I get the message Disk boot failure insert system disk and press enter. I tried reinstalling many times, but I still get this message..
I am kinda new to Linux but because I started a linux-course I decided to install it on my desktop. Before I used Virtual Box or VMware so it was pretty straightforward but now I have a problem with booting into Win7. I decided to install Debian along with my Win7. From a hardware perspective the things are like this, I have 3 HDD, 2 on a RAID0 and the third will be the one with Linux. On the RAID0 matrix I installed Win7 first, all ok there.
Then I started installing Debian. I followed the installation wizard, I partitioned the 3rd HDD and selected it as the drive for Linux. Then after I installed Linux and rebooted I only saw Debian in the GRUBs boot options, no sign of Win7. I think it has to do with the RAID0 matrix which "houses" Win7. I disconnected the 3rd HDD, and now when I try to boot no sign of the Win7 bootloader thou the RAID0 is ok. The only message I get is "insert boot disk".
Having trouble installing 'Squeeze' 6.0.1a-amd64-netinst on a new AMD64 system.The installer boots and runs fine until it gets to hard disk detection. Then it hangs for about 20 minutes showing a blue screen, during which time the HDD-activity light flickers every 5 seconds. Eventually it says it can't detect a hard disk, and displays a (longish) list of possible drivers; no idea which, if any, would suit.Anyone else installed (successfully or otherwise) on this combo?
I'm running Kubuntu Karmic on my Dell Inspiron laptop - about 200 bug fixes behind because my only available internet is a cellular connection on a crappy wi-fi router - and last night, I suspended it, but it shut down instead. Not a problem, it does this fairly often, figure the RAM gets jostled or something.
But when I go to boot it up, it gets stuck at the pre-loading screen before getting garbled and dropping to the shell, where it says "mount: mounting /dev/disk/by-uuid/[insert hex code here] failed: invalid argument". Of course, mounting /root/sys, /root/dev and /root/proc fails, (directory does not exist) and it gives me the busybox initramfs prompt.
I am trying to upgrade RH9 to F10. I have downloaded dvd iso image i386. The SHA1 integrity check passes. The installer fails media check due to "errors". I did an independent verification of the DVD and zero errors found. Download was from Fedora's own torrent, so files should be verified anyway. If I bypass the media check I get the message : Running anaconda 11.4.1.62 the Fedora system installer - please wait.....
I have xp/fc8 on an older ide drive and just installed a new sata 1T and planned to put fc10 on it but in the process I killed my fc8 installation. I told the installer that the other disks were off limits but it was somewhat confusing at the bootloader page. So, I suspect that I told it boot off the fc8 disk. If that is the case is there a way to restore the fc8 install by somehow rescuing the /boot partition on the fc8 disk?
