I'm trying to install screem in 10.04. I can't find the package... where did it go?
Code:
sudo apt-get install screem
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package screem
Ubuntu Server Edition, 32bit, fresh install today (2011.07.07). Usually the first thing thing I do after a server install, I update, upgrade... then install Emacs to configure services. I can get to it from my other servers and PC's, have an internet connections from that server // so I know things should be okay...
I'm thinking maybe it's a repo problem in my source list... and I'm not sure what repo Emacs is from. I'd like to check this, before doing a reinstall on this. I had just added in the mounts & fstabs on my data RAID arays... Would be more work, but still not too far into it.
I am attempting to install some applications on Debian 8 Jessie, with Gnome Desktop, and every package I try to install keeps coming up with the error E: Package Not found, I have been searching then trying for a solution on the Web, which includes apt-get update, and there are none for Debian 8 at all.
View 14 Replies View RelatedI'm trying to install Gnomad and have got this far. I type ./configure and everything looks like its kinda working then it says
"No package 'glib-2.0' found
No package 'gthread-2.0' found
No package 'libnjb' found
No package 'gtk+-2.0' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables GN_CFLAGS and GN_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details."
I have just downloaded the Screem text editor source from their website.I tried to aptitude it first, but it wasn't available in the repos. So I thought maybe building from the script would be the solution. The problem is, this package doesn't build with the usual configure, make and make install commands.Well ./configure works. It checks the system and dependencies.
View 7 Replies View RelatedPretty much self explanatory:This morning I went into the update manager, and found a bunch of RPM package-management stuff such as rpm, alien, compiling tools, etc. What is up with this?I suspect they are setting the scenery for some big press release saying they now support RPM packages in Ubuntu too. Any ideas? (or better, inside info from someone who knows)
View 3 Replies View RelatedI am trying to install kcachegrind and during the ./configure phase I got the following error:
Checking for Qt... configure: error: Qt (>= Qt 3.0) (headers and libraries) not found. Please check your installation!
Now I guess I have QT installed and I tried to do the following:
./configure --with-qt-includes=/usr/lib64/qt4/include
but that did not work either.. actually checking further I found that the folder include is missing in usr/lib64/qt4/ !!!!
So what should I do... for you info I am listing below the output of:
yum list *-devel | grep -i qt
qt-devel.x86_64 1:4.5.3-9.fc10 @updates
qwtplot3d-qt4-devel.x86_64 0.2.7-6.fc9 @fedora
PackageKit-qt-devel.i386 0.3.16-1.fc10 updates
PackageKit-qt-devel.x86_64 0.3.16-1.fc10 updates
PyQt-devel.i386 3.18.1-5.fc10 updates
PyQt-devel.x86_64 3.18.1-5.fc10 updates
PyQt4-devel.i386 4.6.2-3.fc10 updates
PyQt4-devel.x86_64 4.6.2-3.fc10 updates
QtRuby-devel.i386 4.3.3-4.fc10 updates
QtRuby-devel.x86_64 4.3.3-4.fc10 updates
SoQt-devel.i386 1.4.1-9.fc9 fedora
SoQt-devel.x86_64 1.4.1-9.fc9 fedora
avahi-qt3-devel.i386 0.6.22-12.fc10 updates
avahi-qt3-devel.x86_64 0.6.22-12.fc10 updates
avahi-qt4-devel.i386 0.6.22-12.fc10 updates
avahi-qt4-devel.x86_64 0.6.22-12.fc10 updates
dbus-qt-devel.i386 0.70-4.fc9 fedora
dbus-qt-devel.x86_64 0.70-4.fc9 fedora
dbus-qt3-devel.i386 0.9-1.fc10 fedora
dbus-qt3-devel.x86_64 0.9-1.fc10 fedora
libprojectM-qt-devel.i386 1.2.0-3.fc10 updates
libprojectM-qt-devel.x86_64 1.2.0-3.fc10 updates
php-qt-devel.i386 4.3.3-4.fc10 updates
php-qt-devel.x86_64 4.3.3-4.fc10 updates
polkit-qt-devel.i386 0.9.2-1.fc10 updates
polkit-qt-devel.x86_64 0.9.2-1.fc10 updates
poppler-qt-devel.i386 0.8.7-7.fc10 updates
poppler-qt-devel.x86_64 0.8.7-7.fc10 updates
poppler-qt4-devel.i386 0.8.7-7.fc10 updates
poppler-qt4-devel.x86_64 0.8.7-7.fc10 updates
qt-devel.i386 1:4.5.3-9.fc10 updates
qt-qsa-devel.i386 1.1.5-5.fc9 fedora
qt-qsa-devel.x86_64 1.1.5-5.fc9 fedora
qt3-devel.i386 3.3.8b-17.fc10 fedora
qt3-devel.x86_64 3.3.8b-17.fc10 fedora
qwtplot3d-qt4-devel.i386 0.2.7-6.fc9 fedora
zbar-qt-devel.i386 0.8-5.fc10 updates
zbar-qt-devel.x86_64 0.8-5.fc10 updates
Fedora 14 I recently went to install some software using the source files.When I ran the command
Code:
./configure
I got a message saying that
Code:
package gthread-2.0 not found
After searching the internet some one had the same problem. I needed to install a package called
Code:
glib2-devel
However, rather that searching the internet.
How to install gufw? I could not find it when i clicked "install gufw" the message came as package not found.
View 2 Replies View RelatedFedora 14 I recently went to install some software using the source files. When I ran the command ./configure I got a message saying that No package gthread-2.0 not found After searching the internet some one had the same problem. I needed to install a package called glib2-devel However, rather that searching the internet. Is there any yum command that can give me that information?
View 2 Replies View RelatedToday I was using Gchempaint (part of Gnome Chemistry Tools) and found that the F12 version fails miserably to correctly export H to xyz. So I decided to install the latest version I found (0.11). There are, however, some problems I must sort out during compilation.
Apparently it does not see my 'cairo' installation and so I get the following error message:
Code:
checking for cairo... configure: error: Package requirements (cairo >= 1.6.0) were not met: No package 'cairo' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix.Alternatively, you may set the environment variables cairo_CFLAGS and cairo_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.
I have just started using the zsh shell to see what its like and so far I like it. However one anoyance is that if I type: Code: sudo apt-get install plymouth-* I get package not found. If I do the same in a bash shell I get the option to install the the packages matching the wildcard.
View 1 Replies View RelatedI am trying to install the build-essential package on my new Jaunty install, but I seem to get 404 Not Found for all the repositories. I have tried main repositories, US ones and the ones recommended in Software Sources as being the best choice, but I get the same response. I can't install any packages because of this. Could someone help me find the repositories for this distro?
View 9 Replies View RelatedI'm having some problems getting the GUI installed in my Server 10.04 installation.
I've installed the Ubuntu server 10.04 32bit with a VMWare player on a Windows XP Pro host. Everything seems to have gone ok but at the end of the install it said that VMWare items are being installed and while that happens I can only use the terminal mode or I could wait for the GUI to load. Well the GUI never loaded so I logged in through the terminal.
I realized immediately that I'm over my head as I'm more familiar with DOS rather than bash or the terminal commands of Ubuntu. So I tried to look up on the internet (from my host machine) on how to start or install the GUI interface for the server. I've found lots of things that show commands like:
sudo apt-get install gnome gdm
or
sudo aptitude install gnome-core
but in all cases I get a message that the package is not found. So I'm wondering how do I find the package so that I can install this?
When I try to add software sources (specifically those for Scratchbox, but I get the same error with everything), I get an error message: "http://http not found". Obviously that is not a valid APT line and I have no idea what it is doing in my software sources. How do I take it out?
View 2 Replies View RelatedAfter the successful installation of debian squeeze 32 bits from the first dvd, I proceeded to try to install the package noip2, but my surprise was not in the repositories that I have, but when used lenny if I had it.Below show my repositories:[URL]I dont know if i need another repository or i am missing one
View 1 Replies View RelatedWhen the automatic update begins, fails displaying the message:
A package dependency could not be found.
More information is available in the detailed report.
Details >>
cron-4.2-9.17.1.i586 requires cronie = 1.4.6-, but this requirement cannot be provided
I went to software download, I downloaded and installed crownie 1.4.6, but still the same thing
I am trying to install the gtk+ package so that i can install grapher which require gtk+-2.0
When I ./configure gtk+ I get this (lots of output before what I pasted):
configure: error: Package requirements (glib-2.0 >= 2.25.10 atk >= 1.29.2 pango >= 1.20 cairo >= 1.6 gdk-pixbuf-2.0 >= 2.21.0) were not met:
No package 'gdk-pixbuf-2.0' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix.
Alternatively, you may set the environment variables BASE_DEPENDENCIES_CFLAGS
and BASE_DEPENDENCIES_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.
How/where can I find this package. I tried the usual apt-get to no avail.
I'm trying to compile mesa from git sources, and I get this error:
Code:
checking for LIBDRM_RADEON... no
checking expat.h usability... yes
checking expat.h presence... yes
checking for expat.h... yes
checking for XML_ParserCreate in -lexpat... yes
checking for INTEL... no
configure: error: Package requirements (libdrm_intel >= 2.4.21) were not met:
No package 'libdrm_intel' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables INTEL_CFLAGS
and INTEL_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details I have an nvidia card, and had only built the nouveau drivers in libdrm-git. Now it seems mesa has an added requirement for the intel drivers. Also, mesa-git git ignores many compile options that I pass to it.
I'm trying to install lsyncd 2.0 and I am having troubles... Apparently when I do a
Code:
./configure
I get this error
Code:
checking for LUA... no
checking for LUA... no
checking for LUA... no
checking for LUA... configure: error: Package requirements (lua >= 5.1.3) were not met:
No package 'lua' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables LUA_CFLAGS
and LUA_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.I know for a fact I have LUA installed.
Code:
alex@Onyx:~/Downloads/lsyncd-2.0.0$ lua -v
Lua 5.1.4 Copyright (C) 1994-2008 Lua.org, PUC-Rio
I even added the location of the LUA binary to the PKG_CONFIG_PATH environment variable but it's still throwing me this error.
Code:
alex@Onyx:~/Downloads/lsyncd-2.0.0$ $PKG_CONFIG_PATH
bash: :/usr/bin/lua: No such file or directory
EDIT: For some reason, when I built and installed LUA, the "lua.pc" file was not copied over. So I copied the "lua.pc" over to my /usr/lib/pkgconfig/ folder and the ran the ./configure again. This time it worked.
I installed ubuntu server and got it set up, and im trying to install shorewall as a firewall, but whenever i do sudo apt-get install shorewall i get a package not found error.
View 5 Replies View RelatedI would like to install svn, but I am unable to install. sudo apt-get update gives me :
Ign file: eeepc Release.gpg
Ign file:/home/user/packages/ eeepc/main Translation-en
Ign file:/home/user/packages/ eeepc/main Translation-en_US
Ign file: eeepc Release
Ign file: eeepc/main amd64 Packages
Err file: eeepc/main amd64 Packages
File not found
W: Failed to fetch file:/home/user/packages/dists/eeepc/main/binary-amd64/Packages.gz
File not found
E: Some index files failed to download, they have been ignored, or old ones used instead.
sudo apt-get install apache2 gives me :
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package apache2
I'm trying to install ndiswrapper in Fedora 10, but the package is not found:
[Code]...
i ve been trying to compile rtorrent from source and while configuring i run to this: Code: checking for OPENSSL. configure: error: Package requirements (openssl) were not met: No package 'openssl' found Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables OPENSSL_CFLAGS and OPENSSL_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. i tried to install openssl and than i came up to this:
[Code]....
When I try to rpm --resign a package I get file not found error. Its not misstyping its not doing any gpg stuff and it does not ask for passphrase.I then rpmbuild -ba --sign X.specIt makes all the files and dies right where it signs the filesWhy i know its the .rpmmacros it never asks for a passphrase!If I build without --sign it builds 100% and exits normally.
.rpmmacros
%_signature gpg
%_gpg_name myname <myemail>
[code]....
I want to compile program. "./configure" giving :
Code:
[kuba@Kuba-fedora uget-1.8.0]$ ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executable .....
Configure: error: Package requirements (libnotify) were not met:
No package 'libnotify' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables LIBNOTIFY_CFLAGS
and LIBNOTIFY_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. But I have the newest version of libnotify.
I am facing problems when trying to install gtk+, I have downloaded all the required libraries, but the following output?
checking for BASE_DEPENDENCIES... configure: error: Package requirements (glib-2.0 >= 2.21.3 atk >= 1.13.0 pango >= 1.20 cairo >= 1.6) were not met:
Requested 'glib-2.0 >= 2.21.3' but version of GLib is 2.12.3
No package 'atk' found
No package 'pango' found
No package 'cairo' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. you may set the environment variables BASE_DEPENDENCIES_CFLAGS and BASE_DEPENDENCIES_LIBS to avoid the need to call pkg-config.See the pkg-config man page for more details.
Probably a stupid question. I want to install flashplayer- found the package on the adobe website- chosen the version (9.04+) and I then get the question 'Choose an application' - to open it with. What do I do now? This prompt simply takes me to file browser. Or is there an easier way to do it?
View 5 Replies View RelatedI have dowmloaded the latest version of Gnome Nanny, but have run into an instal problem at the first hurdle:
I have extracte the folder to Documents: Cd/ to the folder and run the ./configure command and get this message: No package 'pygtk-2.0' found
I have checked the install files and edited the lines which contain the above to now read pygtk -2.0 >=2.8 as 2.8 is the version of python I have installed. In package manager it only goes back to v2.2.
How I can get around this error?
Running Ubuntu 9.1 karmic Koala.
I've been trying to install the gmagick extension for days now without success. I always end up with the same error message:
checking GraphicsMagick configuration program... configure: error: not found. Please provide a path to GraphicsMagick-config program.
ERROR: '/tmp/pear/temp/gmagick/configure --with-gmagick' failed
It's no wonder why I get this message as the location simply does not exists, its being unpacked to 'gmagick-1.0.3b2' and not 'gmagick'. I've tried to copy/paste the configuration file (config.m4?) to my manually created 'gmagick' directory within the temp folder but that didn't solve anything.
Command when installing:
Code:
pecl install gmagick-1.0.3b2
I'm running Fedora 12.