I am trying to build chromium but I see this error. There are so many references to this everywhere.mohan@branes:~/Downloads/home/chrome-svn/tarball/chromium/src/build$ ../hammer -C build chromeCould not change directory to ./buildscons: *** No SConstruct file found.File "/home/mohan/Downloads/home/chrome-svn/tarball/chromium/src/third_party/scons/scons-local/SCons/Script/Main.py", line 824, in _main
View 3 RepliesI want to test my new lcd display. I could just find one programm for this on Linux: lcdtest.
But there are no binaries, so I tried to compile it with scons, as the README tells me.
[URL]
What I did:
Code:
cd /tmp
wget ***.tar.gz
tar xvfz lcd**
cd lcd**
[Code].....
I have a large existing codebase that all compiles under Ubuntu 8.04 with g++ using Scons. I've been given the task of getting it to compile for Arm9 running uclinux. I have a arm-elf-g++ compiler that I need to use instead of the gcc version. I ended up borking my /usr/lib/scons/SCons/Tool/g++.py file to use arm-elf-g++ instead of g++, but I know that this is not correct, as I have to go edit that file every time I change compilers.
These are the 2 lines I switch out:
Code:
compilers = ['arm-elf-g++']
#compilers = ['g++']
I simply can not find anywhere in the scons documentation that indicates how to tell it to use a different compiler. It seems that it would go under "Environment" but beyond that I'm lost. The CPPPATH variable seems like it only tells scons where to find #include files. I suppose I could rename arm-elf-g++ to g++ and just set my path to find that one first, but that seems like a bit of a hack as well. It would also break other things on my machine.
I'm a long term danger from the deep fan, basically it's one of the two games i enjoy playing. So I've compiled dangerdeep-0.4.0_pre3327 using scons install but after I'm trying to run it I get this
Code:
Stack trace: (5 frames)
0x427e66 in at faulthandler.h:129
0x4232c6 in at mymain.cpp:57
0x4233ac in at list.tcc:68
0x7fd450a03c4d in __libc_start_main at ??:0
0x40ab59 in at ??:0
In /usr/share there's no dangerdeep folder though if I run the command locate dangerdeep it finds an /usr/share/dangerdeep folder, and that's pretty strange. So anyway I really don't know where should I put the data files. There is a linux build inside dangerdeep-0.4.0_pre3327, and I've tried to copy the data files there but without any luck. Is this happening because I have a 64bit distribution, and it just wasn't made for it?
Ive installed about 50+ boxes with ubuntu/mint/fedora/etc but f15 is giving me a real headache...
I tried a fresh install over f14 with this drive (sdb, sda is my backup disk)
Installed obviously in part7
After rebooting (successful copied live image on hdd)
Code:
After another couple of installs (with lvm & w/o lvm) & even disconnecting the second harddrive -> same issue
Typing 'ls' in the rescue grub prompt returns
Code:
Cant 'ls /' into a single them - unknown filesystem (grub is installed in mbr of sdb) 'linux rescue' (wanted to try manual grub installation) command didnt work either.
Now again on fedora 14, same installation procedure, works fine. (and i wont bother doing a full distro upgrade from f14)
Iv been using ubuntu on my laptop for just over a year now and thought it about time my desktop got the same. I cant get rid of the vista section of the disk because of things i have on there so a friend gave me a spare 80gb hard drive to have a play with it and go from there. So first of all installed unbuntu 10.10 on the hard drive alls fine i can boot into both vista and ubuntu, i then want to install backtrack 4, so i booted the backtrack disc and off we went, i split the 80gb hard drive in two and installed backtrack to one section, now i cant boot to anything other than backtrack. I got an option for ubuntu although this does look different now (showing up as 'ubuntu, with linux 2.6.35-22-generic-pae') when i go to this option i get the message "error 15:file not found" I also have the option for other operating system, i get this message when i choose this option "error 11: Unrecognized device string"
View 1 Replies View Relatedi am a ubuntu user for about a year now. i ok with most things. but ive noticed the only things i can use are ones that are supplied for me. so i been trying to figure out how to install new programs not just from synaptic and the ubuntu add/remove. my issue is i have ubuntu 11.04 and i cant get my extracted tar.gz file to be recognized in terminal.
i first put cd home/nicholas/desktop/ndiswrapper-1.56 then nothin it just says no file or directory found. now i thought this was supposed to be a basic comand. am i missing something? is there a new way to write it now that were using 11.04 and not 10.10?
I made a bootable USB flash drive for ubuntu 11.04 32bit. I went to the setup and setup the booting option to USB drive. Now I am trying to boot from USB drive it give an error message:
SYSLINUX 4.04 EDD 2011-04-18 Copyright (C) 1994-2011 H. Peter Anvin et al
ERROR: No configuration file found
No DEFAULT or UI counfiguration directive found!
boot: _
When I attempt to boot into Ubuntu 9.10, I get the error: "Error 15: File not found" I know the reason for this - I deleted it - Doh. A latest upgrade told me I didn't have enough room in the boot partition to install the latest files, so I thought it would be a marvellous idea to remove the old stuff, to give it some room. I obviously deleted something that I needed by mistake. I was using synaptic to do the remove & thought I would be safe. A good learning experience.
In grub menu I have options: Kernel: 2.6.31-15 - generic and also its recovery option, both of which get the same error. (It's a dual boot with XP as the original os). Ideally I'd just like to get the latest working kernel and put it somewhere appropriate, rather than do a full install. Is this possible and if so how? I have a separate boot partition (in dev/sda5), swap (sda7) and Linux (sda6).
[Code]...
Just before the computer boots into the grub menu, I noticed a message on the prompt saying that a file was not found. I had reinstalled Ubuntu 10.04 prior to this. Maybe the grub was not configured properly but I don't know how to fix or find the missing file. I also noticed that I don't have /boot/grub/grub.cfg.
View 3 Replies View RelatedMy problem now is: After booting my laptop, Ubuntu doesn't load and i'm stuck in a GRUB command prompt and not sure what to do. If i type "boot" I get "error: no loaded kernel"Here is how I got there:1. I ran 9.1 healthily until I was prompted to do an upgrade. I ran the upgrade but some packages weren't authenticated so I ran a partial upgrade. 2. I reboot but I'm faced with "Error 15: File not found". After some research and going through the forums, I thought I found the solution by following these instructions to copy the GRUB files from the Live CD (https://help.ubuntu.com/community/Gr...0from%20LiveCD)3. Once I completed this, I'm now stuck at a grub> prompt when rebooting (the error 15 has disappeared). (the screen header informs me i'm dealing with "GNU GRUB version 1.98-1ubuntu5"Any thoughts on what I might have done wrong? From my reading today, I might have installed GRUB2 (even though Grub legacy would have been appropriate?). What is the best way out?
View 9 Replies View RelatedHave a Dell Inspiron 4100 laptop. 1GB RAM and 1 Ghz processor. Has a working install of Oracle Enterprise Linux 5.4 OEL uses Grub version 0.97 My OEL install works well and I do not want to make any changes to it such as upogarding GRUB to a later version etc.
I have installed Xubuntu mini and this completed without a problem.
I have a single hard drive.
I went into OEL and mounted the Xubuntu root drive so I could see the /boot/grub/menu.lst file.
I copied the entries for the main xbuntu kernel etc and pasted them into my OEL grub.conf.
title Ubuntu 10.10, kernel 2.6.35-22-generic
uuid d6ed555c-54a3-4639-af25-3582c60624ad
kernel /boot/vmlinuz-2.6.35-22-generic root=UUID=d6ed555c-54a3-4639-af25-3582c60624ad ro quiet splash
[Code]....
I am doing this so someone else can borrow this laptop for internet use for a few weeks and OEL is not very user friendly and also want to protect my install.
I am reading spc456's thread with the same subject line and trying to work through the thread with suggestions by drs305.
My situation is very similar. It started with a sudden Windows boot problem (still my primary OS):
Quote:
This was only if I selected Windows from the boot menu. I thought I could cure it with the Windows-7 Repair Disk from neosmart.net. This appears to have wiped my Boot partition completely and now I can't boot anything. (I'm using the Ubuntu 10.10 live as I type this.)
I downloaded boot_info_script055.sh and here are the RESULTS but I don't know what needle to look for in that haystack.
Code:
Boot Info Summary:
Well, I see why the Windows boot didn't show up. Looks like 30-OS_prober was failing to find the Windows boot record, which makes sense if the whole blessed (ahem) boot partition has been hosed.
I tried to follow the grub-install instructions:
Code:
But since grub2 is obviously not going to find the Windows boot record, I will continue with drs305's.
Code:
No, I have not mounted /dev. Where would I do that? Against which FS?
In any case, I am now printing the article "How to restore the Ubuntu/XP/Vista/7 bootloader" to see if I can get that going.
To my dismay, I discovered that the disk supplied with my Dell machine is NOT a Windows Installation disk, so no straightforward "fixmbr" command will be possible at this time.
I'll let y'all know how I have fared with this. I am sceptical because it's not merely the master boot record that has gotten corrupted but the whole blessed (have I used that adjective already?) boot partition.
When trying to boot a USB disk image of either 10.10 or 10.04 I get an error saying that no syslinux configuration file could be found and "syslinux error: No DEFAULT or UI configuration directive found.".
The USB disk was created using the Startup Disk Creator on Maverick.
I'm guessing the second error is just caused by the first, since the syslinux.conf definitely isn't there. Thing is, I've used the 10.04 image before and it's worked fine, so I'm starting to think it's the Startup Disk Creator that's at fault.
I'd like to install Ubuntu 10.10 in my laptop. So, I downloaded the iso file and burned into CD. I'd like to install into D drive since I use Windows Vista in C drive.
Below is the specification of my laptop.
Mobile AMD processor 2 G HZ, 1G RAM 32-bit Windows Vista Home basic
Harddisk C : 46 G (18giga free), D : 10 G (10giga free) How can I make partition and where should I start with, either Beginning or End of existing partition? SWAP? I watched a few videos but stlll can't grasp clearly how to do. I tried to boot w/ Live CD. But I didn't see the 4 different options: Try out without installing, Memory test, Ubuntu Disk test, Install Ubuntu, and Booting w/ harddisk. I had only 2 options; Try out w/o installing, Installing. Why is it so?
In addition, while booting w/ Live CD, I saw a message as following:
Error: b43.../firmware file not found.. something like this.. it was too fast to catch! However, I went on and show its desktop screen. May I not be able to install in my laptop? Does my laptop have any faulty disk or memory? I wonder. Finally, I use Wireless connection in the library so when I boot with Live CD, then internet is disconnected. Should I need to be connected before installing?
I am trying to install kernel 2.6.39.1 on ubuntu 11.04I am fllowing this link But may this link is little oldIt mentions a file /etc/lilo.conf to edit but this file is unavailable.where I can find this file r if the page which I mentioned is old then can anyone give me the link which guides me correctly abt how to install kernel 2.6.39.1 in ubuntu 11.04?
View 9 Replies View RelatedI've had my Ubuntu crash and had to reload it. I;ve reloaded 9.1 and am now getting the error
GRUB loading.
error: file not found
grub rescue>
I have tried a number of solution attempts I've found on the internet with no success.
I have Windows 7 also loaded however I'm not getting a Grub menu only the error above. I seem to have a number of Linux partitions I believe my correct one is on sda7. I had at one stage tried to have a boot partition on sda4.
I have attempted to download and burn the fedora 13 i386 installation DVD twice, however, both DVDs that I burned failed during installation. I verified the .iso before burn and the dvd before installation and in both cases they were fine. But during installation, I received error messages that some random .rpm file could not be found (for each attempt it was different). All other configuration went fine, this only happened after the final package selection and when the actual installation starts.
EDIT: I am burning the DVD on my mac book pro using disk utility but performing the installation on a Toshiba Satellite.
Have searched around the web and here but can't find what package to load to solve the problem. Running 9.10
View 4 Replies View Relatedi have a dual boot system set up right now through wubi. the installation went fine. but then i tried to upgrade ubuntu from 10.04.2 to 10.10. the update went fine, no errors. but afterwards when i restarted my computer and selected ubuntu, it said "error: file not found" it didn't even get to grub. this has happened numerous of times trying to upgrade in the past.
p.s: i have vista installed as the other side of the dual boot.
If i compile my.tex file using the command:latex my.tex I am getting this error:! LaTeX Error: File `pause.sty' not found.Type X to quit or <RETURN> to proceed,or enter new name. (Default extension: sty)
View 1 Replies View Relatedi just installed ubuntu and i wanna put wine on so i can install my itunes and adapters an so on. but when i try to install through terminal it always reads that theres no file found or cant complete installation. and theres no net hooked up to it cuz the wireless adapter wont work.
View 3 Replies View RelatedI have a Wubi 10.04 installation and I just did an upgrade and then I rebooted and then I got a message which just said 'error: file not found'. Then it doesn't do anything after that. I get no grub prompt or anything. I'm a newbie to Ubuntu so I'm not sure what to do.Is there a way I can repair the installation from windows maybe or what can I do because I can't even enter the command prompt.
View 2 Replies View RelatedDecided I'd like to take a look at OpenSUSE and installed onto my desktop. Already successfully dual booting Ubuntu 10.10 and Windows XP (which I keep purely for iTunes). When I start the PC the Ubuntu grub menu showing Ubuntu and Windows options has been replaced by a Suse-branded screen showing something that looks (to my untrained eye) like a grub menu. Ubuntu and Suse are listed. If I select Ubuntu I am shown a dos screen with "Error 15: file not found". I am then taken to the old Ubuntu grub screen but trying to boot Ubuntu from that menu returns the same error. I know all the data is still there - I can mount the drive in Suse and view all my documents.
I have searched the forums and tried to follow some of the instructions given in response to similar threads but I'm afraid I didn't get very far. Please assume that I have NO PRIOR KNOWLEDGE of Linux! I really know nothing about it and am only just getting to grips with basic terminal commands. Goodness knows why I thought OpenSUSE would be a good idea... I found instructions for running Boot Info Script and these are the results:
[Code].....
I want to install ubuntu 10.10 alongside XP but all the CD's don't start (the CD's are The linux format magazine DVD and the 10.10 CD). When I install ubuntu via Wubi, if I ubgrade from 10.4 to 10.10 I can't star up Ubuntu and it gives me this eror mesage "eror: file not found".
View 9 Replies View RelatedI am getting a message at my first re-boot after install of "Error 15: File Not Found", and that's as far as it goes. I just installed Fedora 11 on a Drive that I had recently ran Ubuntu 9.04. I did re-partition and format the drive. I am also running Win XP Pro on another drive, and can boot from either. The computer is older, but all the hardware seemed to work fine with Ubuntu and altough I had to format the install drive a couple times the installation seemed to go ok.
View 4 Replies View RelatedAfter preupgrading without problems, I did not reboot the computer inmediatly. I was surprised that, although preupgrade had finished, the terminal window was yet active and I closed it. On reboot, in the Grub window, one of the options is "Actualizar a (upgrade to) Fedora 14". If I select it I get: "Booting 'Actualizar a Fedora 14 (Laughlin)'
kernel /upgrade/vmlinuz preupgrade repo=hd::/var/cache/yum/preupgrade ks=hd:UUID=02f7302b-aa56-4c33-b533- fa1549aa0860:/upgrade/ks.cfg stage2=hd:UUID=02f7302b-aa56-4c33-b533-fa1549aa0860:/upgrade/install.img initrd /upgrade/initrd.img
Error 15: File not found
Press any key to continue....."
and pressing a key it returns to the Grub window. The /upgrade directory doesn't exist, but it does the /boot/upgrade where the vmlinuz is. uninstall and reinstall the preupgrade, rebooting inmediatly, but I don't know how to uninstall and if this is the solution. How can I uninstall the preupgrade?
I have been trying now for 3 days to install Fedora 15 on my computer. I have Windows 7 installed and have created a free partition for this install. When I am installing I get to the repository selection part and I get only 3 options (Fedora 15, Fedora 15 Testing, Fedora 15 Updates), by default the Fedora 15 and Fedora 15 Updates are selected. There is no option for DVD Repository and if I click add repository and select DVD it says no repository found. Furthermore, if I proceed with the 2 default repositories checked off it takes about 8 hours to download everything online and then towards the end it says it couldn't retrieve a file and exit installation. How to use the DVD to get all the packages so that my install doesn't keep taking 8 hours to fail?
This is the 64bit version I am trying to install, system specs:
Intel Core i5-2500K CPU @ 3.30GHz
16.0 GB Ram
ATI Radeon HD 5800 Series
1 TB Harddrive
The original DVD I got from the direct download. I also downloaded via torrent to see if that worked and got the same results.
I downloaded linphone 3.30 using mozila and tried installing. while giving the command ./configure it was successful and next giving the command make gives me a error message make file is not found. but makefile.am and makefile.in is already available in the current working directory.
I have given the link of the pastebin for ./configure command and make command..
I am running a fairly new Debain Jessie stable installation with Xfce desktop. I need to use Xfce4 becuas the standard Gnome 3 does ot work when logging in with xrdp which I use becuase the actual box is headless.
I have an issue when starting synaptic. When I start it from the menu entry it just does not start. When I start from the terminal with
Code: Select allgksudo synaptic
I get an error box "Unable to copy the user's Xauthorization file" At the same time I can see in the terminal window a message
"Error copying '/home/userxxx/.Xauthority' to /'tmp/libgksu-SwcIe0': File or Directory not found".
I assume it is related to that I use a rdp session to connect, but I am otherwise clueless.
Code: Select alluserxxx@server2>xauth
xauth: file /home/userxxx/.Xauthority does not exist