After updating the kernel in Wubi installs, GRUB gets messed up. This has caused me to hold off on the HUGE list of updates in my update manager (I have never updated since I first installed 10.04, and this was just over a week ago). Are these updates important enough to potentially risk something bad happening? What is the risk of updating? Is this an issue with all Wubi installs?
View 6 RepliesI updated wubi kernel(ubuntu 10.04) After restart, i selected ubuntu then my system reboots. Then i select ubuntu then my system reboots. I dont know what to do now,
View 4 Replies View Relatedi have a Winxp and Ubuntu 10.10 system(wubi-install, update from 10.04 to 10.10).I have fixed the update problem 10.04 to 10.10 with the modified wubildr.Today there was a kernel update from 2.6.32 to 2.6.35 (???) and after the restart i can boot only xp.If i choose Ubuntu, there is a black screen and the computer restart. the ubuntudisksootgrub folder is empty!?!Here is my log:
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
[code].....
I have purchased a new Aser I5 laptop....Is Wubi the way to go to install Ubuntu 10.10 into this window machine. I hear a lot of people don't like or use Wubi. If I use Wubi can I pick the size on mt 705 gig hard drive to allow for say 100gig or 200 gig. etc.for Ubuntu?
View 4 Replies View RelatedI was just getting ready to install ubuntu 10.10 64x with wubi but I read that it has some serious issues. Am I safe to install ubuntu 10.10 with wubi? Have the issues been fixed by now?
View 2 Replies View RelatedSo I have thunderbird and it works great but I wanna check out the lighting add on and need a new addition. I have it set so it should update automatically but alas this didn't happen. I have downloaded the newest version to my hard disk and am wondering if I can just update it from that file? I don't want to try installing it for fear of loosing everything I already have.
View 2 Replies View RelatedAfter to trying make a Multiboot live USB using MultibootSystem, my Ubuntu (10.10 install in Windows 7) is not booting anymore. I have moved the folder c: ubuntu (to saved my data) uninstall Ubuntu and reinstall it still nothing. I have the grub but when I select Ubuntu I have the following error message:
error : out of disk
error : you need to load the kernel first
Press any key to continue...
When I press anykey () I no have the message
error : unknown filesystem
error : you need to load the kernel first
Press any key to continue...
I had a bad experience with 9.04 - I installed some recommended system updates, and the updated GRUB killed my installation (which is WUBI), not letting me boot.
I've now installed 10.04, and some updates have come through, one of which is GRUB. So I'm now looking at the "Configuring grub-pc" dialogue box that's popped up, and there's an option to "Continue without installing GRUB?".
What are the risks here? Is my 10.04 WUBI system going to die if I upgrade GRUB again? Or is it going to die if I don't upgrade GRUB?
I've been running Ubuntu 10.04 AMD64 on our home theater PC through a wubi installation. Yesterday the system update installed a new kernel and today there is a problem booting the computer so I'm reluctantly using Windoze to type this. there isn't much information: the computer has always booted fine before the kernel update. When I select Ubuntu in the boot menu the screen goes black and the computer restarts. No error messages, no GRUB menu, just a blank screen before restart.
Computer: Dell Hybrid 140G, Intel Core 2 Duo T5800, 4GB RAM
I am an experienced Linux admin and have been using SuSE for many years. My development machine has had every version of SuSE since '02 and although it is a little old, is in good working order. (AMD
2400, 2 gig RAM, 160 Gig IDE disks - SuSE on disk 2) (OpenSuSE 11.1 with the latest kernel works perfectly. This install is on a spare HDD prior to doing a full install on my usual HDD.)
When I try to install SuSE 11.2 from DVD, the load kernel operation hangs at 97% (using both normal and safe kernel), however, I can install from live CD without any problem. I have tried the same DVD on a few "older" machines and had the same problem. I initially thought it was the actual DVD but re-burning has the same problem. I have also tried another DVD writer - same problem.
9.04 this morning updated my kernel to I believe it is 2.6.28.18 and upon the reboot I had no desktop. It booted wanting to go into low graphics.
So I drop to shell and stop the gdm and try to run the latest nvidia run file I have and it hangs saying I have a x server running.
Otherwise I am needing assistance with getting my desktop back! I can boot into an older kernel and if need be I would like to roll back that latest update this morning, but once again I am forgetting the command line for that.
(after i update packages, it says error, and here's whats in the details tab)
Preconfiguring packages ...
(Reading database ... 197969 files and directories currently installed.)
Preparing to replace flashplugin-installer 10.3.181.34ubuntu0.11.04.1 (using .../flashplugin-installer_10.3.181.34ubuntu0.11.04.1_i386.deb) ...
code....
How to fix This? i haven't messed with Ubuntu much...Why am i getting an error about a kernel update?
After clicking on wubi.exe nothing happens. Wubi does not start at all.Windows XP, SP3.
View 9 Replies View Relatedi tried to update on my computer when i first got it and my mouse stoped working then when my friend tried to update his it got incredibly jacked up and skiped windows boot loader and went straight to grub recovery we had to reformat the hardrive that ubuntu was on to even get it to boot to windows please help or should i just not update while using wubi? i plan on reformating in a little bit and just running windows in a virtual box for the things on windows i still use i thing everything can be happy with 3 cores and 4 gigs of ram on each side of the box right? and should i know anything about running my games through a box like will it nerf my grafix cards ability?
View 1 Replies View RelatedIt seems that updating the Kernel breaks my installation. I've tried it twice, and both times it disabled my gui desktop. I'm posting this with links2 in my terminal. The terminal works perfectly.
This is really annoying, as I can't even use my computer. What do you think is the problem?
Running Karmic on my laptop, I get very occasional kernel panics (suspect it has something to do with the Broadcom WiFi because it only seems to happen with heavy network traffic or HDD access), but just my lucky, this time it Panic'd on me during my recent update -> linux-kernel 2.6.31-20. My system still 'works', but I get the following when doing any other updates, now:
Code:
sudo dpkg --configure -a
[sudo] password for tango:
Setting up linux-image-2.6.31-20-generic (2.6.31-20.57) ...
dpkg (subprocess): unable to execute installed post-installation script: Exec format error
dpkg: error processing linux-image-2.6.31-20-generic (--configure):
subprocess installed post-installation script returned error exit status 2
dpkg: dependency problems prevent configuration of linux-image-generic:
linux-image-generic depends on linux-image-2.6.31-20-generic; however:
Package linux-image-2.6.31-20-generic is not configured yet.
dpkg: error processing linux-image-generic (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of linux-generic:
linux-generic depends on linux-image-generic (= 2.6.31.20.33); however:
Package linux-image-generic is not configured yet.
dpkg: error processing linux-generic (--configure):
dependency problems - leaving unconfigured
Errors were encountered while processing:
linux-image-2.6.31-20-generic
linux-image-generic
linux-generic
Now I cannot seem to get rid of that, and of course, I am stuck in the prior version. Granted everything 'works' - but it bothers me. What's the best way to go about tracking down and hashing out a problem like this?
I have just run an upgrade and noticed Kernel update 2.6.32-22 for lucid. Anything new in that? Anyone have any details?
View 9 Replies View RelatedI've a self compiled kernel. How I can hold this version and deactivate the kernel-updates?
View 4 Replies View RelatedWhen trying to clean up old kernels I accidentally deleted the current kernel (2.6.35-24). I then had problems when I reinstalled and found that I could only boot into command line mode. I was able to fix this problem but have since installed the latest kernel release (2.6.35-25) and now have the same problem as before. Of course, I could do what I did before but I guess this is going to occur whenever I upgrade in future.
View 4 Replies View RelatedUpdate to latest kernel 2.6.38?
Code:
paneas@paneasbox:~$ uname -a
Linux paneasbox 2.6.35-27-generic #48-Ubuntu SMP Tue Feb 22 20:25:46 UTC 2011 x86_64 GNU/Linux
I want to update my kernel to the latest version from kernel.org, which is the mainline 2.6.38-rc8 .
EDIT: I found this guide [URL].. and I will give it a try
After upgrading Maverick (perfect!) to Natty, I was unable to boot into anything. (kernel 2.6.38). However, through much PITA, I was able to boot into an older kernel. (2.6.35). I completely removed 2.6.38, rebooted, reinstalled it and ran update-grub. However, 2.6.38 is no longer available no matter how many times I run update-grub, and the only option left is 2.6.35. In my humble opinion, the Natty upgrade experience is rubbish. (blank screen, total PC hangs, boots into a blank screen with only a blinking cursor, NVIDIA official driver not working, bootable only into older kernels etc.)
View 7 Replies View RelatedI tried to update Linux kernel (2.6.39) but after installation procedure PC won't boot into NEW kernel, I get only BLANK screen, but hopefully older kernel works just fine (2.6.38-9), how to fix it, that I can fluently boot into 2.6.39?
View 4 Replies View RelatedI got the blank screen when trying to install openSUSE 11.3 x64, so I was able to successfully install by choosing: Kernel (F6) > Safe Mode
Now I am trying to build my wireless driver, and I also notice that my touchpad is not scrolling. I had this OS installed in Windows 7 through VirtualBox before doing the clean installation, and I remember the touchpad scrolling.
I am thinking that by choosing Kernel Safe Mode to install openSUSE, that it did not install all the repositories, and it is why I am running into some difficulty.
what I need to do to fix my installation as if I had not installed in Safe Mode.
im dual booting ubuntu and win7 (i installed ubuntu using wubi)yesterday i ran the update manager and i noticed it installed a kernel update.since then, whenever i reboot i get the boot loader menu asking me to choose between win7 and ubuntu, but when i choose ubuntu, instead of the regular menu that asked me which kernel version i wanna use i get a command-prompt-like interface with the title:
View 1 Replies View RelatedI would like to update my Kernel from 2.6.31.14 (from liveCD) to the 2.6.31.17, because of my modem problem (huawei e 169).>UBUNTU 9.10<
I know that I can do it trough synaptic- but the problem is when I restart my pendrive, the kernel want be recognized. I think I have change something in some boot documents- but it looks here everything a little bit different than with HDD install:there is no menu.lst , etc.
Update manager reported some updates including kernel update to version 2.6.31-19.
after update system won't boot. it crashes into bash shell. I've manually loaded kernel version 16 with following command code...
same thing happened when version 17 came up. I definitely NEVER again going to update kernel. What do I need to do now? should I uninstall latest kernel...if that is possible?
Ubuntu 9.10 on my dual boot HP laptop won't shut down completely (my screen goes blank but the laptop doesn't power off just hangs with no screen display showing anything). I never had this problem before. It appeared after the 2.6.31-19 update.
After I push the power/reboot button and then restart the laptop, I am able to shut down.
I'm noticing that maybe twice a month the Update Manager is asking me to upgrade my kernel. Currently it's asking me to move to 2.6.32.24.25. Is this the smart thing to do? Are these primarily securtiy updates to the kernel?
View 1 Replies View RelatedI did the kernel update via Update Manager today. Unfortunately , after this , disaster happened whereby sh.grub> prompt appeared on screen.
I got no idea how to rescue or repair the grub. I installed Ubuntu 9.10 in my E: under Windows 7 partition and labeled as "ubuntu". It has dual boot capability.
I'd like to have my own script be executed automatically after doing a Linux kernel update. Is there somewhere i can link into this process that isn't touched by the update itself? The purpose of this idea is to try automate the installation of sound (alsa 1.0.23-2) and video drivers (nvidia from website) that i typically need to do after every kernel update.
View 3 Replies View Related