I would like to update my Kernel from 2.6.31.14 (from liveCD) to the 2.6.31.17, because of my modem problem (huawei e 169).>UBUNTU 9.10<
I know that I can do it trough synaptic- but the problem is when I restart my pendrive, the kernel want be recognized. I think I have change something in some boot documents- but it looks here everything a little bit different than with HDD install:there is no menu.lst , etc.
Live CD: I dowloaded the ISO, burned it to CD, booted from this CD. It starts to load and I can see the purple background with the loading icons. Everything seems normal. But instead of ending up with the login screen, it ends up with a screen that says 'Please remove all bootup media and hit ENTER' or something like this. So I hit enter and then it shuts off my computer. That's it.
Live Stick: So I tried another option and created a stick with 'usb-creator.exe' that is on the CD. Then I start from that stick, but all I end up is a line of 'Syslinux bla bla copyright 20xx-2011'. That's it. Then it does nothing anymore. The cursor is blinking, but no prompt or whatsoever and keyboard input doesn't do anything.
Now something weird: When I insert Live CD and Live Stick at the same time and then boot my computer, then it boots into Ubuntu. Obviously it loads the first parts from CD and then the rest from stick. Because when I'm then in Ubuntu and try to format the stick, it says it can't do so, because there's system files from that stick in use.
I have a couple of laptops without hard drives lying around; and I'd like to use them with ubuntu studio. Ubuntu studio doesn't have a live image, so I can't use any of the millions of "copy live-cd ISO to usb" instructions I'm finding all over the web. I only want to use them with creox, but I figure I'll need the real-time kernel as well.
View 1 Replies View RelatedHow can I make a usb live cd and save changes to the same usb stick?I have the unetbootin program and plan to install ubuntu on my 4 gig flash drive. What do I need to do to save the changes and preferences and even install a few programs to it. I essentially want it to behave the same way as if I had installed it to my hard drive except with a 4 gig memory limit.
View 5 Replies View Relatedi need to install openSUSE 11.2 from an USB stick. I followed this article SuSE install from USB drive - openSUSE using the openSUSE-11.2-NET-i586.iso. Unfortunately the kernel provided in this image doesn't load on my target as it needs a few extra modules for its chipset.
Thus i copied our custom kernel (which is verified to run on the target) and its initrd to the usb stick and i also created a new entry in the syslinux.config. The kernel loads, but then it can't find the root device.Does anybody know, how i need to configure the initrd to make the USB stick the root device?
9.04 this morning updated my kernel to I believe it is 2.6.28.18 and upon the reboot I had no desktop. It booted wanting to go into low graphics.
So I drop to shell and stop the gdm and try to run the latest nvidia run file I have and it hangs saying I have a x server running.
Otherwise I am needing assistance with getting my desktop back! I can boot into an older kernel and if need be I would like to roll back that latest update this morning, but once again I am forgetting the command line for that.
(after i update packages, it says error, and here's whats in the details tab)
Preconfiguring packages ...
(Reading database ... 197969 files and directories currently installed.)
Preparing to replace flashplugin-installer 10.3.181.34ubuntu0.11.04.1 (using .../flashplugin-installer_10.3.181.34ubuntu0.11.04.1_i386.deb) ...
code....
How to fix This? i haven't messed with Ubuntu much...Why am i getting an error about a kernel update?
I am building a live-cd using live-helper on Karmic (9.10). The process executes fine and I am able to build a live cd of ~200MB in size with minimal and xfce. But things does not work if I try to upgrade the kernel with the one of them from [URL] site. Ubuntu kernel team publishes the kernel for testing and I would like to upgrade the kernel for testing. But when I upgrade the kernel from inside the live-helper's interactive shell, it upgrades fine and iso gets created. While booting, it loads the kernel and errors out with the following message:
Code:
(initramfs) mount: mounting aufs on /root failed: No such device.
aufs mount failed.
I am running initramfs after installing the new kernel (a .deb file) using dpkg.
What else should I need to do for getting this to work?
I am using ubuntu 8.04 and i am trying to make iso image cd with running kernel. i know that there is documentation in ubuntu website in"how to make live cd" but the thing is this is my custom kernel. i have my own configuration. so i want this kernel to be work in live cd.
View 1 Replies View RelatedMy hardware isn't yet well supported on linux, so I'm looking for a live CD with 3.18 (3.19 came with a bad regression that still isn't fixed; and I need it to be a live CD so I can test before installing).
I noticed that the latest weekly build of stretch comes with 4.2. Can I find one with 3.18 somewhere?
I installed F12 to a live USB stick. When I boot up the system it says there are several hundred updates available. I've tried to update packages, but when I reboot the updates that claim to have been made do not appear. The system reverts to its original state after reboot.
So is it possible to do this? Can one have persistent packages? (this does seem to work with ubuntu)
Or is F12 on a live USB stick supposed to be pretty much the same thing as having a live (read-only) CD?
What I'd really like to do is have a small version of F12 on a USB stick that has up to date packages I need while dropping the packages I don't need.
So i was trying to run an application the other day and it required newer graphics drivers, so i reluctantly updated them as i have had endless troubles with them before. Surprise surprise on rebooting the system i was confronted with a black screen.
So i decided to go into recovery mode to try to un-install the drivers and i think that was successful, but i can't be sure since when i reboot the system now even in recovery mode i get a blank screen.
So i am wondering how i can fix the system from booting into a live USB stick as it is the only way i can really gain access to the system. I think to fix it i will either need to some how remove and re-install the working ati drivers or do a system restore, but i have no idea if the latter is possible or not, and I am not too sure on how to install the drivers to a file system from a live distro.
I decided to put a copy of Ubuntu 11.04 on a USB stick. Downloaded the image file and USB installer and built the stick with no problems. I REALLY don't like the new interface, so I went to the login screen tool and changed the login to come up in Classic mode. Trouble is, now when I try to bring the system up I'm presented with a log-in screen that asks for a user name and password. Since I'm using a live image (akin to a live CD) I don't have any user name or password established. Are there defaults that will allow me to log in? Or do I have to recreate the installation and create a user account that will let me log in?
View 9 Replies View Relatedi want to install opensuse 11.3 with LXDE on ASUS EEEPC 1201HA.
Therefor i download this: Derivatives - openSUSE and tied to get this on USB-Stick with Unetbootin.
The EEEPC bootet but obviously the image was not able to boot.
Booting the ISO from CDROM from a external drive it works.
Is it not designed to boot from USB?
Is it possible and how it works to create live usb-hdd squeeze with self compiled kernel?
View 2 Replies View RelatedI've followed the instructions at Live USB stick - openSUSE for creating a bootable USB stick. I have attempted this with both a 32 bit and 64 bit image. Unfortunately my system will not boot up the stick - it just loads my hard disk as normal.
Background info
1. I have checked the iso images against the checksum and they are ok;
2. I have used the same images to create bootable CDs which work fine;
3. My machine IS capable of booting a USB stick - by copying syslinux onto the stick, the machine does see the stick
4. The order of boot in BIOS is stick first. Again, I have proven this works ok using a utility called USB Boot Tester.
I am unsure what to try next. I recall reading on this forum there was a problem booting from USB stick if the computer also had a CD drive. That was in an early version of LiveCD. Could the problem still be extant? I can't find the actual thread unfortunately otherwise I would link to it.
I created a live USB stick following the instructions at [URL] installing openSUSE-11.2-KDE4-LiveCD-x86_64-iso and booting a Motion LE1700. openSUSE works great but any file I create is lost after I reboot. I created the second partition with the script listed the instructions. Is there any anything else to do to make the live system mount the second partition?
View 5 Replies View RelatedI downloaded openSUSE 11.3 to my MacBookPro, whose disk drive has been broken for some time now. I want to install to new msi cr610 laptop that shipped WITHOUT windows. I could order the box with an install disk and printed manual, but if there's any way of creating a bootable USB stick from the download I did to my mac, that would be great.
View 3 Replies View RelatedI installed Kubuntu 8.04.2 Live CD on a USB flash drive using a software program called Unetbootin (from Gentoo), and I can successfully boot into the OS with no problem but I am not able to save any changes such as preferences, because once I reboot, everything I changed or installed is lost. I guess this is because the OS is dumped into RAM and all of my changes were made in RAM instead of the USB flash drive.
My question would be is there a way (keeping my present configuration) I can save any changes to the USB flash drive so that when I reboot, the changes will stick?
I just built a 11.3 live usb stick using kde amd64 image. I can go through a full boot up, but when X start I get a blank srceen(Samsung SyncMaster PX2370) on my desktop. I really do not know where to start.
View 4 Replies View RelatedI've been trying to figure out how to run/install openSUSE from a usb stick for several days. I downloaded the 11.4 .iso from distrowatch & used the following command in Linux Mint to put it on the usb stick.
Code:
sudo dd if=openSUSE-11.4-KDE-LiveCD-x86_64.iso of=/dev/sdc
It gets to the loading screen and get stuck. It has a small bar going across, that never finishes. I've hit escape to try and get some info, but don't know what I'm looking for and it's too much to write down. I did notice there were several I/O errors. I did check the usb for defects and it returned ok, and the md5sum was correct.
I've also tried safe settings which takes me to a blueish/black screen and stays there. No ACPI starts to load and then drops to a shell.
how to get this accomplished? I've installed many Linux OS's and I've never had this much trouble.
ps. I"ve read the "please read" pre installation page on here, and things just don't make a whole lot of sense to me.
Possible Duplicate: Good Linux live distro for USB?
I'm already trying out dsl (50MB) and aptosid (~490MB). Which others should I try?
I've put openSUSE several times in USB flash drives. I've used the old method with dd ... and the new one with dd_rescue ..., shown in SDB:Live USB stick - openSUSE This way a partition is created (sdb1 or sdc1 or ...), with the Linux file system (ID: 83). One of the problems of this system is that all the data of the pendrive is deleted. Another problem is that sometimes openSUSE doesn't load completely and I cannot use it. And another of the problems is that even if I create another partition (for example to make the Live USB persistent and "remember" the configuration of my computer) and I put some of my photos, songs, films there when I plug the pendrive in a computer running Windows XP I cannot access the data. (What about Vista and 7?)
Other Linux distros can be put in pendrives using the FAT file system (for example W95 FAT32 (LBA), ID: c). This way my personal data or files (photos, documents, ...) can be opened from a computer running Windows XP (and the personal data is not erased when putting the Linux in the pendrive). So I would like to know how to create a Live USB drive with personal files that are avaiable for many Operating Systems, including Windows XP. Perhaps the solution is to put openSUSE in a FAT file system, or put it in Linux file system but create another partition with FAT file system (for this openSUSE should avoid the 1st partition, sdX1, that should be for the personal data, so Windows XP can access it).
It seems that updating the Kernel breaks my installation. I've tried it twice, and both times it disabled my gui desktop. I'm posting this with links2 in my terminal. The terminal works perfectly.
This is really annoying, as I can't even use my computer. What do you think is the problem?
Running Karmic on my laptop, I get very occasional kernel panics (suspect it has something to do with the Broadcom WiFi because it only seems to happen with heavy network traffic or HDD access), but just my lucky, this time it Panic'd on me during my recent update -> linux-kernel 2.6.31-20. My system still 'works', but I get the following when doing any other updates, now:
Code:
sudo dpkg --configure -a
[sudo] password for tango:
Setting up linux-image-2.6.31-20-generic (2.6.31-20.57) ...
dpkg (subprocess): unable to execute installed post-installation script: Exec format error
dpkg: error processing linux-image-2.6.31-20-generic (--configure):
subprocess installed post-installation script returned error exit status 2
dpkg: dependency problems prevent configuration of linux-image-generic:
linux-image-generic depends on linux-image-2.6.31-20-generic; however:
Package linux-image-2.6.31-20-generic is not configured yet.
dpkg: error processing linux-image-generic (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of linux-generic:
linux-generic depends on linux-image-generic (= 2.6.31.20.33); however:
Package linux-image-generic is not configured yet.
dpkg: error processing linux-generic (--configure):
dependency problems - leaving unconfigured
Errors were encountered while processing:
linux-image-2.6.31-20-generic
linux-image-generic
linux-generic
Now I cannot seem to get rid of that, and of course, I am stuck in the prior version. Granted everything 'works' - but it bothers me. What's the best way to go about tracking down and hashing out a problem like this?
I have just run an upgrade and noticed Kernel update 2.6.32-22 for lucid. Anything new in that? Anyone have any details?
View 9 Replies View RelatedI've a self compiled kernel. How I can hold this version and deactivate the kernel-updates?
View 4 Replies View RelatedWhen trying to clean up old kernels I accidentally deleted the current kernel (2.6.35-24). I then had problems when I reinstalled and found that I could only boot into command line mode. I was able to fix this problem but have since installed the latest kernel release (2.6.35-25) and now have the same problem as before. Of course, I could do what I did before but I guess this is going to occur whenever I upgrade in future.
View 4 Replies View RelatedUpdate to latest kernel 2.6.38?
Code:
paneas@paneasbox:~$ uname -a
Linux paneasbox 2.6.35-27-generic #48-Ubuntu SMP Tue Feb 22 20:25:46 UTC 2011 x86_64 GNU/Linux
I want to update my kernel to the latest version from kernel.org, which is the mainline 2.6.38-rc8 .
EDIT: I found this guide [URL].. and I will give it a try
After upgrading Maverick (perfect!) to Natty, I was unable to boot into anything. (kernel 2.6.38). However, through much PITA, I was able to boot into an older kernel. (2.6.35). I completely removed 2.6.38, rebooted, reinstalled it and ran update-grub. However, 2.6.38 is no longer available no matter how many times I run update-grub, and the only option left is 2.6.35. In my humble opinion, the Natty upgrade experience is rubbish. (blank screen, total PC hangs, boots into a blank screen with only a blinking cursor, NVIDIA official driver not working, bootable only into older kernels etc.)
View 7 Replies View Related