Ubuntu Installation :: Remove Unr And Grub To Restore System To "like New"?
Apr 20, 2010
I'm having some trouble removing unr from my asus eee pc 1005peb, I installed it about a month ago and sadly to say I need cash so I will be selling the eee pc. I want to restore it to factory settings. I already tried uninstalling unr, by deleting the partition it was on, that didn't work. Once I booted up again it gave me a grub error. So I reinstalled unr and now have a left over swap partition from the original install. I want the system to boot up as it did before the installation of unr. How would I go about doing this?
I have installed Kubuntu on a usb stick. I installed version 9.04 from a disk that came with linux magazine. After installation I can only boot pc if the usb stick is plugged into pc before I turn it on. I then gat a menu with 5 options. The first is Kubuntu and the last is Windows XP. If I try to boot my pc without the usb stick plugged in I get a GRUB error message.
I think this is the GRUB menu which means that it must have amended the Master Boot Record. If I try to boot my pc without the usb stick plugged in I get a GRUB error message. This is generally a minor inconvenience and a great security measure. My worry is that I am notorious for losing usb sticks. If I lose this one I wont be able to boot pc. Is there a way to remove GRUB and restore the MBR?
Basically, I used a USB stick to run ubuntu 9.10 live, then tried to install to an external 500gb HDD connected with a Sharkoon Drivelink USB adaptor. The installation went fine, but I get a GRUB error 21 when booting a lot of the time. I figure this is due to the way in which the drive is connected. I am a complete noob, and I want to just ove GRUB completely and restore my Vista bootloader. Unfortunately, I do not have an installation disk as my laptop didn't come with one, and none of the others I have other PC's are the same version (home premium 32-bit).If you know of a way to fix the GRUB issue/sso I can use the external drive I would love to hear them too, but the main aim of this thread is to help me remove GRUB and restore the windows bootloader. If any more information is needed, just ask and I will provide it.HP Touchsmart TX2-1010Windows Vista Home Premium 32-bitExternal HDD:Seagate Barracuda 7200.11 SATAII (with jumper set for 150mbps)
I am trying to restore my system to Ubuntu 10.10, using a system backup made with REMASTERSYS. When I reboot, I get the message: GRUB error:15 I found many threads discussing this issue, most notably here: [URL]
Is there any way to simply remove grub? Does GRUB reside in a specific partition? Do I have to just delete the partition that has GRUB on it?The way my bootable partitions work is something like this.
1)Installed Vista
2)Installed Ubuntu
3)Thought I removed GRUB
4)Put in new HDD(1) and installed Win7 onto it
5)Put in another new HDD(2) and put another Win7 onto that (but I disconnected every other HDD so that the bootloader would be written onto the new HDD(2). When I have all my HDD's plugged in now, I get a GRUB load error (I think it's 21).
I just made my system unbootable... Here is what i did.. I have two sata HDDs
160 GB (Contained Windows 7) 500 GB
I copied entire 160 gb as an mirrored image to 500GB HDD using Acronis Disk Director. I deleted entire 160 GB HDD.. Removed the 500 GB HDD and kept it seperate.. Installed ClearOS Enterprise 5.2 Worked a little bit... The i wanted to delete ClearOS.. So i connected 500GB HDD and booted again in Acronis Disk director Formated the entire 160GB HDD.. Copied back the entire 160 from 500GB HDD.. Now my sytem refuses to boot... Just 4 letters "GRUB" appears on the screen... I tried booting using XP CD.. It gives a blue screen.. I tried Windows 7 CD.. It says unable to fix due to MBR problem..
I've had to give up trying to install linux. It just won't work on my machine, a Presario 6370us that has been upgraded over the years such that it is not compatible with linux, apparently. (You can read my travails elsewhere on this board; thanks very much to all who tried to help.)
Now, how do I remove the GRUB boot loader from my system? I need the system to boot directly to Windows XP.
I can't start linux in any way, shape, or form, so I need to either edit GRUB inside the GRUB environment itself, or to do so from Windows.
Ideally, I'd like to remove GRUB entirely. Failing that, I'd like to edit the GRUB config file so that only Windows is an option. Failing that, I need to make Windows the default OS.
The latest update installed a new linux header 2.6.35-23. The older version 2.6.35-22 also appears in grub. What would be the sense in keeping them both? And if not required how do I remove the older version from grub? I tried: "sudo update-grub" which changed nothing.
i hav dual boot system with Windows Xp and Ubuntu 9.1 using Wubi i have 5 partitions at one 250gb harddiskwindows is working on C:i have ubuntu on the 5th on G: installed under windowsWhile i am experimenting with startupmanager i selected to show spalshscreen and restarted ubuntuthen i found a problem with grubani have only a terminal to enter grub commands named sh:grub:>how can i restore the grub and boot into ubuntu
After upgrading from 9.10 to 10.4 computer stop working. Booting stops on grub with a massage:
Code: Grub loading. Error: the symbol 'grub_puts_' not found grub rescure> I try to restore grub but after command: Code: insmod /boot/grub/linux.mod I get error: Code: Error: the symbol 'grub_puts_' not found
I had windows XP and Ubuntu installed on my Asus 1000HE and the hard drive is failing so I need to RMA it. They told me to restore it to factory defaults which I just press F9 at boot 3 time and Ghost takes over and reformats, creates 2 partitions and installs XP on one of the and the other is for another OS or just storage if needed.
I did that now I get a grub rescue prompt when I boot my netbook. Is there a way that grub installed itself to my PE partition that's a hidden partition that came with the netbook? I've taken the drive out of the netbook and put it into my desktop and formatted both main partitions but not the restore one. Yet I still get the grub rescue prompt, how can that be?? I can't even boot from flash drive or get to bios it just goes straight to the rescue.I need to send the netbook back but can't unless its restored. Right now I'm on the 9.10 live flash drive I made on my desktop and my only hard drive attached it the netbooks.
I need to use the fixmbr command to fix my windows installation. I'd like to restore grub to its former state after doing so. I have searched how to do this and since my configuration differs slightly, I'd rather get more specific instructions. Right now this is what menu.lst looks like:
are there any sweeper / cleaner apps which can take back my installation as to when it was new. I know home directory could have config files etc..but that doesnt matter, i want all packages and applications reset to how it was when i had a clean install. I am using Natty
I just installed Win7 (I need it for work -.-") and, of couse, it installed its boot loader and I can't boot F13 any longer. The question is, how do I restore GRUB from a F13 live installation media without destroying Win7?
I remeber trying something like that a couple of years before when I had the same issue:
Unfortunatelly, that doesn't work and at the next boot I am stuck with Windows again how to restore grub from a F13 live CD?
I do computer forensics here in Afghanistan and I am trying to keep a clean image of a dual bootable hard drive. Here is what I try to do...
1. Boot into UbuntuLiveCD 2. I run "sudo dd if=/dev/zero of=/dev/sda conv=sync,notrunc bs=64K" to wipe the drive with all zeros. 3. I then install Windows by creating a new partician about 50GB. 4. I then install Linux by creating a partician in ext4 mounting it at '/' in addition I create a swap partician. 5. Next configure everything just the way I want it. I install all the drivers and software I need for my windows partician and build out the remaining part of the disc as a "data drive." 6. Then I use "dd" again to try to image my "clean slate" of a system. Remember I am dual booting. I dd the /dev/sda and gzip it. 7. When I go to restore it, I boot from the live CD again and unzip ig and "dd" it back onto /dev/sda. 8. I run fdisk -l and I get:/dev/sda1 * 1 6375 5120000000 7 HPFS/NTFS/dev/sda2 6376 11724 42965842+ 83 Linux/dev/sda3 11725 12453 ...... 82 Linux swap / Solaris.This means to me that it can "understand the file system" 9. But then when I take out the Live boot CD and try to get my "clean slate" machine back, the system goes into Grub Rescue mode with a grub command line "grub rescue>" 10. I tried using the tutorial on Grub2, but... a. It would not understand the command "linux" b. When I try to do insmod, it says it doesn't recognize the file system.
I had i a dual boot win. 7 and ubuntu 9.10,recently i had some problem in my windows os so i restored the c drive to factory settings since both operating systems where in c drive so when i tried to boot grub was showing problem.the information displayed was loading grub, the file does not exist rescue grub> so what should i do to restore grub so that i can boot again into windows 7 and ubuntu without loosing my data.
A few days ago I installed my first Linux product, which is Debian 6.0, and I installed the GRUB booting device on my main boot record, as it was suggested that it was a harmless step to take. Unfortunately, some quirk in my system made GRUB believe that I had XP when in fact I have Vista, so the options I have now are to boot Debian or to boot XP which is not on my computer. In other words, I have to get rid of GRUB now, but I'm realizing that he's not such an easy customer to kick out. I have moved my Linux installation to another drive, but the old GRUB always stays in place, and my Vista is stuck there frozen for eternity. So after considering all kinds of possibilities, I have come to the conclusion that the easiest way to restore my original boot record would probably be to find its backup copy that I assume the installation program made, and to copy it back into the right address at the beginning of the disk. I don't have the Vista recovery CD, so I really have to do this manually. So now my questions are these: did the installation program make a copy of the boot track, and if so, where did he put it and under what name, and finally, what command can I use from within the Debian terminal, which is now my only tool left, to copy the content of thesaid file into the first 512 bytes of the hard drive? I know that would be a simple matter for any serious geek, I guess I must be a little rusty. Anybody feel up to it?
I have an old Dell Dimension 4500 that, until recently, had 2 hard drives. One drive is running Xubuntu Koala and the other was running XP. I had set up Xubuntu to run LVM.
After needing XP again for a small project I tried reinstalling XP, got disk errors, took the drive out to just have Xubuntu, and now when I boot I get "Error loading operating system".
I have tried restoring GRUB from a Live CD with no help. Everyplace I look on the net talks about restoring GRUB after installing Windows on another drive. I'm trying to get GRUB working again after removing the XP drive.
before i go and get rid of wubi for the real deal, i would like to know if i can get rid of ubuntu by doing a system restore. i never mind doing system restores and i have my recovery disks if needed.
OK, so about a week ago or so my Ubuntu 10.04 install no longer recognizes my iPod Touch or Iphone. I have had no luck getting them to work. i REALLY do not want to fresh install Ubuntu. Is there a way I can like repair or restore (a la "Window$") that will fix the OS itself without removing any programs or settings?
I updated 9.10 and system crashed during update and is now unbootable. It seems to freeze (or is just taking a really long time) at fsck. Is there any way to make my computer usable again without reinstalling the whole OS?
I would like to find out how to back up a complete Ubuntu system, and then restore it on a clean harddisk.I have been running dual booting with Win XP until now. I am running Ubuntu 10.04, but have installed quite few add-on. I would like to make an Ubuntu-only machine now, with all the same apps still there, but dont want to go and download everything again. I am looking for a way I can back this entire Ubuntu installation up, and then restore it to a clean drive.
I recently had to restore my system via clonezilla due to hdd failure. I frequently back up my /etc/apt folder as well as some other configuration files and settings that I use in my system to bring my restored image up to date with my ever changing preferences, etc.
I noticed the problem when I replaced the etc/apt folder with my backup version. After replacing the folder, I ran 'sudo apt-get update' and imported a list of all my previously installed software. Then I ran 'sudo apt-get upgrade'. I didn't get any errors at all during any part of the update and upgrade process.Then this popped up in my panel, and won't seem to go away.
On my laptop I dual boot Ubuntu 8.04 and Windows XP. During the last upgrade of my Ubuntu distro something went wrong and now I get a messed up GUI. In the meanwhile I got a new laptop on which I only run Ubuntu 9.10. So my question is: I want to delete the linux partition on my old laptop and use only Windows XP but since I use grub to dual boot, I'm afraid that deleting the linux partition and extending the Windows partition will cause problems to boot my computer. Here's a screenshot of my partitions:
I have a laptop with 250 GB SATA HD that has the following:
Win7 Pro installed first with sda1=system reserved partition, sda2=C: drive, sda5=separate software application programs to differentiate from Windows' Program Files. Ubuntu 9.10 was installed next (sda6=common swap partition for all Linux distros, sda7=Ubuntu root, sda8=Ubuntu home). Then Opensuse 11.2 was installed with sda12=root and sda13=home. Finally FedoraCore11 was installed with sda9=boot, sda10=root and sda11=home. Ubuntu and Suse have grub loader in their own root partitions.
Suse's grub menu controls all OS's. From this grub menu I can select Windows or any other Linuxes. Suse uses legacy grub because it was installed right after Ubuntu 9.10 which uses (legacy) grub.
Here is opensuse's grub menu:
# Modified by YaST2. Last modification on Wed Mar 31 11:49:28 EST 2010 # THIS FILE WILL BE PARTIALLY OVERWRITTEN by perl-Bootloader # Configure custom boot parameters for updated kernels in /etc/sysconfig/bootloader default 1
[Code]....
Somehow I also messed up Windows' boot file and boot partition table. Now I am still trying to use Windows installation CD to repair Windows but it has taken several hours and am still waiting for screen response. I cannot boot into any Linux distro either.
I have just foolishly used live media to install F14. Pre-upgrade of F13 to 14 repeatedly failed. Sadly I used the use all available space option rather than the free space. As a result I have a working FC14 system but no data from my F13 installation. Is there any way to restore my f13 system and/or data?
probably did something stupid.. just haven't figured out what yet.. hope someone can point me in the right direction. daughters computer broke, maybe virus, so i did clean reinstall of xp. decided to give her a couple of linux distros, thinking maybe they are safer for when she is surfing..
Used gparted to repartition hd:
Partition table entries are not in disk order
Installed Ubuntu 8.04. was then able to boot into either ubuntu or xp. next installed fedora 10. new menu.lst did not show ubuntu, only fedora and xp. had some lockups in fedora, and had to pull plug to reboot 2 or 3 times. replaced power supply. added ubuntu into menu.lst. boots into fedora and ubuntu fine. tried to boot xp, and get "Preparing System Recovery Option", then PC Angel appears, and it wants me to use the system restore option for xp.
Is there something i can do to recover xp without having to wipe the hd and reinstall xp, then reinstall ubuntu and fedora (and if i do all that, how can i be sure i don't end up with the same problem?
My Mini13 came with hardy preloaded, and it's got pretty messed up since, so I'd like to restore factory OS via a grub entry that looks like this: title System Restore root (hd0,2) chainloader +1 boot
This points to a partition which, when mounted, has this stuff in it: bootfs.img initrd0.img install.sh logo.png syslinux.cfg vmlinuz boot.msg install.cfg ldlinux.sys rootfs.img vesamenu.c32
I'm not a computer, but that looks pretty good to me but when I select this grub option it just says: Boot Error Is there a log or something that might give me more info about the error?
