The latest update installed a new linux header 2.6.35-23. The older version 2.6.35-22 also appears in grub. What would be the sense in keeping them both? And if not required how do I remove the older version from grub?
I tried: "sudo update-grub" which changed nothing.
I've had to give up trying to install linux. It just won't work on my machine, a Presario 6370us that has been upgraded over the years such that it is not compatible with linux, apparently. (You can read my travails elsewhere on this board; thanks very much to all who tried to help.)
Now, how do I remove the GRUB boot loader from my system? I need the system to boot directly to Windows XP.
I can't start linux in any way, shape, or form, so I need to either edit GRUB inside the GRUB environment itself, or to do so from Windows.
Ideally, I'd like to remove GRUB entirely. Failing that, I'd like to edit the GRUB config file so that only Windows is an option. Failing that, I need to make Windows the default OS.
Using exim4 only for sending email SMTP
I'd like to use Exim to remove the line header:
Received: from [111.111.111.111]
by HOSTNAME with esmtp (Exim 4.69)
what setting i should use and where should i put it in the exim4 configuration file, transport, router etc.
So today 2.6.31.17 came. to the b1tch of a cat sleeping on the keyboard, I was forced to a restart before I wanted.
Anyway why does each have have entries for :
linux-headers-2.6.31.17
linux-headers-2.6.31.17-generic
[code]...
How do I know which one I should use from the choice of 3 for the current kernelAnd if I understand which one to use, can I delete the others from the same imageAlso, in start-up manager I have choice of 4 from the drop down list?
I'm currently upgrading from 10.04 to 10.10 and the screen is stuck at:
Code:
*** 00_header (Y/I/N/O/D/Z) [default=N] ? y
Installing new version of config file /etc/grub.d/00_header ...
[code]...
I'm having some trouble removing unr from my asus eee pc 1005peb, I installed it about a month ago and sadly to say I need cash so I will be selling the eee pc. I want to restore it to factory settings. I already tried uninstalling unr, by deleting the partition it was on, that didn't work. Once I booted up again it gave me a grub error. So I reinstalled unr and now have a left over swap partition from the original install. I want the system to boot up as it did before the installation of unr. How would I go about doing this?
View 1 Replies View RelatedI'm just slightly confused here, but... what the? Why does installing grub-doc remove BOTH grub-pc, and grub-common? So basically it seems like by installing grub-doc, I have uninstalled grub totally (yes, it is still there as the bootloader, but i have no way of updating it now!) from my system. What's the conflict between grub-doc and grub-pc, such that grub-pc has to be removed?
View 5 Replies View RelatedI've a source code of a program and I know that to compile and install that program I've to do:
./configure --prefix=/opt/test
make
make install
Now I want the program to look for dependent libraries and header files first in a non system folder. Now how can i instruct "configure" and "make" script to look for dependencies first in a different folder without editing configure and Makefile. And after these folders are searched for dependencies by the script it can look in system folder. Is there any environment variable that i can supply to "configure" and "make"? Will that work without any conflict? what are these environment variables? And also if I use these environment variables do I need to edit the source code files?
I mean do I need to change these lines
Code:
#include <test1.h> ...
to
Code:
#include "test1.h" ...
If yes then is there any other way to compile them without modifying the source code?
So I wanted to get rid of ubuntu 10.10 on my HP pavilion dv6 laptop as I wanted to make some hd space. Its a dual boot with windows 7. I deleted the ubuntu partition and expanded the windows partition to fill the whole hard drive again. When I restarted my laptop I got the "error: no such partition. Grub rescue>" message.
I tried inserting my ubuntu 10.10 boot cd but whenever I boot from the cd I get the exact same grub rescue error. Is it possible to remedy this situation from the error? I am currently unable to download a windows recovery cd so I'm stuck in the grub rescue page unless its possible to fix this mess from the error prompt.
I have C++ source code(*.cpp) files that expects it's header files in System's include folder which is/usr/include.The cpp files has include lines like this:
Code:
#include <some.h>
#include <another.h>
[code]...
I have installed 11.2 next to my 11.1 version I have a few big problems with 11.2 and I like to completely remove it. there are 2 grub's active now. I want to remove the 11.2 grub and make the 11.1 grub master again, but I do not know where to change this, the MBR points to the 11.2 grub and changing menu.lst probably does not have any effect.
View 6 Replies View Relatedwhere can i get socket.h header file? will copy pasting this header file in 'incl' directory allow me to use it in the my program?
View 1 Replies View RelatedMy Server runs "fine", then I type init 6 for rebooting or some cron job initiates Init 6 and my system stops in grub at: GRUB loading stage1.5. Error 18 After another Ctrl+Alt+Del the system boots as if anything happened. this is why I doubt that it's an issue of too big HDD or BIOS.
View 2 Replies View RelatedI started another thread about this to get help booting into openSUSE after Fedora rewrote my bootloader and deleted all other entries. I managed to fix it but I never did find out why the following commands caused my system to boot to the grub shell instead of the grub menu.
Code:
grub
root (hd0,3)
setup (hd0)
quit
reboot
Can anyone explain to me why these commands caused my system to boot directly to a grub shell? It's as if there were no /boot/grub/menu.lst files for it to use, but after I got everything back to normal, the files were still there.
If it helps, this is how the drive was setup before and now, except Fedora was on /dev/sda4 and has since been deleted.
Code:
Device Boot Start End Blocks Id System
/dev/sda1 1 262 2104483+ 82 Linux swap / Solaris
/dev/sda2 263 13316 104856255 83 Linux
/dev/sda3 * 13317 14621 10482412+ 83 Linux
I'm using Ubuntu 9.10 , so I upgrade install the ubuntu.......
after that When i starting the Computer there showing old GRUB also..
NOW I WANT TO REMOVE OLD GRUB's..
I've had ubuntu installed on my system but removed it. If I try to start my computer (which should have Windows 7 on it) it gets "grub rescue>", due to that the only OS I have available is ubuntu from a CD (without actually installing) seeing as it won't load Windows. How can I remove grub? I searched on google but nothing I found works.
I suppose it's not just removing file system/boot/grub, I'm afraid doing that might screw my computer up even further.
I am trying to restore my system to Ubuntu 10.10, using a system backup made with REMASTERSYS. When I reboot, I get the message: GRUB error:15 I found many threads discussing this issue, most notably here: [URL]
[Code]....
I have Googled this one and I have tried several fixes so far nothing has worked. All I want to keep is these entries in my grub menu:
"Ubuntu, Linux 2.6.31-19-generic-pae"
"Ubuntu, Linux 2.6.31-17-generic-pae"
"Microsoft Windows XP Professional"
1st - Through Synaptic I removed:
linux-headers-2.6.31-14
linux-headers-2.6.31-14-generic-pae
linux-headers-2.6.31-15
linux-headers-2.6.31-15-generic-pae
[Code]...
had a dual booted laptop that i have removed XP from. now it still brings me to the boot menu how can i remove this so i will reboot into Ubuntu faster?
View 2 Replies View RelatedI need to reinstall both windows and ubuntu as dual boot. I tried to install windows 7 from the recovery partition but after windows starts the recovery and then does its first reboot it always loads to the grub prompt. I booted with ubuntu 10.10 live cd and wiped off all the partitions except the windows recovery partition and I tried sudo ms-sys -m /dev/sda3 which is supposed to restore the windows mbr but still when I reboot it just boots to the grub command prompt with windows only partially installed.
If I completely wiped off the old ubuntu partition and the windows partition then how can grub still be loading up? where is grub located? How to completely remove grub. I don't have a windows recovery cd, I only have the recovery partition which is still intact. I have tried to install ubuntu first and make an ntfs partition but when I try to install windows the recovery partition program says there is not enough space to install windows but there is 260gb.
I can't figure out how to remove a Ubuntu distro in grub that I no long have installed. I have Win 7, Ubuntu 10.4 installed but when I boot my grub menu shows Win 7, Ubuntu 10.4 and Ubuntu 10.10 that I have removed from my hard drive but still shows up in the menu. I have been trying many commands in the terminal menu to edit grub but nothing shows me how to remove a menu entry.
View 6 Replies View RelatedI'm having alot of trouble trying to remove linux ubuntu from my computer, so that i will only have windows vista. What's the easiest way, to totally remove anything on my harddisk with ubuntu, grub or whatever it's called?
View 1 Replies View RelatedThe other day I repartitioned the drive I had ubuntu on and today I go to start my computer and I get a grub rescue prompt. I tried the MBR fix on the vista install CD, but that didn't work. I'm basicly stuck on this liveCD until I can get this fixed.
View 1 Replies View RelatedHow can I remove entries manually that were automatically generated by grub 2? I have the scripts I need to add my entries, but I don't want the osprober to keep adding new entries. Even if I make the 30_osprober script non-executable, the entries are still there. Can I do this without "breaking the rules" and editing the grub.cfg file?
View 2 Replies View RelatedI have installed Kubuntu on a usb stick. I installed version 9.04 from a disk that came with linux magazine. After installation I can only boot pc if the usb stick is plugged into pc before I turn it on. I then gat a menu with 5 options. The first is Kubuntu and the last is Windows XP. If I try to boot my pc without the usb stick plugged in I get a GRUB error message.
I think this is the GRUB menu which means that it must have amended the Master Boot Record. If I try to boot my pc without the usb stick plugged in I get a GRUB error message. This is generally a minor inconvenience and a great security measure. My worry is that I am notorious for losing usb sticks. If I lose this one I wont be able to boot pc. Is there a way to remove GRUB and restore the MBR?
I have windows XP on one disk, I added another disk and I installed UBuntu 9.10 on it. I wish to temporarily remove the ubuntu disk, however grub cannot load unless that disk is connected. It appears that grub has got to the windows disk and my system was booting from there. I wish to remove grub from all disks, (or at least the windows disk). I tried removing it from the synaptic package manager, but it's still there (but it looks different, maybe another version loaded or something). I'd like to just be able to boot from either disk using my bios boot menu.
View 6 Replies View RelatedI am dual booting Windows 7 sda1 and Ubuntu 9.10 on one hard drive. The second hard drive is data only. My grub menu shows at the end of the menu
Windows 7 sda1
Windows 7 sdb1
I think this is because I had a bad "A" drive that I just replaced and before that I did a lot of changing of the mbr and grub commands. So there must be something on the "B" or second drive that is causing this. Right now everything is fine with my computer and this is just house keeping. I would like to delete the "Windows 7 sdb1" menu Item if possible. Just to be clear, windows boots with the sda1 command (first menu Item), and the "windows 7 sdb1" does nothing at all.
I have OS X, Ubuntu 10 x64 and Windows 7 x64 installed on my Macbook Pro new unibody. Right now when I choose Windows or Linux in the rEFIt boot menu both options take me to the GRUB menu, and I can boot everything but it's a bit redundant and annoying.
View 9 Replies View RelatedI need to remove an entry from my grub boot loader does anyone have a simple way to do this?
View 6 Replies View RelatedI recentely installed ubuntu to my second hard disk (on the first i had windows 7 and data), but the hard disk that i installed ubuntu on broke, so i had to trash it. The problem is that i have an external disk reader that is only bootable after i booted at least once into windows. So basically i can't boot using either Windows or Linux disks, nor can i boot into the os itself. When i start the computer i get something like device not fount and a long code, then a prompt shows up (Rescue GRUB). What do i need to type here to remove grub and be able to boot into windows?
View 1 Replies View Related
