Ubuntu Installation :: Release-upgrade From Apt-mirror Fails?
Oct 12, 2010
I have a local apt-mirror on my network that I use to upgrade my Ubuntu and Debian systems; works great, had it for years, used it to do release upgrades in the past. This time I'm trying to upgrade a fairly recently-installed 64-bit Lucid kubuntu machine to Maverick. When I try, I get this error:
Code:
After your package information was updated the essential package 'ubuntu-minimal' can not be found anymore.
This indicates a serious error, please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report.Anyone know the proper way to do this?
View 1 Replies
ADVERTISEMENT
Apr 17, 2010
Release upgrade ends up with error:
"Error during update. A problem occurred during the update. This is usually some sort of network problem, please check your network connection and retry. The server may be overloaded. Restoring original system state".
When doing do-release-upgrade -d to upgrade from karmik to lucid. I using local mirror ftp://ubuntu.snacho.ru (also have http that works but not browseable). When I change lines in /etc/apt/sources.list from local mirror to official [URL] all works fine. I don't want to download 1Gb from internet (because of traffic cost). What is wrong with local mirror ? I can communicate with its owner, but what he needs to change on the mirror ?
View 1 Replies
View Related
Jun 17, 2015
I am doing a new Debian install on an older Dell laptop (Latitude D520, but that should not matter). I downloaded the net install .iso, burned it to disk, and ran it. Everything was progressing like any other installation I have done until I was asked to pick the mirror. I chose ftp.us.debian.org like I normally do and it was rejected. When I checked the output on virtual console 4, I am seeing the message "mirror does not support the specified release (jessie)."
I tried a bunch of random mirrors, including international ones, and they all give me that message.
View 3 Replies
View Related
Jun 29, 2010
I have searched all over. I cannot find any info on the description of the Fedora mirror release directory structure and the reason for having a "Fedora" and "Everything" directory? Yes I looked at [URL] I mostly work with the Red Hat 5.x. The Fedora release software is kept on a mirror and the DVD release as, (using i386 release):
[Code]....
View 3 Replies
View Related
May 24, 2011
I have been trying to use the amd64 version of the natty mini iso installer. The installer crashes with the log stating bad address us.archive.ubuntu.com. This is true for any archive I select. error is: mirror does not support the specified release (natty) Anyone know of a working mirror or if one will ever work? Not a confidence builder in the development.
I also tried the Maveric version of the mini iso. It also crashes with complaints about a bad kernel. So far a wasted day. Just add to this I tried the normal natty iso. The problem is in the manual partitioning. It locks up solid while trying to set partitions. Is there a later release of the iso?
View 8 Replies
View Related
Apr 24, 2010
If I install the RC will I be able to upgrade to the final release, or will I have to do a complete reinstall?
View 5 Replies
View Related
Jun 13, 2010
I have the Ubuntu 10.04 beta, though It isn't the most stable,how can I upgrade, without having to burn a cd, from the Ubuntu 10.04 beta, to the Ubuntu 10.04 stable release?
View 9 Replies
View Related
Apr 27, 2010
I installed the RC of Lucid on an old AMD X2 5600 w/4GB DDR2 ram, and put it in the other room and installed LAMP on it to use as a local development server. It works beautifully over the network.
1. There will be an upgrade option to go from RC to final release, right?
2. When upgrading, will this kill my LAMP install? I really don't wanna go from scratch now that I have it all up and running with a load of CMS systems installed for test environments
View 2 Replies
View Related
Apr 29, 2010
My system says an upgrade is available, but when I click on Upgrade, I get: Could not download the release notes Please check your internet connection.My web browser can access the network fine.
View 9 Replies
View Related
Sep 6, 2010
I have installed Ubuntu 10.10. When the stable version is released, will I be able to upgrade to the stable version from the update manager, or will i have to install the stable version separate?What about 10.04 to 10.10 upgrade?
View 2 Replies
View Related
Mar 30, 2010
I'm now using Ubuntu 9.04 and I think of upgrading it to version 10.04 (when it shall be "stable").I'd like to know if I am supposed to modify /etc/apt/sources.list with the name of the new version even though I upgrade by "update-manager-core" with the command sudo do-release-upgrade
View 1 Replies
View Related
Apr 29, 2010
I've ensured that all current 9.10 updates have been installed, then tried to upgrade to 10.04.The message "Unable to download release notes - please check your internet connection" appears.Clearly my internet connection is working.I have had problems with Network Manager in the past (it is less problematic recently - see bug #481432 for details).If so, how do I get the upgrade started?
View 6 Replies
View Related
Jan 23, 2009
I am trying to upgrade RH9 to F10. I have downloaded dvd iso image i386. The SHA1 integrity check passes. The installer fails media check due to "errors". I did an independent verification of the DVD and zero errors found. Download was from Fedora's own torrent, so files should be verified anyway. If I bypass the media check I get the message : Running anaconda 11.4.1.62 the Fedora system installer - please wait.....
[Code]....
View 7 Replies
View Related
Jan 10, 2011
In trying to upgrade from 10.04 to 10.10, the installation fails when checking software channels. The error basically says that there are breaks, broken depends and unmet dependencies. Yet Package Manager shows that there are no broken packages and mostly everything is running OK except for the Suspend option which doesn't work in 10.04 on a good number of various laptops. I am using an IBM Thinkpad R51 laptop with 1.5 GHz and 512 MB RAM. I have never had a problem like this with any Ubuntu upgrade in the past. How can I get past this problem and upgrade to 10.10? Log files available upon request. If log files needed, Someone on Launchpad said it's because I have third party software installed. But, this never happened before with previous Ubuntu upgrades.
View 9 Replies
View Related
May 2, 2011
I tried to upgrade Mythbuntu from 10.10 to 11.04 but it fails to download three packages, stopping the upgrade from finishing. The APT source is au.archive.ubuntu.com
[Code]...
View 2 Replies
View Related
May 1, 2010
Installed v9 a couple of weeks back and have been causally mucking about with it since. I managed to get XP and ubuntu running as a dual boot system (which was an achievement ).
Anyway, i've upgraded to 10.04 - and already loving it. However... my XP o/s no longer boots. It use to prior to the upgrade. Now, when the XP o/s is selected from GRUB2, I just get a series of bleeps and a flashing _.
Now, I am a complete novice. I actually have no idea where to even begin trouble shooting GRUB2 (and i'm assuming its a problem with GRUB).
View 6 Replies
View Related
May 9, 2010
It seemed to upgrade the first round and looks like it booted back into Ubuntu (I had Purple background) and asked for updates and I installed them and on reboot I lose video when entering desktop. I see the initial purple Ubuntu loading screen, but when it goes away I lose video completely and my monitor says it's unplugged.
I tried the grub nomodeset without luck. I am at the desktop in safe mode. If someone can tell me how to edit a file to enable the graphics again, I'd be forever grateful. Sorry if this was answered, but search only gave me help with the Intel 850 graphics problems and not what I was seeking.
View 1 Replies
View Related
Jun 10, 2010
Dual boot Windows XP SP3 & Ubuntu 9.10 on a single hdd, w/2 partitions. Booted to Ubuntu and upgraded online. XP boots fine, but Ubuntu, not so much; a msg about /dev not found, followed by a shell login prompt. I suspect a grub problem, but haven't been able to find a definitive answer. Since I can at least boot XP, I do not want to do anything that would screw that up and leave me with no bootable OS. I did the "upgrade" shortly after 10.04 was released. Is there a way to reliably fix this w/o possibly screwing up my ability to boot XP, the only OS I can boot? I have no Ubuntu 10.04 disk, as I used their upgrade online option.
View 1 Replies
View Related
May 1, 2011
The Update Manager has tried to upgrade me to version 11 three times now, and fails each time.
First I get a warning, that probably isn't important: "Third party sources disabled
Some third party entries in your sources.list were disabled. You can re-enable them after the upgrade with the 'software-properties' tool or your package manager."
After the upgrade I get this:
"Could not install the upgrades The upgrade has aborted. Your system could be in an unusable state. A recovery will run now (dpkg --configure -a).
Upgrade complete The upgrade has completed but there were errors during the upgrade process."
The console has about six messages similar to this, all complaining about the vnc-e package:
"warning, in file '/var/lib/dpkg/available' near line 10992 package 'vnc-e': error in Version string '4.4.3_r16583': invalid character in version number"
View 5 Replies
View Related
May 1, 2011
I am trying to upgrade from Ubuntu 10.10 to 11.04.
When it gets to the end of the upgrade I get a dialog with the following error:
Quote:
Could not install the upgrades the upgrade has aborted. your system could be in an unusable state. A recovery will run now (dpkg __configure -a). code...
View 2 Replies
View Related
Aug 1, 2011
I just upgraded to ubuntu 11.04 but now all the kernels fail to boot. The resolution of grub changed and the older kernels are put into a 'previous kernels' folder. The most recent kernel halts at the message '* Stopping userspace bootsplash [ OK ]' and the previous kernels fail with the message 'Unlink after no-irq. Controller is probably using the wrong IRQ',
or show the background of the login screen with just a white box.
I think the cause is that I have an ATI graphics card (HD Radeon 3650), because on my 2 other computers ubuntu upgrades fine and they have NVIDEA graphics cards.
As a last resort I tried installing different distro's like Linux Mint but it also gived me the 'unlink after no-irq' message.
View 1 Replies
View Related
May 17, 2010
After digging around trying to figure out how to upgrade my local apt-mirror to 10.04, I figured I would share it here so anyone else who does this, can do it with ease. It requires a few steps, and editing a couple files, but the process is relatively painless.This assumes you have an apt-mirror already running on your server. Also it assumes you're using /var/www/ubuntu as your root where all your packages are stored.
The first step is to visit http://changelogs.ubuntu.com and download the meta-release packages. Create a new directory, /var/www/ubuntu/upgrade, and drop the files there.On the client's end, a single file needs to be edited, /etc/update-manager/meta-release. Change the URI's in that file to the URI of your apt-mirror and run your update manager. Your upgrade will start, only asking if you want to change your paths in your sources.list. Agree to it, and the packages will download and configure.
View 2 Replies
View Related
Apr 30, 2010
I've been trying all morning to update from a working 9.10 to 10.04 and unfortunately every time I try it blocks me.
An unresolvable problem occurred while calculating the upgrade: E:Unable to correct problems, you have held broken packages.
This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report.
Restoring original system state
I've uploaded the full apt log to pastebin here:
[URL]
View 9 Replies
View Related
May 19, 2010
I previously had Ubuntu 9.x and Windows 7 installed at my laptop after I decided to upgrade Ubuntu to 10.04.
After the upgrade finished, now at the boot selection menu I am able to select Windows 7, but after it starts it tries to fix some errors and says that it's unable to load. Ubuntu 10.04 loads just fine.
Code:
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x97646c29
[Code]...
View 2 Replies
View Related
Oct 11, 2010
After downloading the packages I get the following error message:
"Could not install the upgrades
Error during commit
'E:Couldn't configure pre-depend X11-common for x11-xkb-utils,
probably a dependency cycle.'
Restoring original system state".
View 1 Replies
View Related
Dec 7, 2010
I currently have a Dell Dimension 4100 from 2000 upgraded with an Nvidia Geforce 6200 video card and 160 gig hard drive, I just upgraded to Ubuntu 10.10 from 10.04 and once I restart, I hear a beep come out from my computer speaker, and then displays the following text:
Code:
GNU GRUB version 1.98+20100804-5ubuntu3 Minimal BASH-like line editing is supported. For the first word,TAB lists possible command completions. Anywhere else TAB lists possible device or file completions.
grub> I'm not used to typing in command line, but if anybody has a way around it for me, I'll be pleased. It's Ubuntu or Windows goes back on... or bust.
View 9 Replies
View Related
Dec 22, 2010
I had a 10.04 Wubi install on my Win7 notebook. I selected the option to upgrade to 10.10 from update manager. It downloaded all the updates, but reported that due to some problem, only a partial upgrade will be possible. I agreed. And now, when I select Ubuntu from the startup OS list, it just shows a blank screen and restarts within 3-5 seconds. What do I do??
View 5 Replies
View Related
Apr 26, 2010
While trying to upgrade from 9.10 to 10.04, I consistently get the error:
Failed to fetch http://ca.archive.ubuntu.com/ubuntu/...e_1.34_all.deb Hash Sum mismatch
I've tried on multiple computers and on virtual box, in all cases using alt-f2 typing 'update-manager -d' and following the instructions from there. I've also tried downloading the link separately but get the same error.
Any ideas? Should I just install it from scratch?
View 1 Replies
View Related
Sep 21, 2010
The following is a subset of error messages I'm getting when trying to do "apt-get upgrade" or "apt-get dist-upgrade" on a machine running ubuntu server 9.10 amd64:
Code:
Preparing to replace linux-image-2.6.31-22-server 2.6.31-22.60 (using .../linux-image-2.6.31-22-server_2.6.31-22.65_amd64.deb) ...
[code]....
View 2 Replies
View Related
Oct 11, 2010
I use the CD upgrade method to upgrade my kubuntu 10.04 to 10.10.Not to mention,the ISO image of the CD is this one :kubuntu-10.10-alternate-i386.iso.At the first run I choose YES for the prompt asking for internet connection or whatever, but I immediately realise that I have chosen a wrong option, so I exit and restart the upgrade all over again.On the second run, I choose NO for the prompt , then the installation continues until it reaches the 'fetching files' stage. It pops up and says "The upgrade has aborted. Please check your internet connection or installation media and try again. All files downloaded so far are kept."
I don't want to reinstall the whole system again because I want my applications;I don't want to use the updater to upgrade because I have a low internet speed .
View 5 Replies
View Related
