I am trying to upgrade from Ubuntu 10.10 to 11.04.
When it gets to the end of the upgrade I get a dialog with the following error:
Quote:
Could not install the upgrades the upgrade has aborted. your system could be in an unusable state. A recovery will run now (dpkg __configure -a). code...
I have a 1.0 ghz G4 eMac running Tiger. Using Ubuntu 10.04's Live-CD I installed 10.04 on a 8-gig USB flash drive and it worked very well despite spending nearly five hours to download its files via DSL and a pokey USB 1.1 port. The flash drive's 10.04 installation worked just fine on my eMac and 900mhz G3 iBook except for Airport wireless non-connecting issues.(I like Ubuntu 10.04 because unlike Mint for PPC, you're not hassled or barred from accessing your Mac HD and its files.) THEN, to resolve my wireless issues, I decided to upgrade to 10.10 which took nearly 12 hours, and it seemed to've installed well until I tried booting the flash drive and it doesn't work. I get the Ubuntu icon in the Startup Disk screen but it keeps returning to it even after I select Ubuntu. The error screen I get reads code...
View 5 Replies View RelatedI have an ASUS G51J notebook with Windows 7 installed. I was following This Guide. I set aside about 100GB for the Unallocated partition. When I started my laptop, I chose to boot from CD (which has an Ubuntu 10.10 ISO on it). I saw a purple background with two icons at the bottom of the screen, and eventually "Ubuntu" appeared in the center with a few dots underneath it. These dots would change color from left to right like a loading bar.
This is where my issue comes up. My friend was using this same CD on his Dell laptop and his desktop which has a XFX motherboard, Q6600 processor, and Invidia 470 graphics card. After this "loading bar" was done, he would be asked if he wanted to boot or install Ubuntu.
This didn't happen for me. What happened instead was that I saw what looked like my Windows desktop after having gone through a meat grinder. There were various icons randomly in pieces all over the place. The only icon that was in one piece (by chance) was my shortcut to Skype.
Has anyone seen this before? Am I doing something wrong? My friend was saying that maybe I should try with a fresh reinstall of Windows and try again. I wasn't even given the choice to just boot from disc. It got to the point where I expected it to give me the options to do so, but instead the Kansas version of my desktop shows up after being hit by an F5
Upgrade from 10.04 to 10.10 has froze on restarting SQL server. Any idea what's going on because there hasn't been any error message yet?
View 1 Replies View RelatedI did an upgrade and now after grub starts I get nothing but a blank screen. I should have left the well working alone. Any suggestions on what to do? I have no terminal, nothing any longer.
View 6 Replies View RelatedI am trying to upgrade RH9 to F10. I have downloaded dvd iso image i386. The SHA1 integrity check passes. The installer fails media check due to "errors". I did an independent verification of the DVD and zero errors found. Download was from Fedora's own torrent, so files should be verified anyway. If I bypass the media check I get the message : Running anaconda 11.4.1.62 the Fedora system installer - please wait.....
[Code]....
Who has successfully upgraded going from F7 x86_64 to F9 x86_64 using the yum approach? I have had about 0% success getting everything to work correctly doing a fresh install of F9. Everything works correctly in F7( sound, firefox/flash, networking, samba, etc ), so I figure that starting with something know to work and upgrading to F9 might be a better approach that starting with F9 and having it guess.
View 7 Replies View RelatedMy knowledge of how Linux works is very limited. I've used it for about a year, but just doing very basic tasks (browsing the Internet, listening to music, etc).
Anyway, I upgraded to the newest edition of Ubuntu and installed the new Grub as the update seemed to recommend installing it to every partition and hard drive. I've seen that other people are now having issues from doing that as well.
I am able to boot into Linux just fine; it is working great. However, when I attempted to load Windows XP from Grub, the computer would just restart. I followed the recommendation listed here: http://ubuntu-ky.ubuntuforums.org/sh...95&postcount=3 which seemed to fix the problem for Windows 7 users. Now, all I get when I attempt to load XP is a blank screen with nothing but a blinking cursor (but hey, at least the computer isn't just automatically re-booting, that's some sort of progress...maybe...)
I beleive I had version 9.x installed. I upgraded once and everything was fine. I went the upgrade manager again and it found some more upgrades. The upgrade messed with grub. It then told me there were no new upgrades. Then I rebooted and it says
Try (hd0,0): NTFS5
Then the screen clears and there is some text I can't read and then it says command not found. Then it reboots.
Is there a way to fix this?
If not is there a way to recover the files from the disk image file.
In trying to upgrade from 10.04 to 10.10, the installation fails when checking software channels. The error basically says that there are breaks, broken depends and unmet dependencies. Yet Package Manager shows that there are no broken packages and mostly everything is running OK except for the Suspend option which doesn't work in 10.04 on a good number of various laptops. I am using an IBM Thinkpad R51 laptop with 1.5 GHz and 512 MB RAM. I have never had a problem like this with any Ubuntu upgrade in the past. How can I get past this problem and upgrade to 10.10? Log files available upon request. If log files needed, Someone on Launchpad said it's because I have third party software installed. But, this never happened before with previous Ubuntu upgrades.
View 9 Replies View RelatedI tried to upgrade Mythbuntu from 10.10 to 11.04 but it fails to download three packages, stopping the upgrade from finishing. The APT source is au.archive.ubuntu.com
[Code]...
Installed v9 a couple of weeks back and have been causally mucking about with it since. I managed to get XP and ubuntu running as a dual boot system (which was an achievement ).
Anyway, i've upgraded to 10.04 - and already loving it. However... my XP o/s no longer boots. It use to prior to the upgrade. Now, when the XP o/s is selected from GRUB2, I just get a series of bleeps and a flashing _.
Now, I am a complete novice. I actually have no idea where to even begin trouble shooting GRUB2 (and i'm assuming its a problem with GRUB).
It seemed to upgrade the first round and looks like it booted back into Ubuntu (I had Purple background) and asked for updates and I installed them and on reboot I lose video when entering desktop. I see the initial purple Ubuntu loading screen, but when it goes away I lose video completely and my monitor says it's unplugged.
I tried the grub nomodeset without luck. I am at the desktop in safe mode. If someone can tell me how to edit a file to enable the graphics again, I'd be forever grateful. Sorry if this was answered, but search only gave me help with the Intel 850 graphics problems and not what I was seeking.
Dual boot Windows XP SP3 & Ubuntu 9.10 on a single hdd, w/2 partitions. Booted to Ubuntu and upgraded online. XP boots fine, but Ubuntu, not so much; a msg about /dev not found, followed by a shell login prompt. I suspect a grub problem, but haven't been able to find a definitive answer. Since I can at least boot XP, I do not want to do anything that would screw that up and leave me with no bootable OS. I did the "upgrade" shortly after 10.04 was released. Is there a way to reliably fix this w/o possibly screwing up my ability to boot XP, the only OS I can boot? I have no Ubuntu 10.04 disk, as I used their upgrade online option.
View 1 Replies View RelatedThe Update Manager has tried to upgrade me to version 11 three times now, and fails each time.
First I get a warning, that probably isn't important: "Third party sources disabled
Some third party entries in your sources.list were disabled. You can re-enable them after the upgrade with the 'software-properties' tool or your package manager."
After the upgrade I get this:
"Could not install the upgrades The upgrade has aborted. Your system could be in an unusable state. A recovery will run now (dpkg --configure -a).
Upgrade complete The upgrade has completed but there were errors during the upgrade process."
The console has about six messages similar to this, all complaining about the vnc-e package:
"warning, in file '/var/lib/dpkg/available' near line 10992 package 'vnc-e': error in Version string '4.4.3_r16583': invalid character in version number"
I just upgraded to ubuntu 11.04 but now all the kernels fail to boot. The resolution of grub changed and the older kernels are put into a 'previous kernels' folder. The most recent kernel halts at the message '* Stopping userspace bootsplash [ OK ]' and the previous kernels fail with the message 'Unlink after no-irq. Controller is probably using the wrong IRQ',
or show the background of the login screen with just a white box.
I think the cause is that I have an ATI graphics card (HD Radeon 3650), because on my 2 other computers ubuntu upgrades fine and they have NVIDEA graphics cards.
As a last resort I tried installing different distro's like Linux Mint but it also gived me the 'unlink after no-irq' message.
I use joomla and it only works with php5.2
I keep having to downgrade because ubuntu tried to upgrade to php5.3 everytime I try to upgrade something.
For instance, I just upgraded wine and didnt notice php5.3 in there as a dependancy, so now have to downgrade AGAIN!
Is there a way to upgrade wine without upgrading php as well?
I've been trying all morning to update from a working 9.10 to 10.04 and unfortunately every time I try it blocks me.
An unresolvable problem occurred while calculating the upgrade: E:Unable to correct problems, you have held broken packages.
This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report.
Restoring original system state
I've uploaded the full apt log to pastebin here:
[URL]
I previously had Ubuntu 9.x and Windows 7 installed at my laptop after I decided to upgrade Ubuntu to 10.04.
After the upgrade finished, now at the boot selection menu I am able to select Windows 7, but after it starts it tries to fix some errors and says that it's unable to load. Ubuntu 10.04 loads just fine.
Code:
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x97646c29
[Code]...
After downloading the packages I get the following error message:
"Could not install the upgrades
Error during commit
'E:Couldn't configure pre-depend X11-common for x11-xkb-utils,
probably a dependency cycle.'
Restoring original system state".
I have a local apt-mirror on my network that I use to upgrade my Ubuntu and Debian systems; works great, had it for years, used it to do release upgrades in the past. This time I'm trying to upgrade a fairly recently-installed 64-bit Lucid kubuntu machine to Maverick. When I try, I get this error:
Code:
After your package information was updated the essential package 'ubuntu-minimal' can not be found anymore.
This indicates a serious error, please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report.Anyone know the proper way to do this?
I currently have a Dell Dimension 4100 from 2000 upgraded with an Nvidia Geforce 6200 video card and 160 gig hard drive, I just upgraded to Ubuntu 10.10 from 10.04 and once I restart, I hear a beep come out from my computer speaker, and then displays the following text:
Code:
GNU GRUB version 1.98+20100804-5ubuntu3 Minimal BASH-like line editing is supported. For the first word,TAB lists possible command completions. Anywhere else TAB lists possible device or file completions.
grub> I'm not used to typing in command line, but if anybody has a way around it for me, I'll be pleased. It's Ubuntu or Windows goes back on... or bust.
I had a 10.04 Wubi install on my Win7 notebook. I selected the option to upgrade to 10.10 from update manager. It downloaded all the updates, but reported that due to some problem, only a partial upgrade will be possible. I agreed. And now, when I select Ubuntu from the startup OS list, it just shows a blank screen and restarts within 3-5 seconds. What do I do??
View 5 Replies View RelatedWhile trying to upgrade from 9.10 to 10.04, I consistently get the error:
Failed to fetch http://ca.archive.ubuntu.com/ubuntu/...e_1.34_all.deb Hash Sum mismatch
I've tried on multiple computers and on virtual box, in all cases using alt-f2 typing 'update-manager -d' and following the instructions from there. I've also tried downloading the link separately but get the same error.
Any ideas? Should I just install it from scratch?
The following is a subset of error messages I'm getting when trying to do "apt-get upgrade" or "apt-get dist-upgrade" on a machine running ubuntu server 9.10 amd64:
Code:
Preparing to replace linux-image-2.6.31-22-server 2.6.31-22.60 (using .../linux-image-2.6.31-22-server_2.6.31-22.65_amd64.deb) ...
[code]....
I use the CD upgrade method to upgrade my kubuntu 10.04 to 10.10.Not to mention,the ISO image of the CD is this one :kubuntu-10.10-alternate-i386.iso.At the first run I choose YES for the prompt asking for internet connection or whatever, but I immediately realise that I have chosen a wrong option, so I exit and restart the upgrade all over again.On the second run, I choose NO for the prompt , then the installation continues until it reaches the 'fetching files' stage. It pops up and says "The upgrade has aborted. Please check your internet connection or installation media and try again. All files downloaded so far are kept."
I don't want to reinstall the whole system again because I want my applications;I don't want to use the updater to upgrade because I have a low internet speed .
I am trying to upgrade from F11 to F12.Using Preupgrade, everything went well and then it asked me to Reboot. Anaconda started then says something about updating some files then the screen goes blank.
View 14 Replies View RelatedThe upgrade using yum and preupgrade fails
after reboot of the system
-> retrieve install image, ok
-> examine storage (or similar), ok
-> transfer install image to disk, ok
-> dependency check in install packages, ok
-> start installation process, ok
-> preparing to install
=> there was an error running yout transaction for the following reason(s): insufficient diskspace
you need more space on the following filesystems: 1089 M on unfortunately not more information displayed. only exit possible. Any experiences with this kind of behaviour? Many thanks for any feedback.
When I ran the distribution upgrade from 9.04 in update manager, my screen went blank on reboot and will not recover. Every time I reboot, screen goes blank. I cannot press CTRL-ALT F1 - F6 to gain access to text shells.
I tested booting from the 9.04 live CD and it works fine. So I downloaded the 9.10 live cd on another computer and booted it on the disabled system. Same exact problem on the live CD that I had upon installation: on boot screen goes black and cannot access text shells.
What can I do next to get out of this short of going back to 9.04, which has problems that I do not want to live with?
I had an old machine running Feisty.I followed the EOL guides and upgraded from 7.04 => 7.10 => 8.04 => 8.10 (intrepid).Now that I'm at intrepid, I want to use the update manager to upgrade to 9.04 (Jaunty). Whenever I launch update manager (System->Administration->Update Manager) everything looks fine until I choose "New distribution release '9.04' is available" and click the Upgrade button.
At this point, Update Manager complains and says "Could not find the release notes" "The server may be overloaded". I'm assuming this could be a faulty URL somewhere, but I wouldn't know where. My sources.list seems to work fine for regular intrepid updates, so not sure there would be anything there that could be the fault. Once I get this error, I can only click "close".
Extracting the upgrade failed. There may be a problem with the network or with the server. Obviously, my general networking is fine (or I wouldn't be able to post this message)..and again, standard updates work fine.Any insight into what is causing this (or maybe how Update Manager works so that I might try a bit of debugging myself?
