Ubuntu Installation :: Errors Upgrading Release From Local Mirror
Apr 17, 2010
Release upgrade ends up with error:
"Error during update. A problem occurred during the update. This is usually some sort of network problem, please check your network connection and retry. The server may be overloaded. Restoring original system state".
When doing do-release-upgrade -d to upgrade from karmik to lucid. I using local mirror ftp://ubuntu.snacho.ru (also have http that works but not browseable). When I change lines in /etc/apt/sources.list from local mirror to official [URL] all works fine. I don't want to download 1Gb from internet (because of traffic cost). What is wrong with local mirror ? I can communicate with its owner, but what he needs to change on the mirror ?
View 1 Replies
ADVERTISEMENT
Oct 12, 2010
I have a local apt-mirror on my network that I use to upgrade my Ubuntu and Debian systems; works great, had it for years, used it to do release upgrades in the past. This time I'm trying to upgrade a fairly recently-installed 64-bit Lucid kubuntu machine to Maverick. When I try, I get this error:
Code:
After your package information was updated the essential package 'ubuntu-minimal' can not be found anymore.
This indicates a serious error, please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report.Anyone know the proper way to do this?
View 1 Replies
View Related
Jun 17, 2015
I am doing a new Debian install on an older Dell laptop (Latitude D520, but that should not matter). I downloaded the net install .iso, burned it to disk, and ran it. Everything was progressing like any other installation I have done until I was asked to pick the mirror. I chose ftp.us.debian.org like I normally do and it was rejected. When I checked the output on virtual console 4, I am seeing the message "mirror does not support the specified release (jessie)."
I tried a bunch of random mirrors, including international ones, and they all give me that message.
View 3 Replies
View Related
Jan 9, 2010
I'm using f12. My university has recently become a mirror for fedora packages. But i'm facing a trivial problem. I have set proxy for yum so that the packages that are not available on local mirror can be downloaded from other mirrors. But then i don't know how to set no proxy for my local server. Consequently it is not using my local mirror at all. Tell me how to set no proxy for the local mirror. I want my local mirror because it's damn fast. My proxy settings are like this (they go in /etc/yum.conf):
[code]....
View 2 Replies
View Related
Jun 29, 2010
I have searched all over. I cannot find any info on the description of the Fedora mirror release directory structure and the reason for having a "Fedora" and "Everything" directory? Yes I looked at [URL] I mostly work with the Red Hat 5.x. The Fedora release software is kept on a mirror and the DVD release as, (using i386 release):
[Code]....
View 3 Replies
View Related
Apr 1, 2010
I'm fed up with Gentoo and would like to migrate to Ubuntu. I just installed 10.04 Beta, but I'm wondering if I should continue configuring my system. Is it possible/easy/painless to upgrade to the release version when it comes out? Or should I stop investing any work into the beta right now and wait for the release?
View 3 Replies
View Related
May 24, 2011
I have been trying to use the amd64 version of the natty mini iso installer. The installer crashes with the log stating bad address us.archive.ubuntu.com. This is true for any archive I select. error is: mirror does not support the specified release (natty) Anyone know of a working mirror or if one will ever work? Not a confidence builder in the development.
I also tried the Maveric version of the mini iso. It also crashes with complaints about a bad kernel. So far a wasted day. Just add to this I tried the normal natty iso. The problem is in the manual partitioning. It locks up solid while trying to set partitions. Is there a later release of the iso?
View 8 Replies
View Related
Jan 11, 2010
I've just set up the local mirror for my 96 CentOS 5 workstations. The mirroring script is taken from public-mirror howto and looks like this:
#!/bin/sh
rsync="/usr/bin/rsync -avHzL --delete --delay-updates" # replaced -q with -v for debuging purposes, removed --bwlimit, added -L to follow symlinks
mirror=centos.politechnika.lublin.pl::CentOS # tried several different same result
[Code]....
I tested mirror consistency by putting the mirror addres I'm syncing with, directly into repo file. Than yumex works fine. I tried several different mirrors with the same result.
View 3 Replies
View Related
Apr 7, 2010
If I went ahead and installed the Ubuntu 10.04 BETA version, would I be able to update it to the release version from within Ubuntu without having to boot from CD again (so just by the software updater)?
View 2 Replies
View Related
Feb 13, 2011
Press
Code:
Alt+F2
and type
Code:
update-manager -d
This should show the option to upgrade to the latest alpha release of natty. Through the terminal this can be done using the same command but you need use.
Code:
sudo
or
Code:
sudo -s
to do this.
View 5 Replies
View Related
May 12, 2010
I upgraded to 8.04 on AMD64 machine. I started to upgrade to 10.04 LTS using the System -> Admin -> Update manager. After packages started installing began getting MANY error popup windows saying dpkg exiting with errors. Looking at the terminal window I see a lot of "cannot utime" and it appears to be some error with tar. I saw on another forum that Lucid has a bug with tar. Now the distribution upgrade has just locked. What should I do?
View 6 Replies
View Related
Jun 9, 2011
The school where my wife works has a local repository, which makes upgrading really easy (considering I live in Ethiopia and bandwidth is limited...). But the problem is that I don't know how to upgrade the sources. They are all still saying Lucid instead of Natty.
how do I update my sources so that they are relevant for Natty? Is it just a matter of changing "lucid" to "natty"? Or something more complicated?
View 3 Replies
View Related
Apr 23, 2010
Alright, I have downloaded the upgrade for 10.04 and installed upgraded from my previous 8.04. Everything was working all fine until I had to reboot my pc. When I did i got some errors
Mount: Mounting none on /dev
It goes on to tell me that my UUID does not exist. Then it says
ALERT! Alert! /dev/disk/by-uuid/xxxxxxxx-xxxx-xxxx-xx$ does not exist. Dropping to a shell! It then drops to a very simple shell which has no flexibility and is very frustrating.
EDIT: This is the full error message
Mount: Mounting none on /dev
boot args cat /proc/cmdline
check rootdelay =(did the system wait long enough?)
check root =(did the system wait for the right device?)
missing modules ( cat /proc/modules)ALERT! /dev/mapper/debian-root does not exist dropping to a shell.
View 5 Replies
View Related
May 10, 2010
If I wanted to upgrade multiple computers to 10.04 using a location on my local network rather than burn my broadband download quota at 700mb per install, where would I go to get the files or archive containing the upgrade?
View 2 Replies
View Related
Feb 17, 2010
I've been trying to upgrade my installation for some time now and just can't quite get it right. I would upgrade from the DVD but the installer hangs when it says "Looking for installation images on CD device /dev/sr0". However, that's not really my question. I've resorted to the upgrade instructions as found at [URL]. If I don't use the '--skip-broken' option it complains about the following:
abrt-gui-0.0.11-1.fc12.x86_64 from fedora
abrt-libs-1.0.6-1.fc12.x86_64 from updates
samba-3.4.5-55.fc12.x86_64 from updates
samba-client-3.4.5-55.fc12.x86_64 from updates
samba-common-3.4.5-55.fc12.x86_64 from updates
samba-winbind-3.4.5-55.fc12.x86_64 from updates
samba-winbind-clients-3.4.5-55.fc12.x86_64 from updates
If I use the skip broken option, it then complains about:
Transaction Check Error:
file /usr/share/locale/de/LC_MESSAGES/cryptsetup.mo from install of cryptsetup-luks-1.1.0-0.4.fc12.x86_64 conflicts with file from package cryptsetup-luks-1.0.6-7.fc11.i586
file /usr/share/locale/sv/LC_MESSAGES/cryptsetup.mo from install of cryptsetup-luks-1.1.0-0.4.fc12.x86_64 conflicts with file from package cryptsetup-luks-1.0.6-7.fc11.i586
file /usr/share/man/man8/cryptsetup.8.gz from install of cryptsetup-luks-1.1.0-0.4.fc12.x86_64 conflicts with file from package cryptsetup-luks-1.0.6-7.fc11.i586
I can't seem to remedy this problem. There were other conflicts but I just removed those packages. When I attempt to remove 'cryptsetup-luks' it then tells me it's going to remove something like 200 others which did not sound like a good idea.
View 14 Replies
View Related
May 17, 2010
After digging around trying to figure out how to upgrade my local apt-mirror to 10.04, I figured I would share it here so anyone else who does this, can do it with ease. It requires a few steps, and editing a couple files, but the process is relatively painless.This assumes you have an apt-mirror already running on your server. Also it assumes you're using /var/www/ubuntu as your root where all your packages are stored.
The first step is to visit http://changelogs.ubuntu.com and download the meta-release packages. Create a new directory, /var/www/ubuntu/upgrade, and drop the files there.On the client's end, a single file needs to be edited, /etc/update-manager/meta-release. Change the URI's in that file to the URI of your apt-mirror and run your update manager. Your upgrade will start, only asking if you want to change your paths in your sources.list. Agree to it, and the packages will download and configure.
View 2 Replies
View Related
Jan 17, 2011
I have problem upgrading my ubuntu 10.04 lucid to a newer release of Ubuntu. I have done updates regularly but nothing prompt regarding upgrading Ubuntu. as mentioned in Ubuntu website, updating must result in a notification of upgrading. I want to know if there is any way to do this manually?
View 4 Replies
View Related
Nov 6, 2009
I created a local mirror with a DVD Image, is there a way to get this mirror to 5.4 now?I already updated the updates/extras repo, but now my main-repo is outdated and my updates go wrong.my directorystructure looks like this:
/server/rpmrepo/centos/5]
# ls
centosplus extras os updates
and the os folder:[code].....
View 3 Replies
View Related
Aug 22, 2011
I am trying to create a local mirror/repository for CentOS 5.6 for updates and network installs. I have read the page here on the site about how to do it over and over again, and I still can't figure it out. I have already created the directory, but right after that, I can't go any further. I know this is much easier than I probably think it is. Would someone mind telling me, (in beginners terms) on how to do this? I just want the 'os' package and nothing else.
View 1 Replies
View Related
Aug 27, 2010
I have a remote drive mounted on my system(ubuntu 10.04 x64), and i have the contents of that drive backed up to dropbox. the problem is, if i unmount the drive, the files disappear from dropbox. is there a way to mirror the contents of the network drive to a localfolder(preferably in such a way that all changes and file deletions are changed on the local folder instantly, but unmounting doesn't delete it all)? It looks like rsync would work, but im not sure how to make it work.
View 2 Replies
View Related
Jan 30, 2009
I have been looking into setting up a local repository for updates etc as we have an increasing number of fedora clients/servers. Searching the web I found multiple how-to's on how to accomplish this little project. One thing that bothers me is that each how-to seems to refer to a "static URL" mirror for rsync to get the rpms.
View 1 Replies
View Related
Mar 24, 2011
I just changed repos back to a standard CentOS base repo due to the custom one I was using needing https, and due to a proxy issue, only have http.When I run yum update, it finds that the path for the mirrors is off slightly giving me 404 errors.
View 7 Replies
View Related
Apr 2, 2011
I have been getting these errors while running update manager and I can't seem to find specific information or how to resolve these problems. Was hoping someone could please provide me with some details about why they are occurring so I can deal with them myself next time and how I can go about fixing them now.
Quote:
W: Failed to fetch http://mirror.pacific.net.au/linux/u...ic/Release.gpg Could not connect to mirror.pacific.net.au:80 (61.8.0.17), connection timed out
W: Failed to fetch http://mirror.pacific.net.au/linux/u...tion-en_GB.bz2 Unable to connect to mirror.pacific.net.au http:
[code]....
View 9 Replies
View Related
Aug 3, 2009
As the title says I'm trying to build myself a local RPM mirror. I have multiple laptops and a desktop that use Fedora 11. So I used 'rsync' to setup and sync my directories. I next went on to create my repo with the 'createrepo' function. I run my server backend as FreeBSD so I moved my data over there and setup my 'lighttpd' service.
Everything went fine until I used 'rsync' and synced up my data. Am I supposed to run 'createrepo' after each sync? If so, does anyone else use the same kinda setup, even if not FreeBSD, but a different os other than linux for their server that they run this from? I've been dealing with this for 2 weeks now and finally gave up researching and testing and thought. Not something I'm good at doing. Check my register date and my first post date.
Edit: FreeBSD doesn't have a port or unofficial port for this. I noticed it seems to be written as a python script so thought I could somehow get it to run on FreeBSD with linux emulation.
View 7 Replies
View Related
Feb 18, 2011
I currently have a server that is running on the Linux kernel 2.6.18-128.7.1.el5xen and I was wondering if it was possible to upgrade it to a new official Red Hat non-xen kernel(currently 2.6.37.1).What is unique about this kernel is that it is NOT a virtual system kernel but an older XEN kernel with proprietary material removed.If it is possible I was wondering about any repercussions that may occur as a result of said update. This would include, any issues with potential data/driver losses as well as recovery procedures that may be used if something would happen to it during the upgrade.
View 2 Replies
View Related
Jan 8, 2011
Shortly after upgrading to Meerkat I discovered that my macbook timemachine backups became unreliable to the point of uselessness. After a bit of googling it appears that Meerkat's version of Netatalk (2.1.2) has some issues that bust timemachine. These issues are supposedly fixed in version 2.1.3. So... what is the best way for me to go about upgrading Netatalk past the official Meerkat release version?
The Netatalk project is at version 2.1.5. I could uninstall the Meerkat packages and just try to build Netatalk directly from source. However I'm a little leary about losing all of my existing AFPD filesystem meta-data. The Natty Narwhal repository appears to have version 2.1.4 which I've read should solve my problem. Is there any way to install the binaries from the Natty repositories? Can I download the source package from the Natty repositories and rebuild the package with Meerkat libraries/dependencies?
View 6 Replies
View Related
Jul 29, 2009
I'm new here and hope to profit from your immense linux knowledge and of course to share my own experience where I can.
I'm in a student organization and we use a file server that runs linux. I can log in through ssh and copy using scp using login and password (no rsa/dsa keys because most users are windows users using winSCP and they're lacking in computer knowledge so we don't require them to mess around with keys)
However, I don't have network access everywhere, so I'd like to make a copy on my laptop harddisk of some of the folders I use most frequently. Note that I don't need it to copy files from my pc back to the remote server so I don't need two-way sync. Deleting the local copy every time and downloading a new full copy is not an option as we are talking about several gigabytes and the download speed is limited. Normally I would use Unison, however, this requires unison to be installed on both pc's and I can't install any software on the file server so this is not an option.
Any ideas on how to achieve this? I'm reasonable knowledgable about linux so I don't mind tinkering with some config files and using command line applications.
View 1 Replies
View Related
Mar 7, 2011
As I have 15 repo's enabled in Yast it a bit tedious changing them in the package manager, is there an easier way to bulk change them? Something like doing a kfilereplace on the /etc/zypp/repos.d/ folder and changing all occurances of 11.3 to 11.4 (in all *repo, which are all the files in the folder). Will this work?
View 9 Replies
View Related
Jan 30, 2010
I am thinking about setting up a local Debian Repository mirror. I want it to mirror just the Debian Repo at [URL].. Anyone have any idea how much disk space I might need to do it?
View 3 Replies
View Related
Feb 10, 2010
I know there has to be an easier way to do this than to download each file individually. On an ftp site I would just use
PHP Code...
But with those files being on an HTTP server and wget not supporting HTTP file globbing I'm at a loss.
What is a one step method to recursively download all files in a directory on an HTTP server?
View 5 Replies
View Related
