Ubuntu Installation :: Reinstall 10.04 Lucid Lynx / "Could Not Locate Remote Server"?
May 15, 2010
I upgraded from 9.10KK to 10.04LL recently. The process did not go well. I was first instructed to update KK, which I did. The update and subsequent upgrade had various difficulties, the specifics of which I do not recall. 10.04 ran,with various errors and abnormalities, for a couple days.
I have a Compaq Presario, SR1503WM with 750 meg of RAM. I normally boot to Ubuntu on my primary harddrive, but can redirect to a Win2K boot from the other drive. I'm in Windows now, sending this.
If I do a normal boot now, to Ubuntu, and select FF or Opera, I get "Could not Locate Remote Server". It suggests I uncheck "Work Offline". I do and this still gets me nowhere.
I went to System/Admin/Network Connections and all of the tabs were empty. In the WIRED tab, I clicked on ADD and a new WiredConnection1 was established, and,after reboot, is still there, but it does nothing.
I have a cable connecting me to the modem, haven't tried to install wireless yet. This has been sufficient for months, and as I said, still works for Windows.
I think I should go ahead and ReInstall 10.04LL. I upgraded without an install disk.
View 9 Replies
ADVERTISEMENT
Aug 30, 2010
I want to install Ubuntu Server distro. First i downloaded ubuntu-10.04.1-server-amd64.iso and "burned" it to my usb-pen using UltraIso software for windows. That booted from the usb, but just after punshing in the language etc it complains that it cant find the cdrom or something like that. then i try the [url], but that wont boot at all with this same iso mentioned above. and burn it to a darn CD. it boots, but somewhere during the process it stops and asks for the same cd that is actually in the drive already. there is a thread about this here: [url] I then wanted to find an easy iso that i could throw on my usb-pen and install the whole thing through ftp like i did in the old days with floppies. but man, i got lost in the documentation with no clear path on how to do it.
View 1 Replies
View Related
Jul 25, 2010
I was running a small LAMP setup on my homenetwork with Ubuntu 9.4. Every thing was working OK. I then upgraded to 10.04 and now my php does get executed. Apache is still working, but I suspect something in the config has changed, but I don't know what.When I try to load a .php file, the resultant web page is just blank, if I have a .html file with php code in it, the page is not rendered from the point where the php starts. I have checked /var/log/apache2/error.log and there is nothing in that file.
View 5 Replies
View Related
Jun 14, 2010
I just installed opendkim but I have no idea how to set it up.
View 2 Replies
View Related
Jun 7, 2010
We are using linux (Ubuntu ) to host our website and mails. There was a power problem and after restarting our servers, we are unable to access the co. website. When i try to access the mail by typing mail.domain, i am able to access the login page from within the network. Someone out of the network is unable to find the page[URL]
View 4 Replies
View Related
Apr 30, 2010
I have tried out Lucid Lynx Beta 1 back in march. During the installation I was announced that support for bluetooth was dropped. I installed anyway, thinking it would be back in the Final Release. Meanwhile (between March and April) I reinstalled Karmic because I really needed the bluetooth. I can see in the upgrade that bluetooth still isn't available. What should I do about this? Is there a way to keep Lucid Lynx and bluetooth? Or will I have to stay on Karmic until the end of times?
View 5 Replies
View Related
May 9, 2010
I had to do quite a lot of digging before I managed to work out how to do this. It turns out to be reasonably straight forward, and so here is my howto all in one place.
Objective: Connect to my Ubuntu (Lucid Lynx) Desktop machine (which does not have a screen or keyboard) using a remote desktop viewer and get my usual GNOME desktop interface. And have the desktop persist while I am not disconnected.
I have recently discovered one niggly issue with some of the keys being messed up. 'm' and 's' in particular? I am looking into it and will update this post when I have resolved it.
The following steps were performed on a freshly installed version of Ubuntu 10.04-desktop. Just for clarity:
Code:
Install a VNC server. There is a choice of servers I chose the "tight" one.
Code:
Setup your VNC password. This password isn't very important as my setup will only allow for connections via SSH, so 123456 is what I used. One can possibly disable it?
Code:
At this point or the first time you run 'vncserver' (I forgot to check) the all important and much discussed ~/.vnc/xstartup file is auto generated. This is the make or break place where you can either get GNOME over VNC or not. My xstartup which required NO changes was:
Code:
Give the VNC server a test, by running it from the command line.
Code:
Try connecting to the VNC server:
Code:
Ok if that all worked then great! It all did for me and my machine was fresh from the CD.
Now we setup the VNC server to run all the time. There are a variety of ways of doing this. Since this howto requires the use of a SSH shell one could quite easily run the vncserver (as we did above to test it) and then disown (haven't tested if this is actually required) commands the first time you connect. This would leave the VNC server running until you used the vncserver --kill command. This would be a suitable approach if you had many different users wanting to have VNC GNOME desktops.
For convenience in a single user setup we can get the VNC server to be started at boot time:
Code:
Make the contents of 'vncserver.user' (credits to some smart guy on some blog out there that I couldn't find again. and then I made a few improvements):
Code:
View 9 Replies
View Related
Apr 30, 2010
Both in 32 and 64 bit I cannot boot kernel-rt. Message displayed: mounting none on /dev failed: no such device. Then get login message in text console, gdm cannot start.
View 1 Replies
View Related
May 1, 2010
While leaving my laptop to install the upgrades, I hadn't noticed how the power cord had slipped loose. When I came back my computer must have shut off due to battery loss. When I booted up my computer again, I couldn't boot up Ubuntu under any of the kernels, -20,-19, etc. I get cryptic messages such as "unable to enumerate USB device on port 2," device not accepting messages," and "device descriptor read." i definitely intend to recover my data. I had been upgrading from 9.10 to the latest version of lucid lynx.
View 6 Replies
View Related
May 23, 2010
Decided to try out Ubuntu instead of automatically getting the next Windows OS.
I have a Dell Dimension E310 with on board video card (will be relevant soon, I think).
After trying making my own CD and not being able to at least run the LiveCD (thought it was my fault even thought the MD5 #'s matched correctly), I went to Shipit and got a CD delivered of Ubuntu 10.04 (Lucid). When I put the CD into my computer while running windows, the CD is not recognized, which seems strange to me. When I put the same CD into my work laptop (note that both computers are running XP), I can see the contents of the CD. Decide that it might not be an issue and restart the computer in the hope of booting from the CD. CD is never recognized and looking at the bootmenu, it has USB-cdRom at the top of the list.
More information: CPU is an Intel Pentium 4, 3.2Ghz. I don't believe it is a 64bit computer but I can't verify that. I mention this because I believe the CD I got is the 32bit version and that it should be sufficient but I figured I'd throw it out there in case someone else knew something.
View 2 Replies
View Related
Mar 23, 2011
Can I upgrade lucid lynx kernel from 2.6.32 to 2.6.38? If so, how do I do it from command line?
View 8 Replies
View Related
May 11, 2010
After my 8.04 debacle here:I basically gave up on trying to write an install guide for Hardy and Amanda. Others had done it better and with how muddled I was by the end of getting a working server, I wasn't sure I could repeat it.Now in Lucid, I've managed to get another working amanda server going, I'm fairly sure I can repeat it and but I question:Installation with 'apt-get install amanda-server' uses the user backup in the group backup.Installation of the ZWC client uses the user amandabackup. while thankfully ZWC has included reg keys:
HKEY_LOCAL_MACHINESOFTWAREmandaWC1.0Install BackupUserHKEY_LOCAL_MACHINESOFTWAREmandaWC1.0Install RecoveryUserto change the user on the client, this is messy, requires regedit (which normally is locked out by group policy), editing the service in service.msc and creation of a new user account named backup in addition to the installer's default on each client.The actual question is:1) Is there a reason for the use of backup:backup? (rather than amandabackup:disk or amandabackup:backup)
2) Is there any sort of flag that could be set, script to change the user within the repo atinstall time.Or generally an easier way of doing this than compiling each time I do an install.
View 1 Replies
View Related
Aug 20, 2010
I'm trying to add PPAs in my Kubuntu Lucid Lynx installation.
Code:
$ sudo add-apt-repository ppa:kubuntu-ppa/ppa
Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret-keyring /etc/apt/secring.gpg --trustdb-name /etc/apt/trustdb.gpg --keyring /etc/apt/trusted.gpg --primary-keyring /etc/apt/trusted.gpg --keyserver keyserver.ubuntu.com --recv
[code]....
But when I look in my sources.list, the PPA repository is not there. Nevertheless I SUSPECT I'm receiving it's updates.Is there a file that PPAs are being written to other than sources.list?Should I manually update sources.list in order to add this PPAs?
View 7 Replies
View Related
Aug 7, 2011
I installed lucid lynx over a year ago on a IBM A20m laptop. I've been happily using ubuntu up to now until yesterday when I installed Tor and Torbutton. When I rebooted, I got a blank screen after the IBM startup routine. Thinking that somehow the system got corrupted by my Tor installation, I decided to reinstall lucid lynx from the CD. Surprise! The install CD also gives a blank screen!
I hit a key to get the menu and and the three first three choices all result in the same blank screen:
* Try Ubuntu without installing
* Install Ubuntu
* Check disk for defects
To help debug this, I tried setting the F6 option nomodeset and I removed "quiet splash" from the boot options.
View 1 Replies
View Related
May 9, 2010
I installed Lucid Lynx this morning but received this error message after the restart. "An error occurred while mounting usbfs. Press S to skip mounting or M for manual reboot"
View 2 Replies
View Related
May 28, 2010
I was using the 9.10 version of Ubuntu, and everything was ok. So I decided to update to 10.04, by update manager, and it not works pretty well. So I decided to reinstall my ubuntu. In my PC I also have a instalation of Windows XP, my father and sister uses it. The installation went well, no problems, Lucid Lynx is working fine. But in the grub screen, if you choose Win XP, the CPU starts to whisthle continuously, and the only thing you can do is restart.
I have been reading about it, but do not find the exactly same problem. I have posted a thread in a portuguese forum (im from Brasil) and have no good responses. Sorry about the bad English, I dont have to much experience writing.
View 2 Replies
View Related
Jun 14, 2010
I've downloaded 10.04 desktop (twice) and server (once). The server install will boot fine, but the desktop install goes to a blank screen (and the monitor goes to sleep) after leaving the Live CD menu (Run from CD, Install, Check Files, Boot 1st HD, etc.).My first try at downloading the desktop CD was using BitTorrent, and appeared to go OK. Burned the .iso image, booted, and when I got the blank screen I suspected the Intel D101GGC motherboard using the Radeon Xpress 200 chipset had problemsI tried adding boot options (F6) such as vga=711 and xforcevesa and text. No joyOthers seemed to have gotten a successful install so I turned may attention to the CD, suspecting it was a bad download/burn, and downloaded 10.04 desktop again from mirror.pnl.gov/releases/. The two .iso images compared equal, so I used a different CD burner, with different media and got CDs which compare identical. Both CDs fail. Then I downloaded the server CD from PNL and it ran! I could select the "test CD" function, which ran in a text mode and said the server CD was OK. I started the install, and it went OK.
View 1 Replies
View Related
Jul 21, 2010
after upgrading to lucid lynx ubuntu doesn't boot with the new kernels 2.6.32-22-generic and 2.6.32-23-generic (also in recovery mode). But it's does boot with the previous 2.6.31-21-generic kernel. At the time i was hoping to wait it out, but a new kernel has come and the problem persisted. I've been trying to find a solution for this but somehow, amid lots of failed boot blank black screen threads, i didn't relate to any solution. The boot seems to go well until a pixelated logo appears (before the login screen), then goes to a blank black screen and there it stays stuck with no remedy. Looking into dmesg logs - albeit some differences between 2.6.31-21 and the newer 2.6.32-23 - the failed boot seems proper in both logs. In Xorg logs the differences are bigger but i cannot pinpoint a source for this problem.
View 2 Replies
View Related
Oct 20, 2010
I just purchased a new PC with the following specs:
Intel Core i5-760
ASUS P5P55D-E LX (S1156 mobo)
Sapphire HD 5750 Vapor-X 1GB Video Card
Samsung 1TB HDD
Corsair DDR3 PC1333 Gaming RAM - 2x2GB
DVD: Samsung DVD burner (internal)
I have made several trials to install Lucid Lynx but all failed:
1. Installed Windows 7 64-bit, hdd formatted as NTFS and ext3, then trying to install Lucid Lynx 32-bit : failed.
2. Installed Windows XP 32-bit, hdd formatted as FAT32, then trying to install Lucid Lynx 32-bit : failed.
3. Trying to install Lucid Lynx 32-bit with a clean hdd formatted as FAT32: failed.
In all the scenarios above, I have tried using Ubuntu installers on CD, DVD, or USB. on CD and DVD, the process always stopped after the Ubuntu logo screen, not even reached the langauage selection screen. On USB, with Legacy set to On in the BIOS, it did run and started by the option screen where we get to choose booting from the usb, or booting from hdd, or memory test, etc., but after choosing the booting from usb (and then hdd also) option, the process also stopped after the Ubuntu logo screen. I have experience dual booting Windows XP with Lucid Lynx on an older system, so I'm not completely new in this. I'd like to know what actually went wrong?
View 2 Replies
View Related
Nov 28, 2010
I got an error during the upgrade but chose to let the upgrade complete. Now my Firefox won't lauch. I tried uninstalling and reinstalling it from the Terminal and got the following:Quote:
rick@Desktop:~$ sudo apt-get install firefox
[sudo] password for rick:
Reading package lists... Done
[code]...
View 1 Replies
View Related
Apr 27, 2010
I've got a machine that I'd got 9.10 on, that I've now upgraded to Lucid Lynx - and I'm having the same problem with dual boot (or lack thereof) that I was having previously.
Rough scenario is:
(Original Vista machine had)
C: Windows Vista OS + Windows software, etc.: 500GB - single NTFS partition - SATA drive
D: General dumping ground for data. 500GB SATA drive. Was single NTFS partition, now shrunk to install Ubuntu.
So is now:
- NTFS partition (containing general rubbish)
- Ubuntu / partition
- Ubuntu swap partition
... and then 3 x 1TB SATA drives making up an (Intel ICH9R) FakeRaid RAID5 array - that Windows can happily 'see' and use, but I don't care about Ubuntu having access to it or even seeing it.
Lucid Lynx is installed to /dev/sde6 (IIRC) - but when I boot the machine just boots straight into Vista.
I've done what I can to try and get GRUB correctly installed - to the point that right now I probably have it splattered just about anywhere and everywhere.
So - now - the machine boots and simply presents me with "GRUB Hard Disk Error" and stops...
I can fix this by running the Vista repair, with a fixmbr etc. and putting the MBR back to 'normal' on the first boot disk (/dev/sdd in this case). The machine then just boots straight into Vista.
...or I can boot into Ubuntu (or Vista) by booting off a Super Grub Disk (CD) and selecting "Boot Linux" (or whatever it is) - and it correctly boots Lucid Lynx from /dev/sde6
Ideally I want a proper GRUB dual boot menu - but I just seem to be getting into more and more of a mess!
Bootlog below will show what sort of mess I'm in:
Code:
Boot Info Summary:
View 2 Replies
View Related
May 13, 2010
My Mythweb is asking for authentication but none username/password will work. It just prompts for authentication over and over again. I've found few configurations regarding authentication:
in /etc/apache2/httpd.conf I have following lines:
<Directory "/var/www/mythweb">
Options Indexes FollowSymLinks
AuthType Basic
AuthName "MythTV"
AuthUserFile /etc/apache2/httpd-passwords
require user user1 user2
[Code]...
none of the username/paswd pairs in Authuserfile are working? Can there be yet another file / configuraton somewhere? How do I know which one apache is using right now?
View 1 Replies
View Related
Jul 28, 2011
I have a lot of problems with the server and I want to reinstall the Centos in order to have a clean system. The problem is that I have access only via ssh console (with putty aplication)
View 1 Replies
View Related
Sep 19, 2010
I would like to know how to locate the IP address using:1) lynx2) web site: [URL]/tools/ip-address-lookup.aspFYI, I am able to detect my WAN IP address with the next command:WANIP=$(lynx -dump http://www.whatismyip.com|grep -i "Your IP Address Is"|awk '{print $5}'); echo $WANIP
View 5 Replies
View Related
May 14, 2010
I just did a distribution upgrade on my laptop from 9.1 to 10.04, and it went fine for the most part except this issue. After it boots up, I don't see any window titles/scrollbars/borders and on clicking the icon for "Show desktop" on the bottom left I see the following error message: "Your window manager does not support the show desktop button, or you are not running a window manager."
After googling a bit, I realized that gnome-wm is not starting automatically and so I have to manually start each time to see the windows working properly. Can somebody tell me if there is a way to make sure that gnome-wm starts automatically? I know I can put it in my .bashrc but I want to do it the correct way if possible. If not, I will have to go with that workaround
View 4 Replies
View Related
Jul 13, 2010
I deleted Ubuntu off of my laptop, because I was having some issues with it (I had lost some of my icons in Software Center, couldn't access my Yahoo Mail etc..). I deleted it using this method. I then went into my Windows Vista OS, and accessed Disk management via Control Panel.The partition Linux was previously on was Unallocated, and I had a D partition which was Windows recovery. I then shrunk my C (main Windows) partition down. I deleted the D partition.So now I have the C partition, and a large unallocated partition. I was planning on installing Ubuntu from CD onto this unallocated partition. I am using the same CD I had previously used to install Ubuntu. My roommate was also using the same CD today to install Ubuntu on his computer. I know the CD works.
So when I inserted the Ubuntu CD it loaded the first couple of screens. It got to the purple screen where the install text would normally have appeared and then continues to load.... but the "do you want to install? etc..." text did not come up. It then loaded to a black screen, loaded back to the purple screen, reads the disc, keeps loading... and loading... and nothing ever comes of it.I tried again, this time when the first purple screen comes up, I hit enter. I get the language select. I then get the options. I click install Ubuntu. it then starts loading... and loading... black screen, purple screen, black screen with text... but nothing comes of it.My windows is working fine. I don't know why it won't install
View 5 Replies
View Related
Aug 7, 2010
I recently re-installed lucid on a machine with two working DVD writers, one SATA, the other IDE. After the re-install, neither drive appears to be recognized. Putting an blank CD into either used to cause a pop-up that would ask me if I want to run k3b, but now it doesn't. If I use an external USB DVD writer, I do get that pop-up. Sadly my external USB DVD writer apparently writes unreadable disks, so it is not part of a long-term solution.
View 3 Replies
View Related
Jan 11, 2010
I was trying to backup everything, format/overwrite an partition to start with a fresh start after some annoying issues with my previous installation.
I had a perfectly fine working partition table and i chose to format partition
#1 (Ext4) partition (~50gb)
from the installation tool from the ubuntu live cd.
I had more partitions
#2 was ~5gbits swap
#3 was some unencrypted data(~20gb) (I think it was Ext3)
#4 was encrypted data (~150gb) (Ext4)
#5 unpartitioned data (~100gb)
So while doing this the installation failed somehow during the format of the disks, I tried testdisk but it couldn't locate the HDD nor any other program. When I look at my /dev it says this (from live cd):
root@ubuntu:/home/ubuntu# fdisk -l
root@ubuntu:/home/ubuntu#
Mount says:
root@ubuntu:/home/ubuntu# mount
aufs on / type aufs (rw)
none on /proc type proc (rw,noexec,nosuid,nodev)
none on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type tmpfs (rw,mode=0755)
/dev/sr0 on /cdrom type iso9660 (rw) .....
/dev/sdxx doesn't even exist and this also doesn't seem to work:
root@ubuntu:/dev# ls -al | grep h
drwxr-xr-x 2 root root 3240 2010-01-12 00:16 char
crw-rw---- 1 root root 10, 228 2010-01-12 00:14 hpet
crw-rw---- 1 root root 10, 56 2010-01-12 00:14 network_throughput
drwxrwxrwt 2 root root 140 2010-01-12 00:32 shm
crw-rw---- 1 root root 10, 231 2010-01-12 00:14 snapshot
I nearly have the idea there is no hdd in my pc while I am very sure it was here some hours ago. I didn't made it fall on something hard while running or something so all inside of the box should be just fine. I can't reach my keepassx file (stored inside the encrypted part) so I also can't log onto my workspace or anything, it is quite crippling currently.
View 7 Replies
View Related
May 9, 2011
I created an installation CD and even a usb stick of Ubuntu Lucid Lynx and Natty Narwhal and I keep having freezes during installation.
1. Set my BIOS to boot on CD/ usb stick
2. My computer starts to boot from CD/ usb stick
3. Ubuntu logo plus 5 dots screen shown
4. After that I am shown a snowy green screen with white lines running lengthwise and it freezes.
I already tried creating a new CD and usb stick after re-downloading the .iso installation file and creating the process of creating an installer over and over but still the same problem. Is it a hardware problem or my installer is the problem. I tried installing my old CD of Ubuntu Jaunty that I requested from Ubuntu a long time ago and I can install it without any problems. I am using Jaunty right now...........
View 3 Replies
View Related
Apr 30, 2010
This is basically the same install process for 9.10. I didn't run into any trouble after installing Skype on several different machines, this is of course assuming that your sound input/output worked before hand and isn't muted.[URL]s
View 9 Replies
View Related
