I got an error during the upgrade but chose to let the upgrade complete. Now my Firefox won't lauch. I tried uninstalling and reinstalling it from the Terminal and got the following:Quote:
rick@Desktop:~$ sudo apt-get install firefox
[sudo] password for rick:
Reading package lists... Done
[code]...
I installed lucid lynx over a year ago on a IBM A20m laptop. I've been happily using ubuntu up to now until yesterday when I installed Tor and Torbutton. When I rebooted, I got a blank screen after the IBM startup routine. Thinking that somehow the system got corrupted by my Tor installation, I decided to reinstall lucid lynx from the CD. Surprise! The install CD also gives a blank screen!
I hit a key to get the menu and and the three first three choices all result in the same blank screen:
* Try Ubuntu without installing
* Install Ubuntu
* Check disk for defects
To help debug this, I tried setting the F6 option nomodeset and I removed "quiet splash" from the boot options.
after upgrading to lucid lynx ubuntu doesn't boot with the new kernels 2.6.32-22-generic and 2.6.32-23-generic (also in recovery mode). But it's does boot with the previous 2.6.31-21-generic kernel. At the time i was hoping to wait it out, but a new kernel has come and the problem persisted. I've been trying to find a solution for this but somehow, amid lots of failed boot blank black screen threads, i didn't relate to any solution. The boot seems to go well until a pixelated logo appears (before the login screen), then goes to a blank black screen and there it stays stuck with no remedy. Looking into dmesg logs - albeit some differences between 2.6.31-21 and the newer 2.6.32-23 - the failed boot seems proper in both logs. In Xorg logs the differences are bigger but i cannot pinpoint a source for this problem.
View 2 Replies View RelatedI just did a distribution upgrade on my laptop from 9.1 to 10.04, and it went fine for the most part except this issue. After it boots up, I don't see any window titles/scrollbars/borders and on clicking the icon for "Show desktop" on the bottom left I see the following error message: "Your window manager does not support the show desktop button, or you are not running a window manager."
After googling a bit, I realized that gnome-wm is not starting automatically and so I have to manually start each time to see the windows working properly. Can somebody tell me if there is a way to make sure that gnome-wm starts automatically? I know I can put it in my .bashrc but I want to do it the correct way if possible. If not, I will have to go with that workaround
I just upgraded from Karmic to Lucid and my system will no longer boot. The upgrade completed without any error messages, but upon reboot, it hangs at the loading screen. I cannot start the system in recovery mode either. Same issue happens. To get to the command line, I've appended:
init=/bin/bash
to the kernel line in grub. I then remount so I have r/w access.
It appears to be an issue with udev. While the loading screen is "loading," udevd_work scrolls a bunch of stuff that's too fast for me to read (nor can I copy and paste it).
/var/log/udev isn't showing any recent errors, only messages from before the upgrade.
I have just upgraded my OS from ubuntu 9.10 to 10.04.Now I'm facing problem of not having write permissions to USB drives (Pen drives).I have to use terminal with sudo to copy , move files and unmount media.
View 4 Replies View RelatedProblem occurred after attempting to update firefox and configure evolution. Attempted to update firefox last night, it froze, attempted to open the system monitor to end the unresponsive process, and got a message saying the system was unable to support a new process because it couldn't fork. Did a forced reset, and the following now happens upon starting up. After selecting ubuntu (as it's a dual boot system with Windows XP) at the grub loader, blank screen, to this:
Code:
mount: mounting dev/disk/by-uuid/5b24d4b5-9b8d-4608-9387-0d92756dcdd8 on root
failed: invalid argument
mount: mounting /dev on /root/dev failed: no such file or directory
[code]....
It will not run recovery mode, and I have no bloody what it means by init=bootarg.
EDIT: Nevermind- I'm going to try the methods listed in [URL], and hope the gods of fsck smile upon my lowly hard drive.
I upgraded to Lucid a few days ago (from Karmic) and although everything went smoothly, I've been having this problem:Every now and then, when I'm on FireFox, the whole computer freezes and is unresponsive. The mouse doesn't work, I can't open the terminal, I can't do anything! My only option is to press the restart button on my laptop.I don't know if this is of any relevance, but I use UbuntuStudio, but have been using the proper Linux Kernel. I only selected the RealTime kernel if I'm working on audio editors, which I haven't done since updating to Lucid.y laptop is an HP pavilion zv5000. It has an ATI 9000/9100 graphics card, about 768 mp of ram, and a P4 3GHz processor.
View 3 Replies View RelatedI've just upgraded from 9.10 and everything is good, accept that netbeans will not load.
I get the netbeans 6.8 splash screen then nothing
I upgraded from Karmic to Lucid yesterday and today today I've noticed that I can no longer apt-get update through the terminal. I'm behind a corporate firewall, so up till now I've always exported the proxy address like so:
Code:
export http_proxy=http://user:password@address:port
This hasn't worked under Lucid. I did some searching and found that Lucid did away with
[code]....
I've got a generic USB keyboard (not wireless) that works perfectly on WinXP, the BIOS and the GRUB boot menu. As soon as Ubuntu 10.04 loads, however,he keyboard stops working. Tried different ports, still nothing. I haven't tested on previous versions of Ubuntu or other Linux distros. A PS/2 keyboard works great on Ubuntu except the one I have is broken, hence why I'm using this USB keyboard. Any ideas on how to fix this? It's the only thing holding me back from leaving Windows for good. lsusb:Quote:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]...
I've been installing and uninstalling POedit 1.4.2-5build0.1 Ubuntu 10.04 Lucid Lynx.POedit is installed but it loads for around 10 seconds and then just go away.I'm installing it using Synaptic
View 3 Replies View RelatedI was running a small LAMP setup on my homenetwork with Ubuntu 9.4. Every thing was working OK. I then upgraded to 10.04 and now my php does get executed. Apache is still working, but I suspect something in the config has changed, but I don't know what.When I try to load a .php file, the resultant web page is just blank, if I have a .html file with php code in it, the page is not rendered from the point where the php starts. I have checked /var/log/apache2/error.log and there is nothing in that file.
View 5 Replies View RelatedI have just installed Lucid Lynx but cannot get K9copy to work at all. It loads, but closes as soon as I try to open the dvd. Anyone else getting similar problems, or, more to the point, does anyone know how to fix it?
View 2 Replies View RelatedI upgraded to 10.04 on my Macbook and everything was working fine. Now, my keyboard isn't working at all. I didn't do any system tweaks or anything.
View 9 Replies View Relatedbeen using meerkat in VM and there are some nice touches in there so was thinking of upgrading my lynx to meerkat, didnt wanna do fresh install cos meerkat has some stuff removed from what i see that lynx didnt BUT big worry is by doing upgrade not fresh I will end up with somoething completely sha**ed and wont work at all.
View 1 Replies View RelatedI have tried out Lucid Lynx Beta 1 back in march. During the installation I was announced that support for bluetooth was dropped. I installed anyway, thinking it would be back in the Final Release. Meanwhile (between March and April) I reinstalled Karmic because I really needed the bluetooth. I can see in the upgrade that bluetooth still isn't available. What should I do about this? Is there a way to keep Lucid Lynx and bluetooth? Or will I have to stay on Karmic until the end of times?
View 5 Replies View RelatedBoth in 32 and 64 bit I cannot boot kernel-rt. Message displayed: mounting none on /dev failed: no such device. Then get login message in text console, gdm cannot start.
View 1 Replies View RelatedWhile leaving my laptop to install the upgrades, I hadn't noticed how the power cord had slipped loose. When I came back my computer must have shut off due to battery loss. When I booted up my computer again, I couldn't boot up Ubuntu under any of the kernels, -20,-19, etc. I get cryptic messages such as "unable to enumerate USB device on port 2," device not accepting messages," and "device descriptor read." i definitely intend to recover my data. I had been upgrading from 9.10 to the latest version of lucid lynx.
View 6 Replies View RelatedDecided to try out Ubuntu instead of automatically getting the next Windows OS.
I have a Dell Dimension E310 with on board video card (will be relevant soon, I think).
After trying making my own CD and not being able to at least run the LiveCD (thought it was my fault even thought the MD5 #'s matched correctly), I went to Shipit and got a CD delivered of Ubuntu 10.04 (Lucid). When I put the CD into my computer while running windows, the CD is not recognized, which seems strange to me. When I put the same CD into my work laptop (note that both computers are running XP), I can see the contents of the CD. Decide that it might not be an issue and restart the computer in the hope of booting from the CD. CD is never recognized and looking at the bootmenu, it has USB-cdRom at the top of the list.
More information: CPU is an Intel Pentium 4, 3.2Ghz. I don't believe it is a 64bit computer but I can't verify that. I mention this because I believe the CD I got is the 32bit version and that it should be sufficient but I figured I'd throw it out there in case someone else knew something.
I want to install Ubuntu Server distro. First i downloaded ubuntu-10.04.1-server-amd64.iso and "burned" it to my usb-pen using UltraIso software for windows. That booted from the usb, but just after punshing in the language etc it complains that it cant find the cdrom or something like that. then i try the [url], but that wont boot at all with this same iso mentioned above. and burn it to a darn CD. it boots, but somewhere during the process it stops and asks for the same cd that is actually in the drive already. there is a thread about this here: [url] I then wanted to find an easy iso that i could throw on my usb-pen and install the whole thing through ftp like i did in the old days with floppies. but man, i got lost in the documentation with no clear path on how to do it.
View 1 Replies View RelatedCan I upgrade lucid lynx kernel from 2.6.32 to 2.6.38? If so, how do I do it from command line?
View 8 Replies View RelatedAfter my 8.04 debacle here:I basically gave up on trying to write an install guide for Hardy and Amanda. Others had done it better and with how muddled I was by the end of getting a working server, I wasn't sure I could repeat it.Now in Lucid, I've managed to get another working amanda server going, I'm fairly sure I can repeat it and but I question:Installation with 'apt-get install amanda-server' uses the user backup in the group backup.Installation of the ZWC client uses the user amandabackup. while thankfully ZWC has included reg keys:
HKEY_LOCAL_MACHINESOFTWAREmandaWC1.0Install BackupUserHKEY_LOCAL_MACHINESOFTWAREmandaWC1.0Install RecoveryUserto change the user on the client, this is messy, requires regedit (which normally is locked out by group policy), editing the service in service.msc and creation of a new user account named backup in addition to the installer's default on each client.The actual question is:1) Is there a reason for the use of backup:backup? (rather than amandabackup:disk or amandabackup:backup)
2) Is there any sort of flag that could be set, script to change the user within the repo atinstall time.Or generally an easier way of doing this than compiling each time I do an install.
I'm trying to add PPAs in my Kubuntu Lucid Lynx installation.
Code:
$ sudo add-apt-repository ppa:kubuntu-ppa/ppa
Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret-keyring /etc/apt/secring.gpg --trustdb-name /etc/apt/trustdb.gpg --keyring /etc/apt/trusted.gpg --primary-keyring /etc/apt/trusted.gpg --keyserver keyserver.ubuntu.com --recv
[code]....
But when I look in my sources.list, the PPA repository is not there. Nevertheless I SUSPECT I'm receiving it's updates.Is there a file that PPAs are being written to other than sources.list?Should I manually update sources.list in order to add this PPAs?
I installed Lucid Lynx this morning but received this error message after the restart. "An error occurred while mounting usbfs. Press S to skip mounting or M for manual reboot"
View 2 Replies View RelatedI was using the 9.10 version of Ubuntu, and everything was ok. So I decided to update to 10.04, by update manager, and it not works pretty well. So I decided to reinstall my ubuntu. In my PC I also have a instalation of Windows XP, my father and sister uses it. The installation went well, no problems, Lucid Lynx is working fine. But in the grub screen, if you choose Win XP, the CPU starts to whisthle continuously, and the only thing you can do is restart.
I have been reading about it, but do not find the exactly same problem. I have posted a thread in a portuguese forum (im from Brasil) and have no good responses. Sorry about the bad English, I dont have to much experience writing.
I've downloaded 10.04 desktop (twice) and server (once). The server install will boot fine, but the desktop install goes to a blank screen (and the monitor goes to sleep) after leaving the Live CD menu (Run from CD, Install, Check Files, Boot 1st HD, etc.).My first try at downloading the desktop CD was using BitTorrent, and appeared to go OK. Burned the .iso image, booted, and when I got the blank screen I suspected the Intel D101GGC motherboard using the Radeon Xpress 200 chipset had problemsI tried adding boot options (F6) such as vga=711 and xforcevesa and text. No joyOthers seemed to have gotten a successful install so I turned may attention to the CD, suspecting it was a bad download/burn, and downloaded 10.04 desktop again from mirror.pnl.gov/releases/. The two .iso images compared equal, so I used a different CD burner, with different media and got CDs which compare identical. Both CDs fail. Then I downloaded the server CD from PNL and it ran! I could select the "test CD" function, which ran in a text mode and said the server CD was OK. I started the install, and it went OK.
View 1 Replies View RelatedI just purchased a new PC with the following specs:
Intel Core i5-760
ASUS P5P55D-E LX (S1156 mobo)
Sapphire HD 5750 Vapor-X 1GB Video Card
Samsung 1TB HDD
Corsair DDR3 PC1333 Gaming RAM - 2x2GB
DVD: Samsung DVD burner (internal)
I have made several trials to install Lucid Lynx but all failed:
1. Installed Windows 7 64-bit, hdd formatted as NTFS and ext3, then trying to install Lucid Lynx 32-bit : failed.
2. Installed Windows XP 32-bit, hdd formatted as FAT32, then trying to install Lucid Lynx 32-bit : failed.
3. Trying to install Lucid Lynx 32-bit with a clean hdd formatted as FAT32: failed.
In all the scenarios above, I have tried using Ubuntu installers on CD, DVD, or USB. on CD and DVD, the process always stopped after the Ubuntu logo screen, not even reached the langauage selection screen. On USB, with Legacy set to On in the BIOS, it did run and started by the option screen where we get to choose booting from the usb, or booting from hdd, or memory test, etc., but after choosing the booting from usb (and then hdd also) option, the process also stopped after the Ubuntu logo screen. I have experience dual booting Windows XP with Lucid Lynx on an older system, so I'm not completely new in this. I'd like to know what actually went wrong?
I've got a machine that I'd got 9.10 on, that I've now upgraded to Lucid Lynx - and I'm having the same problem with dual boot (or lack thereof) that I was having previously.
Rough scenario is:
(Original Vista machine had)
C: Windows Vista OS + Windows software, etc.: 500GB - single NTFS partition - SATA drive
D: General dumping ground for data. 500GB SATA drive. Was single NTFS partition, now shrunk to install Ubuntu.
So is now:
- NTFS partition (containing general rubbish)
- Ubuntu / partition
- Ubuntu swap partition
... and then 3 x 1TB SATA drives making up an (Intel ICH9R) FakeRaid RAID5 array - that Windows can happily 'see' and use, but I don't care about Ubuntu having access to it or even seeing it.
Lucid Lynx is installed to /dev/sde6 (IIRC) - but when I boot the machine just boots straight into Vista.
I've done what I can to try and get GRUB correctly installed - to the point that right now I probably have it splattered just about anywhere and everywhere.
So - now - the machine boots and simply presents me with "GRUB Hard Disk Error" and stops...
I can fix this by running the Vista repair, with a fixmbr etc. and putting the MBR back to 'normal' on the first boot disk (/dev/sdd in this case). The machine then just boots straight into Vista.
...or I can boot into Ubuntu (or Vista) by booting off a Super Grub Disk (CD) and selecting "Boot Linux" (or whatever it is) - and it correctly boots Lucid Lynx from /dev/sde6
Ideally I want a proper GRUB dual boot menu - but I just seem to be getting into more and more of a mess!
Bootlog below will show what sort of mess I'm in:
Code:
Boot Info Summary:
My Mythweb is asking for authentication but none username/password will work. It just prompts for authentication over and over again. I've found few configurations regarding authentication:
in /etc/apache2/httpd.conf I have following lines:
<Directory "/var/www/mythweb">
Options Indexes FollowSymLinks
AuthType Basic
AuthName "MythTV"
AuthUserFile /etc/apache2/httpd-passwords
require user user1 user2
[Code]...
none of the username/paswd pairs in Authuserfile are working? Can there be yet another file / configuraton somewhere? How do I know which one apache is using right now?