i have a netbook with ubuntu desktop 10.10 (gnome), i don't know what i've done, t got a message
"OAFIID:GNOME_FastUserSwitchApplet panel encountered a problem "
and i don't know how it was fixed, now it works good , but the panel doesn't start normally (quickly), i have to wait few minutes to get the menu bar and the other elements,
I forced a quick restart with 'sudo shutdown -f now' and when logged back in gnome-panel doesn't start at all. I can right-click on the desktop & run terminal from there, so I'm running web browser from terminal. I tried 'sudo killall gnome-panel' & got 'no process found' I tried doing a full restart, still the same.
I tried running gnome-panel from the terminal.
'gnome-panel' gives me my panel after a 4 or 5 second delay. If I exit the terminal or Ctrl-C I lose the panel again.
'sudo gnome-panel' gives me what appears to be the panel for the root user.
I installed avant-window-navigator and followed these instructions to remove gnome-panel from startup: URL...However I have since uninstalled AWN and now cannot get gnome-panel to load at startup.I think I have put my settings back where they should be -- looking at them in gconf-editor:
1. desktop > gnome > session, the required_components_list is [windowmanager,filemanager,panel]
2. desktop > gnome > session > required_components_list, the panel value is "gnome-panel"
Yet gnome-panel does not load at startup. Any ideas why?Clarification: I can get gnome-panel to load by listing it under Startup Applications, but I am curious why it won't load via the gconf settings.
After upgrading from 10.10 to 11.04, it appears gnome-panel won't start when I login in classic, classic with no compiz, or even failsafe/safe mode. What happens is the login will start, and I'll see an empty wallpaper with a cursor that switches between the hourglass circle spinner and a regular cursor.
If I hit alt+f2, the run dialog will appear, but immediately be killed (or something).
I am able to login with Unity as well as the recovery console. On the recovery console, when I try to launch the panel, I see this:
[blah blah blah]
b2b97000-b2ba8000 r-xp 00000000 08:05 2101405 /usr/lib/gio/modules/libgioremote-volume-monitor.sofish: Job 1, gnome-panel terminated by signal SIGABRT (Abort)
Since Unity doesn't work with focus-follows-mouse, but still tries to use focus-follows-mouse, I'm actually using IceWM to report this.
I am using Rhel5 and I'm new to linux so pardon me for sounding a bit green around the ears.Anyway..I got an error message a few weeks ago about how the start up script that displays icons on the far right of my start panel was malfunctioning and it was going to be deleted from the start-up. didn't really know what it really meant and I just clicked ok.wireless eth0 status icon as well as my amarok status icon are hidden on the start panel. How do I get it back/add that script back to the start-up
View 6 Replies View RelatedAfter upgrade to Ubuntu 10.04 I realized that Firefox doesn't start, it just shows "Firefox starting"on the taskbar for a second and then dissapear. New Gwibber software doesn't start either.I have separate /home partion and installed new version to the system partition marked it to be formatted first. Opera browser works perfectly fine.
View 1 Replies View RelatedWhen I restart, GRUB sometimes doesn't start. It just hangs at the flashing cursor before grub.
When I restart again, grub works fine. The flashing cursor shows at the top of the screen for a few seconds, and then there is one or more new lines, and then the grub screen.
This is on an HP Pavilion 640 which is otherwise very stable.
I have dell d630- 64bit version So i upgraded to the latest alpha and my system gets stuck at: as far as "Checking battery state" and hangs, i can login to the separate console and run startx but then no window manager is comming up so again, another ubuntu upgrade and another failure
View 2 Replies View RelatedRecently i upgraded my laptop from ubuntu 9.10 to 10.04 but alas! after the upgrade i don't get anything, just the 10.04 boot up screen and my cursor after some time. when i run it in recovery mode and tried to startx from there , it gave me a message " no protocol defined " now i can only access my system in failsafe x mod. code...
View 2 Replies View Relatedhow would i go about deleting my old kernel?i have my ubuntu machine partitioned the way gentoo would partition a drive with a seperate boot directory. my boot directory is only 200 megs so i can probably fit 4 kernels max into it and need to eject the old ones.
View 3 Replies View RelatedSo I am prompted in desktop for updates, but no information is given about the size of the packages involved. Sometimes, I don't like to wait too much for the dowload or to update packages which are too large.
Any settings dealing with that, so the individual size and the total per groups (security updates, etc) would be show without going in yum?
All this started when I decided to upgrade Ubuntu 9.10 to 10.04. Now Windows XP gives me a blank screen and doesnt run. I have tried a bunch of things but didnt help. I also clean installed Ubuntu 9.10 into a new partition and removed the deleted the other partition.
[Code]....
1. Windows XP on sda1 wont start from grub2 (version 1.97-beta4).
2. I can access the windows partition from Linux and see all the files.
3. When I boot using windows cd, and go to recovery mode it doesnt list Windows XP.
4. From windows Recovery mode when I try "diskpart" it says no partitions in c drive.
After upgrading Ubuntu to version 11, vmware-server-console stopped working - only gray window opens. After killing the process error message appears:
/usr/lib/vmware-server-console/bin/vmware-server-console: symbol lookup error: /usr/lib/i386-linux-gnu/libgio-2.0.so.0: undefined symbol: g_cclosure_marshal_VOID__VARIANT
I just installed Fedora 12 on my HP laptop. And everthing has gone smooth, and I decided to reboot my machine. And it rebooted and the Fedora Loading logo camep and after it finished, it went to a black screen with a "|" just flashing and it's stuck on that
View 8 Replies View RelatedI just downloaded the F11 x64 DVD iso, and I when I try to install it, after the media check screen, Anaconda starts it load, but it says "X failed to start, falling back to text mode" (or something like that).
The install goes through (in text mode), and all that gets installed is the basic environment.
My specs:
- AMD X2 Phenom II 550 Callisto
- 4gb DDR2 800 memory
- 1tb Samsung SATA / 100gb Western Digital SATA
- 2x XFX Geforce 9600gt 1gb
- ASRock K10N780SLIX3-WIFI motherboard
I've tried Ubuntu x86 on the same system, but I was having issues with it, so I decided to try FC11 instead.
I met problems when istall FC 10 on LG ED 500. I put the installation CD in the DVD drive, and start the computer, but it stopped very quickly. I didn't even see the progress bar of Fedora 10 coming out of the screen. What happend? I have checked the DVD drive under the windows system, and it's working.
View 1 Replies View RelatedI re-installed ubuntu 10.04 for prep I did a backup with Simple Backup Config after reinstalling i restored with Simple Backup restore some installed software software now doesn't start and after troubleshooting i think problem is file permissions but i'm not sure which permissions of which files to change and what they should be changed to. has anyone had experience with this and if so is it because it works or because its the right way to do it and it works funny thing.. i can't find any forum posts with info on Simple Backup!
View 1 Replies View Relatedinstalled vmm, then when i tried mounting i get this error message;Unable to open a connection to the libvirt management daemon.
View 3 Replies View RelatedI just did a distribution upgrade on my laptop from 9.1 to 10.04, and it went fine for the most part except this issue. After it boots up, I don't see any window titles/scrollbars/borders and on clicking the icon for "Show desktop" on the bottom left, I see the following error message:
"Your window manager does not support the show desktop button, or you are not running a window manager."
After googling a bit, I realized that gnome-wm is not starting automatically and so I have to manually start each time to see the windows working properly. Can somebody tell me if there is a way to make sure that gnome-wm starts automatically? I know I can put it in my .bashrc but I want to do it the correct way if possible. If not, I will have to go with that workaround.
I'm installing a file server on Lenny (Samba on RAID5, nothing exotic)
First, I installed on a basic SATA drive, to check everything else in the system was recognized correctly. Success.
Then, I added my 3405 Adaptec board, with a 3 drive RAID5, and reinstalled, still on the lone SATA disk.
Install runs ok, shows correctly the 3405 board, detects the logical drive alongside with the SATA drive. Smooth. I install Lenny on the SATA drive, planning to use the RAID5 for later partitioning and data storage. During install, the SATA disk is shown as SCSI-1 and the RAID5 disk as SCSI-2. Again, install completes correctly.
But on reboot and after selecting the default config, the system complains it can't find /dev/sda1!
If I remove the 3405 board, Lenny boots fine.
Is the presence of the Adaptec board and RAID5 drive changing the numbering of the disks, so that the SATA disk is no longer seen as /dev/sda1 ?
i installed debian cd 1 on a school's computer however, some administration tools are missing (like add/remove programs...) , i tried to install the full gnome but the installation doesn't start
Pmaison:/home/pmaison# aptitude install gnome Lecture des listes de paquets... Fait Construction de l'arbre des dİpendances Lecture des informations d'tat... Fait Lecture de l'information d'İtat İtendu nitialisation de l'tat des paquets... Fait Lecture des descriptions de tches... Fait Pas de version candidate trouve pour gnome....
I did a clean install of Ubuntu 11.04 64bit and the start up time is abnormally slow. If I start up the computer and don't press anything, the start up time is 30 minutes but it usually doesn't start up at all. It just boots into a purple screen, no splash, then it sits there and the computer doesn't have any loading lights flashing.
I had a similar problem with 10.10, but I assumed it would go away when I did a clean install of 11.04.
I can't get a read out of what's going wrong because when I press Esc it doesn't display anything, though weirdly it can sometimes get the start up process moving. I have also found that pressing enter really fast can sometimes help and something that seems completely oxymoronic, if I press the power button while it's starting up that can make it work, but nothing works every time.
I just did a distribution upgrade on my laptop from 9.1 to 10.04, and it went fine for the most part except this issue. After it boots up, I don't see any window titles/scrollbars/borders and on clicking the icon for "Show desktop" on the bottom left I see the following error message: "Your window manager does not support the show desktop button, or you are not running a window manager."
After googling a bit, I realized that gnome-wm is not starting automatically and so I have to manually start each time to see the windows working properly. Can somebody tell me if there is a way to make sure that gnome-wm starts automatically? I know I can put it in my .bashrc but I want to do it the correct way if possible. If not, I will have to go with that workaround
I'm configuring a new Centos 5.5 server in replacement of an old W2K server.The topology of our network is simple : one file/dhcp/dns relay server and workstations (PC's and some MAC's) plus network printers and scanners.All the workstations have dynamic IP addresses (easier because a lot of 'dynamic' changes : new persons with their own laptop, ...) and the server and printers/scanners have fixed IP addresses.I edited the dhcpd.conf (see here underneath), I have the file dhcpd.leases but it doesn't start !
DHCPD.CONF
ddns-update-style interim;
ignore client-updates;
[code].....
No Top Panel or Unity Panel after 11.04 Upgrade from 10.10 and it does not seem to be a common problem.
View 3 Replies View RelatedFor some strange reason, my gnome panel does not start up when I log in. I have created a thingy following some instructions that I found in another thread, on which I have to click twice every time I log in in order for the panel to appear. This seems to be related to configuration issue in my user account, because if I create a guest user account, the panel will appear normally. Now if I move my home folder to that account, the panel will not start.
I believe this has to do with the fact that I installed and then uninstalled compiz
I just installed Ubuntu 10.04 LTS 32Bit on my Dell Inspiron B130 Laptop, and it works great, way faster then windows XP which was pre-installed on the machine. Everything worked out of the box except for the Wireless but after some reading I was able to get it to work by plugging it in to the wired connection. but anyway the problem I'm having is that it seems like after a few days of use ubuntu starts to act up, things become out of place and not work. this even happens with Linux Mint also. By acting up I mean, Icons start to disappear in the panel, my wireless connection starts to stop working and the only way to keep it on is to either log off and try to log in using KDE instead of GNOME. or open terminal and do the command nm-appt or something someone on the chat told me to do to try and get my wireless icon working.
View 3 Replies View RelatedI'm using Ubuntu 10.04 LTS, and I'm trying to make my panel semi-transparent.
Unfortunately, the whole thing won't go transparent, only the blank areas without applets!
I know you can hack it in Compiz, but then everything goes transparent, including text and icons, which I don't want.
As you can see from the screenshot, I'm using the Radiance theme, but this also occurs with Ambience.
The clock applet "Clock 2.30.0" in my panel reads correctly on boot, and then never updates itself. When I go to its preferences, time setting is correct and continuously updating, but the display in my panel never changes. I can use "killall-gnomepanel" from terminal, and this rests everything, making the time display correctly. Furthermore, it updates itself afterward... but I'd like the dang thing to function correctly without resorting to that.
View 7 Replies View RelatedSay I set a background color or custom image to a panel. The notification icons (sound, net activity, clock, etc) and a few other icons (trash, desktop) appear to retain the default background. Looks kind of funky. Any way I can make these icons conform to my custom background?
View 3 Replies View Related