Ubuntu Installation :: On A Laptop - Configure The User Name?
Aug 7, 2011
I'd like to try to sell my old laptop. Although it's unlikely that somebody would like to buy and even more unlikely that this person would like to have Xubuntu on it I still want to do a clean install. The only question is how should I configure the user name. I mean if a buyer would like to keep Xubuntu but change the name how it is done? What do you have when you for example buying a Dell laptop with Ubuntu pre-installed?
View 3 Replies
ADVERTISEMENT
May 30, 2011
Take a physical user FRED. FRED is a linux user ( known by linux on his laptop ) FRED is a Samba user ( Known by samba on the samba pdc server ) When he logs locally (with username/password) on its standalone laptop (with no network), he is known as FRED:user. He access his data in /home/FRED/. When he logs through samba (with username/password) on the domain MY_DOM, he is known as MY_DOMFRED:MY_DOMdomain user. He access his data in /home/MY_DOM/FRED/. ) Is it possible that the human FRED has only one repository and have full access to its repository regardless of how it was connected. If yes, how to do it
2) If not, Is it possible that the human FRED has full access to /home/FRED/.............. and /home/MY_DOM/FRED/.
View 4 Replies
View Related
Jan 19, 2010
I have a Netgear wgps606 wireless print server with a 4 port switch. My question is how do I configure my ubuntu 9.1 laptop to vwork with this device.
View 6 Replies
View Related
Nov 13, 2010
in RHEL5 I want to configure wireless on my laptop but after many procedures followed none of them worked? how to do it? my laptop is HP520
View 4 Replies
View Related
Sep 6, 2010
I have slackware 13.1 installed on my laptop and use kde.I just bought a new external monitor 1680 X 1050. The laptop's monitor is 1280 X 800. From KDE i configured laptop's screen to be inactive and the external monitor at resolution 1680 X 1050. When i boot and enter KDE both monitors are activated, ican't understand their resolution. Then, just when i enter system configuration-monitor-monitor configuration the laptop's monitor automaticly turns off. Then i configure the external to 1680 X 1050 resolution. This happens every time i have to enter slackware. How to setup my xorg.conf file. You can see it below:
[Code]...
View 14 Replies
View Related
Mar 19, 2011
I found a tool made for Ubuntu called Xautoclick. I downloaded it and it is called "xautoclick-0.30.tar.gz" The installation notes say "tallatBe sure you have the proper development packages for your distribution installed (i.e. something like xserver-xorg-dev, gtk2-dev, et cetera). After that, run:
./configure make sudo make install" I have no clue what to do... I typed in "./configure" in the terminal and it says "bash: ./configure: No such file or directory?
View 3 Replies
View Related
Apr 9, 2010
I have a Toshiba laptop with a Intel X3100 graphics card and I'm using a second LCD display with it ( it works ok as an extension to my notebook's display ) My question: is it possible to configure the system so that one virtual desktop is my laptop lcd and another the external lcd ? Mine has a native resolution of 1280x800 and the external one 1280x1024 and I'm running Ubuntu 9.10
View 3 Replies
View Related
Oct 4, 2010
I am new in using Debian 5.0, my wireless doesn't work I make a search to know how to do it.
So I open "Terminal"
$ su (press enter)
I wrote the pwd
than when I wrote : # gedit/etc/apt/sources.list
I found this:
bash: gedit/etc/apt/sources.list: No such file or directory
I didn't know what to do, I proceed with: # apt-get install ipw3945 modules-$(uname-r) ipw3945d firmware-ip3945
bash: uname-r: command not found
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package ipw3945
View 9 Replies
View Related
Oct 30, 2010
I have a desktop and a laptop. I have Netgear WGR614v9 Wireless Router connected to my desktop. Since my Laptop is pretty old I also bought a Netger Wireless Adapter for the sme model. Now when I connect the Wireless Adapter I am unable to connect to Wi-fi. I am new to Linux, after googling I ran "lsusb" command and it showed Netgear Wireless adapter and its version. Also in GUI when I open File Browser it also shows the Adapter detected but I am unable to connet the same to my router. Also the blue light on the adapter is not glowing.
View 6 Replies
View Related
Jun 5, 2011
I want to install a program from this website http:[url].... and i download the option " hydra-6.3-src.tar.gz".i tried following the instructions on this page: https:[url].... but when i get to the ./configure step it says "bash: ./configure: No such file or directory"
View 9 Replies
View Related
Apr 29, 2011
I have a laptop lenovo T410s, using RHEL 5.6, 2.6.18-238. I'm trying use the external monitor as dual head using the system-config-display tool, but the generated xorg.conf fails:
Monitor autoprobe results
Monitor autoprobe failed.
And if I boot up with the monitor attached using the old single head valid xorg.conf, both screens stay blank. It works only with the external monitor cable disconnected. I don't know what else to try.
View 3 Replies
View Related
Apr 15, 2010
I have bluetooth enabled in a Windows desktop Machine, which is connected to internet.
I would like to connect to internet through bluetooth available in my laptop which is running on CentOS 5.3.
I referred to many tutorials in internet, still couldn't configure bluetooth.
View 1 Replies
View Related
May 9, 2010
Are there any tools (gui?) that make the xkb configuration easier? I know xev, but that sadly only displays the keycode and the character, but not the shortcuts like <LSGT> that xkb is using internally. I am stuck with the old problem of improperly mapped keys on my German Apple Aluminium Keyboard. My old workarounds that worked with Hardy and Karmic (modified "de" files in /usr/share/X11/xkb/symbols) do not work anymore in Lucid.
View 1 Replies
View Related
Apr 27, 2011
I am novice user of linux. I need to know how to configure firewall so my system cant be compromised...In windows my system was greatly compromised. keyloggers were installed without my approval and my desktop was taken on remote. What should I do so without my knowledge no software can be installed and i can close all ports and only open which ever port is required to open. What should i do so my desktop cant be taken on remote?How do I configure user rights ? So except me no one can install any software. I will have another general user id for internet surfing
View 3 Replies
View Related
May 26, 2010
I am a first time Linux user - though I've Unix and Windows experience. So though I can follow your most tech instructions, I'll need some hand-holding.
Need help getting my wireless network to work on my newly installed Oracle Linux on Dell laptop.
Not sure what wireless card is installed, or it's mac address (though I can boot into windows and get that info, I don't want to - it'll be kind of a let down if I can't fix it all thru Linux).
Install has detected a Broadcom wired card, but not the wireless. Funny thing is that it detected the Bluetooth.
View 3 Replies
View Related
Jul 1, 2011
This sounds like an old topic. I have an active user account in my system that I don't want it to be listed in GDM greeter. In the past (prior to Gnome 3), it can be achieved by configuring the "Exclude" option of the "greeter" section in the Custom.conf or by creating the user account with UID smaller than MinimalUID. But it seems the same old trick does not work for me in Gnome 3. I have tried the "Exclude" option with no effect at all. Using the UID approach only solves my problem partially, as it only exclude it in the GDM greeter during "switch user" but it still being shown in the list in the initial greeter after a cold boot.
Anyone know how to do this in Gnome 3?
View 4 Replies
View Related
May 12, 2011
How do you configure a Windows (preferably latest version) machine for a Linux power user, so that s/he can get most out of it?if all you have to add is a one-liner, your answer will be converted to a comment.
View 7 Replies
View Related
Oct 12, 2010
My startup script for Radius now works so it starts at boot time, the script is in /etc/init.d and looks like this
#!/bin/sh
/usr/local/sbin/radiusd -d /usr/local/var/log/radius/radacct/ -d /usr/local/etc/raddb/
After rebooting radius starts up automatically which is what I want.
However for security I dont want this to run under root, but I want to it run under a user and group called support
I have edited the radius.conf file and added
# for some finer-grained access controls.
#
user = support
group = support
[Code]....
View 5 Replies
View Related
Jan 20, 2010
I would like to be able to suspend to disk or Ram from the command line. I can do it with the package 'hibernate' which works well, but it needs to be run as root:
Code:
Do you know if there is any way that I can make this script run by normal users?
I am using a minimal version of 9.04 with openbox.
View 9 Replies
View Related
Jun 5, 2011
Hi ya
I thank you all for previously helping.
NOW, I'm looking for a non-Ubuntu, but still easy to use, download, and install via USB drive distro that's user-friendly.
Any help? It's for an Acer Aspire 7741Z-5371
It has a 64bit processor, but i generally use 32bit 0Ses. 250 GB hard drive, 3 GB DDR3 RAM.
I'm just sick of Ubuntu and want to branch out a bit, as a new user
View 14 Replies
View Related
Apr 30, 2010
I never considered I would want to remote access my laptop, or that I would be able to figure out how (I know....). In any case, my (only) username and password are not all that complicated - just there for deterence more than anything else (I have a barely functioning battery and a FDE hard drive, so if you're going to unplug and transport this baby, it'll shut off; my hard drive PW is solid).
In any case, I wanted to create another account that I could use to log into with SSH to be able to access files. I've started by disabling SSH login to my current user account (DenyUsers myusername). I know I could add a new user to my system with its own home directory and all, but I want it as least 'present' or invasive as possible. So in sum, is there a way to create an SSH only user, and if so, how?
I thought I would check here to get some pointers, to be sure I don't mess up my system!
View 4 Replies
View Related
Jun 18, 2010
I configured FTP server on Fedora 7.0 . I create different users with different password. I also create seprate directory for each FTP user. All are working . When I use filezilla for connecting that FTP site I can access all the directory on that server.
Now I want to configure that no any FTP user can access other FTP users directory or any other directory in server machine . What I do for this .
View 1 Replies
View Related
Sep 24, 2010
I am running Ubuntu 10.04 with current updates. I installed MS Office 2007 suite using WINE - the other users are not comfortable with OpenOffice. There are no issues with the installation, but it is in my user home path so it doesn't appear in the WINE config when I log in as another user. Should I start over with a generic user account and re-install Office/ WINE under that user?
View 2 Replies
View Related
Jul 6, 2011
Can some one help me to configure vsftpd with Virtual and System user
View 37 Replies
View Related
Dec 11, 2010
I want to share files over the web with only a few people and limiting them to certain folders. I have been doing a remote access (ssh) to my server to access it from a pc on the local network. I later found out the same program doing ssh (open_ssh) was also doing sftp, great I could do both with one system account. Problem I couldn't find away to configure another user to go over the web with limited folder access without messing up my user to access the pc. I tried ftps by using vsftpd, I couldn't get chroot set up correctly or even log in. So my question is what program and/or protocol should I use to do secure ftp over the web?
OS: Ubuntu 64bit 10.04
View 4 Replies
View Related
Apr 27, 2011
I am novice user of linux. I need to know how to configure firewall so my system cant be compromised...In windows my system was greatly compromised. keyloggers were installed without my approval and my desktop was taken on remote.What should I do so without my knowledge no software can be installed and i can close all ports and only open which ever port is required to open. What should i do so my desktop cant be taken on remote?How do I configure user rights? So only root and one admin can install softwares and no one else.
View 5 Replies
View Related
Sep 16, 2010
I am using Mandriva 8 as my local server, i want to configure sftp sever by which particular user can access particular directory of our local server by using ftp client, can anyone tell me how can i do it?
View 1 Replies
View Related
Jun 21, 2011
how to configure redhat squid in graphical user interface and uses of squid
View 2 Replies
View Related
Jun 20, 2010
I am running Fedora 13 - 64-bit variety and using KDE as the gui. No real issues asides from machine not exactly flying, but then this is a mere core 2 duo 1.6 with 2 gigs of ram, so not unexpected...
When I run top I see 3 users indicated - which worries me somewhat... I am the only user on this machine.
I come from a Debian / Ubuntu /Gentoo knowledge-base and this laptop is a fresh install, encrypted partitions, temp has own partition (encrypted too) and obviously the firewall is on, with ssh service turned off and ssh access removed in the firewall....
is this 3 users in top normal, or have i managed to be hacked in the 3 - 4 days since I started the install ? In all this time I have been sitting behind a router when on the net.
Am I looking at a fresh install, or are there valid reasons for the extra users?
I just ran "users" in terminal and I show up 3 times - I have only logged in once, through the GUI and no extra access routes
View 6 Replies
View Related
Oct 31, 2010
why the user created at installation time is a Custom User instead of an Administrator.
View 4 Replies
View Related