General :: How To Configure A Windows Machine For User
May 12, 2011
How do you configure a Windows (preferably latest version) machine for a Linux power user, so that s/he can get most out of it?if all you have to add is a one-liner, your answer will be converted to a comment.
View 7 Replies
ADVERTISEMENT
Dec 11, 2010
I've come across this rare issue, I have a friend that uses some software that is particularly slow in Windows 7, the best compatibility is in Windows XP, I told him to make a partition and have both OSes in the computer, at which he replied: "Could I have a different OS for each user?", it seemed like a good question to me, so is that possible?, suppose that I login and it boots me to Vista, then I loggout and Linus Torvalds comes and logins and boots him into Ubuntu, he gets bored and logs out, afterwards my friend comes and logs in, booting into XP, summarizing:
The operating system that will be loaded will depend on the user that logs in.
View 3 Replies
View Related
Jul 29, 2009
I successfully installed the virtual box on my fedora 8 system, and also created a virtual machine with windows xp OS, it works nicely, I try to configure the serial port of my virtual machine and try to configure the path for the port "screen shot are attached" it gives me the error message also the "screen shot are attached" for your review.Is kind of mistake is going on during the path setting, and how to set the path for configuring the serial port of my virtual machine so that I can use the hyper terminal tool of windows.
View 4 Replies
View Related
Jun 1, 2011
I have configured a FTP (VSFTPD) Server in RHEL 5.6, which resulted me a default directory /var/ftp/pub. Even i have cerated another Directory /var/ftp/accounts. Where Accounts Directory is owned by user x in my server. I have a issue with this, It prompts me User and Password while accessing this ftp 192.168.5.20 in Linux Servers. But while i am trying this through a windows machine by ftp://192.168.5.20 it gets directly accessed without prompting me any User and Password.
I need to have FTP environment same like windows. where it must prompt me user name and password, and i must be able to upload and download data from my windows clients.
View 1 Replies
View Related
Jan 10, 2010
I want to configure SSH key-based authentication and SSH password Authentication in same machine for different user .
View 1 Replies
View Related
Jul 1, 2010
i already put a windows 7 in domain, but now i cant login with samba user in windows 7 machine, i recive the error: problem with trust relationship.
View 1 Replies
View Related
Aug 3, 2010
I'm the Administrating the computers in my office. I want to monitor the user's activity. How can i remote login without distrubing the user's activity on his computer? Any software need to be installed? (I don't want to use Terminal server client).
View 5 Replies
View Related
Mar 16, 2011
How do i configure my linux machine to send mail. I have two server out of which one is configured to send mails. However The other is still not sending mails .I have installed sendmail rpms and modified
sendmail.mc file to include following parameter.
[Code]...
View 4 Replies
View Related
Mar 11, 2010
How to configure the KDE Konsole that when I press on a "new tab" button, the new shell would open on another machine (thorugh ssh), and not on the current one?
View 1 Replies
View Related
May 24, 2010
how can i configure a samba server?. im using a machine with fedora and a windowsXP machine.
View 7 Replies
View Related
May 9, 2010
How do I configure my machine to load specific modules at startup.
View 1 Replies
View Related
Mar 29, 2011
How can i configure an openCA and openOCSP server on a linux virtual machine?
View 1 Replies
View Related
Jun 2, 2011
My goal is to install Windows 7 on a virtual machine running on Ubuntu. The Lenovo machine came with Windows 7 installed, but did not come with a boot disk. What are my options? Should I ask Lenovo for a disk? Will I need to purchase Windows just for the virtual machine?
View 3 Replies
View Related
Jan 4, 2011
During set-up of a home server (running Kubuntu 10.04), I created an admin user for performing administrative tasks that may require an unmounted home. This user has a home directory on the root partition of the box. The machine has an internet-facing SSH server, and I have restricted the set of users that can connect via SSH, but I would like to restrict it further by making admin only accessible from my laptop (or perhaps only from the local 192.168.1.0/24 range). I currently have only an
[Code]....
View 2 Replies
View Related
Oct 12, 2010
My startup script for Radius now works so it starts at boot time, the script is in /etc/init.d and looks like this
#!/bin/sh
/usr/local/sbin/radiusd -d /usr/local/var/log/radius/radacct/ -d /usr/local/etc/raddb/
After rebooting radius starts up automatically which is what I want.
However for security I dont want this to run under root, but I want to it run under a user and group called support
I have edited the radius.conf file and added
# for some finer-grained access controls.
#
user = support
group = support
[Code]....
View 5 Replies
View Related
Jun 10, 2010
I have couple of users in one machine. I can access the /etc/passwd,/etc/shadow and /etc/group files in this box. I have another box. I want to create some user accounts in the second box by just looking in the passwd, shadow and group files in the first box. I would just copy over the corresponding lines into the corresponding for whichever accounts I want to create as new and also change the lines for which I want to update the account information. Is this possible and will also the passwords work fine? Please also let me know there is any good tool for automatically doing this kind of stuff. Both the boxes that I have are Ubuntu machines though one is running Ubuntu 8.04 and the other is 10.04.
View 5 Replies
View Related
Jun 18, 2010
I configured FTP server on Fedora 7.0 . I create different users with different password. I also create seprate directory for each FTP user. All are working . When I use filezilla for connecting that FTP site I can access all the directory on that server.
Now I want to configure that no any FTP user can access other FTP users directory or any other directory in server machine . What I do for this .
View 1 Replies
View Related
Sep 24, 2010
I am running Ubuntu 10.04 with current updates. I installed MS Office 2007 suite using WINE - the other users are not comfortable with OpenOffice. There are no issues with the installation, but it is in my user home path so it doesn't appear in the WINE config when I log in as another user. Should I start over with a generic user account and re-install Office/ WINE under that user?
View 2 Replies
View Related
Mar 3, 2010
In this article about Sun, the author talks about how using a Sun network meant that you could log onto any computer on a network and all of your personal tools and settings would be there. Is it possible to set up something like that with a Windows network? How about Linux?
View 2 Replies
View Related
Aug 1, 2010
How to give nfs share access to only particular user at client machine.
View 1 Replies
View Related
Jan 22, 2010
My application is installed on root of RH enterprise 5 and is run via user on the same machine. This need ssh without password from the user.
i do the following :
1. run ssh-keygen in .ssh directory of the user.
2. copy the id_rsa.pub as the authorized-keys in the root's .ssh directory
3 chmod 600 to the authorized_keys
4.restart the machine
5. login from the user and ssh SER ( SER is the entry in the /etc/hosts with the ip address of the machine)
6 It still prompt for the password
How can i ssh from the user to the machine without password.
View 3 Replies
View Related
Sep 21, 2010
I'm ssh'ed into a machine and logged in as a different user. Is it possible to open a few new windows that will still be ssh'ed into that same machine, still logged in as that user?
View 2 Replies
View Related
May 28, 2011
What I'm trying to do is to grant my regular user to locally mount partitions and shutdown the machine without a password. Here is what I've done to /etc/sudoers:
Code:
Host_Alias LOCAL = localhost
Cmnd_Alias SHUTDOWN = /sbin/shutdown
Cmnd_Alias MOUNT = /bin/mount, /bin/umount
<my_username> LOCAL=(root) NOPASSWD: SHUTDOWN, MOUNT
%wheel ALL=(ALL) ALL
My user is a member of wheel group and I want to type the password for each sudo command except for shutdown and mount. However I am asked for a password whenever I execute "sudo mount [...]" or "sudo shutdown [...]".
View 4 Replies
View Related
Jan 16, 2010
I was wondering if by installing a p2p client on a Linux machine (e.g.bittorrent, emule, limewire) it was possible to exchange file with users having a Windows machine.
View 5 Replies
View Related
Feb 13, 2011
I try to access my ubuntu machine via my Windows Machine (Samba Server on Ubuntu Machine). Anytime I try to access the machine it asks me for my password...I enter it but it says it is invalid....is there anyway to reset it? I have already tried to remove and purge everything Samba related and then tried reinstalling, but that still didn't do anything
View 2 Replies
View Related
Apr 16, 2011
I remember it being really easy to add a printer attached to another computer using Ubuntu, but I don't remember exactly what made it so easy. All I know is that now that I have switched to Kubuntu the process has become much harder because now I have to find out some special locations, numbers etc. for it to connect to the printer. It's connected to a Windows XP machine on the other side of the house.
It says alot about 'contacting the network administrator' if I am unsure about what to put in. But I am more or less the network administrator. how to find out what numbers to put in so that my Linux machine can connect and print to the Windows machine? Or maybe someone knows a few commands to share? I go to Applications > Settings > System settings, Printer configuration, New Printer, New Network printer, and then there are a few options but I don't know which one to choose. Windows Printer via Samba, I guess? Then in the box that says smb://[enter stuff here] I need to put in info but I don't know how to find that info.
View 5 Replies
View Related
Aug 28, 2010
I am trying to establish the easiest way to share a folder from an Ubuntu machine to a Windows machine.In the past I have added things to smb.conf and that has all worked fine but what I am trying to do is to figure out what the "new user" way of doing this is so that when I am helping other people I know I am getting them to do the simplest thing.I completely removed samba and reinstalled it so that I didn't have any configuration. Right clicked on a folder and selected "Sharing Options" ticked the "Share this folder box" gave it a name and a comment and ticked the other two boxes.
When I went to the windows laptop then it kept asking for a username/password and nothing worked.Back on the ubuntu machine I did sudo smbpasswd -a [username] and created a blank password. Now from the windows machine I can access the shared folder.Is the smbpasswd step still required? It's very confusing for a new user as there is no suggestion that anything other than right clicking on the folder and choosing the options you want would be required. Is it something to do with the fact that this is an ubuntu machine that has gradually been upgraded through versions and this problem wouldn't have been there from a new install?
View 3 Replies
View Related
Apr 9, 2010
I need to access a Windows Server 2000 machine using a Linux machine via KDE, but that will migrate to Gnome. The Linux user to connect to Windows machine, you should open an application 'XYZ' automatically, and only this, denying any unauthorized access. When you close the application 'XYZ' communications (RDP?) Should be terminated. Do I need a log of accesses and possible attempts to circumvent the system and access other application.
View 7 Replies
View Related
Jul 23, 2010
I want to make my machine to PXE boot windows from another machine having RHEL5.2. I know the procedure to PXE boot linux, but I want to know is it possible to PXE boot your client machine with windows XP.
View 1 Replies
View Related
Jul 6, 2010
I had run one script in unix machine and want to copy the results to a windows machineBoth the machines are on different networksIn linux machine trying to do the ftp to the windows machine its giving connection refused. How to chech whether ftp is running on that linux machine or not?Also tried scp and ssh , both are failing
View 6 Replies
View Related