Ubuntu Installation :: Making A Fedora Live USB?
Jun 15, 2010I have tried using the startup disk creater but it doesn't want to use the Fedora ISO.How would I go about this in terminal?
View 4 Replies
ADVERTISEMENT
Ubuntu :: Making Live USB From An Installation?
Apr 16, 2010Is there a way to make a live USB from an installation of UBUNTU
View 4 Replies View RelatedUbuntu / Apple :: Making A Live USB On Mac?
Aug 11, 2010I am writing in order to find information on making a Live USB with Ubuntu with a Mac.
I have a laptop that Im going to install Ubuntu but I cannot use it to make the Live USB for various reasons.
In the past, I used on my laptop the "Unetbootin" software to make a Ubuntu Live USB and it did worked well. Now, I just realized that Unetbootin can only be used with Linux or Windows so I would really appreciate if someone could provide information and maybe name a software that could be useful to me to do this task.
Debian :: Making Live USB Squeeze Persistent
Nov 8, 2010I need to have a persistent Debian install on a thumbdrive to run a computer that is currently diskless (dead hard drive). So far I've managed to get it to boot Squeeze live beta by setting up the thumbdrive with UNetBootin, but it's not persistent. I found this, but step 6 is a mystery to me, as I can find no such command or package.
View 12 Replies View RelatedGeneral :: Making A Live CD Bootable From Compact Flash (CF)?
Jun 16, 2011Making a live CD using tools such as livecd-creator seems like a good solution to create a bootable read-only image to install on Compact Flash. My goal is to prevent failure due to write cycle limits of Compact Flash memory. A secondary goal is to have the live CD available for troubleshooting. However, Usenet postings indicate challenges in making the live CD image on CF bootable. Has anyone succeeded in doing this?
View 3 Replies View RelatedFedora Installation :: 11 Installer Fails When Making A Partition?
Jun 12, 2009When using the manual partitioner on the fedora 11 installer on the live cd, both for 64 bit and 32 bit, it will not allow me to create a new partition. I understand that I have four primary partitions and it cannot have more than that, so I tried deleting one of the partitions, then creating the new ext4 partition for F11. It still fails and gives me the same bugsee attachment)
how to read this, especially since there is so much there. I see at the top it says that there are 4 primary partitions, could it possibly still be seeing 4 primary partitions when trying to create the new one, even though I am deleting one of them? Other than this, I truly have no idea what else I can do.
EDIT: Attachment wont load up for some reason, here is some of the error file:
anaconda 11.5.0.59-1.fc11 exception report
Traceback (most recent call first):
File "/usr/lib64/python2.6/site-packages/parted/disk.py", line 183, in addPartition
constraint.getPedConstraint())
[Code]....
Fedora Installation :: VirtualBox 13 Guest: Live CD Installation Failure
Aug 3, 2010Running VirtualBox 3.2.6 under some host OS (should be irrelevant which one, right?), I created a machine, intending to install Fedora 13 on it. Got the Fedora 13 Live CD iso image, and an 8.6 GB virtual hard drive, completely blank. I set the machine to boot off the Live CD image. The Live CD boots nicely and I get to its desktop. I open "Install to Hard Drive"...and nothing happens. No error message, zip, nada. Inspection of the system shows a series of odd file systems, but I have no clue what they are for and whether they're usable or not.
The sticky [URL] mentions that the blank virtual hard disk should be partitioned and formatted beforehand...So I did, using the Live CD's Disk Utility (Applications: System Tools: Disk Utility). Although the sticky states the small /boot partition should be ext2 or ext3, the Live CD installer proposes to reformat it as ext4. Shouldn't we have formatted it as ext4 right away, then? Also, the installer set the /boot partition's size to 524 MB, not 200 MB as recommended by the sticky.
OBSERVATION: This was not easy because VirtualBox sets the display to 800x600 at most, and the Disk Utility spills beyond those confines WITHOUT PROVIDING SLIDERS. It was sheer luck that the required buttons (create partition, format partition) were barely reachable (at the bottom edge of the screen). This is a serious problem, because increasing the VirtualBox display size can only be done *after* installation (see for instance[URL] - since this guest addition requires rebooting the guest OS, it probably won't stick to the Live CD).
Once those two partitions are prepared and the virtual machine rebooted, "Install to Hard Drive" works as expected.
OBSERVATION: It is absolutely inexcusable that the Live CD installer (Anaconda?) does not propose to do this partitioning and formatting for the user. It is even more inexcusable that it should fail without giving any feedback whatsoever to the user.
Aside: VirtualBox's guest additions does not work correctly (for 3.2.6 anyway). The Devices: Install Guest Additions menu merely mounts a CD image VBOXADDITIONS_3.2.6_63112) without any feedback (expected feedback because the menu ends with an ellipsis). The CD, once opened, has an Open Autorun Prompt button...which fails to do anything. Manually running autorun.sh also fails. I had to manually invoke VBoxLinuxAdditions-x86.run from a terminal to get anywhere. Even then I was unable to go higher than 1024x768.
Fedora Installation :: Live Installation Hangs Up At Initial Login?
Dec 2, 2010I downloaded the .ISO for Fedora Core 14 Live, with the intention of installing it to my HDD.
I burn the .ISO with no reported problems.
I boot to the installation CD and can get to the point where it asks me to Login (a timer is also going down for Automated Login).
Once I click "Login", nothing else ever happens.
I can hear the disc spinning in the drive and it's trying to load something, but it never does.
I thought that maybe my older (2003) laptop might just be slow, so I allowed it to do whatever it seemed to be doing overnight while I slept.
Well, I woke up this morning and it was still doing the same exact thing with no results.
---------- Post added at 05:54 PM ---------- Previous post was at 05:51 PM ----------
Oh, and I intend to dual-boot. I have already made a partition using Norton Partition Magic. It's NTFS filesystem for now, but I figured the Fedora Installation would give me an option to use that partition anyway - NTFS or not (meaning, it would wipe the NTFS file system and use whatever it is that Fedora Core uses). Am I mistaken in assuming this?
Fedora :: Black Screen Of Words Instead Of Fedora Live Boot During Installation
Jun 1, 2010When i boot the fedora image from a dvd i'm not being taken to the fedora live system screen, instead i see a bunch a words on a black screen (looks like DOS)...am i having compatibility issues or what? ive tried 32bit, 64bit versions as well as different desktops. does anyone have any ideas? my laptop is brand new: toshiba e205 running windows 7 ultimate..
View 2 Replies View RelatedFedora Installation :: 15: Impossible To Start Live Usb Installation?
May 24, 2011Downloaded few minutes ago Fedora 15 live x64 and used Fedora live usb creator to make my usb drive bootable.Once configured correctly my bios Syslinux starts but it hangs on the startup message
View 5 Replies View RelatedUbuntu Installation :: Can't Get A Vista Box To Recognize Live CD Or Live USB
Sep 8, 2010I've done a good few ubuntu installations for friends and colleagues and now my Dad wants in on the action. His PC is more than capable of running ubuntu 32 bit BUT I've hit a brick wall I've never come across before. I've burnt a CD image of the 10.04 iso from [URL] on my ubuntu box and for some reason, his PC just won't boot from it. If I select the option to manually select the boot source, all I see is the hardware monitor telling me things like CPU temperature. As for the Live USB - nothing whatsoever. Is it possible that I've managed to corrupt the iso file somehow?
View 3 Replies View RelatedUbuntu Installation :: 11.04 Live CD And Live Stick Not Working
Apr 28, 2011Live CD: I dowloaded the ISO, burned it to CD, booted from this CD. It starts to load and I can see the purple background with the loading icons. Everything seems normal. But instead of ending up with the login screen, it ends up with a screen that says 'Please remove all bootup media and hit ENTER' or something like this. So I hit enter and then it shuts off my computer. That's it.
Live Stick: So I tried another option and created a stick with 'usb-creator.exe' that is on the CD. Then I start from that stick, but all I end up is a line of 'Syslinux bla bla copyright 20xx-2011'. That's it. Then it does nothing anymore. The cursor is blinking, but no prompt or whatsoever and keyboard input doesn't do anything.
Now something weird: When I insert Live CD and Live Stick at the same time and then boot my computer, then it boots into Ubuntu. Obviously it loads the first parts from CD and then the rest from stick. Because when I'm then in Ubuntu and try to format the stick, it says it can't do so, because there's system files from that stick in use.
Fedora Installation :: Can't Run 10 Live CD
Mar 13, 2009Using live CD to check out Fedora10 on WindowsVista, IntelPentiumDual E2180, NTFS. Used Power2Go (default program) to burn ISO to CD. Shouldn't be the problem as I used it to download Fedora6 and those work fine. Downloaded and burned twice in case problem was faulty CD. Boot hangs up after initial screen indicates VMlinuz and image are loading, and graphic progress bar runs through. I get blank screen with blinking cursor, I can enter text all I want to. but no response to any commands. When I exit, shut down screen displays messages that look like I was totally running a linux system.
P.S. Found solution in other forum, press esc during progress bar load, now boot hangs up after loading cups.Going to check out boot edit options on wiki.
Fedora Installation :: Live CD Won't Run.
Jun 17, 2009I've been trying to install Fedora 11 all afternoon and have given up. The machine that I am installing on was running Fedora 10 with no problems whatsoever. I tried to install using the regular i386 DVD and it went partially through the install and crashed. I then cleared the hard drive and left two partitions on it (two ext3's). Still no go. Then I reformatted the hard drive, cleared the MBR and turned the machine into a DOS machine. Fedora 11 still wouldn't install.
The Live CD won't run. It errors out with a nouveau error. I saw the sticky concerning that issue. I still maintain that a system which supports nVidia in version 10 should support it in version 11 especially when it's on the list of supported devices (it's a GeForce 3.) I realize that a product can't support hardware indefinitely, but the device I have is on the list, so it should support it.As I type this message, Fedora 10 is installing without a problem. Fortunately, I was smart enough to backup my entire hard drive before starting this fiasco, so I'll be fine when I restore. No harm, no foul I guess.Very disappointing from a distro that I really, really love and want to maintain. I would have thought that the systems people would have put a better effort into the installation program.
Fedora Installation :: No Screen From Live-CD 10?
Jan 18, 2009Got NVidia GeForce 6200 TurboCache videocard. The free nv driver does not work with this card. Tried to get a screen with boot param: xdriver=vesa. Does not work: gives a black or blue screen too. start the live cd with vesa?
View 14 Replies View RelatedFedora Installation :: Cannot Install From Live CD
Jul 8, 2009I try to install by clicking "Install to Hard Drive" icon on the desktop, but it's not responding. And then i try '/usr/bin/liveinst' and i got the following error :
Code:
umount: /media/*: not found
07:27:29 Starting graphical installation...
Traceback (most recent call last):
File "/usr/sbin/anaconda", line 876, in <module>
[Code]....
Fedora Installation :: Can't Boot 11 Live CD
Jul 30, 2009I already know what the problem is, which is that I have an AGP Nvidia graphic card. When I try to boot the live cd it freezes. I've done some research and I've already tried using "nouveau.noagp=1" as a Boot Option from the live cd. But it says unknown boot option ignoring. And it still fails to boot up. Im anxious to begin using Fedora.
When it is trying to boot...it also says IO APIC resources could not be allocated.
Fedora Installation :: 11 Live On Usb-key Won't Install?
Sep 11, 2009This usb-memory-stick loaded wtih fedora11 and 4GB space for persistence runs nicely
When I click install icon and choose "shrink other partitions" or "use free space for installing", it aborts.I've tried installing on C hard drive and on 300GB-usb-disk with lots of free space; still won't work
Installation :: Fedora Won't Load Live CDs / Why Is So?
Oct 2, 2009Why does Fedora not recognize any of my live cds?
View 4 Replies View RelatedFedora Installation :: 12 - KDE - Gnome CD Live
Nov 27, 2009I have a problem when I power on my laptop (EliteBook 8530p) with fedora core 12 live cd in my optical drive. It simply will not start. The two numlock and capslock leds are flashing regularly and the screen is either blank, or it just freezes at the main menu (from which I can enter bios, etc). A HP assistant suggested that I should update my bios, but it's the same. I have also tried to install Mandriva 2010, which the laptop reads and boots up to a certain point when the screen goes blank, with the exception of a scroll flickering at the upper-left corner of the screen. Windows 7, FC 11, Ubuntu have been working till now, so I am inclined to believe that there's no problem with those particular cds (especially given the fact that I have written 3 or 4 with each linux image - fedora and mandriva).
View 1 Replies View RelatedFedora Installation :: Cannot Boot Live Cd
Jun 2, 2010I get it to boot to the loading screen and it gets to what looks like 99% loaded and it just sticks, i have tried multiple downloads, different cds and did "verify and boot" just to be sure and it just sticks and does nothing?
Just read up that it's an issue for a lot of others as well, so i'm downloading the dvd to do a straight install from
Fedora Installation :: Booting F14 From Live USB ?
Nov 10, 2010This is my first attempt at using Fedora (the only other distro i've used is Ubuntu), and I'm having trouble booting from a USB device created using the LiveUSB Creator utility, containing the Fedora-14-i686-Live-Desktop disc image. After selecting my USB device from the startup menu, I see a black screen with the following information:
Code:
With a blinking cursor. I cannot enter any input, but my keyboard has lights on as normal, so I assume it's working.
The following is a list of my hardware:
Processor: Intel Core2 Duo E6750
Motherboard: MSI nForce 650i P6N SLI-FI
Graphics: nVidia GeForce GT 240
HDD: Western Digital Raptor 150 GB
USB: Memorex Mini TravelDrive 2GB
I am trying to create a dual-boot system, and currently have Windows 7 Ultimate 32-bit installed.
Installation :: Can't Install Fedora On Pc From Live Cd / Fix It?
Nov 12, 2010I cant install fedora on my pc from live cd because my hard disk has many bad sectors anyone knows how to fix this?
View 14 Replies View RelatedFedora Installation :: 14 Live USB Is Frozen
Dec 11, 2010This is the error message I get after following all the proper steps to setting up a live USB and trying to install it.
[URL]
Obviously pressing enter doesnt do anything. My hardware is a Dell Inspiron 1420 Core 2 Duo with windows 7, I have an Nvidia video card and I used the LiveUSB Creator from [URL]
Fedora Installation :: Non-live F15 Iso Be Downloaded?
Aug 27, 2011Where can a non-live Fedora 15 iso be downloaded?
View 1 Replies View RelatedFedora Installation :: Cannot Boot F15 Live USB?
Sep 1, 2011I'm trying to install using live USB stick. The F15 live CD was downloaded and copied to the USB stick via liveusb-creator. The target machine has Award BIOS v6.00PG, I set the first boot device to USB-HDD. When I tried to boot it from the machine, I get the following error:
SYSLINUX 4.02 2010-07-21 CHS Copyright (C) 1994-2010 H. Peter Anvin et al
ERROR: No configuration file found
No DEFAULT or UI configuration directive found!
[code].....
Fedora Installation :: Making A Kernel Patch Work With F11 Kernel?
Jun 12, 2009there is an issue with the way the Linux Kernel addresses memory by default and the graphic drivers for my Asus G1Sn. I have a patch that I had compiled against a custom kernel for 2.6.27.xx how ever it does not work with the latest kernel in Fedora 11. It is beyond me to rewrite the patch to work with a different kernel.
View 1 Replies View RelatedFedora Installation :: Can't Install 10 Live CD On A Sun W2100z
Feb 16, 2009My Sun w2100z isn't letting me install F10-x86_64-Live CD.
I get the following error whenever I try to boot from the cd. It loops forever...
Any suggestions other then using the full Fedora 10 DVD/CD Media?
Fedora Installation :: If Installing From The Live CD - Must Have At Least Two Partitions Available ?
Jun 10, 2009Due to a combination of factors, if installing from the Live CD, you must have at least two partitions available. One will be a small (around 200 MB) /boot partition. The / (root filesystem) partition must be formatted as ext4 while the /boot partition must be formatted as ext2 or ext3.
The normal installation CD set and DVDs don't have this issue.
If you choose to install the Live CD and don't follow this scheme (you can, of course, have additional partitions besides /boot and /), the LiveCD won't install.
Fedora Installation :: Obtain F11 Live-Cd Or The 1 To 6 *.iso Images
Jun 17, 2009Whats the easyest way to obtain F11 Live-Cd or the 1 to 6 *.iso images.
View 7 Replies View Related