I have created live persistent usb-hdd (fat32) image, put into USB stick, but now I should create persistent live-rw partition. How this persistent partition should be formatted? Should I format with ext2, or fat32?
View 1 RepliesDebian 5.0I need to format an USB pen drive as DOS FAT32 but I can't find;
mkfs
mkfs.vfat
mkdosfs
I'm not that new in Linux I've been using for years since 2010 mostly, and formatted a number of flash drives with allegedly fat32 fs however, this time I need to be sure I'm formatting it as fat32 for experimental reasons and I can't seen to find a mkfs.fat32, both vfat and fat are fat16 and I don't know what msdos does...
View 4 Replies View RelatedI'm installing a new SSD this upcoming weekend. My thought was to go easy on it so it lasts longer by putting my swap files on a mechanical drive instead of the SSD. I don't - however - want to waste space for swap files. It would be nice if I could use the same 6GB FAT32 partition for swap files for both Windows 7 and Ubuntu. Is this possible? It might not even be necessary though, I have enough RAM that I rarely use the swap file at all (I've even considered going without swap all together), so it probably won't pose a huge load to the drive.
View 9 Replies View RelatedI want to customise an amnesic Debian environment (like Kali Live CD) with everything (Users, background, icons, etc.) set up to work the way I need. This OS should be inside a memory stick, and, most important, it has to have an encrypted partition I can mount and unmount whenever I want to save persistent data.
View 5 Replies View RelatedI have Lenny installed. How to create, using live-helper customized Live USB with a persistent /home partition on this USB stick, to save changes between boots?
View 6 Replies View RelatedI purchased a new HD and my goal is to have a Windows partition, an Ubuntu partition, (a swap partition of course), and large fat32 partition for storing data to be used on both the Windows and the Ubuntu side.
I am installing from USB and do not yet have a copy of Windows to install. I keep getting an error saying that the attempt to mount vfat failed.
Am trying to format my SD card and creat a FAT32 partition for booting
after following procedure i was stuck with the below command
Command (m for help): [t]
Selected partition 1
Hex code (type L to list codes): [c]
Changed system type of partition 1 to c (W95 FAT32 (LBA))
i don't have the [c] option or any "W95 FAT32 (LBA)"
I have win 7 installed on a primary partition along with two other primary partitions containing a recovery partition and system files partitions. (don't know exactly what the latter is for.) I made a defrag and resized the win partition to make some free space for a primary ubuntu partition.I then inserted the 10.10 live disc and created a fat32 shared partition, a root (/), a /home Nd a swap in the advanced gparted menu, BUT every time I try to initiate the installation I get an error message saying that installer couldn't create the fat32.
View 4 Replies View RelatedI formatted 56 GBs of my hard disk space into fat32 and it seems that 27 gbs of it is used! Though direct checking from the volume itself shows nothing like this, gparted still insists 27 gbs are used.
View 4 Replies View RelatedI converted one of my old iPod touches into a external harddrive, and i wouldnt mind a small tuorial on how to format my Ipod(USB) to FAT32? I'm on a netbook, and i want to delete Fedora and install BAckTrack instead. and without a CD/DVD drive or really much free money, i gotta use my iPod to do this.
View 8 Replies View RelatedI have already set up, with disc partitioning software (Acronis) , a ext2 partition and a swap space. I have two hard disc drives arranged in a raid 0.
When I try the Debian network install, I am asked to create a partition. The only option that I am given is to partition the whole disc. I most certainly do not want to do this because of all of the information and programs that I have on the other partitions.
I remember from the past that we used to use "Fdisk" to manually partition drives. I was not able to invoke it.
So, the basic question is, how do I direct the install to a partition that is already formatted?
i have instaled ubuntu 11.04 wubi on my pc with windows 7. i installed and everything was going ok i navigate on ubuntu already. but the problems star here i went on my ubuntu to the partition section and i format my windows partion to be the home partion and changed the nfts to ext, i did the upgrades but i forgot that theyr running yet and i restart my computer when it boot again it gaves me an error:
try (0,0) : nfts5 : wubildr
try (0,1) : ext2 :
and the windows7 says that i have to instal again. so i went to another pc and i made a cd boot and a pen boot. i burned the iso (downloaded from the ubuntu oficial site the 11.04 32 bit version) image to the cd and pen drive prperly, i adjust my boot options to star from usb or cd rom and nothing im struck.
I had an Ubuntu desktop 9.04. While I wanted to format my second hard drive with gparted, I have selected my system HD () with all my datas (/home, ...).In fact, my error is I have selected to rebuild my partition table and now I have lost all partitions . I would like to know how to restore my datas.
View 4 Replies View Relatedi am not able to mount a pen drive (which is formatted in ext2 format) with directory permission drwxrwxrwx and file permission as -rw-rw-rw.
View 3 Replies View RelatedThere is no obvious format command when I right-click on the drive.
View 2 Replies View RelatedI want to install debian 6.0 on not-bootable debian 5, with lvm usage. Is any way to store "home" partition unformatted during standart installation process( I want to store information on "home" partition)?
View 2 Replies View RelatedOn my Linux system, I want to create a symbolic link to a folder on my Windows 7 partition formatted FAT32. I use:
sudo ln -s /media/OS/Users/dennis/AppData/Roaming/.minecraft ~/.minecraft
However, I end up with a file in my home directory called .minecraft and when I try to access it, I receive:
bash: CD: .minecraft: Too many levels of symbolic links
is there a way to make the symbolic link to the FAT32 folder?
using suse 11.3 and kde 4.4.4 on the mounted fat32 partition I cannot change icons partition is mounted in fstab in this way:/dev/sda8/ /dati vfat user, users, gid=users, umask=0002, utf8=true, 0, 0.I can create files folders modify, move and save them on the partition but if I try to change the icon (in dolphin right click>properties>click on icon) of the /eros folder (or any other folder or link) system gives me
this error:impossibile salvare le proprieta' , non hai accesso sufficiente per scrivere su /dati/eros/.directory tha in english is something like this: impossoble save properties, you havent enough permission access to write on /dati/eros/.directory this happen also as superuser I remember that with suse 11.0 or 10.3 I was able to change icons on fat32 partitions, now with 11.3 I cannot, there ought to be a way to do what I did with the previous version with this 11.3 brand new ad more advanced version shouldn't it?
I was wondering if it can be possible to boot debian from micro sd card and have it persistent. I have checked the bios of my laptop and there are options to boot from USB and HDD (and from floppy, cd, network and hard disk), but not from sd card. Would it be a problem or could there be workarounds. That is of course if the whole thing is a good idea at all.
I have already booted the laptop from USB, but I would like to use it for everyday work and USB sticking out is bound to get snapped off. Sd card on the other hand would go inside in the slot. The hard disk is dead and is a bit expensive to replace (and unnecessary in respect of the volume, I only need a couple of gb for work)
So i installed debian squeeze in virtualbox with xfce and i thought that it was persistent. when i powered down the virtual machine and started it up again later I only had the option of installing it again. Do i use save state to keep it in the installed stage? would i have to do that each time i made a change? i want to make sure so that i don't keep having to re install it.
View 7 Replies View Relatedi TOTALLY ****ed up my windows bootmgr, and, in some way, the linux partition too. I'd like to format the windows partition, but as all my info stays intact I'd like to conserve it that way. The only way I can think of, is to make a new ext2 partition on the same HDD y have windows ( I only have one HDD, so... ) and save the information there . Wich is the correct way to do so, without losing all my software and/or information??
Other details:
* Rright now, i don't have ubuntu installed on my pc ( I'm using a live cd ).
* I'm using ( or was ) win 7.
* The only partitions on my HDD is an ntfs ( 60 GB ) and an unallocated ( 240 GB )
I had to install a new disk drive in my PC a week ago because the old drive died. The new drive is a 160 gig drive. First I installed Win XP with S/P 3 and everything was fine. Then I installed Ubuntu 8.04 and the troubles began. Ubuntu resized the Windows partition down to 8.81 gig and used the other 137.44 gig for Ubuntu. When I booted into Windows I started getting nasty little messages about "not enough disk space". SOOoooo....... I booted using the Ubuntu install CD and ran "sudo gparted" in a terminal window. I tried to resize the ext2 partition but got an unknown error.
Then I ran fixmbr in Windows to get rid of grub. Then I tried running gparted again to delete the ext2 partition. Got an error that said "can't delete the partition because it's mounted". So I tried to unmount the partition but got a message that the command "unmount" could not be found. After that I installed Partition Magic in Windows and tried that. It sees the ext2 partition but says it's unsupported when I try to delete or resize it.
I ran fdisk but it doesn't see the Linux partitions either, so I can't delete them in that program. I finally tried to format the disk but now I have a 9 gig drive with nothing on it. How do I get those Linux partitions off the drive so I will have a 160 gig drive that I can start over with? I've spent 6 days this week reinstalling XP and all of my programs, and now everything is gone because Ubuntu decided to be a disk hog.
I have an unallocated space at the end of my hdd, which is about 10 gb. I installed Pardus on that space, but then deleted the partition to install something else (I know I did not have to delete it, I could simply install the new thing over it), i dont remember exactly how, but it was from my Debian System, not from a LiveCD.Now, I am unable to use that space. GParted gives an error and says:Warning: the kernel failed to re-read the partition tableon /dev/sda (Device or resource nusy). As a result, it may not reflect all of your changes until after reboot.
View 4 Replies View RelatedI'm trying to create a persistent live Jessie system on my 8GB USB drive.
If that matters, I'm currently on an Arch Linux system, and I partly followed what's on the relative wiki (Pages Create a new MBR for a USB stick, Manually create a USB flash installation and Install Syslinux), plus a CrunchBang post explaining how to make a persistent live USB out of any Jessie-deriving distro (like their BunsenLabs Hydrogen).
The problem is, even if Debian boots up more than fine, the system isn't persistent at all.
Here's what I did (I know some passages are redundant, but still...):
Downloaded the Cinnamon flavor of Jessie via torrentErased the old MBR
Code: Select all# dd if=/dev/zero of=/dev/sdb bs=512 count=1 && syncCreated a 1.1G W95 FAT32 (LBA) active partition and used the remaining space on a Linux partitionFormatted the first to FAT32 and labelled it "Debian64". Formatted the second to ext4 and labelled it "persistence"
Code: Select all# mkfs.vfat -n Debian64 /dev/sdb1
# mkfs.ext4 /dev/sdb2 -L persistence
Mounted the first partition and the iso
[Code] ....
I've created live squeeze usb-hdd and if I boot first time the udev system writes the MAC address of the network interfaces into /etc/udev/rules.d/70-persistent-net.rules.Because I use full persistence, the file is there on the next boot and I don't get network running automatically on other computers. My problem is, howto remove 70-persistent-net.rules every time during the startup?
View 5 Replies View RelatedI was installing windows vista on my computer, so I backed up everything to a external drive which was formatted with ext2. I then proceeded to install windows vista. When I got to the partition section I tried installing windows vista to my raid 0. When it didn't work I decided that I would delete all my existing partitions and create a new one. Well in my haste I accidentally deleted my ext2 partition from my backup drive that was still connected. As soon as I realized what I had done I shutdown the windows install and disconnected my external drive. This is the current state of my drive from parted:
Model: WD 15EADS External (scsi)
Disk /dev/sdb: 1500GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
I know that the drive only had one partition before and that it took up the entire disk and it was ext2 (maybe ext3).
This might be a longshot but i used to use the 4 bay NAS here Which formated the HDD JBOD array to EXT2 , Anyway i want to move to an 8 bay DAS now but i cant find an application to convert the partitions .
Partition magic says the partitions are unformatted and the partition id is set to linux raid auto . Is there any way to convert this partition to vanilla EXT2 so i can use partition magic on it ? Its a 4TB array so copying isnt possible.
How to format partition (already exist partition Linux/any OS) during Installation using Linux OS installation CD/DVD?
View 2 Replies View RelatedI have a usb flash drive and according to sources I found out after the fact that I should have used ext2 instead of ext4 due to the extra write operations.
Is it possible to convert the ext4 root partition to ext2 or do I need to backup, reformat, and restore?