Ubuntu :: Delete Partition Trying To Create A New Shared Fat32 One?
Jun 13, 2010
I am having the same problem. I did delete partition trying to create a new shared fat32 one.below fdisk -l screen..I booted from live CD and tried quite a few things already...I think I need a clear direstions for it is getting annoying...
Device Boot Start End Blocks Id System
/dev/sda1 1 5906 47437866+ 7 HPFS/NTFS
Partition 1 does not end on cylinder boundary.
[code]....
View 5 Replies
ADVERTISEMENT
Oct 12, 2010
I have win 7 installed on a primary partition along with two other primary partitions containing a recovery partition and system files partitions. (don't know exactly what the latter is for.) I made a defrag and resized the win partition to make some free space for a primary ubuntu partition.I then inserted the 10.10 live disc and created a fat32 shared partition, a root (/), a /home Nd a swap in the advanced gparted menu, BUT every time I try to initiate the installation I get an error message saying that installer couldn't create the fat32.
View 4 Replies
View Related
Oct 3, 2010
I am dual booting windows 7 and ubuntu 10.04 using grub. I am using a 1tb samsung hard drive. Ubuntu has 750gb and windows has 250gb. I want 500gb of my HD to be FAT32 so I can put all of my music, pictures, and videos on it. I don't have more than 100gb used on either partition.
I have done quite a bit of searching and browsing, but I can't find a good step by step guide to do this. I am guessing I need to figure out how to use fdisk?
View 3 Replies
View Related
Jun 19, 2010
I dual boot, in the process of installing Windows 7 & Fedora 13 on a new drive. Back in the day when it was risky for the newbie to read/write NTFS, I created a "shared" FAT32 partition. Even though the later Fedoras could read/write NTFS fresh out of the box, I have kept the "shared" partition for my important files (email, documents, digital camera pics).
Now that I'm installing Win7 and Fedora 13 on a new hard drive and I'm partitioning my disk, I'm scratching my head trying to decide how I should format this partition. I was considering the FAT32 again, but I'd like 50GB, not just 32. At the same time, I'm thinking of making the size sacrifice because, and maybe this is just carryover from the olden days and groundless, I have an irrational worry about using NTFS for my most important files.Maybe someone could assuage my fears. Is it just as safe, at this point, for files to be on a NTFS partition and run under Fedora as they are under FAT32?
View 6 Replies
View Related
May 15, 2011
On my Linux system, I want to create a symbolic link to a folder on my Windows 7 partition formatted FAT32. I use:
sudo ln -s /media/OS/Users/dennis/AppData/Roaming/.minecraft ~/.minecraft
However, I end up with a file in my home directory called .minecraft and when I try to access it, I receive:
bash: CD: .minecraft: Too many levels of symbolic links
is there a way to make the symbolic link to the FAT32 folder?
View 2 Replies
View Related
Dec 5, 2010
i currently have both xubuntu 10.10 32-bit and windows 7 64-bit installed on my laptop which i use mostly for college work and basic programming (i'm still learning to program).i have a 150gb partition with win7 installed, a 20gb partition with xubuntu installed and a 15gb partition with my linux home folder on, the rest of the space is unused because i thought i may need it for something else in the future.the home folder partition is formatted to etc4, i now have a need to access this data from win7 for college work, i know that windows doesn't support mounting of etc file systems so i have hit a problem.
i thought about changing the type of partition from a ect4 to fat32 but will this delete my data? or ,are there any third party software packages for windows that will allow me to mount ect4?
View 1 Replies
View Related
Apr 28, 2011
Am trying to format my SD card and creat a FAT32 partition for booting
after following procedure i was stuck with the below command
Command (m for help): [t]
Selected partition 1
Hex code (type L to list codes): [c]
Changed system type of partition 1 to c (W95 FAT32 (LBA))
i don't have the [c] option or any "W95 FAT32 (LBA)"
View 3 Replies
View Related
Aug 22, 2010
have set up a server with OS on a 250GB disk (sdd) and 3x 1.5TB drives for a RAID5 storage setup (sda, sdb and sdc).Using webmin I can delete and create a primary partition in each one. But while I can also format sda and sdc, it refuses to do sdb for some reason:Executing command mkfs -t ext4 /dev/sdb1 ; partprobe ..mke2fs 1.41.11 (14-Mar-2010)
/dev/sdb1 is apparently in use by the system; will not make a filesystem here!
But I'm not using it
simon@ubuntu:~$ lsof | grep /dev/sdb
simon@ubuntu:~$ lsof | grep /dev/sdb1
[code]....
View 9 Replies
View Related
Aug 17, 2010
using suse 11.3 and kde 4.4.4 on the mounted fat32 partition I cannot change icons partition is mounted in fstab in this way:/dev/sda8/ /dati vfat user, users, gid=users, umask=0002, utf8=true, 0, 0.I can create files folders modify, move and save them on the partition but if I try to change the icon (in dolphin right click>properties>click on icon) of the /eros folder (or any other folder or link) system gives me
this error:impossibile salvare le proprieta' , non hai accesso sufficiente per scrivere su /dati/eros/.directory tha in english is something like this: impossoble save properties, you havent enough permission access to write on /dati/eros/.directory this happen also as superuser I remember that with suse 11.0 or 10.3 I was able to change icons on fat32 partitions, now with 11.3 I cannot, there ought to be a way to do what I did with the previous version with this 11.3 brand new ad more advanced version shouldn't it?
View 11 Replies
View Related
Jun 11, 2010
I want to create a "Shared Memory" in linux, then create multiple "Shared Objects" that can access to a Table for example; And one of them can write something into the Table and the other can access and read it, so that these operations can be handled by programmer! I'm using Ubuntu 9.04 and I've set it's runlevel at 3 (I have commandline environment now!) I've searched the Internet so much, but couldn't find a good sample code for this! I have no experience about it and need your help to introduce me a sample code about it and advise me how to compile and use it with "GCC"?!
View 6 Replies
View Related
May 31, 2011
I got tired of dual booting on my old computer so on the new computer I am planning to run XP on VMware Player. The problem is that on the new computer neither Ubuntu or XP can "see" the FAT32 partition. I intend to use the FAT32 partition for photo images and old Windows files and need access from both Ubintu and XP.
Partition table entries are not in disk order.
View 5 Replies
View Related
Jun 24, 2010
I've a new format in my HDD and put win7 and ubuntu 10.04. I made a partition about 50GB so that i can get files from ubuntu to windows and the other way around.I can see that partition in windows but not in ubuntu.
P.S. i can see the windows partition in ubuntu
View 9 Replies
View Related
Aug 22, 2010
can a fat32 partition be marked as /usr or /home during or after installing ubuntu?
View 5 Replies
View Related
Jan 19, 2011
I have a partition to share files between Ubuntu and Windows, sometimes it becomes read-only but it's always reversible, this time it seems completely locked, all folders even have lock symbols and I can't change any file even if I open nautilus as root.
I can use it through windows with no problems, and have tried using PySDM to modify it but it's still the same.
View 3 Replies
View Related
Apr 5, 2010
I'm installing a new SSD this upcoming weekend. My thought was to go easy on it so it lasts longer by putting my swap files on a mechanical drive instead of the SSD. I don't - however - want to waste space for swap files. It would be nice if I could use the same 6GB FAT32 partition for swap files for both Windows 7 and Ubuntu. Is this possible? It might not even be necessary though, I have enough RAM that I rarely use the swap file at all (I've even considered going without swap all together), so it probably won't pose a huge load to the drive.
View 9 Replies
View Related
Jun 28, 2010
I purchased a new HD and my goal is to have a Windows partition, an Ubuntu partition, (a swap partition of course), and large fat32 partition for storing data to be used on both the Windows and the Ubuntu side.
I am installing from USB and do not yet have a copy of Windows to install. I keep getting an error saying that the attempt to mount vfat failed.
View 6 Replies
View Related
Dec 5, 2010
I have a sandisk sd card with 3 partitions two ext2 and one fat 32 partition for some reson Ubuntu only automounts two ext2 partitions. I've tried inserting another card with only one fat32 partition and the system doesn't mount it. Both cards are visible in gparted byt not in "Places" menu.
View 4 Replies
View Related
Apr 8, 2011
I'd like to wipe free space on a fat 32 partition, momentary by doing
Code:
cat /dev/urandom >garbage
That stops each time the file is 4GB big, as this is the maximum supported filesize for fat32 partitions. So I redo the command, only writing now to "garbage2" or so.Is there any more elegant way to do that? Maybe by script which automatically generates new file names, until the disc is full?
View 7 Replies
View Related
Jan 27, 2010
I want to mount my FAT32 partition automatically on startup. It gets mounted but the problem is that all the files in the FAT32 partition are shown as owned by root. Because of that I can't paste files or write to this partition. This is my fstab file
Code:
# /etc/fstab: static file system information.
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sda5 during installation
[Code]....
View 4 Replies
View Related
Apr 26, 2010
I purchased a FREECOM 1,5TB external USB-HDD and find out that there was FAT32 as FS. I windos there are not posasible to make bigger FAT32-partition than 32GB. I wan't to have windos-FS to use my work and on my freinds computers.Do you think I could format to NTFS or keep the FAT32? I don't have any big files.
View 2 Replies
View Related
Jun 3, 2010
I am installing Debian on my netbook. I need to make a single fat32 partition on my usb flash drive. I really love linux and want it on my netbook.
View 4 Replies
View Related
Mar 16, 2011
I'm having difficulty making my FAT32 drive capable of read/write. I followed the instructions here (http://ubuntuguide.org/wiki/Ubuntu:Maverick#Windows_Compatibility) and added the following line to my /etc/fstab file:
Code:
/dev/sda4 /media/WinD vfat quiet,defaults,rw 0 0
However, when I rebooted the drive is still read-only
View 4 Replies
View Related
Jan 6, 2010
I accidentally deleted some video files on my digital video camera, the Hard Drive is FAT32 and the videos are saved as a .mod file.I've had good success recovering files in the past with Photorec but there is no option for .mod files with this software
View 1 Replies
View Related
Mar 17, 2010
I formatted 56 GBs of my hard disk space into fat32 and it seems that 27 gbs of it is used! Though direct checking from the volume itself shows nothing like this, gparted still insists 27 gbs are used.
View 4 Replies
View Related
Aug 18, 2009
is there a way to recover data from a hd partition type fat32...cause ...cause right now it shows up as unallocated space..earlier i tried installing windows in a unused partition located just above this partition....i need to recover the data real soon...
View 1 Replies
View Related
Feb 18, 2011
I have created live persistent usb-hdd (fat32) image, put into USB stick, but now I should create persistent live-rw partition. How this persistent partition should be formatted? Should I format with ext2, or fat32?
View 1 Replies
View Related
Dec 19, 2009
I have recovered a whole dying hard drive using the command ddrescue, only 8192 byte out of 4.3 gigabyte are unreadable.I have used the command (gnu) ddrescue /dev/sdb DiskImage.img..But unfortunatly this way i have a full-disk image that is not mountable... ( or at least i don't know how to mount it ), and the disk doesn't seem to work anymore that good... ( crack crack crack... ).To see the partitions inside the "big" file, i have used fdisk -l, and damn there is only one partition, but how can i mount the content???
I know i could use photorec foremost or similar software, but since the disc image is almost perfect, i would be able to preserve file names, paths and dates...The last idea would be to mount it as a full-drive image with Virtualbox... But transferring data would be quite annoying.
View 10 Replies
View Related
Feb 23, 2011
I had a drive with a partition layout like so:
~50gig Windows 7 - NTFS
~100gig Ubuntu - EXT3
~100gig Snow Leopard - HFS+
~100gig Extended Partition
-- ~100gig Swap Disk - exFat
I wanted to delete the Snow Leopard partition and format the Swap Disk partition to something else. exFat was causing major file size bloat on small files. QT sdk bloated to like 11 gigs or something ridiculous like that. Anyways, I loaded up an Ubuntu 10.04 LTS live cd and gparted then deleted the Snow Leopard partition. Gparted said "Mission Accomplished" and tried to rescan the drive, but never found it. At this point I restarted the computer, a dell laptop, which didn't boot with an unable to find a bootable device error. The ubuntu live cd doesn't see the drive anymore. gparted scans for drives indefinitely and fdisk -l has no output.
View 9 Replies
View Related
Aug 18, 2011
KDE 4.6 - opensuse 11.4.
I have a separate ext4 partition which contains all my data (music, movies, etc). When I delete files from this partition it is very slow because it copies files from my data partition to the Trash folder in my home partition. How can I avoid this? Can't the trash be configured so that it uses a trash folder in each partition instead of copying files to another partition (which is slow).
View 9 Replies
View Related
Mar 4, 2011
I have a program that creates and uses a shared memory segment. I am trying to find out how to detach and delete this shared memory segment when I hit crtl-C, and I still need the process to terminate.shmdt() and shmctl() have variables that are local to the main passed to them(shared and shmid)
Code:
//Prototype
void leave(int sig);
//part of code trying to use signal handling
if(signal(SIGINT, leave))
[Code]...
View 3 Replies
View Related
