Ubuntu Installation :: Error: "you Need To Load The Kernel First" On The GRUB Screen
Sep 24, 2010
I upgraded my ubuntu version 8 to 10.. I was using my new version normally, but on the GRUB screen, I have two choices (ubuntu 1 and 2.. something like 'generic-2.6-32..) I could only choose the second option.. because the first option, return this error: you need to load the kernel first.
Ok, i'm using the second option... but when i'm tried to install the driver of my nvidia 3d board, the second option of boot is also not working.. =(return this erros: kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block (8,33)... both are kernel problems.. my instalation of ubuntu 10.04 was perfectly successfully (aparently)..
View 9 Replies
ADVERTISEMENT
Jan 4, 2010
Over the past few days I have been trying to install an older kernel (kernel 2.6.28.1) on ubuntu 9.10 64-bit WUBI installation. I compiled, installed, and updated my grub for the kernel. When I reboot, the grub menu correctly gives me the option of booting into the older kernel but when I do so I receive the following error message:
error: you need to load the linux kernel first.
I am at a complete loss on how to fix this. I even downgraded grub but I still get the same error.
View 2 Replies
View Related
Apr 14, 2010
I tried to update to 2.6.31-20 kernel but I think I messed it up, because when I click on it in the GRUB it starts to load but then it goes back to the dell boot up screen and I have to use the older one in order to get onto ubuntu. Is there anything I can do to fix this?
View 3 Replies
View Related
Mar 25, 2010
So I have been using Ubuntu for the past couple of months using Wubi, mainly because my parent's are afraid that I'll screw something up on the computer if I partition the hard drive and stuff like that. And Today I installed the latest updates for 9.10, asked me to restart the computer, and now whenever I try to boot using the latest kernel GRUB keeps telling me to "Load kernel first". The funny thing is that I can boot with the older kernel fine, But I would really like to get the lates updates, which I can't using the older kernel.
View 9 Replies
View Related
Nov 25, 2010
After installation of Ubuntu 10.10, grub loads and has the right menu list. However, Ubuntu doesn't load and I get an error message of :Gave up waiting for root device. (with a list of common problems)There is also:ALERT! /dev/disk/by-uuid/1584598e-b8e5..... does not exist.
View 9 Replies
View Related
Jun 28, 2010
I have windows xp and now I have installed UBUNTU 9.10. When my laptop starts it comes up with the option of Windows Xp and Ubuntu. Selecting windows xp works fine here but Selecting UBUNTU comes up with another screen giving three options.
1. UBUNTU
2. UBUNTU recovery and
3. Windows Xp
Selecting any of the above doesnt work here. With option 1 & 2 it gives the error message
error: you need to load the kernel first
I am totally new to this UBUNTU.
View 1 Replies
View Related
Oct 11, 2010
I've finally gotten around to installing Ubuntu 10.10. I currently have it installed on on a 320GB HDD. It's the 64bit. I also have Windows 7 x64 on a 1TB HDD. After I installed it, I keeping getting "Error: You Need To Load the Kernel First." Windows 7 boots up fine, but Ubuntu doesn't. I'm almost completely new to Ubuntu so I don't know how I would go about fixing this.
View 9 Replies
View Related
Jan 10, 2010
So after having performance issues with Karmic in ext4 I decided to install Hardy with ext3. Was blazing fast, epic, I loved it. But I wanted firefox 3.5 & all the other cool stuff Karmic has.. so I decide to install Karmic, but this time with ext3 instead of 4.
First installation: After the installation went fine, no errors while installing or anything. I remove the CD and reboot. "GRUB Loading, please wait.. Error 15" I did my googling, with the live CD to try and figure out a way of fixing this error. No luck. I did find out that the error is caused by the GRUB trying to load form the wrong drive. So I try to boot directly from the Karmic drive, Error 15. Try to boot directly from the Windows drive, Error 17.
This is the first time this has ever happened to me. First time installing Hardy, everything went great. Installing Jaunty, everything went great. Installing Karmic (for the first time) everything went great. Uninstalled Karmic and installed Hardy, everything went great. Uninstalled Hardy to install Karmic = FAIL!. I did a clean install every single time. The OS is being installed (clean) in the same drive.
A 40GB drive for Windows. A 200GB drive for Ubuntu +/home +swap, and a 120GB(FAT32) for storage.
I installed Karmic 3 times, yes.. 3 times. The last time I installed I removed both the 40GB & the 120GB drives. Leaving only the one I was going to use for Ubuntu, the 200GB drive. After the installation I rebooted and Karmic loaded without problems. I'm in Karmic right now and it isn't all sluggish like it was with ext4, guess my old drives aren't good with ext4 *sight*.
But I can't use my Windows drive. When trying to boot directly from it, it gives me "GRUB Error 17" - I have to disconnect the Ubuntu drive to boot into Windows. Quick question: What the **** is going on?
Someone help, please.. I'm tired of this ****.. and if I have to install Karmic one more time, I won't. I'll just give up and disconnect my Ubuntu drive, put it away and let it accumulate dust somewhere, seriously.. Someone help me correct this without having to install the OS again.
The GRUB error is while the GRUB is loading. It doesn't give me the option to select a OS.
View 9 Replies
View Related
Mar 7, 2010
I've been using Ubuntu since 7.10 Gutsy Gibbon. I only recently fully switched to Linux OS's, and Ubuntu is now my primary. I currently have 9.10 installed. CURRENTLY I also have Backtrack 4, and Fedora 12 (Ugh!).Previously, I thought something was wrong with my my filesystem in Ubuntu 9.10, and after an upgrade of the linux kernel, I started to get Error: You need to load the Kernel First. That's where my problems started. I had upgraded to 9.10 from 9.04 and I still had Grub Legacy, so I went through hoops to try and get it to work, but eventually everything just kind of broke, and I completely wiped off my partitions on it and started fresh installs of all 3.
And now that the new linux kernel is released, 2.6.31-20 generic (I think... That's what the highest number on a file I can find in /boot is)I went through a few more hoops and ladders and tried to get it to work, but to no avail. I've looked the internet for a solution to this and tried just about everything but there is no unified answer, and I've seen on Launchpad there are alot of bugs that are classified as 'Fixed', but the problem still remains.I took out the 'quiet splash' part in the GRUB2 line for the newest kernel and it didn't do anything. It only changed it to "Error: Couldn't find file".This is the top two kernels (Main and Recovery for the new, and Main and Recovery for the previous working one)
Quote:
### BEGIN /etc/grub.d/10_linux ###
menuentry "Ubuntu, Linux 2.6.31-20-generic" {
recordfail=1
[code].....
View 9 Replies
View Related
Aug 16, 2010
I have Windows XP, Vista and Ubuntu (10.04) all installed on my single hard drive. I re-installed XP and then ran the Vista CD to repair the Vista bootloader so that I could boot into XP and Vista. I can't figure out how to boot into Ubuntu now. I tried using EasyBCD (I believe an older version, maybe 1.72) to add Ubuntu to the Vista bootloader but I didn't have any luck. Ubuntu is in the menu, but when I select it, it goes to a screen that has GRUB in the upper left corner and does not load Ubuntu.
If it helps, before I re-installed XP and re-installed the Vista bootloader I was using GRUB for XP, Vista and Ubuntu because Ubuntu was the last thing to get installed.Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot InfoSummary:===============================> Windows is installed in the MBR of /dev/sdasda1: _________________________________________________________________________File system: ntfsBoot sector type: Windows Vista/7B
View 7 Replies
View Related
Jan 24, 2011
I installed bt4 alongside my windows and fedora13 partition, but my fedora won't boot after that, so I updated grub to 1.96, but still fedora13 won't boot, it displays the error, "You need to load the kernel first". When I try to boot fedora from grub command line, linux (hd0,6)/boot/<TAB> it does not show any entry, although my fedora partition is intact with vmlinuz and initramfs inside the /boot directory. BTW (hd0,6) is my fedora13 partition, file system on fedora13 is ext4, while on bt4 it is ext3.
View 2 Replies
View Related
Mar 24, 2011
I have a new acer machine which runs fine on 10.10 mythbuntu desktop livecd. Install seemed fine.
Then I ran an update and on reboot I get a kernel panic error. Research on this reveals it as a very deep subject which can consume many hours, so I opted to reinstall.
This time with ubuntu 10.10. I've tried different CDs, liveusb. Same errors.
So, the question is this - where do I concentrate my efforts - somewhere ubuntu doesn't like this machine, or grub. Does a reinstall overwrite the grub install too? Or do I have a bogus grub install I need to purge before I will get anywhere.
View 5 Replies
View Related
May 23, 2010
When I try and boot my Debian computer I get the messages: Grub Loading stage1.5. Grub loading, please wait... Error 15 Is there any way of recovering from this - or is it simply a fresh install? I was attempting an upgrade from Lenny to Squeeze and despite a few hurdles it looked like it was all happening. Got the new kernel loading, and the new grub. It looked as though grub2 was working so I ran the grub-remove-legacy-support command (something like that) and now my computer won't boot grub or Linux.
I'm assuming the MBR on my harddrive is lost, however I don't know what state the partition is in. I'm guessing that maybe this has been lost as well. I tried a few tools from the Ultimate Boot CD but nothing here was able to re-install my grub or boot from any partition or even mount my file-system. I'm fearing the worst but would like it confirmed before I blow it all away with a new install.
View 8 Replies
View Related
Feb 9, 2009
I had Fedora 7 and Windows Vista dual booting on my computer. I just installed Fedora 10. When the live CD asked me where to install it, I chose "Remove all Linux Partitions and create default layout" The installation went perfectly, but now when reboot my computer, it boots directly into Fedora; GRUB does not load to ask me which OS I want to load. I know I did not overwrite Vista because I can still view my Vista files through Fedora. Here is my grub.conf file:
[Code]...
What do I need to do to make GRUB load again upon booting?
View 2 Replies
View Related
Aug 23, 2010
I am currently running 9.10 ubuntu (gnome). I have a dual core intel chip at 3.00 ghz. My mobo is an ASUS P5ND2-SLI. My mobo will support up to 8gb of ram. Now, as we all know, 32-bit os/kernel will only support like 3.2gb, and 64-bit like 4gb. I'd like to install a pae kernel so I can get the most from my mobo, but honestly, I don't have a clue where to start looking for a pae kernel. I'd like to be able to select it from the list that already appears after the grub loads, and if I like it, be able to remove the rest from the list, or just make it default.
Question, in CPU-G, it says my architecture is i686. I don't know if that's the os/distro, or the kernel itself. it also lists the GCC version as 4.4.1 and Xorg as 1.6.4. my current kernel is Linux 2.6.31-22-generic. Again, I'm trying to find a pae kernel, but I don't know if my os/distro will make a difference, if the architecture is the kernel or os itself. I am still fairly new to ubuntu, and I must say, I've made the switch completely from windows.. which blows...
View 3 Replies
View Related
Aug 29, 2010
I unfortunately remove "some" softwares on my OpenSuse10 (preinstalled on my laptop, without cd driver) cause I was running out of space on hd. Icons starts to dissappear ...
Then I have only the Grub 0.97 shell that appears and to use to solve the problem... tried to boot kernel, but said that it "must be loaded before boot".
In the Grub 0.97 black window I have two lines :
I press "b", to boot with the First line : kernel (hd0,2)/boot/vmlinuz ... but the window turns blue and said "all data would be lost", so it shut down the system automatically to avoid this.
I press "e" to edit the command in the boot sequence for the same line, but don't really know what to tell Grub to do.
I must get my important datas back on my hd before "Restore to factory settings" (the last option). Any solution ?
Maybe it is a step on a solution ?
From [url] I downloaded linux kernel 2.6.27.27 on a usb memory stick. Could it be useful ? how to ?
View 9 Replies
View Related
May 12, 2010
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies
View Related
Jul 16, 2011
Well after a power failure yesterday this is what I get:
Grub loads with 4 options ....
Choose to load Ubuntu I get ...
Error: cant load file Error: you need to load kernel first
I'm a N00b, got ubuntu 11.04 loaded on a 250 gig worked great till power failure
View 3 Replies
View Related
Apr 11, 2010
First the hard data:
Upgraded from Ubuntu 9.04 to 9.10 via upgrade manager
System is AMD 64
Have dual boot with XP on seperate hard drive
[code]....
Then the wheelspin:
Seem to have knocked out GRUB as normal loading screen does not appear anymore.
Worse, I think I accidently installed grub to something labelled SDC5.
Cannot get anything except the "grub rescue" prompt. I'm not sure if using the LiveCD (9.10) can help. Have tried a few prompts from other threads but just ended up with mud splattered all over the place. I'm gathering I need to load grub, but can I do it using any grub rescue commands?
View 9 Replies
View Related
May 21, 2010
I just installed linux mint a couple of days ago and everything went great but now the grub screen takes about 20 seconds to a minute to load. It's not a huge issue but kind of annoying since the one that ubuntu installed took a second and I was at the menu. I imagine that it has to do with the background picture but i'm not sure if that would slow it down that much.
View 4 Replies
View Related
Oct 23, 2010
I have installed Ubuntu 10.10 on a USB 2.0 flash drive (8GB),like this: [url]
The installation was successfull, but when i want to boot ubuntu, it shows the grub, and after it, an error message: "You need to load the kernel first. Press any key to continue"
I've got a Macbook Pro 13'' (2010 edition) with a Intel processor.
My grub.cfg file is here:
Code:
View 9 Replies
View Related
Mar 15, 2010
I have ubuntu 9.04 ultimate edition 2.4 ,I am getting grub load error 18 from many days .. how can i get rid of this problem .. i used to remove the jumper & CMOS battery of motherboard whenever i got this problem ,but now even that is also not helping .. for some 2 days there wont be any problem & then the problem again repeats
View 4 Replies
View Related
Aug 8, 2010
I have found that APACHE or 'httpd' is installed in my machine. But the problem is I can start or stop the httpd but whenever I load the url http://localhost in Mozilla it shows a page load error.I have done this ,
$ /etc/init.d/httpd start
then this
$ /etc/init.d/httpd graceful
[code]....
View 3 Replies
View Related
May 3, 2010
Had 3 partitions on a hard disk. Booted vista & deleted the windows 7 partition & then expanded the vista partition into the windows 7 partition. Vista kept working but when i rebooted grub starts to load & gets an error 17. How do i recover?
Previously grub would come up & give me the choice of ubuntu or vista. If i selected vista i got the choice of vista or windows 7.
View 5 Replies
View Related
Mar 18, 2011
Apology for dual post I realized was in wrong place.Created verified 11.3 live CDInserted, restarted, welcome screen, choices next, I choose installation.Kernel loaded then black blank screen guess you call it a freeze upWindows 7 Home Premium 64-bit Edition Partitioned plenty room
View 9 Replies
View Related
May 16, 2010
for the last few releases, starting with 9.04 i've been having serious crashing problems with the nvidia driver. whether i installed it manually using the latest drivers directly from nvidia, or installing them through the restricted driver option. after a few hours CRASH. it's been awful. and i tried everything from this side to the moon to fix this issue, all to no avail. no idea why i've even stayed with ubuntu after all these issues. came from the debian world back in 5.04, and almost moved back a few times. but i did a clean install of 10.04, and thought i'd give the nvidia driver one last chance... if it didn't work i'd be moving back home to debian (with the suspicion the issue would stay).
so after i tried the restricted driver and CRASH. nothing to fix it. then i thought ok i'll try to use the latest driver from nvidia. but ran into this error when installing it:
Quote: ERROR: Unable to load the kernel module nvidia.ko. This happens most frequently when this kernel module was built against the wrong or improperly configured kernel sources, with a version of gcc that differs from the one used to build the target kernel, or if a driver such as rivafb/nvidiafb is present and prevents the NVIDIA kernel module from obtaining ownership of the NVIDIA graphics device(s), or NVIDIA GPU installed in this system is not supported by this NVIDIA Linux graphics driver release. so after googling around i found a fix to this error i was getting during the install:
Quote: sudo nano /etc/modprobe.d/blacklist.conf
blacklist vga16fb
blacklist nouveau
blacklist rivafb
blacklist nvidiafb
blacklist rivatv
[Code]...
View 5 Replies
View Related
Jul 31, 2011
is it ever possible to do dual booting with grub(legacy) ever at all!. it is possible provided i take some pain, here is the link of that post [URL] i was coward and weak i didn't try that out then. but i did try it out. now so if u haven't seen the post .... I've installed Fedora 15 desktop(Gnome) with physical Logical volume called vg_fedora lv_root(ext4) ,lv_swap and lv_home(ext4), with 500MB /boot partition and had about 200GB free hard disk space ... so i wanted to install Scientific Linux 6.1 (because our school uses RHEL 6.1)
so, while running the installer I made (added) a logical volume lv_Scientific with ext4 FS and made its mount point (/) and used the MBR /boot which overwrote the Fedora /boot (completely OK and was as expected) i restarted after installation i got SL log in and as per the directions of the thread i copied the boot stanza from grub.conf of fedora 15 (which i already had copied and pasted into a text file and copied it from there)and pasted it into grub.conf of SL you may ask why did i choose same physical LVM too save swap space ... if i had made another physical LVM i had to make another swap ( i like LVM ... its cool)
completely unexpected happened Fedora now boots but not SL when grub starts i get this error 27 unrecognised commad and when i press <enter> i get grub menu with SL and fedora when i press on Fedora it works well i get my fedora login and i did login .. everything works fine but when i press SL it goes to the previous black screen grub error 27
[Code]...
View 14 Replies
View Related
Aug 23, 2010
I dual booted Ubuntu with Win XP, and decided to upgrade XP to Win7. Thought I knew how to do it, so excuse my dumbness. Here's where I'm at: I booted GParted, and deleted the /, /home and swap partitions, making unallocated space. I expanded Win XP partition and tried to re-boot, expecting only Windows to show. Instead, I got the Error 22 error when Grub was the first thing to load. So, back to GParted, deleted the primary partition, created a new bootable partition, formatted it NTFS, and put the Win7 disk and rebooted. This time I got a Windows error "can't load NTLdr".
Rebooted the computer without the disk, and got the Error 22 again. So it seems (?) that I'm not able to change/remove or otherwise, the Grub boot file. So the drive is currently useless, unless someone can tell me how to get the disk back to a bootable state where I can load Win7, after which I can create Ubuntu as a dual boot again.
View 4 Replies
View Related
May 25, 2011
I updated the Ubuntu version 10.04.1. After updating the program it tells to restart the system. After restarting the system the following message appears:
error: can not read the linux header
error: you need to load the kernel first
View 4 Replies
View Related
Nov 23, 2010
I have a dual boot system with ubuntu 9.10 x64 and Windows 7. Everything has been working fine for a a long time but yesterday I tried to delete an unused partition through the Disk Utility in ubuntu (System->Adminstration->Disk Utility) and everything was messed up. I used to get the "Grub error: Unknown filesystem". I managed to create an ubuntu bootable usb and followed some tutorials for fixing grub but all i managed to do is to get another error: "Grub error: No such disc". After some experimentation i got
"Grub stage 1.5" which gave me a grub> command prompt./dev/sda is the drive containing Windows and Ubuntu.
Code:
[ Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 0.97 is installed in the MBR of /dev/sda and looks on the same drive
in partition #6 for /boot/grub/stage2 and /boot/grub/menu.lst.
[code].....
View 5 Replies
View Related
