General :: Grub - Error "You Need To Load The Kernel First"
Jan 24, 2011
I installed bt4 alongside my windows and fedora13 partition, but my fedora won't boot after that, so I updated grub to 1.96, but still fedora13 won't boot, it displays the error, "You need to load the kernel first". When I try to boot fedora from grub command line, linux (hd0,6)/boot/<TAB> it does not show any entry, although my fedora partition is intact with vmlinuz and initramfs inside the /boot directory. BTW (hd0,6) is my fedora13 partition, file system on fedora13 is ext4, while on bt4 it is ext3.
View 2 Replies
ADVERTISEMENT
Jan 4, 2010
Over the past few days I have been trying to install an older kernel (kernel 2.6.28.1) on ubuntu 9.10 64-bit WUBI installation. I compiled, installed, and updated my grub for the kernel. When I reboot, the grub menu correctly gives me the option of booting into the older kernel but when I do so I receive the following error message:
error: you need to load the linux kernel first.
I am at a complete loss on how to fix this. I even downgraded grub but I still get the same error.
View 2 Replies
View Related
Aug 29, 2010
I unfortunately remove "some" softwares on my OpenSuse10 (preinstalled on my laptop, without cd driver) cause I was running out of space on hd. Icons starts to dissappear ...
Then I have only the Grub 0.97 shell that appears and to use to solve the problem... tried to boot kernel, but said that it "must be loaded before boot".
In the Grub 0.97 black window I have two lines :
I press "b", to boot with the First line : kernel (hd0,2)/boot/vmlinuz ... but the window turns blue and said "all data would be lost", so it shut down the system automatically to avoid this.
I press "e" to edit the command in the boot sequence for the same line, but don't really know what to tell Grub to do.
I must get my important datas back on my hd before "Restore to factory settings" (the last option). Any solution ?
Maybe it is a step on a solution ?
From [url] I downloaded linux kernel 2.6.27.27 on a usb memory stick. Could it be useful ? how to ?
View 9 Replies
View Related
Sep 24, 2010
I upgraded my ubuntu version 8 to 10.. I was using my new version normally, but on the GRUB screen, I have two choices (ubuntu 1 and 2.. something like 'generic-2.6-32..) I could only choose the second option.. because the first option, return this error: you need to load the kernel first.
Ok, i'm using the second option... but when i'm tried to install the driver of my nvidia 3d board, the second option of boot is also not working.. =(return this erros: kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block (8,33)... both are kernel problems.. my instalation of ubuntu 10.04 was perfectly successfully (aparently)..
View 9 Replies
View Related
Mar 15, 2010
I have ubuntu 9.04 ultimate edition 2.4 ,I am getting grub load error 18 from many days .. how can i get rid of this problem .. i used to remove the jumper & CMOS battery of motherboard whenever i got this problem ,but now even that is also not helping .. for some 2 days there wont be any problem & then the problem again repeats
View 4 Replies
View Related
May 25, 2011
I updated the Ubuntu version 10.04.1. After updating the program it tells to restart the system. After restarting the system the following message appears:
error: can not read the linux header
error: you need to load the kernel first
View 4 Replies
View Related
Dec 10, 2010
I installed a suse 11.3 on my acer laptop and it worked just fine for two days.I was able to use internet as well though wi-fi driver i still had to figure out.This morning when i started it, it gave me an error like this:- Failed to load grub Error 18 now from what i understand is the solution is to downsize the harddisk partition used by the linux root to somewhat 10gb.Mine is about 40gb.
So i thought why not re-install the os again.But even after changing the bios setting to boot from cd-rom and putting in the suse dvd still its not booting from dvd and continously giving this error Error 18:Selected cylinder exceeds maximum supported by BIOS and then it comes to a command prompt like this grub>
View 6 Replies
View Related
Nov 19, 2010
I have a Dell Dimension 4400, 8 yrs old. It is set up to boot to either Open Suse 11 or Windows. I turned on the machine this morning, it booted very slowly. My screen says, "GRUB loading stage 1.5" then it says "Error 21." I can not go beyond this screen. My machine is stuck here.
View 4 Replies
View Related
Apr 5, 2011
I am trying to install Debian lenny and ext2 filesystem with GRUB as bootloader in my USB memory stick to boot linux . However , when i try it out on my PC , a grub error : No loaded kernel is shown. I have checked that the kernel image is located in /boot.
View 14 Replies
View Related
May 23, 2010
When I try and boot my Debian computer I get the messages: Grub Loading stage1.5. Grub loading, please wait... Error 15 Is there any way of recovering from this - or is it simply a fresh install? I was attempting an upgrade from Lenny to Squeeze and despite a few hurdles it looked like it was all happening. Got the new kernel loading, and the new grub. It looked as though grub2 was working so I ran the grub-remove-legacy-support command (something like that) and now my computer won't boot grub or Linux.
I'm assuming the MBR on my harddrive is lost, however I don't know what state the partition is in. I'm guessing that maybe this has been lost as well. I tried a few tools from the Ultimate Boot CD but nothing here was able to re-install my grub or boot from any partition or even mount my file-system. I'm fearing the worst but would like it confirmed before I blow it all away with a new install.
View 8 Replies
View Related
Mar 25, 2010
So I have been using Ubuntu for the past couple of months using Wubi, mainly because my parent's are afraid that I'll screw something up on the computer if I partition the hard drive and stuff like that. And Today I installed the latest updates for 9.10, asked me to restart the computer, and now whenever I try to boot using the latest kernel GRUB keeps telling me to "Load kernel first". The funny thing is that I can boot with the older kernel fine, But I would really like to get the lates updates, which I can't using the older kernel.
View 9 Replies
View Related
Nov 25, 2010
After installation of Ubuntu 10.10, grub loads and has the right menu list. However, Ubuntu doesn't load and I get an error message of :Gave up waiting for root device. (with a list of common problems)There is also:ALERT! /dev/disk/by-uuid/1584598e-b8e5..... does not exist.
View 9 Replies
View Related
Aug 23, 2010
I am currently running 9.10 ubuntu (gnome). I have a dual core intel chip at 3.00 ghz. My mobo is an ASUS P5ND2-SLI. My mobo will support up to 8gb of ram. Now, as we all know, 32-bit os/kernel will only support like 3.2gb, and 64-bit like 4gb. I'd like to install a pae kernel so I can get the most from my mobo, but honestly, I don't have a clue where to start looking for a pae kernel. I'd like to be able to select it from the list that already appears after the grub loads, and if I like it, be able to remove the rest from the list, or just make it default.
Question, in CPU-G, it says my architecture is i686. I don't know if that's the os/distro, or the kernel itself. it also lists the GCC version as 4.4.1 and Xorg as 1.6.4. my current kernel is Linux 2.6.31-22-generic. Again, I'm trying to find a pae kernel, but I don't know if my os/distro will make a difference, if the architecture is the kernel or os itself. I am still fairly new to ubuntu, and I must say, I've made the switch completely from windows.. which blows...
View 3 Replies
View Related
Apr 14, 2010
I tried to update to 2.6.31-20 kernel but I think I messed it up, because when I click on it in the GRUB it starts to load but then it goes back to the dell boot up screen and I have to use the older one in order to get onto ubuntu. Is there anything I can do to fix this?
View 3 Replies
View Related
Jul 16, 2011
Well after a power failure yesterday this is what I get:
Grub loads with 4 options ....
Choose to load Ubuntu I get ...
Error: cant load file Error: you need to load kernel first
I'm a N00b, got ubuntu 11.04 loaded on a 250 gig worked great till power failure
View 3 Replies
View Related
Jun 28, 2010
I have windows xp and now I have installed UBUNTU 9.10. When my laptop starts it comes up with the option of Windows Xp and Ubuntu. Selecting windows xp works fine here but Selecting UBUNTU comes up with another screen giving three options.
1. UBUNTU
2. UBUNTU recovery and
3. Windows Xp
Selecting any of the above doesnt work here. With option 1 & 2 it gives the error message
error: you need to load the kernel first
I am totally new to this UBUNTU.
View 1 Replies
View Related
Oct 11, 2010
I've finally gotten around to installing Ubuntu 10.10. I currently have it installed on on a 320GB HDD. It's the 64bit. I also have Windows 7 x64 on a 1TB HDD. After I installed it, I keeping getting "Error: You Need To Load the Kernel First." Windows 7 boots up fine, but Ubuntu doesn't. I'm almost completely new to Ubuntu so I don't know how I would go about fixing this.
View 9 Replies
View Related
Jan 10, 2010
So after having performance issues with Karmic in ext4 I decided to install Hardy with ext3. Was blazing fast, epic, I loved it. But I wanted firefox 3.5 & all the other cool stuff Karmic has.. so I decide to install Karmic, but this time with ext3 instead of 4.
First installation: After the installation went fine, no errors while installing or anything. I remove the CD and reboot. "GRUB Loading, please wait.. Error 15" I did my googling, with the live CD to try and figure out a way of fixing this error. No luck. I did find out that the error is caused by the GRUB trying to load form the wrong drive. So I try to boot directly from the Karmic drive, Error 15. Try to boot directly from the Windows drive, Error 17.
This is the first time this has ever happened to me. First time installing Hardy, everything went great. Installing Jaunty, everything went great. Installing Karmic (for the first time) everything went great. Uninstalled Karmic and installed Hardy, everything went great. Uninstalled Hardy to install Karmic = FAIL!. I did a clean install every single time. The OS is being installed (clean) in the same drive.
A 40GB drive for Windows. A 200GB drive for Ubuntu +/home +swap, and a 120GB(FAT32) for storage.
I installed Karmic 3 times, yes.. 3 times. The last time I installed I removed both the 40GB & the 120GB drives. Leaving only the one I was going to use for Ubuntu, the 200GB drive. After the installation I rebooted and Karmic loaded without problems. I'm in Karmic right now and it isn't all sluggish like it was with ext4, guess my old drives aren't good with ext4 *sight*.
But I can't use my Windows drive. When trying to boot directly from it, it gives me "GRUB Error 17" - I have to disconnect the Ubuntu drive to boot into Windows. Quick question: What the **** is going on?
Someone help, please.. I'm tired of this ****.. and if I have to install Karmic one more time, I won't. I'll just give up and disconnect my Ubuntu drive, put it away and let it accumulate dust somewhere, seriously.. Someone help me correct this without having to install the OS again.
The GRUB error is while the GRUB is loading. It doesn't give me the option to select a OS.
View 9 Replies
View Related
Mar 7, 2010
I've been using Ubuntu since 7.10 Gutsy Gibbon. I only recently fully switched to Linux OS's, and Ubuntu is now my primary. I currently have 9.10 installed. CURRENTLY I also have Backtrack 4, and Fedora 12 (Ugh!).Previously, I thought something was wrong with my my filesystem in Ubuntu 9.10, and after an upgrade of the linux kernel, I started to get Error: You need to load the Kernel First. That's where my problems started. I had upgraded to 9.10 from 9.04 and I still had Grub Legacy, so I went through hoops to try and get it to work, but eventually everything just kind of broke, and I completely wiped off my partitions on it and started fresh installs of all 3.
And now that the new linux kernel is released, 2.6.31-20 generic (I think... That's what the highest number on a file I can find in /boot is)I went through a few more hoops and ladders and tried to get it to work, but to no avail. I've looked the internet for a solution to this and tried just about everything but there is no unified answer, and I've seen on Launchpad there are alot of bugs that are classified as 'Fixed', but the problem still remains.I took out the 'quiet splash' part in the GRUB2 line for the newest kernel and it didn't do anything. It only changed it to "Error: Couldn't find file".This is the top two kernels (Main and Recovery for the new, and Main and Recovery for the previous working one)
Quote:
### BEGIN /etc/grub.d/10_linux ###
menuentry "Ubuntu, Linux 2.6.31-20-generic" {
recordfail=1
[code].....
View 9 Replies
View Related
Oct 23, 2010
I have installed Ubuntu 10.10 on a USB 2.0 flash drive (8GB),like this: [url]
The installation was successfull, but when i want to boot ubuntu, it shows the grub, and after it, an error message: "You need to load the kernel first. Press any key to continue"
I've got a Macbook Pro 13'' (2010 edition) with a Intel processor.
My grub.cfg file is here:
Code:
View 9 Replies
View Related
May 3, 2010
Had 3 partitions on a hard disk. Booted vista & deleted the windows 7 partition & then expanded the vista partition into the windows 7 partition. Vista kept working but when i rebooted grub starts to load & gets an error 17. How do i recover?
Previously grub would come up & give me the choice of ubuntu or vista. If i selected vista i got the choice of vista or windows 7.
View 5 Replies
View Related
May 16, 2010
for the last few releases, starting with 9.04 i've been having serious crashing problems with the nvidia driver. whether i installed it manually using the latest drivers directly from nvidia, or installing them through the restricted driver option. after a few hours CRASH. it's been awful. and i tried everything from this side to the moon to fix this issue, all to no avail. no idea why i've even stayed with ubuntu after all these issues. came from the debian world back in 5.04, and almost moved back a few times. but i did a clean install of 10.04, and thought i'd give the nvidia driver one last chance... if it didn't work i'd be moving back home to debian (with the suspicion the issue would stay).
so after i tried the restricted driver and CRASH. nothing to fix it. then i thought ok i'll try to use the latest driver from nvidia. but ran into this error when installing it:
Quote: ERROR: Unable to load the kernel module nvidia.ko. This happens most frequently when this kernel module was built against the wrong or improperly configured kernel sources, with a version of gcc that differs from the one used to build the target kernel, or if a driver such as rivafb/nvidiafb is present and prevents the NVIDIA kernel module from obtaining ownership of the NVIDIA graphics device(s), or NVIDIA GPU installed in this system is not supported by this NVIDIA Linux graphics driver release. so after googling around i found a fix to this error i was getting during the install:
Quote: sudo nano /etc/modprobe.d/blacklist.conf
blacklist vga16fb
blacklist nouveau
blacklist rivafb
blacklist nvidiafb
blacklist rivatv
[Code]...
View 5 Replies
View Related
Aug 23, 2010
I dual booted Ubuntu with Win XP, and decided to upgrade XP to Win7. Thought I knew how to do it, so excuse my dumbness. Here's where I'm at: I booted GParted, and deleted the /, /home and swap partitions, making unallocated space. I expanded Win XP partition and tried to re-boot, expecting only Windows to show. Instead, I got the Error 22 error when Grub was the first thing to load. So, back to GParted, deleted the primary partition, created a new bootable partition, formatted it NTFS, and put the Win7 disk and rebooted. This time I got a Windows error "can't load NTLdr".
Rebooted the computer without the disk, and got the Error 22 again. So it seems (?) that I'm not able to change/remove or otherwise, the Grub boot file. So the drive is currently useless, unless someone can tell me how to get the disk back to a bootable state where I can load Win7, after which I can create Ubuntu as a dual boot again.
View 4 Replies
View Related
Jul 8, 2011
I am new to Linux. I have installed RHEL 5.4 on my PC with preloaded Windows XP.
Windows was set as the first boot kernel. So if i do not choose which OS to be loaded it will load Windows by Default.
Today I got an error saying GRub Loading Stage2 read error.
View 9 Replies
View Related
Mar 17, 2010
I have Ubuntu installed in my machine, I also have Windows Vista.I have been using Ubuntu perfectly well, today I received the following message when chose to boot Ubuntu:GNU GRUB version 1.97 beta 4[Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists possible device/flies completions]
View 6 Replies
View Related
Jun 29, 2010
Can i add another kernel 2.4 in grub while kernel 2.6.31 of ubuntu 9.10 exists
View 10 Replies
View Related
Nov 12, 2009
I'm trying to create new RAM image file to get my server load raid1 module upon start, I was following redhat documentation & it suggested to use the following command mkinited --with=raid1 inited-raid1-$(uname -r).img $(uname -r) However after running this command I'm getting this message No Kernel available for 'inited-2.6.18-128.el5"
View 4 Replies
View Related
Feb 9, 2009
I had Fedora 7 and Windows Vista dual booting on my computer. I just installed Fedora 10. When the live CD asked me where to install it, I chose "Remove all Linux Partitions and create default layout" The installation went perfectly, but now when reboot my computer, it boots directly into Fedora; GRUB does not load to ask me which OS I want to load. I know I did not overwrite Vista because I can still view my Vista files through Fedora. Here is my grub.conf file:
[Code]...
What do I need to do to make GRUB load again upon booting?
View 2 Replies
View Related
Mar 24, 2011
I have a new acer machine which runs fine on 10.10 mythbuntu desktop livecd. Install seemed fine.
Then I ran an update and on reboot I get a kernel panic error. Research on this reveals it as a very deep subject which can consume many hours, so I opted to reinstall.
This time with ubuntu 10.10. I've tried different CDs, liveusb. Same errors.
So, the question is this - where do I concentrate my efforts - somewhere ubuntu doesn't like this machine, or grub. Does a reinstall overwrite the grub install too? Or do I have a bogus grub install I need to purge before I will get anywhere.
View 5 Replies
View Related
Apr 29, 2010
I am having a Ubuntu nightmare. I am relatively new to the whole Linux thing. I just updated my Ubuntu from the update manager today and after I restarted I keep getting the following error: Error: You need to load kernel first.
My boot menu shows the following:
GNU Grub version: 1.97~Beta4
Ubuntu, Linux 2.6.31-21-generic
Ubuntu, Linux 2.6.31-21-generic (recovery mode)
Ubuntu, Linux 2.6.31-20-generic
Ubuntu, Linux 2.6.31-20-generic (recovery mode)
Ubuntu, Linux 2.6.31-14-generic
Ubuntu, Linux 2.6.31-14-generic (recovery mode)
Windows 7 (loader) (on dev/sda1)
The only two that work are the last two. So I chose Ubuntu, Linux 2.6.31-14-generic and booted normally. From there I typed actionparsnip's suggested solution (which worked for other people on other versions): sudo apt-get clean; sudo apt-get --reinstall install linux-image-2.6.31-21-generic As you see I suited actionparsnip's solution to my version. The command downloaded something and made some fixes/updates and everything and seemed to have worked fine.
The system asked me to reboot, and here I am stuck: Now the boot menue shows the grup prompt which seems like: Minimal BASH-like line editing supported... sh:grub> NOTES: I originally installed Ubuntu alongside Windows 7 using Wubi. I can paste the contents "wubildr.cfg" if this helps. I had to go back to my Windows 7 to post this.
View 7 Replies
View Related
